Oracle Fusion Middleware Developer's Guide for Oracle Portal, 11g Release 1 (11.1.1)

11g Release 1 (11.1.1)

E10238-03

Contents

List of Examples

List of Figures

List of Tables

Title and Copyright Information

Preface

- Intended Audience

- Documentation Accessibility

- Related Documents

- Conventions

Part I Portlet Overview

1 Understanding Portlets

- 1.1 Introduction to Portal Development

- 1.2 Understanding Portlets

- 1.3 Portlet Anatomy

- 1.4 Portlet Resources

- 1.4.1 Out-of-the-Box Portlets

- 1.4.2 Other Sources of Prebuilt Portlets

- 1.4.3 Web Clipping

- 1.4.4 OmniPortlet

- 1.4.5 Portlet Builder

- 1.4.6 JSF Portlets

- 1.4.7 Programmatic Portlets

- 1.4.8 Deciding Which Tool to Use

2 Portlet Technologies Matrix

- 2.1 The Portlet Technologies Matrix

- 2.2 General Suitability

- 2.2.1 Web Clipping

- 2.2.2 OmniPortlet

- 2.2.3 Java Portlets

- 2.2.4 Portlet Builder

- 2.2.5 PL/SQL Portlets

- 2.3 Expertise Required

- 2.3.1 Web Clipping

- 2.3.2 OmniPortlet

- 2.3.3 Java Portlets

- 2.3.4 Portlet Builder

- 2.3.5 PL/SQL Portlets

- 2.4 Deployment Type

- 2.4.1 Web Providers

- 2.4.2 WSRP Producers

- 2.4.3 Database Providers

- 2.4.4 Provider Architecture

- 2.4.5 Provider Registration

- 2.5 Caching Style

- 2.5.1 Web Clipping, OmniPortlet, and Portlet Builder

- 2.5.2 Java Portlets

- 2.5.3 PL/SQL Portlets

- 2.6 Development Tool

- 2.6.1 Web Clipping, OmniPortlet, and Portlet Builder

- 2.6.2 Java Portlets

- 2.6.3 PL/SQL Portlets

- 2.7 Portlet Creation Style

- 2.7.1 OmniPortlet and Web Clipping

- 2.7.2 Java Portlets

- 2.7.3 Portlet Builder

- 2.7.4 PL/SQL Portlets

- 2.8 User Interface Flexibility

- 2.8.1 Web Clipping

- 2.8.2 OmniPortlet

- 2.8.3 Java Portlets and PL/SQL Portlets

- 2.8.4 Portlet Builder

- 2.9 Ability to Capture Content from Web Sites

- 2.9.1 Web Clipping

- 2.9.2 OmniPortlet

- 2.9.3 Java Portlets

- 2.9.4 PL/SQL Portlets

- 2.10 Ability to Render Content Inline

- 2.10.1 Web Clipping

- 2.10.2 OmniPortlet

- 2.10.3 Java Portlets

- 2.10.4 Portlet Builder

- 2.10.5 PL/SQL Portlets

- 2.11 Charting Capability

- 2.11.1 Web Clipping

- 2.11.2 OmniPortlet

- 2.11.3 Java Portlets

- 2.11.4 Portlet Builder

- 2.11.5 PL/SQL Portlets

- 2.12 Public Portlet Parameters Support

- 2.13 Private Portlet Parameter Support

- 2.13.1 OmniPortlet, Web Clipping, and Portlet Builder

- 2.13.2 Java Portlets and PL/SQL Portlets

- 2.14 Event Support

- 2.14.1 Web Clipping, OmniPortlet, and Java Portlets

- 2.14.2 Portlet Builder and PL/SQL Portlets

- 2.15 Ability to Hide and Show Portlets Based on User Privileges

- 2.15.1 Web Clipping and OmniPortlet

- 2.15.2 Java Portlets

- 2.15.3 Portlet Builder

- 2.15.4 PL/SQL Portlets

- 2.16 Multilingual Support

- 2.16.1 Web Clipping, OmniPortlet, Java Portlets, and PL/SQL Portlets

- 2.16.2 Portlet Builder

- 2.17 Pagination Support

- 2.17.1 Web Clipping

- 2.17.2 OmniPortlet

- 2.17.3 Java Portlets and PL/SQL Portlets

- 2.17.4 Portlet Builder

- 2.18 Single Sign-On and External Application Integration

- 2.18.1 Web Clipping

- 2.18.2 OmniPortlet

- 2.18.3 Java Portlets

- 2.18.4 PL/SQL Portlets

Part II Creating Portlets

3 Creating Portlets with OmniPortlet

- 3.1 Introduction to OmniPortlet

- 3.2 The OmniPortlet Wizard

- 3.2.1 Type

- 3.2.2 Source

- 3.2.2.1 Proxy Authentication

- 3.2.2.2 Connection Information

- 3.2.2.3 Spreadsheet

- 3.2.2.4 SQL

- 3.2.2.5 XML

- 3.2.2.6 Web Service

- 3.2.2.7 Web Page

- 3.2.3 Filter

- 3.2.4 View

- 3.2.5 Layout

- 3.2.5.1 Tabular Layout

- 3.2.5.2 Chart Layout

- 3.2.5.3 News Layout

- 3.2.5.4 Bullet Layout

- 3.2.5.5 Form Layout

- 3.2.5.6 HTML Layout

- 3.2.6 Edit Defaults mode

- 3.2.7 Events

- 3.3 Parameters and Events

- 3.3.1 Portlet Parameters and Events

- 3.3.2 Page Parameters and Events

4 Building Example Portlets with OmniPortlet

- 4.1 Adding an OmniPortlet Instance to a Portal Page

- 4.2 Building an OmniPortlet Based on a Web Service

- 4.3 Building an OmniPortlet Based on a Spreadsheet (CSV)

- 4.4 Building an OmniPortlet Based on an XML Data Source

- 4.5 Building an OmniPortlet Based on a Web Page Data Source

- 4.6 Setting Up Portlet Parameters and Events

- 4.6.1 Configure Portlets to Accept Parameters

- 4.6.2 Map the Page Parameter to the Portlet Parameters

- 4.6.3 Configure the Chart Portlet to Use Events

- 4.6.4 Map the Chart Event to the Page

- 4.7 Building an OmniPortlet Using the HTML Layout

5 Creating Content-Based Portlets with Web Clipping

- 5.1 What Is Web Clipping?

- 5.2 Adding Web Page Content to a Portal Page

- 5.2.1 Adding a Web Clipping Portlet to a Page

- 5.2.2 Selecting a Section of a Web Page to Display in the Web Clipping Portlet

- 5.2.3 Setting Web Clipping Portlet Properties

- 5.3 Integrating Authenticated Web Content Using Single Sign-On

- 5.4 Adding a Web Clipping That Users Can Personalize

- 5.4.1 Adding a Web Clipping Portlet to a Personal Page

- 5.4.2 Selecting a Clipping in OTN

- 5.4.3 Personalizing a Web Clipping Portlet

- 5.5 Using Web Clipping Open Transport API

- 5.6 Migrating from URL-Based Portlets

- 5.6.1 Preparing for Migration

- 5.6.2 Performing the Migration

- 5.6.3 Post-Migration Configuration

- 5.6.4 Maintaining Migrated Portlets

- 5.6.5 Limitations in Migrating URL-Based Portlets

- 5.7 Current Limitations for Web Clipping

6 Creating Java Portlets

- 6.1 Guidelines for Writing Java Portlets

- 6.1.1 Guidelines for Show Modes

- 6.1.1.1 Shared Screen Mode (View Mode for JPS)

- 6.1.1.2 Edit Mode (JPS and Pdk-Java)

- 6.1.1.3 Edit Defaults Mode (JPS and PDK-Java)

- 6.1.1.4 Preview Mode (JPS and PDK-Java)

- 6.1.1.5 Full Screen Mode (PDK-Java)

- 6.1.1.6 Help Mode (JPS and Oracle Portal)

- 6.1.1.7 About Mode (JPS and PDK-Java)

- 6.1.1.8 Link Mode (PDK-Java)

- 6.1.2 Guidelines for Navigation within a Portlet

- 6.1.2.1 Types of Links for Portlets

- 6.1.3 Guidelines for JavaScript

- 6.1.4 Guidelines for Mobile Portlets

- 6.1.4.1 Declare Capabilities

- 6.1.4.2 Declare a Short Title

- 6.1.4.3 Implement Personalization of the Short Title

- 6.1.4.4 Implement Link Mode

- 6.1.4.5 Heed Device Information

- 6.1.4.6 Tailor Personalization Pages

- 6.2 Introduction to Java Portlet Specification (JPS) and WSRP

- 6.3 Building JPS-Compliant Portlets with Oracle JDeveloper

- 6.3.1 Creating a JSR 168 Portlet

- 6.3.2 Adding Portlet Logic to Your JSR 168 Portlet

- 6.3.3 Deploying Your JSR 168 Portlet to the Oracle WebLogic Server

- 6.3.4 Registering and Viewing Your JSR 168 Portlet

- 6.3.5 Registering WSRP Producers in Enterprise Configurations

- 6.4 Introduction to Oracle PDK-Java

- 6.5 Building Oracle PDK-Java Portlets with Oracle JDeveloper

- 6.5.1 Creating an Oracle PDK-Java Portlet and Provider

- 6.5.2 Adding Portlet Logic to Your Oracle PDK-Java Portlet

- 6.5.3 Validating Your Oracle PDK-Java Portlet and Provider

- 6.5.4 Deploying Your Oracle PDK-Java Portlet to an Application Server

- 6.5.5 Registering and Viewing Your Oracle PDK-Java Portlet

- 6.6 Setting up the WSRP and JPDK Applications in Oracle Portal

- 6.6.1 Configuring and Deploying the WSRP

- 6.6.2 Configuring and Deploying the JPDK

7 Enhancing Java Portlets

- 7.1 Enhancing JPS Portlets

- 7.1.1 Adding Personalization

- 7.1.1.1 Assumptions

- 7.1.1.2 Implementing Personalization

- 7.2 Enhancing PDK-Java Portlets

- 7.2.1 Adding Show Modes

- 7.2.1.1 Assumptions

- 7.2.1.2 Implementing Extra Show Modes

- 7.2.1.3 Updating the XML Provider Definition

- 7.2.1.4 Viewing the Portlet

- 7.2.2 Adding Personalization

- 7.2.2.1 Assumptions

- 7.2.2.2 Implementing Personalization for Edit and Edit Defaults Pages

- 7.2.2.3 Implementing Personalization for Show Pages

- 7.2.2.4 Preference Information Within the XML Provider Definition

- 7.2.2.5 Viewing the Portlet

- 7.2.3 Passing Parameters and Submitting Events

- 7.2.3.1 Assumptions

- 7.2.3.2 Adding Public Parameters

- 7.2.3.3 Passing Private Portlet Parameters

- 7.2.3.4 Submitting Events

- 7.2.4 Using JNDI Variables

- 7.2.4.1 Declaring JNDI Variables

- 7.2.4.2 Setting JNDI Variable Values

- 7.2.4.3 Retrieving JNDI Variables

- 7.2.5 Creating Private Events

- 7.2.6 Accessing Session Information

- 7.2.6.1 Assumptions

- 7.2.6.2 Implementing Session Storage

- 7.2.6.3 Viewing the Portlet

- 7.2.7 Implementing Portlet Security

- 7.2.7.1 Assumptions

- 7.2.7.2 Introduction to Portlet Security Features

- 7.2.7.3 Single Sign-On

- 7.2.7.4 Oracle Portal Access Control Lists (ACLs)

- 7.2.7.5 Portlet Security Managers

- 7.2.7.6 Oracle Portal Server Security

- 7.2.7.7 Message Authentication

- 7.2.7.8 HTTPS Communication

- 7.2.7.9 LDAP (Oracle Internet Directory) Security

- 7.2.7.10 User Input Escape

- 7.2.8 Controlling the Export/Import of Portlet Personalizations

- 7.2.8.1 Import/Export Programming Interface

- 7.2.8.2 Exporting Personalizations Example

- 7.2.8.3 Implementing Security for Export/Import

- 7.2.9 Enhancing Portlet Performance with Caching

- 7.2.9.1 Assumptions

- 7.2.9.2 Activating Caching

- 7.2.9.3 Adding Expiry-Based Caching

- 7.2.9.4 Adding Invalidation Based Caching

- 7.2.9.5 Adding Validation-Based Caching

- 7.2.10 Enhancing Portlets for Mobile Devices

- 7.2.10.1 Accessing Configuration, User, and Device Information

- 7.2.10.2 Modifying Navigation for Mobile Portlets

- 7.2.11 Writing Multilingual Portlets

- 7.2.11.1 Assumptions

- 7.2.11.2 Internationalizing Your Portlet

- 7.2.11.3 Viewing the Portlet

- 7.3 Building Struts Portlets with Oracle JDeveloper

- 7.3.1 Oracle Portal and the Apache Struts Framework

- 7.3.1.1 Model View Controller Overview

- 7.3.1.2 Apache Struts Overview

- 7.3.1.3 Oracle Portal Integration with Struts

- 7.3.1.4 Summary

- 7.3.2 Creating a Struts Portlet

- 7.3.2.1 Creating a Struts Portlet

- 7.3.2.2 Registering the Provider

- 7.3.2.3 Summary

- 7.3.3 Creating an Oracle Application Development Framework (ADF) Portlet

8 Creating PL/SQL Portlets

- 8.1 Guidelines for Creating PL/SQL Portlets

- 8.1.1 Portlet Show Modes

- 8.1.2 Recommended Portlet Procedures and Functions

- 8.1.3 Guidelines for Mobile Portlets

- 8.2 Building PL/SQL Portlets with the PL/SQL Generator

- 8.2.1 Creating the Input XML File

- 8.2.2 Running the PL/SQL Generator

- 8.2.3 Publishing the Generated PL/SQL Portlet

- 8.2.3.1 Installing the Packages in the Database

- 8.2.3.2 Registering the Database Provider

- 8.2.3.3 Adding Your Portlet to a Page

- 8.3 Building PL/SQL Portlets Manually

- 8.3.1 Implementing the Portlet Package

- 8.3.2 Implementing the Provider Package

- 8.3.3 Adding Your Portlet to a Page

- 8.4 Implementing Information Storage

- 8.4.1 Implementing a Preference Store

- 8.4.1.1 Using a Preference Store

- 8.4.1.2 Creating and Accessing a Preference Store

- 8.4.2 Implementing a Session Store

- 8.5 Using Parameters

- 8.5.1 Passing Private Parameters

- 8.5.2 Passing Page Parameters and Mapping Public Portlet Parameters

- 8.5.3 Retrieving Parameter Values

- 8.6 Accessing Context Information

- 8.6.1 Using Context Information

- 8.6.2 Using wwctx_api to Obtain Context Information

- 8.7 Implementing Portlet Security

- 8.7.1 Using Security

- 8.7.2 Coding Security

- 8.8 Improving Portlet Performance with Caching

- 8.8.1 Using Caching

- 8.8.1.1 Validation-Based Caching

- 8.8.1.2 Expiry-Based Caching

- 8.8.1.3 Invalidation-Based Caching

- 8.8.2 Configuring and Monitoring the Cache

- 8.8.3 Implementing Validation-Based Caching

- 8.8.4 Implementing Expiry-Based Caching

- 8.8.5 Implementing Invalidation-Based Caching

- 8.9 Implementing Error Handling

- 8.9.1 Using Error Handling

- 8.9.2 Adding Error Handling

- 8.10 Implementing Event Logging

- 8.10.1 Using Event Logging

- 8.10.2 Adding Event Logging

- 8.11 Writing Multilingual Portlets

- 8.11.1 Using Multilingual Support

- 8.11.2 Adding Multilingual Support

- 8.11.2.1 Loading Language Strings

- 8.11.2.2 Retrieving Language Strings

- 8.12 Enhancing Portlets for Mobile Devices

- 8.13 Registering Providers Programmatically

- 8.13.1 Registration Prerequisites

- 8.13.2 Provider Record Input

- 8.13.3 Registration Example

Part III Content Management APIs

9 Content Management API Introduction

- 9.1 Overview

- 9.2 Content Management APIs

- 9.2.1 Secure Content Repository Views

- 9.2.2 Terminology

- 9.3 Providing Access to the APIs and Secure Views

- 9.4 Guidelines for Using the APIs

- 9.4.1 Using a Separate Schema

- 9.4.2 Using Constants

- 9.4.3 Invalidating the Cache

- 9.4.4 Issuing Commits

- 9.4.5 Resetting CMEF Global Variables

- 9.4.6 Using Predefined Exceptions

- 9.4.7 Naming Objects

- 9.5 Guidelines for Using the Secure Views

- 9.5.1 Identifying Primary Keys

- 9.5.2 Querying Translatable Objects

- 9.5.3 Selecting Data for the Current User

- 9.6 Code Samples

10 Getting Started with Content Management APIs

- 10.1 Setting the Session Context

- 10.2 API Parameters

- 10.3 Finding an Object ID

- 10.3.1 Finding a Page Group ID

- 10.3.2 Finding a Page ID

- 10.3.3 Finding Region IDs

- 10.3.4 Finding an Item ID

11 Performing Simple Content Management Tasks

- 11.1 Editing Page Properties

- 11.2 Editing Content

- 11.2.1 Setting Item Attributes

- 11.2.2 Editing an Item

- 11.2.3 Checking Items Out and In

- 11.2.4 Using Version Control

- 11.3 Reorganizing Content

- 11.3.1 Moving an Item to a Different Page

- 11.3.2 Moving Pages

- 11.3.3 Moving Categories and Perspectives

- 11.4 Copying Content

- 11.4.1 Copying Items

- 11.4.2 Copying Pages

- 11.5 Deleting Content

- 11.5.1 Deleting Items

- 11.5.2 Deleting Pages

12 Extending Your Portal

- 12.1 Creating a Page Group

- 12.2 Creating Pages

- 12.3 Creating Categories and Perspectives

- 12.4 Creating Items

- 12.5 Setting Perspectives Attributes of Pages and Items

- 12.6 Approving and Rejecting Items

13 Searching Portal Content

- 13.1 Searching For Items Across All Page Groups

- 13.2 Searching For Pages in Specific Page Groups

- 13.3 Searching For Items By Attribute

- 13.4 Transforming Search Results into XML

- 13.4.1 Creating a Directory for the XML File

- 13.4.2 Creating an XML File from a CLOB

- 13.4.3 Generating Search Results in XML

- 13.4.4 Workaround for get_item_xml

- 13.5 Displaying Search Results

- 13.5.1 Displaying XML Search Results in OmniPortlet

- 13.5.2 Displaying Search Results in a Dynamic Page

14 Creating Multi-Lingual Content

- 14.1 Introduction to Multi-Lingual Support

- 14.2 Querying the Default Language

- 14.3 Setting the Session Language

- 14.4 Modifying an Existing Translation

- 14.5 Creating a Translation for an Item

- 14.6 Translations and Item Versioning

15 Implementing Content Security

- 15.1 Retrieving Object Privileges

- 15.2 Setting Page Level Privileges

- 15.2.1 Granting Page Level Privileges

- 15.2.2 Removing Page Level Privileges

- 15.3 Setting Item Level Privileges

- 15.3.1 Granting Item Level Privileges

- 15.3.2 Removing Item Level Privileges

- 15.3.3 Inheriting Item Level Privileges from the Page

16 Using the Content Management Event Framework

- 16.1 What Is the Content Management Event Framework?

- 16.2 How Does the Content Management Event Framework Work?

- 16.2.1 Enqueuing Messages

- 16.2.2 Subscribers and Dequeuing Messages

- 16.2.2.1 Adding a Subscriber to the WWSBR_EVENT_Q Queue

- 16.2.2.2 Subscriber Queue Management

- 16.2.2.3 Dequeuing Messages

- 16.2.3 Exception Handling

- 16.2.4 Listening for Messages

- 16.3 Using the Content Management Event Framework

- 16.3.1 Creating Subscriber Code

- 16.3.2 Adding a Subscriber to WWSBR_EVENT_Q

- 16.3.3 Enabling CMEF Events at the Page Group Level

- 16.3.4 Examining CMEF Events

- 16.3.5 Running a CMEF Subscriber

- 16.3.6 CMEF Message Payload

- 16.3.7 Oracle Portal Actions and CMEF Events

- 16.3.7.1 Page and Page Group Actions

- 16.3.7.2 Item Actions

- 16.4 Installing the Examples

- 16.5 Example: Portal Object Event Logging

- 16.6 Example: Item Notification

- 16.7 Example: Item Validation

- 16.8 Example: Integrating External Workflow

- 16.8.1 Integrating Workflow with Oracle Portal

- 16.8.2 Example Overview

- 16.8.3 Detailed Example Description

- 16.8.3.1 Enable Approvals and Notifications in Oracle Portal

- 16.8.3.2 Grant Users the Manage Items With Approval Privileges

- 16.8.3.3 Run Scripts Required for the CMEF Workflow Integration Example

- 16.8.3.4 Create Subscriber and Check Procedures

- 16.8.3.5 Register the WF_CHECKURL Process with Oracle Workflow

- 16.8.3.6 Add the CMEF_WORKFLOW Subscriber to the WWSBR_EVENT_Q Queue

Part IV Appendixes

A Creating Portlets with the Portlet Builder

B Troubleshooting Portlets and Providers

- B.1 Diagnosing General Portlet Problems

- B.1.1 Portlet Refresh Failure

- B.1.2 HTML Tags Appearing in Portlet

- B.2 Diagnosing Java Portlet Problems

- B.2.1 Portlet Logging

- B.2.2 Installation and Deployment Problems

- B.2.2.1 Cannot Find a Java Class Object

- B.2.2.2 Cannot Deploy the template.ear File

- B.2.2.3 Error When Attempting to Register Provider

- B.2.2.4 Error Adding a Portlet to a Provider

- B.2.2.5 Portlet Does Not Exist

- B.2.2.6 File Not Found

- B.2.2.7 XML Parser Error

- B.2.2.8 Error Adding Portlets

- B.2.2.9 Content Request Timed Out

- B.2.2.10 Message 500 Returned

- B.2.2.11 JPS Portlets with the get Method not Working

- B.2.2.12 Portlet Displays Session Expired Message After Redeployment

- B.2.3 Portlet Code Does Not Compile

- B.2.4 Application Server Connection Test Fails

- B.2.5 Provider Test Page Shows Error

- B.2.6 Web Provider Not Appearing in Portlet Repository

- B.2.7 Portlet Does Not Display on Page

- B.2.8 After Initial Successful Display, Portlet Does Not Display on Page

- B.3 Diagnosing OmniPortlet Problems

- B.3.1 OmniPortlet Cannot Access the Specified URL

- B.3.2 Portlet Content Is Not Refreshed

- B.3.3 Edit Defaults Changes are Not Reflected in the Personalized Portlet

- B.4 Diagnosing Web Clipping Problems

- B.4.1 Setting Logging Levels

- B.4.2 Reviewing Error Messages

- B.4.3 Checking the Status of the Provider with the Test Page

- B.4.4 Problem Connecting to the Web Site for Clipping

- B.4.5 HTTP Error Code 407 When Clipping Outside Firewall

- B.4.6 Cannot Clip a Page

- B.4.7 Images Not Retrieved with Clipping

- B.4.8 Resolving Problems with Migration of URL-based Portlets

- B.4.8.1 File Not Found Exception When Running Migration Tool

- B.4.8.2 Null Pointer Exception When Running Migration Tool

- B.4.8.3 Target provider.xml is Already Migrated Error

- B.4.8.4 Cannot Migrate provider.xml with Class Error

- B.5 Need More Help?

C Mapping Profile Items to Attributes

- C.1 Mapping userProfileItems to Attributes

D Manually Packaging and Deploying PDK-Java Providers

- D.1 Introduction

- D.1.1 WAR and EAR files

- D.1.2 Service Identifiers

- D.2 Packaging and Deploying Your Providers

- D.2.1 Packaging Your Provider

- D.2.1.1 Preparing Your Directories

- D.2.1.2 Specifying Your Default Service

- D.2.1.3 Creating Your WAR File

- D.2.1.4 Creating Your EAR File

- D.2.2 Deploying Your EAR File Using Fusion Middleware Control

- D.2.3 Testing Deployment

- D.2.4 Setting Deployment Properties

- D.2.5 Securing Your Provider

- D.2.6 Registering Your Provider

E Oracle Portal Provider Test Suite

- E.1 Provider Test Page

- E.2 Test Harness

- E.2.1 Test Definition File

- E.2.2 runTest Command

- E.2.3 Running a Test with Test Harness

F Content Management APIs and Views

- F.1 Supported APIs

- F.1.1 The WWSBR_API Package

- F.1.2 The WWSRC_API Package

- F.1.3 The WWSEC_API Package

- F.1.4 The WWCTX_API Package

- F.1.5 The WWPRO_API_INVALIDATION Package

- F.2 Secure Views

- F.2.1 WWSBR_ALL_CATEGORIES

- F.2.2 WWSBR_ALL_CONTENT_AREAS

- F.2.3 WWSBR_ALL_FOLDER_REGIONS

- F.2.4 WWSBR_ALL_FOLDERS

- F.2.5 WWSBR_ALL_ITEMS

- F.2.6 WWSBR_ALL_NAVIGATION_BARS

- F.2.7 WWSBR_ALL_PERSPECTIVES

- F.2.8 WWSBR_ALL_STYLES

- F.2.9 WWSBR_APPROVER

- F.2.10 WWSBR_ATTRIBUTES

- F.2.11 WWSBR_CONTENT_AREA_APPROVAL

- F.2.12 WWSBR_CONTENT_AREA_ITEM_TYPES

- F.2.13 WWSBR_FOLDER_ATTRIBUTES

- F.2.14 WWSBR_FOLDER_PERSPECTIVES

- F.2.15 WWSBR_FOLDER_TYPE_ATTRIBUTES

- F.2.16 WWSBR_FOLDER_TYPES

- F.2.17 WWSBR_ITEM_APPROVAL

- F.2.18 WWSBR_ITEM_ATTRIBUTES

- F.2.19 WWSBR_ITEM_PERSPECTIVES

- F.2.20 WWSBR_ITEM_TYPE_ATTRIBUTES

- F.2.21 WWSBR_ITEM_TYPES

- F.2.22 WWSBR_SUBSCRIPTION

- F.2.23 WWSBR_USER_FOLDERS

- F.2.24 WWSBR_USER_PAGES

G Content Management Event Framework Events

- G.1 Actions and Events for Items

- G.2 Actions and Events for Pages

- G.3 Actions and Events for Tabs

- G.4 Actions and Events for Page Groups

- G.5 Actions and Events for Attributes

- G.6 Actions and Events for Item Types

- G.7 Actions and Events for Page Types

- G.8 Actions and Events for Categories

- G.9 Actions and Events for Perspectives

- G.10 Actions and Events for Templates

Glossary

Index

List of Examples

- 6-1 WSRP Producer WSDL Page

- 9-1 Calling the clear_cmef_context API

- 9-2 Using Predefined Exceptions

- 9-3 Joining an Item to Its Page

- 9-4 Selecting a Translated Page Display Name

- 9-5 Selecting Items Created by the Current User

- 10-1 Setting the Session Context (set_context API)

- 10-2 Finding the ID of a page group

- 10-3 Function to Find the ID of a Page Group

- 10-4 Finding the ID of Page in a Known Page Group

- 10-5 Finding the IDs for a Page and Its Page Group Given Page and Page Group Names

- 10-6 Finding the IDs and Types of Insertable Regions on a Given Page

- 10-7 Finding the ID of the Current Version of an Item Given its Master Item ID

- 10-8 Finding Item IDs

- 11-1 Editing Page Properties

- 11-2 Setting the Display Name of an Item (set_attribute API)

- 11-3 Editing an Item (modify_item API)

- 11-4 Checking an Item Out and In (check_out_item and check_in_item)

- 11-5 Creating a New Version of an Item (modify_item API)

- 11-6 Moving an Item to a Different Page Group (move_item API)

- 11-7 Moving a Page (move_folder API)

- 11-8 Moving a Category (move_category API)

- 11-9 Moving a Perspective (move_perspective API)

- 11-10 Creating a Copy of an Item in a Different Page Group (copy_item API)

- 11-11 Creating a Copy of a Page (copy_folder API)

- 11-12 Deleting an Item (delete_item API)

- 11-13 Restoring a Previously Deleted Item (undelete_item API)

- 11-14 Deleting a Page (delete_folder API)

- 12-1 Creating a Page Group (add_content_area API)

- 12-2 Creating a Page (add_folder API)

- 12-3 Creating a Category (add_category API)

- 12-4 Creating a Perspective (add_perspective API)

- 12-5 Creating a Text Item (add_item API)

- 12-6 Creating a File Item (add_item API)

- 12-7 Uploading a File to the Content Repository and Creating a File Item Using the Uploaded File (upload_blob API and add_item_post_upload API)

- 12-8 Specifying Perspectives When Creating a Page

- 12-9 Specifying Perspectives When Creating an Item

- 12-10 Approving an Item

- 12-11 Rejecting an Item

- 13-1 Searching Across All Page Groups (item_search API)

- 13-2 Searching in Specific Page Groups (page_search API)

- 13-3 Searching Specific Attributes (specify_attributes API)

- 13-4 Writing an XML File to a Specific File System Location

- 13-5 Generating Search Results in XML (get_all_items_xml API)

- 13-6 Using get_item_xml to Write Search Results to a File

- 13-7 Procedure to Perform the Search

- 13-8 Code for Dynamic Page to Display Results

- 14-1 Setting the Session Language (set_nls_language API)

- 14-2 Modifying a Translation

- 14-3 Creating a Translation

- 15-1 Retrieving the List of Privileges for a Page (grantee_list API)

- 15-2 Retrieving the List of Privileges for an Item

- 15-3 Granting Page Privileges to a Group (set_group_acl API)

- 15-4 Granting Page Privileges to a User (set_user_acl API)

- 15-5 Removing Page Privileges from a Group (remove_group_acl API)

- 15-6 Removing Page Privileges from a User (remove_user_acl API)

- 15-7 Enabling Item Level Security for a Page

- 15-8 Enabling Item Level Security for an Item (enable_ils_for_item API)

- 15-9 Granting Item Level Privileges to Users (add_item_ils_privileges API)

- 15-10 Removing Item Level Privileges (delete_ils_privilege API)

- 15-11 Inheriting Item Privileges from the Parent Page (inherit_folder_privileges API)

- 16-1 Adding a Subscriber to WWSBR_EVENT_Q

- 16-2 Dequeuing Messages

- 16-3 Listening to Messages on Multiple Queues

- 16-4 Listening and Dequeuing Messages

- 16-5 An Example Subscriber

- 16-6 Adding a Subscriber to WWSBR_EVENT_Q

- 16-7 Running a Subscriber

- 16-8 The CMEF_LOG_TABLE

- 16-9 The LOG_PORTAL_EVENT Subscriber

- 16-10 Adding the LOG_PORTAL_EVENT Subscriber to WWSBR_EVENT_Q

- 16-11 Running the LOG_PORTAL_EVENT CMEF Subscriber

- 16-12 The CMEF_ITEM_NOTIFY Subscriber

- 16-13 Using DMBS_JOB

- 16-14 CSBR_UTIL Package

- 16-15 The HTML E-mail Procedure

- 16-16 The ITEM_VALIDATION CMEF Subscriber

- 16-17 The WORKFLOW_APPROVAL Subscriber

- 16-18 The CHECK_URL Procedure

- 16-19 Adding the CMEF_WORKFLOW Subscriber to WWSBR_EVENT_Q

List of Figures

- 1-1 Portlets on the My Oracle Home Page

- 1-2 The Oracle News Portlet on the My Oracle Home Page

- 1-3 Content Target from a Portlet Link

- 1-4 Portlet Anatomy

- 1-5 The Portlet Repository

- 1-6 Selecting Web Content through the Web Clipping Studio

- 1-7 Clipped Content Rendered as a Portlet in Portal

- 1-8 An OmniPortlet Using Tabular Format

- 1-9 Sample Form, Report, and Chart from the Portlet Builder

- 1-10 Portlet Resources from Page Designers to Experienced Developers

- 2-1 Portlet Provider Overview

- 2-2 Web Providers

- 2-3 Database Providers

- 2-4 Provider Architecture

- 2-5 Portlet Creation Style

- 3-1 Type Tab of the OmniPortlet Wizard

- 3-2 Source Tab: Connection and Portlet Parameters Section

- 3-3 Edit Connection Page

- 3-4 Source Tab: Spreadsheet

- 3-5 Source Tab: SQL

- 3-6 Connection Information on the SQL Source Tab

- 3-7 Edit Connection Page with DataDirect Driver

- 3-8 Source Tab: XML

- 3-9 Source Tab: Web Service

- 3-10 Source Tab: Web Page

- 3-11 Filter Tab

- 3-12 View Tab

- 3-13 Layout Tab: Tabular Style

- 3-14 Example of an OmniPortlet Using a Tabular Layout

- 3-15 Layout Tab: Chart

- 3-16 Example of the Layout Tab for a Pie Chart Layout

- 3-17 Example of an OmniPortlet Using a Pie Chart Layout

- 3-18 Layout Tab: News

- 3-19 Example of an OmniPortlet Using a News Layout

- 3-20 Layout Tab: Bullet

- 3-21 Example of an OmniPortlet Using a Bullet Layout

- 3-22 Layout Tab: Form

- 3-23 Open In New Window Check Box

- 3-24 Example of an OmniPortlet Using a Form Layout

- 3-25 Layout Tab: HTML

- 3-26 Example of an OmniPortlet Using the HTML Layout

- 3-27 Events Tab of the OmniPortlet Wizard

- 3-28 Source Tab: Portlet Parameters Section

- 3-29 Events Tab

- 4-1 Portal Page with Four OmniPortlet Examples

- 4-2 OmniPortlet Instance on a Portal Page

- 4-3 OmniPortlet: Web Service Test Results Page

- 4-4 OmniPortlet: Web Service Source Tab

- 4-5 OmniPortlet: Web Service View Tab

- 4-6 OmniPortlet: Web Service Portlet

- 4-7 OmniPortlet: Character-Separated Values (CSV) Layout Tab

- 4-8 OmniPortlet: CSV OmniPortlet on the Page

- 4-9 OmniPortlet: XML Layout Tab - News Style

- 4-10 OmniPortlet: News Style Column Layout

- 4-11 Column Layout Section of the Layout Tab

- 4-12 OmniPortlet: XML Scrolling News OmniPortlet on the Page

- 4-13 URL Location Field

- 4-14 Web Clipping Studio Containing the www.wunderground.com Home Page

- 4-15 Entering the Zip Code 94065 into the Weather Field

- 4-16 Weather Information for Redwood City, California

- 4-17 The Section Button

- 4-18 Web Clipping Studio Displaying the Web Page Sections

- 4-19 Weather Information for San Francisco Bay Shoreline with the Choose Icon

- 4-20 Weather Information Section for San Mateo County in the Web Clipping Studio

- 4-21 The Scrape Button

- 4-22 Scraping Check Boxes

- 4-23 Check Box for San Mateo County Title

- 4-24 San Mateo County Label in Data Section

- 4-25 Selected Weather Information

- 4-26 The Continue Button

- 4-27 Clipping Attributes Section of the Web Clipping Studio

- 4-28 Clipping Parameters Section of the Web Clipping Studio

- 4-29 Web Page Source Tab

- 4-30 Clipping Parameter to Portlet Parameter Mapping

- 4-31 Portlet Parameters Section

- 4-32 View Tab with the Options Selected

- 4-33 Layout Tab

- 4-34 Weather Information Portlet on the Portal Page

- 4-35 Portal Page Displaying the Four Example OmniPortlets

- 4-36 Edit Defaults Icon in the Web Services Portlet

- 4-37 param0 Set to ##Param1##

- 4-38 Portlet Parameters Section of the Web Services Source Tab

- 4-39 Edit Defaults Icon for the Web Page Portlet

- 4-40 Portlet Parameters Section of the Web Page Source Tab

- 4-41 Page: Properties Link

- 4-42 New Page Parameter

- 4-43 Default Value for the "zip" Page Parameter

- 4-44 Portlet Parameter Values Section

- 4-45 Portlet Parameters Section of the Page Parameters Tab

- 4-46 Edit Defaults Icon for the Chart Portlet

- 4-47 Events Tab for the Chart Portlet

- 4-48 Portlet Events Section of the Page Events Tab

- 4-49 Page Input on the Events Tab

- 4-50 Weather Forecast (Web Service) Portlet for New York

- 4-51 Weather Information (Web Page) Portlet for New York

- 4-52 OmniPortlet Using the HTML Layout

- 4-53 Initial View of an OmniPortlet Using the HTML Layout

- 4-54 Final View of an OmniPortlet Using the HTML Layout

- 5-1 Selecting a Page

- 5-2 Adding a Portlet to a Page

- 5-3 Web Clipping Portlet Added to a Page

- 5-4 Editing Default Settings

- 5-5 Specifying a URL

- 5-6 Browsing to a Page Containing Content for a Web Clipping

- 5-7 Sectioning the Target Web Page

- 5-8 Sectioned Target Web Page

- 5-9 Clipped Content Added to the Web Clipping Portlet on a Portal Page

- 5-10 Properties Section of Find a Web Clipping Page

- 5-11 Creating an External Application

- 5-12 Specifying Redirection

- 5-13 Specifying an External Application for a Web Clipping Provider

- 5-14 External Application in Web Clipping Studio

- 5-15 Properties of the External Application

- 5-16 External Application Displayed in Portlet

- 5-17 Expanding Page Group Map Nodes

- 5-18 Searching for Information on OTN

- 5-19 Sectioning the Target Web Page

- 5-20 Selected Web Clipping Displayed in Web Clipping Portlet

- 5-21 Clicking Edit Defaults for the Web Clipping Portlet

- 5-22 Setting Properties for a Web Clipping

- 5-23 Specifying Parameters for User Input

- 5-24 Clicking Personalize in the Web Clipping Portlet Header

- 5-25 Specifying Input for Parameters

- 5-26 New Web Clipping Result Based on Customer Input Parameter

- 6-1 Oracle Portal Link Types

- 6-2 Mobile-enabled Icon

- 6-3 WSRP Specification Architecture

- 6-4 Oracle Portal's WSRP Architecture

- 6-5 New Gallery Dialog Box for Standards-based Java Portlet

- 6-6 General Portlet Information Page

- 6-7 The Additional Portlet Information page

- 6-8 Content Types and Portlet Modes Page

- 6-9 Content Types Dialog Box

- 6-10 Portlet Modes Dialog Box

- 6-11 Customization Preferences Page

- 6-12 Add New Preference Dialog Box

- 6-13 Security Roles Page

- 6-14 Create New Security Role Dialog Box

- 6-15 Caching Option Page

- 6-16 Initialization Parameters Page

- 6-17 Application Navigator

- 6-18 Register Provider Page

- 6-19 Define Connection Page

- 6-20 Provider Registration Property Values Page

- 6-21 Registration Confirmation Page

- 6-22 New Gallery Dialog Box for Oracle PDK-Java Portlet

- 6-23 Provider Details Page

- 6-24 General Portlet Information Page

- 6-25 View Modes Page

- 6-26 Customize Modes Page

- 6-27 Additional Modes Page

- 6-28 Public Portlet Parameters Page

- 6-29 Public Portlet Events Page

- 6-30 Application Navigator

- 6-31 Portlet Application Test Page

- 6-32 Provider Test Page

- 6-33 PDK - Java Test Page for Portlets

- 6-34 Define Connection Page

- 7-1 edit.jsp in the Design View

- 7-2 Modified edit.jsp in the Design View

- 7-3 Add Portlet Page

- 7-4 Preview Window

- 7-5 Parameter Portlet

- 7-6 Public Portlet Events Page of Portlet Wizard

- 7-7 Portlet Events in the Edit Page

- 7-8 My Event Portlet Before Parameter Change

- 7-9 My Event Portlet After Parameter Change

- 7-10 Page and Portlets for Developer

- 7-11 Page and Portlets for Developer/Administrator

- 7-12 Portlet in English

- 7-13 Portlet in French

- 7-14 The MVC Pattern

- 7-15 Integrating Struts Applications with Oracle Portal

- 7-16 Submitting a Blog

- 7-17 Saving a Blog Entry

- 8-1 PL/SQL Generator Page

- 9-1 The MDS Repository

- 13-1 Providing Default Values for Bind Variables

- 13-2 Default Search Results Displayed in the Dynamic Page Portlet

- 13-3 Personalizing Search Criteria

- 13-4 Personalized Search Results Displayed in the Dynamic Page Portlet

- 16-1 The Dequeuing Process

- 16-2 The Page Group Properties Link on the Edit Mode Toolbar

- 16-3 Status of CMEF for a Page Group

- 16-4 Enabling or Disabling CMEF for a Page Group

- 16-5 CMEF Events Page

- 16-6 HTML Table Displaying CMEF Message Payload Values

- 16-7 Process Flow for Workflow Integration with Oracle Portal

- 16-8 Status of Approvals and Notifications for a Page Group

- 16-9 Enabling or Disabling Approvals and Notifications for a Page Group

- 16-10 Specifying That All Users Require Approval for Their Items

- 16-11 The CHECK_FILE Oracle Workflow Process

List of Tables

- 2-1 Portlet Building Technologies Comparison Matrix

- 2-2 OmniPortlet Data Sources

- 3-1 OmniPortlet Wizard and Edit Defaults

- 3-2 Supported Data Source Types

- 4-1 Column Properties for the Weather Forecast Portlet

- 7-1 Events

- 7-2 PDK-Java JNDI Variables

- 7-3 Device Classes

- 7-4 Equivalent HTML and SimpleResult Utilities

- 8-1 Show Mode Constants in wwpro_api_provider

- 8-2 Recommended Functions and Procedures for PL/SQL Portlets

- 8-3 XML Tags for PL/SQL Generator Input

- 8-4 Changes to starter_provider2.pkb

- 8-5 Context Information Function Calls

- 8-6 Portlet Record Attributes

- 8-7 DeviceClass Header Values

- 8-8 Required provider_record Fields

- 9-1 Mapping of Release 1 Terminology to Current Terminology

- 11-1 Editable Page Record Properties

- 11-2 Attribute Values for Base Attributes

- 13-1 Search Results to Secure View Mapping

- 16-1 AQ Message Properties Set by CMEF

- 16-2 CMEF Message Payload Properties

- C-1 userProfileItems Mapping

- D-1 Elements of application.xml

- D-2 JNDI Variables for Provider Deployment

- E-1 runTest Options

- F-1 Secure Content Repository Views

- F-2 WWSBR_ALL_CATEGORIES

- F-3 WWSBR_ALL_CONTENT_AREAS

- F-4 WWSBR_ALL_FOLDER_REGIONS

- F-5 WWSBR_ALL_FOLDERS

- F-6 WWSBR_ALL_ITEMS

- F-7 WWSBR_ALL_NAVIGATION_BARS

- F-8 WWSBR_ALL_PERSPECTIVES

- F-9 WWSBR_ALL_STYLES

- F-10 WWSBR_APPROVER

- F-11 WWSBR_ATTRIBUTES

- F-12 WWSBR_CONTENT_AREA_APPROVAL

- F-13 WWSBR_CONTENT_AREA_ITEM_TYPES

- F-14 WWSBR_FOLDER_ATTRIBUTES

- F-15 WWSBR_FOLDER_PERSPECTIVES

- F-16 WWSBR_FOLDER_TYPE_ATTRIBUTES

- F-17 WWSBR_FOLDER_TYPES

- F-18 WWSBR_ITEM_APPROVAL

- F-19 WWSBR_ITEM_ATTRIBUTES

- F-20 WWSBR_ITEM_PERSPECTIVES

- F-21 WWSBR_ITEM_TYPE_ATTRIBUTES

- F-22 WWSBR_ITEM_TYPES

- F-23 WWSBR_SUBSCRIPTION

- F-24 WWSBR_USER_FOLDERS

- F-25 WWSBR_USER_PAGES

- G-1 Adding and Editing Items

- G-2 Copying and Moving Items

- G-3 Deleting and Restoring Items

- G-4 Defining Item Privileges

- G-5 Item Versioning

- G-6 Item Approvals

- G-7 Adding and Editing Pages

- G-8 Deleting Pages

- G-9 Defining Page Privileges

- G-10 Adding and Editing Tabs

- G-11 Adding and Editing Page Groups

- G-12 Deleting and Purging Page Groups

- G-13 Defining Page Group Privileges

- G-14 Page Group Translations

- G-15 Attributes

- G-16 Item Types

- G-17 Page Types

- G-18 Categories

- G-19 Perspectives

- G-20 Templates

Oracle® Fusion Middleware

Developer's Guide for Oracle Portal

11g Release 1 (11.1.1)

E10238-03

January 2011

Oracle Fusion Middleware Developer's Guide for Oracle Portal, 11g Release 1 (11.1.1)

E10238-03

Copyright © 2004, 2011, Oracle and/or its affiliates. All rights reserved.

Primary Author: Swati Thacker

Contributing Authors: Showvik Roy Chowdhuri, Frank Rovitto, Lalithashree Rajesh, Promila Chitkara, Susan Highmoor, Vanessa Wang, Kumar Dhanagopal

Contributors: Gareth Bryan, Joan Carter, Candace Fender, Tugdual Grall, Helen Grembowicz, Christian Hauser, Peter Henty, Karthik Lakshmanan, Bill Lankenau, Pankaj Mittal, Peter Moskovits, Lei Oh, Jitinder Sethi, Ingrid Snedecor, Julie Tower, Sue Vickers, Alistair Wilson

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Preface

This manual describes how to build portlets for Oracle Portal (Oracle Portal) using a variety of tools and technologies. This manual includes information that helps you understand the various technology choices open to you, choose the technology that best meets your requirements, and use the appropriate tools to build and deploy your portlets.

Intended Audience

This manual is intended primarily for portal developers, but page designers may also find it useful. This manual guides you through the process of first understanding and choosing a portlet technology, and then building your portlets with that technology.

What Is a Portal Developer? A portal developer is a user who writes code to help make a portal meet the specific requirements of an organization. For example, a portal developer may build portlets and make them available to page designers and other users for inclusion on their pages. This type of portal developer is also referred to as a portlet developer. A portal developer may also use the public APIs provided with OracleAS Portal to perform certain portal tasks programmatically, rather than through the product's user interface. A portal developer will generally, although not always, be someone with at least some programming knowledge. The privileges assigned to a portal developer depend on the type of tasks that developer performs.

What Is a Portlet Developer? A portlet developer is a user with the following global privileges: Create All Portal DB Providers and Manage All Shared Components. Since OracleAS Portal offers such a wide spectrum of tools and technologies for building portlets, a portlet developer may or may not have substantial programming background.

Note:

You can find information on using Portlet Builder in Appendix A "Creating Portlets with the Portlet Builder" of the Oracle Fusion Middleware Developer's Guide for Oracle Portal 10g Release 2 (10.1.4) in the Oracle Application Server 10g Release 2 (10.1.2.0.2) library located on the Oracle Technology Network (OTN) (http://www.oracle.com/technology/documentation/appserver.html).

What Is a Page Designer? A page designer, also known as a page manager, is a user with the Manage privilege on a page. A user with this privilege can perform any action on the page and can create sub-pages under the page. The page designer is often responsible for designing the layout (or region configuration) of the page and assigning privileges on the page to other users (for example, to determine who can add content to the page).

The scope of a page designer's control over a page may be limited if the page is based on a template.

For information about the different privileges in Oracle Portal and how these affect the tasks you can perform, see the Oracle Portal User's Guide.

Note:

For the portable document format (PDF) version of this manual, when a URL breaks onto two lines, the full URL data is not sent to the browser when you click it. To get to the correct target of any URL included in the PDF, copy and paste the URL into your browser's address field. In the HTML version of this manual, you can click a link to directly display its target in your browser.

Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.

Related Documents

For more information, see the following manuals in the Oracle Portal documentation set:

- Oracle Fusion Middleware Release Notes

- Oracle Fusion Middleware User's Guide for Oracle Portal

- Oracle Fusion Middleware Administrator's Guide for Oracle Portal

Note:

You can find all documentation related to Oracle Portal on the Oracle Fusion Middleware Documentation Library.

You may also find the following manuals in the Oracle Application Server documentation set useful:

- Oracle Fusion Middleware Concepts

- Oracle Fusion Middleware Administrator's Guide for Oracle HTTP Server

- Oracle Fusion Middleware Administrator's Guide for Oracle Web Cache

- Oracle Fusion Middleware PL/SQL Web Toolkit Reference

Note:

You can find documentation related to Oracle Application Server on OTN (http://www.oracle.com/technology/documentation/index.html).

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

< >

Angle brackets enclose user-supplied names.

[ ]

Brackets enclose optional clauses from which you can choose one or none.

...

Ellipsis points in an example mean that information not directly related to the example has been omitted.

MW_HOME

Represents the full path of the Middleware home.

ORACLE_HOME

Represents the full path of the Oracle home.

ORACLE_INSTANCE

Represents the full path of the instance home associated with ORACLE_HOME.

INFRA_ORACLE_HOME

Represents the full path of the Oracle Application Server Infrastructure Oracle home, and is used where it is necessary to distinguish between the middle tier, Oracle Application Server Infrastructure, or Oracle Metadata Repository.

METADATA_REP_ORACLE_HOME

Represents the full path of the OracleAS Infrastructure home containing the Oracle Metadata Repository, and is used where it is necessary to distinguish between the middle tier, Oracle Application Server Infrastructure, or Oracle Metadata Repository.

Part I

Portlet Overview

Part I contains the following chapters:

- Chapter 1, "Understanding Portlets"

- Chapter 2, "Portlet Technologies Matrix"

1 Understanding Portlets

This chapter provides an overview of portlets and describes, with help of examples, the use of portlets. It explains portlet anatomy, and the resources to create portlets. This chapter contains the following sections:

- Section 1.1, "Introduction to Portal Development"

- Section 1.2, "Understanding Portlets"

- Section 1.3, "Portlet Anatomy"

- Section 1.4, "Portlet Resources"

1.1 Introduction to Portal Development

Oracle Portal enables you to present information from multiple, unrelated data sources in one, organized view. This view, a portal page, can contain one or more components—called portlets—that can each get their content from different data sources.

Oracle Portal has all the tools you need for developing portlets and adding them to your portal pages. Oracle Portal's tools support a wide range of development skills: from the novice business developer to the experienced IT programmer. You can develop portlets either declaratively, through the Oracle Portal user interface, or programmatically, through Oracle Portal's collection of application programming interfaces (APIs), known as the Oracle Portal Developer Kit (PDK). Additionally, you can develop portlets through other development tools, external to Oracle Portal, and integrate them through the PDK and an Oracle Portal entity called a provider. To learn more about providers, see Chapter 2, "Portlet Technologies Matrix."

This chapter defines portlets, lists and describes some sources for pre-built portlets and resources for building portlets, and suggests the best resource for the job.

1.2 Understanding Portlets

A portlet is a reusable Web component that can draw content from many different sources. A typical portlet is one that displays summaries of Web content, as shown in Figure 1-1.

Figure 1-1 Portlets on the My Oracle Home Page

For example, in your portal you may have a news feed portlet that supplies linked news article headlines that are each accompanied by a sentence describing the content of the article (Figure 1-2).

Figure 1-2 The Oracle News Portlet on the My Oracle Home Page

Users click the linked headlines to get to the full text of the article, which is hosted on an external news service (Figure 1-3). The portlet has a somewhat dynamic nature in that headlines change automatically as news stories are added and removed at the source.

Figure 1-3 Content Target from a Portlet Link

Portlets provide a means of presenting data from multiple sources in a meaningful and related way. Portlets can display excerpts of other Web sites, generate summaries of key information, perform searches, and access assembled collections of information from a variety of data sources. Because different portlets can be placed on a common page, the user receives a single-source experience. In reality, the content may be derived from multiple sources.

1.3 Portlet Anatomy

In Oracle Portal a portlet on a page is rendered in an HTML table cell. A portlet can display various types of content, such as HTML, formatted text, images, or elements of an HTML form.

Figure 1-4 illustrates a typical portlet anatomy. This includes a header that contains the portlet title. You can create a hyperlink in the portlet title, so that when a user clicks the title, the portlet displays in a full browser page. A portlet can also include a border, to distinguish the layout from other portlets on the page.

You, the portlet developer, can expose links such as Personalize, Help, and About, to the page designer, who can then turn them on or off. Clicking the Personalize link displays a number of options where the end user can personalize various attributes of the portlet. Clicking the Help link displays a window containing help text that you can create to assist the end user with the portlet. Clicking the About link displays a window that you can create to describe the contents of the portlet.

Each portlet also contains the refresh icon and a standard collapse icon, which the end user can click to collapse or expand the portlet on the page.

Figure 1-4 Portlet Anatomy

1.4 Portlet Resources

Portlet resources include the many prebuilt portlets available out of the box from many sources, including Oracle Portal, Oracle E-Business Suite, and third-party sources. Portlet resources also include portlet-building tools available through the Oracle Portal user interface as well as from the PDK and other Oracle tools. Each of these tools offers different product features that are targeted toward different developer roles.

This section describes different portlet resources, suggests the level of expertise required to use them, and provides examples of when they might best be used. It includes the following subsections:

- Section 1.4.1, "Out-of-the-Box Portlets"

- Section 1.4.2, "Other Sources of Prebuilt Portlets"

- Section 1.4.3, "Web Clipping"

- Section 1.4.4, "OmniPortlet"

- Section 1.4.5, "Portlet Builder"

- Section 1.4.7, "Programmatic Portlets"

This section introduces you to the various portlet resources. For specific information on each tool and its benefits, see Chapter 2, "Portlet Technologies Matrix."

1.4.1 Out-of-the-Box Portlets

What Are They?

Out-of-the-box portlets are prebuilt, fully developed, registered portlets that are immediately available from the Portlet Repository when you install Oracle Portal (Figure 1-5). They include such portlets as Search, Saved Searches, Favorites, and My Notifications.

Figure 1-5 The Portlet Repository

You'll find information on the prebuilt portlets in Oracle Portal in Oracle Fusion Middleware User's Guide for Oracle Portal.

Who Is the Intended User?

Out-of-the-box portlets are best suited for use by end users and page designers, though they are available to users at all levels of expertise.

When Should They Be Used?

Use out-of-the-box portlets when your needs are satisfied by the functions the portlets offer, and the level of personalization readily available is sufficient to complete the desired task.

Consider alternatives when you need to extend or personalize the portlet, such as when you need a different user interface, or when the functionality you require is not available out of the box.

For more information on when you should use each technology, see Chapter 2, "Portlet Technologies Matrix."

1.4.2 Other Sources of Prebuilt Portlets

What Are They?

Other sources of prebuilt portlets include partner portlets and integration solutions.

Partner portlets are available through Oracle's partnerships with leading system integrators, software vendors, and content providers. You can access these portlets by using the keywords portal or portlet when searching the Oracle PartnerNetwork Solutions Catalog:

http://solutions.oracle.com

Examples of these prebuilt portlets include portlets for the following purposes:

- Generating point-to-point driving directions

- Accessing IT information from a wide variety of sources

- Viewing summary information on news, stocks, and weather

Portal Integration (POINT) Solutions provide solutions for customers who require basic functionality for popular applications such as Microsoft Exchange, Lotus Notes, SAP, IMAP, SMTP, and the like. These portlets are available on the Oracle Portal Integration Solutions page on OTN:

http://www.oracle.com/technology/products/ias/portal/point.html

Who Is the Intended User?

Fully developed, downloadable portlets are best suited for use by end users and page designers who understand how to download, install, and register Web and database providers in Oracle Portal. They are available for use by all levels of experience.

When Should They Be Used?

As with out-of-the-box portlets, use prebuilt portlets from other sources when your needs are satisfied by the functions the portlets offer, and the level of personalization readily available is sufficient to complete the desired task.

Consider alternatives when you need to extend or personalize the portlet, for example, when you need a different user interface or when the functionality you require is not available out of the box.

1.4.3 Web Clipping

What Is It?

Web Clipping is a browser-based declarative tool that enables you to integrate any Web application with Oracle Portal. It is designed to give you quick integration by leveraging the Web application's existing user interface. Web Clipping has been implemented as a Web provider using the PDK-Java, which is a component of Oracle Portal.

To create a Web Clipping portlet, the portal page designer uses a Web browser to navigate to the Web page that contains the desired content. Through the Web Clipping Studio, the page designer can drill down through a visual rendering of the target page to choose the desired the content (Figure 1-6 and Figure 1-7).

Figure 1-6 Selecting Web Content through the Web Clipping Studio

Figure 1-7 Clipped Content Rendered as a Portlet in Portal

Web Clipping supports the following:

- Navigation through various styles of login mechanisms, including form- and JavaScript-based submission and HTTP Basic and Digest Authentication with cookie-based session management.

- Fuzzy matching of clippings. If a Web clipping gets reordered within the source page or if its character font, size, or style changes, it will still be identified correctly by the Web Clipping engine and delivered as the portlet content.

- Reuse of a wide range of Web content, including basic support of pages written with HTML 4.0.1, JavaScript, applets, and plug-in enabled content, retrieved through HTTP GET and POST (form submission).

- Personalization, allowing a page designer to expose input parameters that page viewers can modify when they personalize the portlet. These parameters can be exposed as public parameters that a page designer can map as Oracle Portal page parameters. This feature enables end users to obtain personalized clippings.

- Integrated authenticated Web content through Single Sign-On, including integration with external applications, which enables you to leverage Oracle Application Server Single Sign-On and to clip content from authenticated external Web sites.

- Inline rendering, enabling you to set up Web Clipping portlets to display links within the context of the portlet. As a result, when a user clicks a link in the Web Clipping portlet, the results display within the same portlet. You can use this feature with internal and external Web sites.

- Proxy Authentication, including support for global proxy authentication and per-user authentication. You can specify the realm of the proxy server and whether all users will automatically log in using a user name and password you provide, each user will log in using an individual user name and password, or all users will log in using a specified user name and password.

- Resource Tunnelling of images.

- Open Transport API for customizing authentication mechanisms to clipped sites.

- Security Enhancement that enables administrators to control access to content that can be clipped by the Web Clipping portlet.

- Migration from URL-based portlets, enabling you to migrate your URL-based portlets to Web Clipping.

Who Is the Intended User?

Web Clipping is best suited for use by page designers and portlet developers who want to leverage an existing Web page for rapid portlet development. The Web Clipping portlet is accessible out of the box, and is available in the Portlet Repository of Oracle Portal. This portlet can be added to a page by any user with the appropriate privileges.

When Should It Be Used?

Use Web Clipping when you want to repurpose live content and functionality from an existing Web page and expose it in your portal as a portlet. Consider alternatives if you want to change the way information is presented in the clipped portlet. That is, you don't need to control the user interface or application flow, and you are accessing Web-based applications. For a greater level of control, use OmniPortlet's Web page data source instead of Web Clipping.

The following are some examples of when you might consider using the Web Clipping portlet:

- Stock chart portlet. You want to create a portlet that displays the stock market's daily performance chart from your financial advisor's Web site. You could clip this information from an external Web site, even if your company is using a proxy.

- Personalized weather portlet. You want to create a portlet that displays weather information from a major Internet weather site, and you want your users to be able to personalize the portlet by providing the desired zip code.

- Web mail portlet. Your users want to access their confidential Web mail accounts through a portlet and display their in-boxes in the portlet.

For more information on using Web Clipping, see Chapter 5, "Creating Content-Based Portlets with Web Clipping."

Note:

To use the Web Clipping portlet, OmniPortlet, or the Simple Parameter Form with Windows (2000 with SP4, 2003 (32 bit) with SP2/R2 or later, XP with SP2/R2 or later, Vista, and Server 2008), you must use Firefox 3.0 or later, or Microsoft Internet Explorer 7 or later.

1.4.4 OmniPortlet

What Is It?

OmniPortlet is a declarative portlet-building tool that enables you to build portlets against a variety of data sources, including XML files, character-separated value files (CSV, for example, spreadsheets), Web Services, databases, Web pages, and SAP data sources. OmniPortlet users can also choose a prebuilt layout for the data. Prebuilt layouts include tabular, news, bullet, form, chart, or HTML. HTML layout enables OmniPortlet users to write their own HTML and inject the data into that HTML. Figure 1-8 shows an OmniPortlet with a tabular format.

Figure 1-8 An OmniPortlet Using Tabular Format

Note:

The SAP data source is not included with Oracle Portal. To learn more about using the SAP data source, visit the Oracle Portal Integration Solutions page on OTN:
http://www.oracle.com/technology/products/ias/portal/point.html

Like Web Clipping, OmniPortlet supports proxy authentication, including support for global proxy authentication as well as authentication for each user. You can specify whether all users will automatically log in using a user name and password you provide, each user will log in using an individual user name and password, or all users will log in using a specified user name and password.

You'll find information about OmniPortlet on Portal Center. Navigate to the following URL, then click Portlet Development:

http://portalcenter.oracle.com

Who Is the Intended User?

OmniPortlet is best suited for use by business users with a minimum knowlegde of the URLs to their targeted data.

When Should It Be Used?

Use OmniPortlet when you want to build portlets rapidly against a variety of data sources with a variety of layouts. Consider alternatives when you want complete control of the design and functionality of the portlet.

The following are some examples of when you might consider using OmniPortlet:

- RSS news feed portlet. You want to create a portlet that displays live, scrolling news information to your users. The data comes from a Really Simple Syndication (RSS) news feed, such as the Oracle Technology Network Headlines. You also want the portlet to contain hyperlinks to the news source.

- Sales chart portlet. You want to present up-to-date information on your company's sales results. You also want to display data in the form of a pie chart, and your company stores its sales information in a remote relational database.

- SAP portlet. You want to display information from a company's SAP system. To minimize the load on the company's SAP Business Suite, the information retrieved from the system must be cached for each user for the entire day.

For more information about OmniPortlet, see Chapter 3, "Creating Portlets with OmniPortlet" and Chapter 4, "Building Example Portlets with OmniPortlet."

1.4.5 Portlet Builder

What Is It?

Oracle Portal includes a number of portlet-building wizards that are accessible through the Provider tab in the Portal Navigator. These wizards can be used to build charts, reports, forms, calendars, and lists of values as shown in Figure 1-9.

Figure 1-9 Sample Form, Report, and Chart from the Portlet Builder

When Should It Be Used?

It is recommended that you use OmniPortlet as an alternative to Portlet Builder whenever possible. OmniPortlet provides more flexibility and a separation of data and layout which enables you to change from a report to chart without re-creating the entire portlet (as is required with Portlet Builder). OmniPortlet also provides more options for deployment to many different portals simultaneously. Oracle Portal will continue to support Portlet Builder as a portlet building option. However, new features and enhancements will be directed toward the OmniPortlet tool.

For more information about OmniPortlet, see Section 1.4.4, "OmniPortlet." For more information about Portlet Builder, see Appendix A, "Creating Portlets with the Portlet Builder."

1.4.6 JSF Portlets

What Are They?

JSF portlets are created using the JSF Portlet Bridge. The JSF Portlet Bridge enables application developers to expose their existing JSF applications and task flows as JSR 168 portlets. The portlet bridge simplifies the integration of JSF applications with WSRP portlet consumers, such as Oracle Portal.

JSF portlets do not require separate source code from that of the JSF application. Since these portlets are created using the portlet bridge, you need to only maintain one source for both your application and your portlets. Similarly, when you deploy your JSF application, JSF portlets are also deployed with it. Therefore, using the bridge eliminates the need to store, maintain, and deploy your portlets separately from your application.

Note:

JSF Portlet Bridge integrate Oracle WebCenter Services into Oracle Portal. It is only available if you are using a licensed Oracle WebCentre.

Who Is the Intended User?

Application developers with knowledge of Faces and WSRP.

When Should They Be Used?

JSF portlets are best suited when application developers intend to display contents from a JSF application as a portlet without hosting the entire application, or without separately building a portlet for the same. Once portletized, the consumption of the portlet is the same as registering any WSRP provider using their provider URLs.

For more information, see Oracle Fusion Middleware Developer's Guide for Oracle WebCenter Suite.

1.4.7 Programmatic Portlets

What Are They?

Programmatic portlets are portlets that you write yourself, in Java or PL/SQL. The Oracle PDK contains a set of portlet-building APIs that you can use to create programmatic portlets.

You'll find more information about these APIs on Portal Center:

http://portalcenter.oracle.com

Note:

The PDK-PL/SQL is not described in detail in this manual. For specific information on the PDK-PL/SQL, refer to the Developer Services area on Portal Center:
http://portalcenter.oracle.com

Who Is the Intended User?

These tools are best used by experienced and knowledgeable IT developers.

When Should They Be Used?

Use programmatic portlets when you have very specialized business rules or logic or when you require personalized authentication, granular processing of dynamic results, and complete user interface control. Additionally, use programmatic portlets when you need to satisfy any of the following conditions:

- You're building a portlet from the start and need complete control over all of its functionality.

- You know Java or PL/SQL.

- You are comfortable with the PDK and the configuration of Oracle Portal providers.

Consider using this approach when the out-of-the-box declarative tools do not address your needs.

The following are some examples of when you might consider using Java portlets created with the Oracle Portal Developer Kit:

- Discussion forum portlet. You want to create a portlet that integrates your company's JSP-based discussion forum application with Oracle Portal. The discussion forum posts are stored in a relational database. The portlet must also follow the strict look and feel of your company's Internet Web site.

- E-mail portlet. You want to create a portlet that enables users to send e-mail from the company's intranet portal. You must integrate the e-mail portlet with the company's LDAP server so that the users can use the address book on the LDAP server.

For more information about using the PDK-Java, see Chapter 6, "Creating Java Portlets" and Chapter 7, "Enhancing Java Portlets." For more information about using the PDK-PL/SQL, see Chapter 8, "Creating PL/SQL Portlets."

1.4.8 Deciding Which Tool to Use

Figure 1-10 illustrates the spectrum of portlet resources described in the previous section. Notice how one end of the spectrum is geared toward a more declarative environment as required by page designers while the other end focuses more on hand-coding and portlet developers. You can choose your tool depending on which type of environment is most comfortable and suitable for your skill-base.

For more information on deciding which tool to use, refer to Chapter 2, "Portlet Technologies Matrix".

Figure 1-10 Portlet Resources from Page Designers to Experienced Developers

2 Portlet Technologies Matrix

This chapter describes portlet features, characteristics, technologies, and tools to help you decide which portlet building technology best suits your needs. It includes the following sections:

- Section 2.1, "The Portlet Technologies Matrix"

- Section 2.2, "General Suitability"

- Section 2.3, "Expertise Required"

- Section 2.4, "Deployment Type"

- Section 2.5, "Caching Style"

- Section 2.6, "Development Tool"

- Section 2.7, "Portlet Creation Style"

- Section 2.8, "User Interface Flexibility"

- Section 2.9, "Ability to Capture Content from Web Sites"

- Section 2.10, "Ability to Render Content Inline"

- Section 2.11, "Charting Capability"

- Section 2.12, "Public Portlet Parameters Support"

- Section 2.13, "Private Portlet Parameter Support"

- Section 2.14, "Event Support"

- Section 2.15, "Ability to Hide and Show Portlets Based on User Privileges"

- Section 2.16, "Multilingual Support"

- Section 2.17, "Pagination Support"

- Section 2.18, "Single Sign-On and External Application Integration"

2.1 The Portlet Technologies Matrix

Table 2-1, "Portlet Building Technologies Comparison Matrix" summarizes the technologies and tools you can use with Oracle Portal on one axis, and the features and characteristics on the other. The matrix describes the tools and technologies that are covered in more detail in this guide: OmniPortlet, Web Clipping, the Java Portlets (PDK-Java) including Standards, Portlet Builder as an appendix, and PL/SQL Portlets (PDK-PL/SQL) (in the matrix only).

Note:

While these are the primary tools for building portlets, additional tools and technologies exist, such as other Oracle products, including Oracle Reports and Oracle Business Intelligence Discoverer. These other tools are not covered in this guide.

The other sections in this chapter provide further detail on the characteristics listed in Table 2-1. Use the table to quickly scan all the features and characteristics, then see the subsequent sections for more in-depth information.

Table 2-1 Portlet Building Technologies Comparison Matrix

Web Clipping

OmniPortlet

PDK-Java

Standards

Portlet Builder

PDK-PL/SQL

General Suitability

A simple wizard-based tool that helps you retrieve and present Web content, originating from other Web sites, in your portal.

Wizard-based tool, accessible from the browser. Capable of retrieving and presenting data from a wide variety of data sources.

APIs for portlets built specifically for Oracle Portal.

Portlets that should work with portals of other vendors. Oracle supports both WSRP and JSR-168.

Wizard-based tool, accessible from the browser. Best suited for simple, DB-centric applications or portlets.

APIs for portlets built specifically for Oracle Portal.

Expertise Required

No expertise required.

Basic understanding of one or more supported data sources and the concepts of portlet and page parameters and events.

Java, Servlet, JSP knowledge.

Java, Servlet, JSP knowledge.

Basic understanding of relational DB concepts. Optionally SQL, PL/SQL.

SQL, PL/SQL, PL/SQL Web Toolkit.

Supported Data Sources (for details, see Section 2.3, "Expertise Required")

Any Web site accessible on the network over HTTP or HTTPS.

CSV, XML, Web Service, SAP, SQL, Web site, JCA.

No limitations.

No limitations.

SQL (local DB or remote DB through DB link)

SQL (local DB or remote DB through DB link)

Deployment Type

Web provider

Web provider

Web provider

WSRP

Database provider

Database provider

Caching Style

Expiry-based caching, invalidation-based caching (auto invalidate when personalized).

Expiry-based caching, invalidation-based caching (auto invalidate when personalized).

Expiry-based, validation, and invalidation caching, ESI.

Validation and expiry-based caching.

Expiry-based caching.

Expiry-based, validation, and invalidation caching.

Development Tool

Browser - wizard.

Browser - wizard.

Oracle JDeveloper - Java Portlet Wizard (or any other Java development environment - without the Wizard).

Oracle JDeveloper - Java Portlet Wizard (or any other Java development environment - without the Wizard).

Browser - optionally PL/SQL development environment.

PL/SQL development environment.

Portlet Creation Style

Develop in place.

Develop in place.

No in-place portlet building experience. Add portlet to page, edit defaults, and personalize.

No in-place portlet building experience. Add portlet to page, edit defaults, and personalize.

Develop first, then add and develop in place.

No in-place portlet building experience. Add portlet to page, edit defaults, and personalize.

User Interface Flexibility

N/A

Very flexible, by using the HTML layout.

Very flexible.

Very flexible.

Limited.

Very flexible.

Ability to Capture Content from Web Sites

Yes, by its nature.

Yes, by using the Web Data Source.

Yes, by using the java.net package.

Yes, by using the java.net package.

No

Yes, by using the UTIL_HTTP package.

Ability to Render Content Inline

Yes. (Supported by Web Clipping 9.0.4.0.2 or later.)

No URL rewriting support, but can be achieved by using public portlet parameters and events.

By using private portlet parameters.

Include servlets and JSPs (using the PortletContext.getRequestDispatcher() method).

Pagination in reports and charts is rendered inline.

By using private portlet parameters.

Charting Capability

N/A

Yes, 2D-3D charts.

By using BI Beans.

By using BI Beans.

HTML charts.

Programmatically, HTML charts.

Public Portlet Parameters Support

Yes. (Supported by Web Clipping 9.0.4.0.2 or later.)

Yes

Yes

No

Yes

Yes

Private Portlet Parameter Support

N/A

N/A

Yes

Yes

No

Yes

Event Support

Yes

Yes

Yes

Portlet private events (actions).

No

No

Ability to Hide and Show Portlets Based on User Privileges

No, though it is possible to apply security managers that are not exposed through the UI.

No, though it is possible to apply security managers that are not exposed through the UI.

Yes, by using the Security managers.

Yes, the Servlet security model is supported by using methods such as PortletRequest.isUserInRole() and PortletRequest.getUserPrincipal().

Yes

Yes, by using the Security APIs.

Multilingual Support

N/A

Yes

Yes

Yes

No

Yes

Pagination Support

N/A

No

Programmatically

Programmatically

Yes

Programmatically

Single Sign-On and External Application Integration

Web Clipping 9.0.4.0.2 and higher supports external application integration.

Basic authentication support if the data source requires it.

External application integration supported. LDAP integration is supported when the portlet is running behind the same firewall as the LDAP server.

No. (Feasible through custom user attributes.) LDAP integration is supported.

No. (It runs in the Oracle Portal repository; it does not require SSO integration.)

SSO is enabled by using mod_oso.

2.2 General Suitability

This section describes each portlet-building technology in terms of its usage characteristics (for example, wizard-based or programmatic).

2.2.1 Web Clipping

Web Clipping is a simple wizard-based tool that helps you retrieve and present Web content, originating from other Web sites, in your portal. Web Clipping does not require you to have any technical background.

Examples of portlets you can build using Web Clipping

You can build the following portlets using Web Clipping:

- Stock chart portlet

- Personalized weather portlet

- Web mail portlet

2.2.2 OmniPortlet

OmniPortlet is an easy-to-use, wizard-based tool for presenting information from a wide variety of data sources in a variety of formats. OmniPortlet runs completely in the browser. Drop OmniPortlet on a portal page, click the Define link, and choose a data source and presentation format. Select from a wide variety of data sources including the following:

- Spreadsheet

- SQL

- XML

- Web Service

- Web page

OmniPortlet does not require you to use an additional development tool or have a strong technical background. Even so, you can use it to build reusable and high-performing portlets.

Examples of portlets you can create with OmniPortlet

You can create the following portlets using OmniPortlet:

- RSS news feed portlet

- Sales chart portlet

- SAP Business Suite portlet

2.2.3 Java Portlets

If the wizard-based portlet building tools do not satisfy your needs, you can build your portlets programmatically using Java. The Java Community Process standardized the Java portlet APIs in 2003. Portlets built against the Java Specification Request (JSR) 168 standard are interoperable across different portal platforms. The Java Portlet Wizard, an Oracle JDeveloper plug-in, helps you get started with your Java portlets.

Note:

When building portlets in Java, you have full control over your portlet's functionality. For example, you can control what it looks like and how it behaves.

Examples of portlets you can build using Java

You can build the following portlets in Java:

- Discussion forum portlet

- E-mail portlet

2.2.4 Portlet Builder

Portlet Builder is a wizard-based tool to create data-driven portlets, where the data resides in an Oracle database. You can build interactive forms to insert, update, and delete database records. You can create flexible reports and HTML bar charts to display information from the database. Portlet Builder also enables you to pass parameters and navigate between your data-driven portlets by using dynamic links.

Examples of portlets you can build using the Portlet Builder

You can build the following portlets using Portlet Builder:

- Data entry portlet

- Dynamic list of partners portlet

- Sales results portlet

2.2.5 PL/SQL Portlets

Similar to Java portlets, PL/SQL portlets provide a flexible approach to build Web applications that cannot be satisfied by built-in portlets. For example, your application may require implementation of special business rules or logic or meet custom-designed authorization requirements. PL/SQL portlets are commonly used when you need to perform data intensive operations by using SQL and PL/SQL. Oracle Portal offers a rich set of PL/SQL APIs, such as programmatic provider registration, object level privilege management, user interface control, or multilingual support.

For example, any information provider can create custom portlets to display an application to users through Oracle Portal. Developers simply build their portlets according to Oracle Portal Developer Kit (PDK) specifications and register the provider with Oracle Portal. Developers can use the Oracle PDK to develop portlets to suit their needs.

Examples of portlets you can build using PL/SQL

You can build the following portlets using PL/SQL:

- Content upload portlet

- Site map portlet

- Sophisticated data entry and report portlet

2.3 Expertise Required

While some of the portlet building tools do not require portlet development skills, others assume a strong technical background. This section describes each tool in terms of the level of knowledge required to use it effectively.

2.3.1 Web Clipping

Web Clipping is a tool that does not require any technical background at all. However, if you want to parameterize the Web page content that you clipped, you need to have an understanding of public portlet parameters and page parameters.

2.3.2 OmniPortlet

OmniPortlet requires you to have basic knowledge of the data source you want to leverage in your portlet. Table 2-2 lists the types of data sources that can be used with OmniPortlet and describes the type of information required to work with each type.

Table 2-2 OmniPortlet Data Sources

Data Source

Required Information

Spreadsheet

The URL that points to the spreadsheet containing the data that you want to display in the portlet.

SQL

The connection information to the data source and the SQL query that retrieves the data from the database.

XML

The location of the XML source and optionally the address of the XSL filter and the XML schema.

Web Service

The Web Services Description Language (WSDL) URL, the method of the Web service, and optionally the XSL filter URL and the XML schema URL.

Web page

The Web page data source uses the same environment as Web Clipping. No technical background is required.

J2EE Connector Architecture

Although not displayed on the OmniPortlet Wizard's Type page, a J2EE Connector Architecture (JCA) 1.0 adapter is also available. JCA provides a mechanism to store and retrieve enterprise data such as that held in ERP systems (Oracle Financials, SAP, PeopleSoft, and so on).

2.3.3 Java Portlets

To build Java portlets, you must know at least a subset of J2EE. Knowing HTML, Java servlets, and XML is a must, and JSP experience is recommended. Additional Java knowledge is optional, depending on the task you want to perform. Using Java portlets you can access any data source (supported by the Java language).

2.3.4 Portlet Builder

If you want to use Portlet Builder, you must have a good understanding of relational database concepts. Depending on what you want to achieve, SQL and PL/SQL knowledge may be required, as well. Using Portlet Builder, you can consume data from the local (Oracle Application Server infrastructure) database or remote databases using database links.

2.3.5 PL/SQL Portlets

To build PL/SQL portlets, you must know how to write SQL statements, code and debug PL/SQL program units using SQL*Plus or similar development tool that enables you to connect to the Oracle database. You should also know HTML and PL/SQL Web Toolkit to generate the portlet content. Experience of coding the PL/SQL Server Pages (PSP) is optional.

2.4 Deployment Type

Before a portlet can be consumed by an application, you must first deploy it, then register the provider you have deployed the portlet to. As shown in Figure 2-1, portlets can be deployed to Oracle Portal through three provider types:

- Web providers

- WSRP producers

- Database providers.

Web providers are deployed to a J2EE application server, which is often remote and communicates with Oracle Portal through Simple Object Access Protocol (SOAP) over HTTP. Web Services for Remote Portlets (WSRP), an OASIS standard, is supported in the Developer's Preview of Oracle Portal. Database providers are implemented in PL/SQL and deployed in the Oracle database where Oracle Portal is installed.

Figure 2-1 Portlet Provider Overview

2.4.1 Web Providers

Web providers are the most commonly used and flexible type of provider. They may reside on the same application server as Oracle Portal, on a remote application server, or anywhere on the network (Figure 2-2). A Web provider could be implemented using virtually any Web technology. However, the Oracle Portal Developer Kit provides a Java framework that simplifies the task of building Web providers.

Web providers use open standards, such as XML, SOAP, HTTP, or J2EE for deployment, definition, and communication with Oracle Portal. Also, because Web providers can be deployed to a J2EE container, they do not put an additional load on the Oracle Portal Repository database.

Figure 2-2 Web Providers

There are several benefits when developing portlets and exposing them as Web providers. You can perform the following tasks:

- Deploy portlets remotely.

- Leverage existing Web application code to create portlets.

- Specify providers declaratively.

- Take advantage of more functionality than that with database providers.

- Use standard Java technologies (for example, servlets and JSPs) to develop portlets of Web providers.

To expose your portlets using a Web provider, you must create a provider that manages your portlets and can communicate with Oracle Portal using SOAP. To learn how to expose your portlets using a Web provider, see Section 6.3, "Building JPS-Compliant Portlets with Oracle JDeveloper."

2.4.2 WSRP Producers

Web Services for Remote Portlets (WSRP) is a Web services standard that enables the plug-and-play of visual, user-facing Web services with portals or other intermediary Web applications. Being a standard, WSRP enables interoperability between a standards-enabled container based on a particular language (such as JSR 168, .NET, Perl) and any WSRP portal. So, a portlet (regardless of language) deployed to a WSRP-enabled container can be rendered on any portal that supports this standard. From an architecture perspective, WSRP producers are very similar to Web providers. For more information on the WSRP portal architecture, see "The Relationship Between WSRP and JPS".

To expose your portlets as a WSRP producer, you must create a producer that manages your portlets. To learn more about WSRP, see the WSRP and JSR 168 Standards page on the Oracle Technology Network. To learn how to expose your portlets as a WSRP producer, see Section 6.3.3, "Deploying Your JSR 168 Portlet to the Oracle WebLogic Server." You can also test your WSRP producers online using the Oracle Portal Verification Service:

http://portalstandards.oracle.com/portal/page/portal/OracleHostedWSRPPortal/Welcome

By default, the Portal session store maintains the user's profile information, which is obtained from Oracle Internet Directory, for the duration of a Portal session.

However, in some scenarios, WSRP producers require updates to the WSRP UserContext information sent to them. This information changes during the course of the session. In this scenario, to clear out the cached user information and obtain new information from Oracle Internet Directory when the target page is generated, the application or portlet producer redirects the browser to the following URL:

http(s)://server.domain.com:port/portal/pls/portal/portal.wwsec_app_user_info.flush_cache?p_requested_url=<url-encoded-target-page>

2.4.3 Database Providers

You can also create a database provider that owns one or more PL/SQL portlets. Database providers and their PL/SQL portlets reside in the Oracle Metadata Repository database and are implemented as PL/SQL packages. To access database providers on remote servers, you can use the Federated Portal Adapter (Figure 2-3). For more information about the Federated Portal Adapter, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Figure 2-3 Database Providers

Database providers are ideal when you need to perform data-intensive operations using PL/SQL. An example of this is when you are building forms or charts with the Oracle Portal user interface or the PL/SQL APIs provided in the PDK.

To learn how to expose your PL/SQL portlets using a database provider, refer to Section 8.13, "Registering Providers Programmatically".

2.4.4 Provider Architecture

Figure 2-4 illustrates the basic architecture of portlet providers.

Figure 2-4 Provider Architecture

When users display the portal page in their Web browsers, the flow of the request works as follows:

1. The user requests a portal page from the Web browser by entering a URL in the browser's address field.

2. The Parallel Page Engine (PPE), which resides in the Oracle Application Server's middle tier, retrieves the portal page layout, portlet, and provider information (also called the page metadata) from the Oracle Portal Repository.

Note:

The PPE is responsible for constructing the requested portal page based on the page metadata.

3. The PPE contacts all the providers for the portlet content.

4. The providers make the necessary calls to their portlets so that the portlets generate the portlet content in the form of HTML or XML code.

5. The providers return the portlet content back to the PPE.

6. The PPE assembles the portal page, and the Oracle Application Server returns the page to the Web browser.

For more information about the portlet and provider architecture, visit the Portlet Development page on Portal Center:

http://portalcenter.oracle.com

Web Clipping, OmniPortlet, and Java portlets communicate with Oracle Portal through Web providers. After you install Oracle Portal, Web Clipping and OmniPortlet are ready to use; their providers are registered with Oracle Portal out of the box. You have to register the provider of your Java portlets explicitly.

Note:

Web Clipping and OmniPortlet are developing very rapidly. The most recent versions of these portlets are available for download on OTN. If you decide to go with the downloaded version of these tools, you must deploy them to Oracle WebLogic Server and register them with Oracle Portal as Web providers. For more information, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Data-driven portlets, built with Portlet Builder, communicate with Oracle Portal through database providers. You do not need to register the Portlet Builder providers with Oracle Portal explicitly; they are automatically registered for you.

PL/SQL portlets communicate with Oracle Portal through a database provider. You have to register the database provider explicitly.

2.4.5 Provider Registration

Oracle Portal includes a provider registration wizard, accessible from the Providers tab in the Navigator. The registration screen contains the following sections:

- Provider Information: Contains the provider name, time out details, and the implementation style.

- User/Session Information: Contains information on how session information is communicated to the providers.

- Database Providers: Contains information specific to database providers, such as the implementation owner and name.

- Web Providers: Contains information specific to Web providers, such as the URL of the provider, the user's identity communicated to the provider, and proxy information.

- WSRP Producers: Contains information specific to WSRP producers, such as the WSDL URL and the session handling information supplied by the producer.

The sections that impact session handling are the User/Session Information section and the cookie domain check box on the Web provider registration page of the wizard. For more information on using the same cookie domain, refer to the "Sharing Session Cookies Not Allowed in PDK-Java Release 2" article, which can be accessed from the Portlet Development page on Portal Center (http://www.oracle.com/technology/products/ias/portal/portlet_development_10gr2.html).

User/Session Information

In the User/Session Information section, you can choose one of two options, depending on the session-related information you want the providers to receive from Oracle Portal. The options are as follows:

- Public: Choosing this option sets the name of the user to Public. The providers will not receive any session-related information like the session ID or the time the user logged in. This option is the equivalent of the LOGIN_FREQUENCY_PUBLIC in the provider registration API (see Section 8.13, "Registering Providers Programmatically").

- User: Choosing this option sends the name of the Oracle Portal user to the providers. This section contains the following two options:

- Login Frequency: Here, you can select one of three options (always, once for each user session, and never) to determine how often the session information must be sent to the provider, and thus how often the user needs to log in.

- Require Portal user-specific session information: Here, you can specify whether the session information will be sent in the provider calls.

2.5 Caching Style

Caching plays an essential role in ensuring that your portal is highly performant. Oracle Portal supports caching on various levels, such as caching pages, portlets, styles, and page metadata. Caching portlets is key to delivering accurate information in a timely manner to your users. All portlet building technologies, available with Oracle Portal, support caching.

As Oracle Portal supports user personalization of pages and portlets, the view of a page can vary from user to user. Oracle Portal's caching is designed to allow content to vary for each user. Therefore, portal objects, including portlets, can be cached at two levels, user level and system level, and can be described as follows:

- User-level caching is for a specific user; the cache entries stored are unique for that user and cannot be accessed by other users. Good candidates for user-level caching are portlets supporting personalization, such as e-mail or stock ticker portlets.

- System-level caching enables users to share a single cache entry and, therefore, there is no need to cache a copy of the object for every user. Examples of content that might be suitable for system-level caching are news portlets that are not personalizable, or custom-built navigation portlets.

When not using caching, you may find accessing various data sources with Web Clipping, OmniPortlet, and Portlet Builder to be time consuming. When you enable caching, you instruct Oracle Portal or Oracle Web Cache to maintain a copy of the portlet content. If the portlet is requested and the content was cached previously, the portlet does not have to spend time contacting the data source and regenerating its content again. Simply, the previously cached portlet content is returned. Different types of caching are as follows:

- Expiry-based caching: Consider using expiry-based caching when the portlet content is static or when it is not critical that the most up-to-date content be displayed. When using expiry-based caching, you must specify the caching period.

- Validation-based caching: Consider using validation-based caching for portlets with dynamic content that changes frequently or unpredictably. The portlet associates its content with a caching key and returns the key value along with the content. When the portlet content is requested, the portlet decides, based on the caching key, if the current content is valid. If the portlet content is valid, then it returns a response indicating that the cached content can be used (that is, the content is valid) or generates the new portlet content and returns it along with a new caching key for that content.

- Invalidation-based caching: Invalidation-based caching is the most complex, but also the most flexible, form of caching. Consider using invalidation-based caching when you require the efficiency of expiry-based caching with the ability to invalidate the cache content any time. Objects in Oracle Web Cache are considered valid until they are invalidated explicitly.

2.5.1 Web Clipping, OmniPortlet, and Portlet Builder

For portlets built with Web Clipping, OmniPortlet, and Portlet Builder you can specify a period of time for which they are cached (expiry-based caching). In addition to this, portlets built with Web Clipping and OmniPortlet are refreshed automatically when the end user personalizes them.

2.5.2 Java Portlets

Java portlets support three types of caching: expiry-, validation-, and invalidation-based caching. With Java portlets, you can combine invalidation-based caching with either expiry-based or validation-based caching.

In addition to caching all your portlet's content, you can also cache fragments of your portlets by using Edge Side Includes (ESI).

2.5.3 PL/SQL Portlets

Similar to Java portlets, PL/SQL portlets also support three types of caching: expiry-, validation-, and invalidation-based caching.

2.6 Development Tool

This section describes development tools you can use to build different types of portlets.

2.6.1 Web Clipping, OmniPortlet, and Portlet Builder

OmniPortlet, Web Clipping, and Portlet Builder use a browser-based wizard as the development tool.

2.6.2 Java Portlets

Although you can use any Java development environment to build Java portlets, it is highly recommended that you use Oracle JDeveloper, a professional, integrated development environment (IDE). While you can consider other IDEs, the PDK contains an Oracle JDeveloper plug-in that includes the Java Portlet Wizard, to minimize your Java portlet development efforts.

The Java Portlet Wizard generates a starting skeleton and file structure for both JSR 168 and PDK-Java portlets. You need to add only your own business logic to the skeleton. Oracle JDeveloper can also package and deploy your applications to your J2EE container, such as Oracle WebLogic Server. Also, Oracle JDeveloper helps you test your portlet provider. Oracle recommends that you use the preconfigured Oracle WebLogic Server that is shipped withOracle JDeveloper as your development Java portlet runtime environment, if the version matches that of the platform on which you plan to deploy.

2.6.3 PL/SQL Portlets

When developing a PL/SQL portlet, you create PL/SQL program units that access Oracle Portal by calling Oracle Portal PL/SQL APIs. To enable this access, you create a schema, the provider schema, to store the provider and portlet PL/SQL packages in the same database in which Oracle Portal is installed. The provider schema must be granted execute privileges on the Oracle Portal PL/SQL APIs.

To facilitate the development of database providers and PL/SQL portlets, you can use the PL/SQL Generator, a hosted utility that creates installable PL/SQL code for a database provider and its PL/SQL portlets. The PL/SQL Generator is a Web application that receives the provider and portlet definitions in the form of an XML file. The syntax of the XML tags that are used for the provider and portlet definition is a subset of the XML tags that are used for defining Web providers with the PDK-Java. The output of the PL/SQL Generator is a SQL script that can be run from SQL*Plus. The script contains SQL commands for installing the provider and portlet packages.

The hosted PL/SQL Generator is available on the Oracle Portal Developer Kit page of OTN:

http://www.oracle.com/technology/products/ias/portal/pdk.html

2.7 Portlet Creation Style

Oracle Portal supports the following two types of portlet creation as shown in Figure 2-5:

- Develop in-place

- Develop first, add later

The figure also indicates that the develop first, add later portlet creation is usually the task of the portlet developer, while the develop in-place portlet creation is the page designer's responsibility.

Figure 2-5 Portlet Creation Style

2.7.1 OmniPortlet and Web Clipping

OmniPortlet and Web Clipping both offer a develop in-place portlet creation style. First you add the portlets to a portal page and then you define them in place on the page.

2.7.2 Java Portlets

Typically Java portlets offer a develop first, add later portlet creation style. Two wizards are available through Oracle JDeveloper to assist with the creation of Oracle PDK-Java and JSR 168 portlets. The wizards generate the basic files required for portlet creation. The developer hand-codes the portlet logic. The development sequence for Java portlets is to create the portlet, deploy it to a provider, register the provider with Oracle Portal, and then add the portlet to a page.

Note:

With extensive coding, you can create develop in-place Java portlets. For example, Web Clipping and OmniPortlet are both Java portlets.

2.7.3 Portlet Builder

With Portlet Builder you define the portlets first. The previously defined portlets are then made available to you in the Portlet Repository so you can add them to your pages. For simple portlets, though, Portlet Builder offers you the develop in-place experience, similar to OmniPortlet and Web Clipping.

Note:

Portlets built with Portlet Builder's develop in-place technology are somewhat limited as compared to those built using the Navigator.

2.7.4 PL/SQL Portlets

Similar to the Java portlets, PL/SQL portlets typically follow the develop first, add later creation path. Extensive coding is required to develop in-place PL/SQL portlets. For example, simple in-place portlets that are offered by Portlet Builder are written in PL/SQL.

2.8 User Interface Flexibility

This section describes the portlet building tools in terms of the control you have over the user interface.

2.8.1 Web Clipping

Because of its nature, Web Clipping always displays the remote Web site content, therefore UI flexibility is not a requirement for this portlet.

2.8.2 OmniPortlet

OmniPortlet enables you to use a number of different prebuilt layouts, such as scrolling news, tabular, and chart. You can also use the built-in HTML layout to personalize the look and feel of your portlet using HTML and JavaScript.

2.8.3 Java Portlets and PL/SQL Portlets

In Java portlets and PL/SQL portlets, you have full control over your portlet's user interface. Your portlet is free to generate any HTML content that conforms the rendering rules for Oracle Portal pages.

2.8.4 Portlet Builder

While you can be very productive in building portlets with Portlet Builder, it is somewhat limiting with respect to the user interface.

2.9 Ability to Capture Content from Web Sites

This section describes the portlet building tools in terms of their ability to include content from other sources.

2.9.1 Web Clipping

For portlets that display content from a remote Web site as it is presented at the source location, the best tool to use is Web Clipping. Web Clipping can tolerate the changes of the source HTML page to some extent. If a clipped table moves from one place to another in the source page, the Web Clipping engine can find the table again using the internal "fuzzy match" algorithm. Portlets built with Web Clipping can also maintain sessions to the remote Web sites. Web Clipping also supports end user personalization of HTML form values.

2.9.2 OmniPortlet

For portlets using the data but not the layout from a remote Web site, the best choice is OmniPortlet. Use OmniPortlet to retrieve the data, process the data (format, filter, and so on), and present it in a portlet in a tabular, chart, or news format. OmniPortlet is a powerful tool that extracts data from Web pages by using its Web page data source.

2.9.3 Java Portlets

Java portlets can take advantage of the low-level Java networking APIs to retrieve and process content from remote Web sites. To avoid unnecessary development efforts, before choosing Java always make sure that Web Clipping or OmniPortlet are not viable options.

2.9.4 PL/SQL Portlets

PL/SQL portlets can communicate with Web servers to access data on the Internet by using procedures and functions from the UTL_HTTP package. The package makes HTTP callouts from SQL and PL/SQL. The package also supports HTTP over the Secured Socket Layer protocol (SSL), also known as HTTPS, directly or through an HTTP proxy. Other Internet-related data-access protocols (such as the File Transfer Protocol (FTP) or the Gopher protocol) are also supported using an HTTP proxy server that supports those protocols.

2.10 Ability to Render Content Inline

Active elements in your portlets, such as links or form buttons, enable your users to navigate to remote URLs. In a News portlet, for example, you can click a hyperlink to navigate to a news site with detailed information about news of interest. For example, a user clicks a news summary link in a News portlet, leaves the page, and lands on the news site.

You may have a requirement to keep your users within the context of the portal page by rendering the requested content within the same portlet container. For example, a user clicks a news summary link in a News portlet, and the portlet refreshes with the detailed news article.

2.10.1 Web Clipping

The Web Clipping portlet supports URL rewriting for achieving inline content rendering. It can process the links originating from the source Web site and rewrite them to achieve the desired functionality.

You can choose from the following three options:

- Select not to rewrite the URLS within the portlet, in which case clicking the links takes users out of the portal to the Web site that provides the clipping. Whenever the link brings the user to a place that requires authentication, the user must enter login information before the link target is displayed.

- If the Web Clipping provider is registered with an External Application and the clipping requires authentication, you can instruct Web Clipping to rewrite all URLs within the portlet to point to the Login Server. In this case, navigation will cause the user to leave Oracle Portal, while also using the Login Server to log the browser into the External Application.

- Select to rewrite all URLS within the portlet (inline rendering) to point back to the portal page so that all browsing within the Web Clipping portlet remains within Oracle Portal. If the Web Clipping provider is registered with an External Application, this will cause the Web Clipping provider to log itself into the External Application. In this case, the navigation within the portal through the Web Clipping provider is authenticated in the External Application.

2.10.2 OmniPortlet

OmniPortlet does not offer URL rewriting directly, but you can achieve inline rendering functionality by using public portlet parameters and events. Then you have to map the events to the same portal page where your OmniPortlet resides.

2.10.3 Java Portlets

Since you have full control over the links and buttons in Java portlets, you can easily implement inline rendering functionality. To achieve inline rendering, you must append the private portlet parameters to the page URL.

If you use Struts in your portlet, the PDK-Struts integration framework renders your content always in the same portlet container.

If your portlet consists of multiple JSPs (for example, several steps in a survey or wizard), your portlet can make use of a special parameter to specify at run time the JSP to use to render the content.

2.10.4 Portlet Builder

Portlets built with Portlet Builder do not have inherent inline rendering support. You can, however, construct your links in SQL-based reports and charts so that they point to specific portal pages. If required, you can also pass parameters to portal pages, which in turn can be mapped to portlet parameters.

2.10.5 PL/SQL Portlets

Similar to Java portlets, you have full control over the active elements in PL/SQL portlets and, therefore, you can achieve the inline rendering functionality programmatically by implementing private portlet parameters.

2.11 Charting Capability

This section describes the portlet building tools in terms of their charting functionality.

2.11.1 Web Clipping

Web Clipping clips pre-existing content. So, while it does not create charts, it can retrieve and present HTML content that contains charts.

2.11.2 OmniPortlet

OmniPortlet supports bar, line, and pie charts. Charts in OmniPortlet are dynamically generated images, which can include hyperlinks.

2.11.3 Java Portlets

You can create sophisticated chart portlets programmatically in your Java portlets using Oracle's Business Intelligence (BI) Beans.

Note:

Oracle Reports and Oracle BI Discoverer portlets use BI Beans to create professional graphs.

2.11.4 Portlet Builder

With Portlet Builder, you can build HTML-based bar chart portlets. Among other features, you can specify the color and orientation of the bars.

2.11.5 PL/SQL Portlets

In PL/SQL portlets, HTML-based charting can be achieved by extensive coding.

2.12 Public Portlet Parameters Support

There are three types of parameters in Oracle Portal: page parameters, public portlet parameters, and private portlet parameters. These parameters can be described as follows:

- Page parameters: You can use a page parameter to pass a value to a page. Using page parameters, the information that is displayed on a page can vary depending on where the page is called from and who is viewing the page. Using page parameters, page designers can synchronize the portlets on a page by passing them the same values. This provides the ability to reuse and tailor portlets on pages by merely integrating them with page parameters. Without this functionality, you would have to code portlets individually to use different parameter values.

- Public portlet parameters: You can use a public portlet parameter to pass a value to a portlet. Using portlet parameters, the information that is displayed in a portlet can be specific to a particular page or a user. Portlet parameters are created by the portlet developer and are exposed to the page designer, through the user interface. After adding a portlet to a page, page designers can assign values to the public portlet parameters to make the information displayed in the portlet specific to the page.
Page designers can assign values to public portlet parameters by providing a specific value (constant), a system variable (for example, the portal user name), or a page parameter. At run time, the portlet receives the values from the sources specified. In this way, page designers have complete control over the source of the parameter, whereas you have complete control over how the data is used after it is transmitted to the portlet.

- Private portlet parameters: You can use private portlet parameters to implement internal navigation in your portlet. You can pass parameters to your portlets every time the page is requested. Private portlet parameters can be passed exclusively from the portlet instance to the same portlet instance.
Private portlet parameters do not require a full page refresh. You can create a link in a portlet that can be used to refresh the portlet only, without triggering a full portal page refresh. By doing this, only the content of the affected portlet is updated and the rest of the page is not. Refer to "Partial Page Refresh" in Chapter 7, "Enhancing Java Portlets" for details about setting this programmatically.

Portlets supporting public portlet parameters enable page designers to tailor the portlets' data input for each portlet instance. In this case, the portlet developer can focus on the portlet logic, while page designers can easily reuse portlets and address the interaction between the page and the portlets.

All five portlet building technologies discussed in this chapter (OmniPortlet, Web Clipping, Java portlets, Portlet Builder, and PL/SQL portlets) support public portlet parameters. OmniPortlet, Web Clipping, and Portlet Builder provide complete support through their wizard interface. You can add public portlet parameter support to your Java portlets programmatically or with the Java Portlet Wizard. PL/SQL portlets support public parameters only programmatically.

Note:

The JSR 168 standard does not cover the notion of public portlet parameters. If you want to utilize public portlet parameters in your Java portlets, you have to use PDK-Java.

2.13 Private Portlet Parameter Support

This section describes the portlet building tools in terms of their support for private parameters.

2.13.1 OmniPortlet, Web Clipping, and Portlet Builder

OmniPortlet, Web Clipping, and Portlet Builder do not provide access to the portlet developer to private portlet parameters.

2.13.2 Java Portlets and PL/SQL Portlets

In your Java portlets and PL/SQL portlets, you can implement internal navigation by using private portlet parameters.

Note:

PL/SQL portlets do not support private and public parameters simultaneously. You need to decide which parameter type to support before coding your PL/SQL portlet.

2.14 Event Support

An event is a user action that you define to display a Portal page. User actions include clicking a link or a button in a portlet. Page designers specify what to do when an event occurs in a portlet on a page. When an event occurs, page designers can either redisplay the current page or navigate the user to another portal page, optionally passing values to that page's parameters.

2.14.1 Web Clipping, OmniPortlet, and Java Portlets

Web Clipping, OmniPortlet, and Java portlets support events.

2.14.2 Portlet Builder and PL/SQL Portlets

Portlet Builder and PL/SQL portlets do not support events.

2.15 Ability to Hide and Show Portlets Based on User Privileges

This section describes the portlet building tools in terms of their support for authorization functionality.

2.15.1 Web Clipping and OmniPortlet

You can hide and show portlets built with Web Clipping and OmniPortlet on portal pages dynamically by using security managers. Although Web Clipping and OmniPortlet do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.

2.15.2 Java Portlets

The PDK provides a number of security managers for Java portlets. Following are two examples:

- Group security manager: The group security manager makes the portlet appear to users who are members of a specified group, while hiding it from those who are not members.

- Authentication level security manager: You can use the authentication level security manager to control access to the portlets based on the user's authentication level. For example you may hide the portlet from public users but display it to authenticated users.

JSR 168 portlets support the standard servlet mechanisms.

2.15.3 Portlet Builder

Portlet Builder provides a declarative user interface to control access to portlets.

2.15.4 PL/SQL Portlets

The PDK provides security APIs to implement hiding and showing content in PL/SQL portlets.

2.16 Multilingual Support

This section describes the portlet building tools in terms of their support for other languages.

2.16.1 Web Clipping, OmniPortlet, Java Portlets, and PL/SQL Portlets

Web Clipping, OmniPortlet, Java portlets, and PL/SQL portlets display textual information in the language selected by the portal user.

2.16.2 Portlet Builder

Portlets built with Portlet Builder support English only.

2.17 Pagination Support

Support for pagination is useful when a portlet must display a relatively large set of records.

2.17.1 Web Clipping

Pagination support is not applicable to Web Clipping.

2.17.2 OmniPortlet

OmniPortlet does not support pagination.

2.17.3 Java Portlets and PL/SQL Portlets

You can implement pagination in your Java portlets and PL/SQL portlets programmatically.

2.17.4 Portlet Builder

Portlet Builder has built-in support for pagination.

2.18 Single Sign-On and External Application Integration

This section describes the portlet building tools in terms of authentication for external application.

2.18.1 Web Clipping

Web Clipping's integration with the external application framework provides a fully automated mechanism to store passwords to external Web sites. All you have to do is to associate an External Application ID to the Web Clipping provider when registering the provider.

2.18.2 OmniPortlet

OmniPortlet enables you to store connection information when the data source is password protected. The credentials to access the data source can either be shared across all users, or saved individually for each user. OmniPortlet is capable of storing database credentials, as well as HTTP basic authentication user name-password pairs. The credentials are stored in the secured data repository of OmniPortlet, in an Oracle database.

2.18.3 Java Portlets

Java portlets support programmatic integration with the external application framework as well as any LDAP server, such as Oracle Internet Directory.

2.18.4 PL/SQL Portlets

You can build PL/SQL portlets that enable single sign-on by using mod_osso, an authentication module on the Oracle HTTP Server. mod_osso is a simple alternative to the single sign-on SDK, used in earlier releases to integrate partner applications. mod_osso simplifies the authentication process by serving as the sole partner application to the Single Sign-On server.

PL/SQL portlets can integrate with the external application framework programmatically.

Part II

Creating Portlets

Part II contains the following chapters:

- Chapter 3, "Creating Portlets with OmniPortlet"

- Chapter 4, "Building Example Portlets with OmniPortlet"

- Chapter 5, "Creating Content-Based Portlets with Web Clipping"

- Chapter 6, "Creating Java Portlets"

- Chapter 7, "Enhancing Java Portlets"

- Chapter 8, "Creating PL/SQL Portlets"

3 Creating Portlets with OmniPortlet

This chapter provides an overview of OmniPortlet and explains the user interface elements associated with OmniPortlet. This chapter contains the following sections:

- Section 3.1, "Introduction to OmniPortlet"

- Section 3.2, "The OmniPortlet Wizard"

- Section 3.3, "Parameters and Events"

For information about using OmniPortlet to build example portlets, see Chapter 4, "Building Example Portlets with OmniPortlet." For troubleshooting information regarding OmniPortlet, see Section B.3, "Diagnosing OmniPortlet Problems." For information about registering and configuring OmniPortlet with Oracle Portal, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

3.1 Introduction to OmniPortlet

OmniPortlet is a subcomponent of Oracle Portal that enables page designers and developers to easily publish data from various data sources using a variety of layouts without writing any code. You can base an OmniPortlet on almost any kind of data source, such as a spreadsheet (character-separated values), XML, and even application data from an existing Web page.

Note:

You can find more information about developing different types of portlets in Chapter 1, "Understanding Portlets," and information about providers and other portlet technologies in Chapter 2, "Portlet Technologies Matrix."

OmniPortlet enables page designers and content contributors to do the following:

- Display data from multiple sources (CSV, XML, SQL, and so on)

- Sort the data to display

- Format data using a variety of layouts (bulleted list, chart, HTML, and so on)

- Use portlet parameters

- Raise portlet events

- Expose personalizable settings to page viewers

To display personalized data, you can refine the retrieved data by filtering the results returned from a data source, and parameterize the credential information used to access secure data. Out of the box, OmniPortlet provides the most common layout for portlets: tabular, chart, HTML, news, bulleted list, and form.

Note:

To use OmniPortlet, the Simple Parameter Form, or the Web Clipping portlet with Windows 2000, you must use Netscape 7.0 or later, or Microsoft Internet Explorer 5.5 or later.

You can add an OmniPortlet to a portal page just as you would add any other portlet. OmniPortlet can be found under Portlet Builders in the Portlet Repository. If you have downloaded OmniPortlet as part of the Oracle Portal Developer Kit, for example, to upgrade to a later release, you must register it before you can use it.

You can find more information about building portal pages and adding portlets in Oracle Fusion Middleware User's Guide for Oracle Portal.

Instructions for installing, configuring, and registering the OmniPortlet provider are provided within the pdksoftware.zip file containing the PDK-Java and Portal Tools. For specific information on configuring OmniPortlet, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

3.2 The OmniPortlet Wizard

The OmniPortlet Wizard initially contains five steps. When you first define your OmniPortlet, you set the data source type, data source options, filter options, view options, and layout. When you've completed these steps of the wizard, you can re-enter the wizard by clicking Edit Defaults for the portlet. When you re-enter the wizard, you can change the definitions on the Source, Filter, View, and Layout tabs, as well as set up the event parameters on the Events tab.

Note:

On the IBM Linux on Power platform, if the action buttons (Next, Previous, Finish, and Cancel) are minimized to dots when defining the OmniPortlet, increase the stack size shell limit to unlimited and restart the WLS_PORTAL instance. Run the following command to set the stack size shell limit to unlimited:

prompt> ulimit -s unlimited

This section provides a high-level overview of the six tabs, which are described in Table 3-1. You can also find information in the online Help (accessible by clicking the Help link in the product), which describes the options on each tab.

Table 3-1 OmniPortlet Wizard and Edit Defaults

Step/Tab

Description

Type

Provides your data source options. Displays only in the initial definition of the portlet, and is not available when editing the defaults of the portlet.

Source

Provides the options for the selected data source, such as the URL of the Web Service you want to use. You can change these options later when editing the defaults of the portlet.

Filter

Provides sorting options at the Oracle Portal level to enable you to refine your results. You can change these options later when editing the defaults of the portlet.

View

Provides options for displaying portlet header and footer text, the layout style, and caching. You can change these options later when editing the defaults of the portlet.

Layout

Provides detailed options for customizing the layout. You can change these options later when editing the defaults of the portlet.

Events

Does not display in the initial definition of the portlet. Provides options for adding events to the portlet. Displays only after the portlet has been defined in the Edit Defaults mode of the wizard.

3.2.1 Type

When you first start OmniPortlet, the Type step displays, which enables you to choose your data source (Figure 3-1). Out of the box, OmniPortlet supports the data sources shown in Table 3-2.

Figure 3-1 Type Tab of the OmniPortlet Wizard

Note:

If you've downloaded and installed an additional data source, the data source will display on the Type tab.

Table 3-2 Supported Data Source Types

Data Source Type

Description

Spreadsheet

Displays data from a text file containing character-separated values (CSV).

SQL

Displays data from a database using SQL.

XML

Displays data from an XML file.

Web Service

Displays data from a discrete business service that can be accessed over the Internet using standard protocols.

Web Page

Displays data based on existing Web content.

J2EE Connector Architecture*

(Displays only if the Sample Provider is registered with Oracle Portal). A J2EE Connector Architecture (JCA) 1.0 adapter is also available. JCA provides a mechanism to store and retrieve enterprise data such as that held in ERP systems (Oracle Financials, SAP, PeopleSoft, and so on).

After you complete the OmniPortlet Wizard and edit the defaults of the portlet, you cannot change the data source type.

3.2.2 Source

After you've chosen your data source type, the Source step of the OmniPortlet Wizard displays. This step adapts to the data source you've chosen, enabling you to specify the options offered by that data source. The Source tab contains a Proxy Authentication section if the OmniPortlet provider has been configured to use a proxy server requiring authentication, and a Connection section where you can provide the necessary information for connecting to the data source.

This section contains information about the following two common areas on the Source tab:

- Section 3.2.2.1, "Proxy Authentication"

- Section 3.2.2.2, "Connection Information"

Later, this section also describes the portion of the Source tab specific to each data source. The data sources available are as follows:

- Section 3.2.2.3, "Spreadsheet"

- Section 3.2.2.4, "SQL"

- Section 3.2.2.5, "XML"

- Section 3.2.2.6, "Web Service"

- Section 3.2.2.7, "Web Page"

Note:

For more information on the Source tab options, click Help in the upper right corner of the page.

3.2.2.1 Proxy Authentication

OmniPortlet supports proxy authentication, including support for global proxy authentication and authentication for each user. You can specify whether all users will automatically log in using a user name and password you provide, each user will log in using an individual user name and password, or all users will log in using a specified user name and password. If the OmniPortlet provider has been set up to use proxy authentication that requires your login, a Proxy Authentication section displays on the Source tab where you can enter this information.

The Proxy Authentication section only displays for the data sources that may require you to use a proxy server to access them: CSV (character-separated values), XML, Web Service, and Web Page. For more information on configuring the OmniPortlet provider to use proxy authentication, see the online Help topic that displays when you click Help on the Edit Providers: OmniPortlet Provider page. If the OmniPortlet provider is configured to "Require login for all users," each user must set his or her own login information: - For page designers, set this in Edit Defaults: Source tab. - For page viewers, set this on the Personalize screen.

You can also find more information on configuring OmniPortlet in Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Note:

If you are using the Web Page data source, the Proxy Authentication section displays in the Web Clipping Studio, after you have clicked the Select Web Page button on the Source tab.

3.2.2.2 Connection Information

For each data source except the Web Page data source, the Source step contains a Connection section, where you can define the connection information to access secured data. The Source step for all data sources includes a Portlet Parameters section, where you can define the parameters for the portlet (Figure 3-2). You can then map the portlet parameters to the page-level parameters.

Note:

If you use parameters in place of Username, Password, or Connection String, the Test button will return an error, however the connection information is correct when the parameter values are substituted.

Figure 3-2 Source Tab: Connection and Portlet Parameters Section

To edit the connection information, click the Edit Connection button and fill out the information on the page shown in Figure 3-3. On this page, you can enter a name for the connection information, as well as the user name and password. For the SQL data source, you can enter more information to specify the driver you wish to use to connect to the data source. For more information, see Section 3.2.2.4, "SQL."

Figure 3-3 Edit Connection Page

Note:

For more information about the Connection section and the Edit Connection button, click Help on the Source tab of the OmniPortlet wizard.

3.2.2.3 Spreadsheet

Spreadsheets are a common method of storing small data sets. OmniPortlet enables you to share spreadsheets by supporting character-separated values (CSV) as a data source. On the Source tab, you specify the location of the CSV file (Figure 3-4). If the file is located on a secure server, you can specify the connection information in the Connection section described in Figure 3-2. You can also select the character set to use when Oracle Portal reads the file, as well as the delimiter and text qualifier.

Since the OmniPortlet provider exists and executes in a tier different from the Oracle Portal application and does not have access to the Oracle Portal session information, you must expose CSV files that are uploaded to Oracle Portal as PUBLIC in order for OmniPortlet to access them.

Note:

For more information on using the CSV data source, see Section 4.3, "Building an OmniPortlet Based on a Spreadsheet (CSV)."

Figure 3-4 Source Tab: Spreadsheet

3.2.2.4 SQL

The relational database is the most common place to store data. OmniPortlet enables you to use standard JDBC drivers and provides out-of-the-box access to Oracle and any JDBC database. You can specify the driver type when you configure the connection information. Figure 3-5 shows the Source tab for a SQL data source.

Figure 3-5 Source Tab: SQL

3.2.2.4.1 SQL Connection Information

You can use the DataDirect JDBC drivers to access other relational databases. To configure OmniPortlet to use these drivers, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

After the driver is installed, you'll notice it listed in the Driver Name list on the Connection dialog box on the Source tab, as shown in Figure 3-6.

Figure 3-6 Connection Information on the SQL Source Tab

Note:

For more information on DataDirect drivers, see the Certification Matrix for Oracle Fusion Middleware and DataDirect JDBC (http://www.oracle.com/technology/products/index.html).

When you want to use one of the DataDirect drivers, you must use a unique connection string format: hostname:port, where hostname is the name of the server where the database is running, and port is the listening port of the database. You can see an example in Figure 3-7.

Figure 3-7 Edit Connection Page with DataDirect Driver

3.2.2.4.2 Using Stored Procedures

You can also make a call to Stored Procedures instead of SQL statements to add business logic to your data. You can create your package and stored procedure in your database and refer the stored procedure in OmniPortlet.

For example, you could do the following using the SCOTT sample schema:

1. Create a package and declare a ref cursor:

create or replace package emp_pack istype empcurr is ref cursor;end;

2. Define a stored procedure, for example the following procedure accepts JOB as a parameter and returns a ref cursor, where JOB Column in the scott.Emp table, its value can be CLERK, MANAGER, and so on.

create or replace procedure emp_proc(eset OUT emp_pack.empcurr,
jname IN VARCHAR2)
is
sql_statement varchar2(200);
begin
sql_statement := 'select empno,ename,hiredate
from emp
where job = '''||jname||'''
order by EMPNO,hiredate';
open eset for sql_statement;
end;

3. Add the PL/SQL statements from steps 1 and 2 to a SQL file (for example, proc.sql) and save it to a directory.

4. Connect to the database using the following command:

sqlplus userid/password@Connection_String

Replace userid, password, and Connection_String with the connection information to your database. You can find the connection string in the tnsnames.ora file within your ORACLE_INSTANCE\config directory.

5. Run the procedure:

@proc

6. Finally, create an OmniPortlet based on the SQL data source, enter the appropriate database connection information. In the SQL Statement box, enter the following code:

call emp_proc('CLERK')

3.2.2.5 XML

You can access XML data sources across the intranet or Internet. On the Source tab, you can specify the URL of the XML file that contains your data as shown in Figure 3-8.

Note:

For more information on using the XML data source, see Section 4.4, "Building an OmniPortlet Based on an XML Data Source."

Figure 3-8 Source Tab: XML

Next to the XML URL and the XSL Filter URL fields are Test buttons which you can use to validate your XML data source and the XSL filter.

The specified XML file can either be in tabular (ROWSET/ROW) structure, or you can provide an XML Style Sheet (XSL) to transform the data into the ROWSET/ROW structure. The following example shows the ROWSET/ROW structure of an XML data source.

<TEAM>
<EMPLOYEE>
<DEPTNO>10</DEPTNO>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
<SAL>5000</SAL>
</EMPLOYEE>
<DEPTNO>20</DEPTNO>
<ENAME>SCOTT</ENAME>
<JOB>ANALYST</JOB>
<SAL>3000</SAL>
<EMPLOYEE>
</TEAM>

In this example, the <TEAM> tags delineate the rowset, and the <EMPLOYEE> tags delineate the rows.

Regardless of the format of the XML file, OmniPortlet automatically inspects the XML to determine the column names, which will then be used to define the layout. If you want to specify this information yourself, you can supply a URL to an XML schema that describes the data.

Similar to the other data sources, you can also specify the connection information for this data source, if the XML file is located on a secured server protected by HTTP Basic Authentication.

Note:

Since the OmniPortlet provider exists and executes in a different tier from Oracle Portal and does not have access to the Oracle Portal session information, you must expose XML files that are uploaded to Oracle Portal as PUBLIC in order for OmniPortlet to access them.

3.2.2.6 Web Service

A Web Service is a discrete business service that can be programmatically accessed over the Internet using standard protocols, such as SOAP and HTTP. Web Services are not specific to a platform or language, and are typically registered with a Web Service broker. When you find a Web Service you want to use, you must obtain the URL to the Web Service Description Language (WSDL) file that describes the Web Service and specifies the methods that can be called, the expected parameters, and a description of the returned data.

OmniPortlet supports both types of Web Services: Document and RPC (Remote Procedure Calls). After a WSDL document/file is supplied, it is parsed, and the available methods that can be called display on the Source tab.

Similar to the XML data source, OmniPortlet expects the Web Service data in ROWSET/ROW format, though you can also use an XSL file to transform the data. OmniPortlet inspects the WSDL document/file to determine the column names, though you may also specify an XML schema to describe the returned data set.

Figure 3-9 shows the Source tab for a Web service.

Note:

For more information on using the Web Service data source, see Section 4.2, "Building an OmniPortlet Based on a Web Service."

Figure 3-9 Source Tab: Web Service

3.2.2.7 Web Page

OmniPortlet enables you to use existing Web content as a source of data to publish information to your portal. It provides and renders clipped Web content as a data source.

The Web Page data source extends the scope offered by the Web Clipping Portlet to include scraping functionality. It also supports the following features:

- Navigation through various login mechanisms, including form- and JavaScript-based submission, and HTTP Basic and Digest Authentication with cookie-based session management.

- Fuzzy matching of clippings. If a Web clipping gets reordered within the source page or if its character font, size, or style changes, it will still be identified correctly by the Web page data source and delivered as the portlet content.

- Reuse of a wide range of Web content, including basic support of pages written with HTML 4.0.1 and JavaScript, retrieved through HTTP GET and POST (form submission).

All Web clipping definitions are stored persistently in the Oracle Fusion Middleware infrastructure database or on another Oracle database. Any secure information, such as passwords, is stored in encrypted form, according to the DES (Data Encryption Standard), using Oracle Database encryption technology.

The Source tab of the OmniPortlet Wizard (Figure 3-10) enables you to start the Web Clipping Studio by clicking the Select Web Page button. Once you start the Web Clipping Studio, you can see the Oracle Fusion Middleware Web Clipping online Help.

Note:

For more information on using the Web Page data source, see Section 4.5, "Building an OmniPortlet Based on a Web Page Data Source."

Figure 3-10 Source Tab: Web Page

3.2.3 Filter

After you've selected the data source and specified the data source options, you can further refine your data by using OmniPortlet's filtering options. To use filtering efficiently, it is better to refine the data as much as possible at the data source level on the Source tab, then use the options on the Filter tab to streamline the data. For example, if you are using a SQL data source, you could use a WHERE clause to return only specific data from the specified columns. In this case, you could skip the Filter tab and continue to the View page of the wizard. However, if there are no filtering options at the data source level, you can use the options on the Filter tab to sort your data (Figure 3-11).

Figure 3-11 Filter Tab

3.2.4 View

Once you've specified the data and sorted it, you can choose the view options and layout for your OmniPortlet. The View tab (Figure 3-12) enables you to add Header and Footer text, choose a Layout style that you can later refine on the Layout tab, and enable caching. You can choose from the following layouts:

- Tabular

- Chart

- News

- Bullet

- Form

- HTML

Figure 3-12 View Tab

Note:

For more information on the different layout styles you can use with OmniPortlet, see the next section or click Help in the upper right corner of the page in the OmniPortlet Wizard.

3.2.5 Layout

The Layout tab changes depending on the Layout Style you chose on the View tab, and enables you to further personalize the appearance of your portlet. For example, OmniPortlet supports drill-down hyperlinks in the chart layout. That is, you can set up the chart so that when a user clicks on a specific part of the chart, an action occurs (for example, jump to another URL).

For the other layout styles, you can define each column to display in a specific format, such as plain text, HTML, an image, button, or field. For example, suppose you selected a data source that includes a URL to an image. To see this image, you can select Image for the display of this column. Each column can also be mapped to an action, similar to the behavior of chart hyperlinks.

The following layout styles are available with OmniPortlet:

- Section 3.2.5.1, "Tabular Layout"

- Section 3.2.5.2, "Chart Layout"

- Section 3.2.5.3, "News Layout"

- Section 3.2.5.4, "Bullet Layout"

- Section 3.2.5.5, "Form Layout"

- Section 3.2.5.6, "HTML Layout"

3.2.5.1 Tabular Layout

Once you've chosen the tabular style on the View tab, you can refine the layout on the Layout tab (Figure 3-13). Typically, you use the tabular layout if you have one or more columns of data that you want to display in a table. You can choose Plain to display all rows in the table without any background color, or Alternating to display a background color for every other row in the table.

Figure 3-13 Layout Tab: Tabular Style

Note:

You can control the background color of a portlet through the portal page style. For more information on using portal page styles, see Oracle Fusion Middleware User's Guide for Oracle Portal.

In the Column Layout section, you can choose which data columns to display in the portlet, then select a display format for the data. Here, you can set a column to display a hyperlink, so that a secondary Web page displays when the user clicks that column in the table. You can also specify whether the secondary Web page displays in a new window. Figure 3-14 shows an example of an OmniPortlet using a tabular format.

Figure 3-14 Example of an OmniPortlet Using a Tabular Layout

Note:

For more information on using the OmniPortlet Wizard, click the Help link in the upper right corner of the Layout tab.

3.2.5.2 Chart Layout

You can use the chart layout to display your data graphically, as a bar, pie, or line chart. On the Layout tab (Figure 3-15), you select the chart style and the column layout. When you choose the column layout, you can choose the groups, or columns on which the labels will be based. The category defines the values that will be used to create the chart legend, and the value determines the relative size of the bars, lines, or slices in the chart. You can also select whether the sections of the chart should point to a hyperlink, and whether the targeted information should display in a new window. Figure 3-16 shows an example of the Layout tab for a pie chart layout.

Figure 3-15 Layout Tab: Chart

Note:

To group the information in the chart, you must group the information at the data level (for example, in your SQL query statement). Also, if numeric values in a data source contain formatted strings, commas, or currency (for example, $32,789.00), they are considered to be text and ignored when the chart is generated. You should remove these formatting characters if you want them to be correctly read as numerical values.

Figure 3-16 Example of the Layout Tab for a Pie Chart Layout

You can also define chart hyperlinks so that each bar, pie section, or line links to another Web page. For example, you can display a chart portlet and a report portlet on your portal page, then set up the chart hyperlink to display a row in the report that displays more detailed information about the selected data.

In Figure 3-17, you can see an example of a pie chart. Below the chart, you can see that the category, Department, is used for the legend.

Figure 3-17 Example of an OmniPortlet Using a Pie Chart Layout

3.2.5.3 News Layout

You can use the news layout to display links to articles with brief descriptions for each. You can use this layout to publish information in standard XML formats, such as RDF (Resource Description Framework) or RSS (RDF Site Summary) to your portal page. In the Column Layout section (Figure 3-18), you can add a heading that displays at the top of the portlet. You can also add a logo, or use the scrolling layout so that the user can view all the information in the portlet as it moves vertically. Here, also, you can enter a URL so that another Web page displays when the user clicks on specific data in the portlet. You can also specify whether the secondary Web page displays in a new window.

Figure 3-18 Layout Tab: News

Figure 3-19 shows an example OmniPortlet using a news layout.

Note:

The News Layout Scroll type in OmniPortlet is supported on Microsoft Internet Explorer and Netscape 7.0.

Figure 3-19 Example of an OmniPortlet Using a News Layout

Note:

For more information on using the OmniPortlet Wizard, click the Help link in the upper right corner of the Layout tab.

3.2.5.4 Bullet Layout

You can use the bullet layout to display your data in a bulleted list. The Layout tab (Figure 3-20) provides a variety of different bullet and numbered bullet styles. In the Column Layout section, you can choose how the columns will display in the portlet, as well as whether a second Web page will display when the user clicks that column. You can also specify whether the second Web page displays in a new window.

Figure 3-20 Layout Tab: Bullet

Figure 3-21 shows an example of an OmniPortlet using a bullet layout.

Figure 3-21 Example of an OmniPortlet Using a Bullet Layout

Note:

For more information on using the OmniPortlet Wizard, click the Help link in the upper right corner of the Layout tab.

3.2.5.5 Form Layout

You can use the form layout (Figure 3-22) if you have data you want to display as labels or default values in a form, such as Name: <name>. You can then use portlet parameters and events to pass data to the selected row.

Figure 3-22 Layout Tab: Form

You can also specify whether to display the target of a URL in a new window (Figure 3-23). Figure 3-24 shows an example of an OmniPortlet using a Form layout.

Figure 3-23 Open In New Window Check Box

Figure 3-24 Example of an OmniPortlet Using a Form Layout

Note:

For more information on using the OmniPortlet Wizard, click the Help link in the upper right corner of the Layout tab.

3.2.5.6 HTML Layout

You can use the HTML layout to create a customized look and feel for your portlet by choosing from either a built-in HTML layout and modifying the code, or by creating a new layout from scratch. You can hand-code your own HTML or JavaScript based on data columns that OmniPortlet has retrieved based on the selected data source (Figure 3-25). By coding your own HTML and JavaScript, you have full control over the appearance and can develop a rich interface for your portlet. For an example of using JavaScript in the HTML layout, choose the Sortable Table layout from the Quick Start list on this tab.

Figure 3-25 Layout Tab: HTML

Figure 3-26 shows an example of an OmniPortlet using the HTML layout.

Figure 3-26 Example of an OmniPortlet Using the HTML Layout

3.2.6 Edit Defaults mode

After you have created your OmniPortlet and returned to your portal page, you can click the Edit Defaults icon to change the portlet options if required. You will notice that, in the Edit Defaults mode, there are tabs that correspond to the different steps in the OmniPortlet Wizard (except for the Type step) to directly access the different options. There is also one extra tab, the Events tab, which is explained in the next section.

When you edit an OmniPortlet using the Edit Defaults mode, keep in mind the following notes:

- A new mode, "none," is the default setting for the Locale Personalization Level of OmniPortlet and the Simple Parameter form. This mode indicates that, when you edit the portlet defaults using the Edit Defaults mode, the changes apply to all users, regardless of the current Oracle Portal session language and the locale of your browser. For more information about these settings, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

- You can personalize the portlet at runtime by clicking the Personalize link on the portlet. When you personalize the portlet, a complete copy of the personalization object is created. Since all properties are duplicated, subsequently modifying the portlet through Edit Defaults will not be reflected in the personalized version of the portlet. To ensure the latest changes are made to the portlet, you must click Personalize again (after the modifications from the Edit Defaults wizard are made), then select the Reset to Defaults option.

- By default, the OmniPortlet provider uses the file-based Preference Store to store the personalization object, which stores the object in a file system in the middle-tier. If you decide to deploy OmniPortlet in a multiple middle-tier environment, you must use a shared Preference Store, such as the database Preference Store (DBPreferenceStore). To do so, you can choose to do one of the following:

- Use a file-based Preference Store now, then migrate to the database Preference Store later using the PDK Preference Store Migration Utility.

- Configure OmniPortlet to use the DBPreferenceStore, and follow the steps on configuring Portal Tools and Web providers in Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

3.2.7 Events

On the Events tab (Figure 3-27) in the Edit Defaults mode of the OmniPortlet Wizard, you can identify event parameters based on the portlet parameters you selected on the Source tab.

Figure 3-27 Events Tab of the OmniPortlet Wizard

3.3 Parameters and Events

Out of the box, OmniPortlet can receive up to five parameters and raise up to three events. Each of the events can send one or more parameters. For example, you can set up a chart that displays the employees in a department. When the user clicks one piece of the chart (for example, a department name), an event is raised that sends a parameter to the page. The page may then pass a parameter to all the portlets on that page that display information about the employees. Then, all the portlets on the page display information about the employees in the selected department.

Note:

To learn how to use parameters and events with OmniPortlet, follow the steps in Chapter 4, "Building Example Portlets with OmniPortlet". If you are comfortable with the provider.xml file, you can add more parameters and events by editing the file.

To set up parameters and events, you must first enable the page group to accept parameters and events. In Oracle Portal, parameters and events are enabled by default. Then, you set up each portlet to accept the necessary parameters, and raise the required events. After you've set up the portlet parameters, you can link the portlets together by setting up the page-level parameters and events.

3.3.1 Portlet Parameters and Events

Out of the box, you can define up to five portlet parameters for an OmniPortlet. You can define parameters in the following places:

- On the Source tab of the wizard when you define the OmniPortlet

- On the Source tab when you select Edit Defaults for the OmniPortlet

Figure 3-28 shows the Portlet Parameters section on the Source tab.

Figure 3-28 Source Tab: Portlet Parameters Section

Parameter values determine what data is displayed in the portlet. You can also use a parameter to pass a value in a URL or to embed a value in the portlet text.

Note:

You can learn more about portlet parameters in the online Help, which you can access by clicking the Help link on the Source tab in the OmniPortlet Wizard. The online Help describes portlet parameters in detail, and how to set them up for your OmniPortlet. You can also refer to Oracle Fusion Middleware User's Guide for Oracle Portal.

You can set up each OmniPortlet to raise up to three events. Each event can pass up to three parameters. Each parameter can be a portlet parameter, such as Param1, or a data source column, such as Department_No. You set up events on the Events tab in the Edit Defaults mode of OmniPortlet (Figure 3-29).

Figure 3-29 Events Tab

3.3.2 Page Parameters and Events

After you've set up the parameters and events for each OmniPortlet on a portal page, you can map the portlet parameters and events to other portlets on the same page. For more information on using page parameters and events, see the Oracle Portal online help and Oracle Fusion Middleware User's Guide for Oracle Portal.

4 Building Example Portlets with OmniPortlet

This chapter shows you how to use OmniPortlet to create four portlets based on different data sources: a Web service, a spreadsheet (CSV), XML, and an existing Web page. You will build these portlets based on the various built-in layouts, and will create a separate portlet based on an HTML layout. You will learn how to create and modify these portlets, as well as use page parameters and events to add interactivity to your portal page.

This chapter includes the following sections:

- Section 4.1, "Adding an OmniPortlet Instance to a Portal Page"

- Section 4.2, "Building an OmniPortlet Based on a Web Service"

- Section 4.3, "Building an OmniPortlet Based on a Spreadsheet (CSV)"

- Section 4.4, "Building an OmniPortlet Based on an XML Data Source"

- Section 4.5, "Building an OmniPortlet Based on a Web Page Data Source"

- Section 4.6, "Setting Up Portlet Parameters and Events"

- Section 4.7, "Building an OmniPortlet Using the HTML Layout"

Note:

To learn more about specific pages and tabs in OmniPortlet, click the Help link in the top right corner of the wizard. The online Help describes the contents of the selected page or tab. You can also find more information about using OmniPortlet in Chapter 3, "Creating Portlets with OmniPortlet." or about registering and configuring OmniPortlet with Oracle Portal in Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

At the end of this chapter, you will create a page that contains four portlets, as shown in Figure 4-1.

Figure 4-1 Portal Page with Four OmniPortlet Examples

All four of these example portlets require you to be able to connect to the Internet. If you must use a proxy server to connect to the Internet, you will need to configure the HTTP proxy settings on the OmniPortlet Provider Test page to use proxy authentication. If the OmniPortlet provider has been set up to use proxy authentication that requires your login, you can enter your user information in the Proxy Authentication section of the Source tab in the OmniPortlet wizard. For more information on proxy authentication, refer to Section 3.2.2, "Source." For specific information on configuring the provider's proxy settings, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Note:

The steps in this chapter assume that you are using the OmniPortlet provider that is available with Oracle Portal. If you installed the Oracle Portal Developer Kit separately, you may need to slightly modify the instructions when adding an OmniPortlet instance to the page. Instructions for registering and configuring OmniPortlet with Oracle Portal are located in Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

4.1 Adding an OmniPortlet Instance to a Portal Page

In this section, you will learn how to add an OmniPortlet instance to your portal page.

To add an OmniPortlet instance to a page, perform the following steps:

1. In the Edit mode of the page where you want to add the OmniPortlet, click the Add Portlets icon.

2. On the Add Portlets page, in the Available Portlets list, click the Portlet Builders link.

3. Click the OmniPortlet link.

4. Click OK. The new instance of OmniPortlet now displays on your portal page, as shown in Figure 4-2.

Figure 4-2 OmniPortlet Instance on a Portal Page

Note:

On the IBM Linux on Power platform, if the action buttons (Next, Previous, Finish, and Cancel) are minimized to dots when defining the OmniPortlet, increase the stack size shell limit to unlimited and restart the WLS_PORTAL instance. Run the following command to set the stack size shell limit to unlimited:

prompt> ulimit -s unlimited

4.2 Building an OmniPortlet Based on a Web Service

The steps in this section will show you how to create a portlet that displays weather forecast information for a particular zip code. You will base this portlet on the Web Service available on the Oracle Technology Network. You will need Internet access to be able to complete this section.

To create an OmniPortlet based on a Web Service, perform the following steps:

1. In the new OmniPortlet instance on your portal page, click the Edit Default link to start the OmniPortlet Wizard.

2. On the Type page, select the Web Service radio button, then click Next.

3. On the Source page, in the WSDL URL field, enter the following URL:
http://webservices.oracle.com/WeatherWS/WeatherWS?WSDL

Note:

This Web Service has one method (WeatherWS.giveMeSomeWeatherInfo) and accepts one parameter (param0). If you use a method that has parameters, the parameters will display in this section of the tab. You can enter a sample value for the parameter, then click Test to view the sample XML data, the SOAP response, and the SOAP Request.

4. Click Show Methods.

5. In the Web Service Methods section, in the param0 parameter field, enter a sample Zip code (for example, 94065), then click Test. The Web Service: Test Result window displays, where you can verify the XML data returned by the Web Service, as shown in Figure 4-3.

Figure 4-3 OmniPortlet: Web Service Test Results Page

6. Close the window.
The Source page should look like the image shown in Figure 4-4.

Figure 4-4 OmniPortlet: Web Service Source Tab

Note:

If you do not have access to the Internet, you can use a different Web Service, but keep in mind that your results will not match the example in this chapter.

7. Click Next.

8. On the Filter page, click Next.

9. On the View page, in the Title field, enter Weather Forecast.

10. In the Header Text field, enter Forecast per Zip Code.

11. Make sure the Show Header Text check box is selected, and clear the Show Footer Text check box, as shown in Figure 4-5.

Figure 4-5 OmniPortlet: Web Service View Tab

12. Make sure the Tabular radio button is selected, then click Next.

13. On the Layout page, select the Plain radio button.

14. Specify the Column Label, Column, and Display As properties for your data according to Table 4-1.

Table 4-1 Column Properties for the Weather Forecast Portlet

Column Label

Column

Display As

Day

dayOfWeek

Text

High

hiTemp

Text

Low

lowTemp

Text

Precipitation

precip

Text

(Blank)

img

Image

15. Now that you've completed defining the portlet, click Finish. Your portlet should look like Figure 4-6.

Figure 4-6 OmniPortlet: Web Service Portlet

4.3 Building an OmniPortlet Based on a Spreadsheet (CSV)

The steps in this section show you how to use OmniPortlet to define a portlet that displays regional information based on a spreadsheet (CSV) data source. This portlet will display the population of major U.S. urban areas in a pie chart.

To create an OmniPortlet based on a spreadsheet, perform the following steps:

1. Create a region below the existing region on your portal page.

2. Add an OmniPortlet to this new region.

3. Start the OmniPortlet Wizard by clicking the Edit Default link.

4. On the Type page, select the Spreadsheet radio button, then click Next.

5. On the Source page, in the CSV URL field, replace the existing text with the following CSV:
http://webservices.oracle.com/WeatherWS/city_population.csv

Note:

If you do not have access to the Internet, you can use the default URL, but keep in mind that your results will not match the example in this chapter.

6. Ensure that the Use first row of spreadsheet for column names check box is selected

7. Click Next.

8. On the Filter page, click Next.

9. On the View page, in the Title field, enter Major U.S. Urban Areas - Population.

10. Clear the Show Header Text check box.

11. In the Footer Text field, enter Click a pie section to view the population of the specified urban area.

Note:

The text you just entered in the Footer Text field instructs your end users to click a pie section to view more details about the selected population. To enable this feature, you will need to complete the steps in Section 4.6, "Setting Up Portlet Parameters and Events".

12. Ensure that the Show Footer Text check box is selected.

13. Under Layout Style, select the Chart radio button, then click Next.

14. On the Layout page, select the Pie radio button.

15. In the Width field, enter 300.

16. In the Height field, enter 300.

17. From the Legend list, choose Top.

18. Select the 3D Effect check box.

19. Under Column Layout, from the Group list, choose <None>.

20. From the Category list, choose City.

21. From the Value list, choose Population. The Layout tab should now look like the image shown in Figure 4-7.

Figure 4-7 OmniPortlet: Character-Separated Values (CSV) Layout Tab

22. Click Finish.
Your portlet now displays on your portal page below the Weather Forecast portlet, and should look like Figure 4-8.

Figure 4-8 OmniPortlet: CSV OmniPortlet on the Page

4.4 Building an OmniPortlet Based on an XML Data Source

The steps in this section will show you how to use OmniPortlet to define a portlet that displays news information in a scrolling layout, based on an XML data source.

To create an OmniPortlet based on an XML data source, perform the following steps:

1. Create a region next to the Web Services portlet (Weather Forecast) on your portal page.

2. Add an OmniPortlet to this new region.

3. Start the OmniPortlet Wizard by clicking the Edit Default link.

4. On the Type page, select the XML radio button, then click Next.

5. On the Source page, in the XML URL field, enter the following URL:
http://www.nytimes.com/services/xml/rss/nyt/Travel.xml

Note:

If you do not have access to the Internet, you can use a different RSS feed, but keep in mind that your results will not match the images in this example.

6. In the XSL Filter URL field, enter the following URL for the XSL file:
http://www.oracle.com/technology/products/ias/portal/viewlets/omniportletnews.xsl

Note:

This XSL filter transforms the RSS news feed into the ROWSET/ROW structure that OmniPortlet can consume.

7. Click Next.

8. On the Filter page, click Next.

9. On the View page, in the Title field, enter Travel News.

10. Clear the Show Header Text check box.

11. In the Footer Text field, enter Source: The New York Times.

12. Ensure that the Show Footer Text check box is selected.

13. Under Layout Style, select the News radio button, then click Next.

14. On the Layout page, under News Style, select the Scrolling radio button.

15. In the Width field, enter 475.

16. In the Height field, enter 50.
The News Style section of the Layout tab should now look like the image shown in Figure 4-9.

Figure 4-9 OmniPortlet: XML Layout Tab - News Style

17. Under Column Layout, next to Field 1 choose title from the Column list, Hyperlink from the Action list, and enter ##link## in the URL field, as shown in Figure 4-10.

Figure 4-10 OmniPortlet: News Style Column Layout

18. Next to Field2, choose description from the Column list and leave the default values for the other settings. Ensure this section of the Layout tab looks like Figure 4-11.

Figure 4-11 Column Layout Section of the Layout Tab

19. Click Finish.
Your portlet now displays on your portal page, as shown in Figure 4-12.

Figure 4-12 OmniPortlet: XML Scrolling News OmniPortlet on the Page

4.5 Building an OmniPortlet Based on a Web Page Data Source

The steps in this section will show you how to use OmniPortlet to create a portlet that displays weather information in a text format based on an existing Web Page. In this section, you will use OmniPortlet to clip and scrape content from Web sites.

To create an OmniPortlet based on a Web page data source, perform the following steps:

1. Create a region below the XML portlet (Travel News) on your portal page.

2. Add an OmniPortlet to this new region.

3. Start the OmniPortlet Wizard by clicking the Edit Default link.

4. On the Type tab of the OmniPortlet Wizard, select the Web Page radio button, then click Next.

5. On the Source tab, click Select Web Page.

6. On the Web Clipping Studio page that displays, in the URL Location field (Figure 4-13), enter the URL of the page you want to clip:
http://www.wunderground.com

Note:

You can use a different Web page, but keep in mind that your results will not match the example in this chapter.

Figure 4-13 URL Location Field

Note:

In this example, we use a third party Web site owned by The Weather Underground, Inc. Because this Web site is continually updated based on current weather forecasts, the images and steps included in this section may not reflect exactly what you see when you create this example. As you go further into this example, some of the steps may not work, as the owners may change the technology of this third party Web site.

7. Click Start to display the Web Clipping Studio. You should see the Web page display in the Web Clipping Studio, as shown in Figure 4-14.

Figure 4-14 Web Clipping Studio Containing the www.wunderground.com Home Page

8. On the home page, enter a zip code (for example, 94065) in the Weather field, as shown in Figure 4-15, then click the magnifying glass icon next to the field.

Figure 4-15 Entering the Zip Code 94065 into the Weather Field

9. The weather information for Redwood City, California displays in the Web Clipping Studio. A segment of the page is shown in Figure 4-16.

Figure 4-16 Weather Information for Redwood City, California

10. In the top right corner of the Web Clipping Studio, click the Section button, as shown in Figure 4-17.

Figure 4-17 The Section Button

11. After you click the Section button, you'll notice that the elements of the Web page are broken down, and that a new icon displays called Choose at the top of each section. Figure 4-18 shows a snapshot of the Web Clipping Studio.

Figure 4-18 Web Clipping Studio Displaying the Web Page Sections

12. Find the section shown in Figure 4-19, which shows the weather information for the city you chose (in this example, San Francisco Bay Shoreline).

Figure 4-19 Weather Information for San Francisco Bay Shoreline with the Choose Icon

13. Click the Choose icon for this section, located directly above the "Forecast for San Francisco Bay Shoreline" title bar, as shown in Figure 4-19. The section displays in the Web Clipping Studio, as shown in Figure 4-20.

Figure 4-20 Weather Information Section for San Mateo County in the Web Clipping Studio

14. After you have chosen the clipping, you can refine your data further by scraping the data, that is, selecting specific cells you wish to display in your portlet. Click the Scrape button (Figure 4-21).

Figure 4-21 The Scrape Button

15. While in Scraping mode, you can identify the text pieces in the Web clipping by selecting the check boxes next to each item. You can repeat these items at the column level, row level, or table level.
In this example, we want to show the title and the description of each resulting article from our search. We can repeat the title and description at the row level, so that each result returned by the search displays only the title and the description of every result. In general, you choose the text items in the first row that contains all the pieces you wish to repeat for each row.

After you click the Scrape button, you'll notice that check boxes display next to each item on the Web page, as shown in Figure 4-22.

Figure 4-22 Scraping Check Boxes

16. Select the output you want by selecting the check boxes next to the items.Figure 4-23 shows an example of a check box.

Figure 4-23 Check Box for San Mateo County Title

Note:

Depending on the color of the section you want to select, the check boxes may not be prominently displayed.

17. After you select the check box for "Forecast for San Mateo County," notice that a corresponding label displays in the Data section of the Web Clipping Studio at the bottom of the screen, as shown in Figure 4-24.

Figure 4-24 San Mateo County Label in Data Section

18. In the Name field, enter a more meaningful name, such as "SanMateoCountyForecast." Do not include spaces in the name.

19. Select the fields you wish to display and add the corresponding labels as you select them. The following is a list of sample information we chose for this example, but you can choose your own examples depending on the current weather. You can see the following selected weather information in Figure 4-25:

- Forecast for San Mateo County title

- Today

- Today's Weather

- Thursday

- Thursday's Weather

Figure 4-25 Selected Weather Information

Note:

With the Web page data source, you can select URLs as part of your Web clipping. In Oracle Portal 10.1.2 and later, the context of the application is maintained. So, for example, any images that display on the hyperlinked page will be maintained.

20. Now that you've selected the data you want to display, click the Continue button, as shown in Figure 4-26.

Figure 4-26 The Continue Button

21. On the page that displays, verify that the information in the Clipping Attributes section includes the title: "Weather Underground: Redwood City, California Forecast," as shown in Figure 4-27.

Figure 4-27 Clipping Attributes Section of the Web Clipping Studio

22. Verify that the information in the Clipping Parameters section includes the parameters as shown in Figure 4-28.

Figure 4-28 Clipping Parameters Section of the Web Clipping Studio

23. Select the Clipping Parameter? check box for the second parameter with the name "query."

24. Click OK.

25. On the Source tab of the OmniPortlet Wizard, the new title and description now display. To edit the Web clipping in the Web Clipping Studio, you can click the Select Web Page button again, as shown in Figure 4-29.

Figure 4-29 Web Page Source Tab

26. Under the Clipping Parameters heading, you should see the clipping parameter you set on the previous page, as shown in Figure 4-30:

Figure 4-30 Clipping Parameter to Portlet Parameter Mapping

27. Under the Portlet Parameters heading, next to Param1, set the Default Value to the zip code, 94065, as shown in Figure 4-31.

Figure 4-31 Portlet Parameters Section

28. Click Next.

29. On the Filter tab, click Next.

30. On the View tab, in the Title field, enter Weather Information.

31. In the Footer Text field, enter Source: Weather Underground and make sure the Show Footer Text check box is selected.

32. Under Layout Style, select the News radio button. The View tab should look like Figure 4-32.

Figure 4-32 View Tab with the Options Selected

33. Click Next.

34. Verify that the Layout tab looks like Figure 4-33.

Figure 4-33 Layout Tab

35. Click Finish.

36. Your new Web Page portlet displays on the portal page, and should look like Figure 4-34.

Figure 4-34 Weather Information Portlet on the Portal Page

Now that you have completed building all four example OmniPortlets, your page should look like Figure 4-35.

Figure 4-35 Portal Page Displaying the Four Example OmniPortlets

4.6 Setting Up Portlet Parameters and Events

The steps in this section show you how to set up the portlets and page you created to use parameters. Then, when a user clicks a slice of the pie chart (generating a portlet event) that corresponds to a region (for example, New York), the Weather Forecast per Zip Code portlet (based on a Web Service) and the Weather Information portlet (based on a Web page) will display the corresponding weather information for that region (New York).

To set up portlet parameters and events, you will need to do the following:

- Section 4.6.1, "Configure Portlets to Accept Parameters"

- Section 4.6.2, "Map the Page Parameter to the Portlet Parameters"

- Section 4.6.3, "Configure the Chart Portlet to Use Events"

- Section 4.6.4, "Map the Chart Event to the Page"

4.6.1 Configure Portlets to Accept Parameters

The steps in this section will show you how to configure the two portlets on your page that accept parameters (the Web Service portlet that displays Weather Forecast per Zip Code information and the Web page portlet that displays Weather Information).

To configure the two portlets to accept parameters, perform the following steps:

1. In Edit mode of the page, click the Edit Defaults icon in the top left corner of the Web Services portlet, as shown in Figure 4-36.

Figure 4-36 Edit Defaults Icon in the Web Services Portlet

2. On the Source tab, replace the value of param0 (94065) with ##Param1##, as shown in Figure 4-37.

Figure 4-37 param0 Set to ##Param1##

3. Under Portlet Parameters, set the default value of Param1 to 94065.

4. In the Personalize Page Label field, enter Zip.

5. In the Personalize Page Description field, enter Enter zip code, as shown in Figure 4-38.

Figure 4-38 Portlet Parameters Section of the Web Services Source Tab

6. Click OK.

7. On the portal page, in Edit mode, click the Edit Defaults icon for the Web page portlet, as shown in Figure 4-39.

Figure 4-39 Edit Defaults Icon for the Web Page Portlet

8. On the Source tab, since you have already mapped a portlet parameter to the clipping parameter, you can simply add a label and description to the portlet parameter Param1, as shown in Figure 4-40.

Figure 4-40 Portlet Parameters Section of the Web Page Source Tab

9. Click OK.

You have created two portlet parameters in the Web Services and Web page portlets to accept page parameters. Next, you will map a page parameter to these two portlet parameters.

4.6.2 Map the Page Parameter to the Portlet Parameters

The steps in this section will show you how to map the page parameters to the two portlets you configured in the previous section.

To map the page parameter to the portlet parameters, perform the following steps:

1. On the page, in Edit mode, click the Page: Properties link at the top of the screen, as shown in Figure 4-41.

Figure 4-41 Page: Properties Link

2. Click the Parameters tab.

3. Under New Page Parameter, in the Parameter Name field, enter zip, then click Add, as shown in Figure 4-42.

Figure 4-42 New Page Parameter

4. Under Page Parameter Properties, the new page parameter displays. In the Default Value field, enter 94065, as shown in Figure 4-43.

Figure 4-43 Default Value for the "zip" Page Parameter

5. Under Portlet Parameter Values, you will see a list of portlets listed. If you have followed all the steps in this chapter, you will see four instances of OmniPortlet listed. The Web Services portlet is the first in the list, and the Web Page data source is the fourth (or the bottom) instance of OmniPortlet in the list.

6. Click the arrow next to the first instance of OmniPortlet to expand the Portlet Parameters list, as shown in Figure 4-44.

Figure 4-44 Portlet Parameter Values Section

7. Next to Param1, from the list, choose Page Parameter.

8. From the list that displays, ensure that zip is selected.

9. For the fourth OmniPortlet in the list, follow the same steps to set Param1 to the Page Parameter of zip, as shown in Figure 4-45.

10. Figure 4-45 Portlet Parameters Section of the Page Parameters Tab

The page parameter zip is now mapped to the portlet parameters for the Web Services and Web page portlets. Next, you will set up the chart portlet so that when a slice of the pie chart is clicked, the selected zip code will be sent to the page.

4.6.3 Configure the Chart Portlet to Use Events

The steps in this section will show you how to configure the chart portlet to use events. That is, based on an event in the portlet (such as clicking a slice in a pie chart), an event will occur. In this case, you will configure the portlet so that when a slice is clicked by an end user, the zip code associated with that slice will be sent to the page. Then, the data in the two portlets you configured in Section 4.6.1, "Configure Portlets to Accept Parameters" will refresh depending on the selected zip code.

To configure the chart portlet, perform the following steps:

1. In the Edit mode of the page, click the Edit Defaults icon for the chart portlet, as shown in Figure 4-46.

Figure 4-46 Edit Defaults Icon for the Chart Portlet

2. Click the Layout tab.

3. Under Chart Drilldown, choose Event1 from the Action list.

4. Notice that in Edit Defaults mode, a new tab displays in the wizard called Events. Click the Events tab.

5. On this tab, you will configure Event1 (which you set on the Layout tab) to pass the zip code from the chart to the page as the event output.
Set Event1Param1 to zipcode, as shown in Figure 4-47, then click OK.

6. Figure 4-47 Events Tab for the Chart Portlet

You have configured the chart portlet so that a user can click a slice of the pie chart, and set up an event so that the zip code selected in the pie chart will be sent to the page. Next, you will set up the page to accept this event parameter.

4.6.4 Map the Chart Event to the Page

The steps in this section will show you how to map the chart event you created in the previous section to the page, so that when a user clicks on a slice of the pie chart, the zip code selected in the pie chart will be accepted by the page as the page input. The page will then display the data that corresponds to the selected zip code in the Web Service and Web page portlets.

To map the chart event to the page, perform the following steps:

1. On the page, in Edit mode, click the Page: Properties link, then click the Events tab.

2. Expand the second OmniPortlet in the list to display the events below it, and select Event1, as shown in Figure 4-48.

Figure 4-48 Portlet Events Section of the Page Events Tab

3. Select the Go to page radio button, then, next to the field, click the Browse Pages icon to search for the name of your page (in this case, OmniPortlet Examples). Next to your page name, click Return Object.

Note:

If you do not know the name of the page, you can return to the Edit mode of the page by clicking Cancel. Then, click the Page Group: Properties link to view the display name of the page group. When you return to the Events tab of the Page Properties, you can click the Browse Pages icon to search for the page group, under which you should see the page name.

4. Set the Page Input as shown in Figure 4-49.

Figure 4-49 Page Input on the Events Tab

5. Click OK.

6. Now, when you drag your mouse over the pie chart in the Chart portlet, you should notice that you can click one of the sections. Try clicking on the largest slice (New York). You will notice that the page refreshes.
In the URL of the page, you should see a parameter value set after the page name, for example: OmniPortlet%20Examples?zip=10001. The Weather Forecast information changes, and looks something like Figure 4-50.

Figure 4-50 Weather Forecast (Web Service) Portlet for New York

The Weather Information portlet changes, and looks something like Figure 4-51.

Figure 4-51 Weather Information (Web Page) Portlet for New York

4.7 Building an OmniPortlet Using the HTML Layout

As you can see from the examples in this chapter, you can use any data source with any of the built-in layouts in OmniPortlet. This section will show you how to use the same Web Service data source you used in Section 4.2, "Building an OmniPortlet Based on a Web Service" to create a portlet using the HTML layout in OmniPortlet. At the end of this section, your portlet will look like Figure 4-52.

Figure 4-52 OmniPortlet Using the HTML Layout

To create a portlet using the HTML layout, perform the following steps:

1. Follow steps 1-8 in Section 4.2, "Building an OmniPortlet Based on a Web Service" to use the Web Service data source.

2. On the View tab, under Layout Style, select HTML, then click Next.

3. On the Layout tab, the default layout is a Simple Table.
You can switch the layout using the Quick Start drop-down list, or clear the fields to create your own layout. For this example, use the default Simple Table layout. In the Repeating Section, you can see how OmniPortlet automatically populates the columns from the data source into your layout. You can modify the HTML in any of the sections as you wish.

4. Click Finish. Your portlet looks like Figure 4-53.

5. Figure 4-53 Initial View of an OmniPortlet Using the HTML Layout

6. You'll notice that under "img," the URL displays instead of an actual image. To change the HTML source, click the Edit Defaults (pencil) icon to edit your OmniPortlet.

7. Click the Layout tab.

8. In the Repeating Section, look for the row with the code: <TD>##img##</TD>.

9. Replace this code with: <TD><img src="##img##"></TD>.

10. You can also change the column headers in the Non-Repeating Heading Section. For example, replace:
<TH CLASS='PortletHeading1'>img</TH>"

with

<TH CLASS='PortletHeading1'>Weather Graphic</TH>

11. In the Non-Repeating Heading section, delete the line:
<TH CLASS='PortletHeading1'>Zip Code</TH>

12. In the Repeating Section, delete the line:
<TD>##zipCode##</TD>

13. Perform the same action for any other headings you wish to change, then click Finish. Your portlet now looks like Figure 4-54.

Figure 4-54 Final View of an OmniPortlet Using the HTML Layout

5 Creating Content-Based Portlets with Web Clipping

Web Clipping is a browser-based declarative tool that enables you to integrate any Web application with Oracle Portal. It is designed to give you quick integration by leveraging the Web application's existing user interface. Web Clipping has been implemented as a Web provider using the Oracle Portal Developer Kit, which is a component of Oracle Portal.

With Web Clipping, you can collect Web content into portlets in a single centralized Web page. You can use Web Clipping to consolidate content from Web sites scattered throughout a large organization.

This chapter contains the following sections:

- Section 5.1, "What Is Web Clipping?"

- Section 5.2, "Adding Web Page Content to a Portal Page"

- Section 5.3, "Integrating Authenticated Web Content Using Single Sign-On"

- Section 5.4, "Adding a Web Clipping That Users Can Personalize"

- Section 5.5, "Using Web Clipping Open Transport API"

- Section 5.6, "Migrating from URL-Based Portlets"

- Section 5.7, "Current Limitations for Web Clipping"

Note:

Web Clipping is provided with Oracle Portal 11g Release 1 (11.1.1) and is also available as a download with the Oracle Portal Developer Kit. In Oracle Portal, you can add a Web Clipping portlet from the Oracle Portal Repository in the Portlet Builders folder. If you've downloaded Web Clipping as part of the Oracle Portal Developer Kit, you must register it before you can use it. To learn more about registering a Web provider, see Oracle Fusion Middleware Administrator's Guide for Oracle Portal. You can then add an Web Clipping portlet to any portal page.

5.1 What Is Web Clipping?

Web Clipping allows clipping of an entire Web page or a portion of it and reusing it as a portlet. Basic and HTML-form-based sites may be clipped. Use Web Clipping when you want to copy content from an existing Web page and expose it in your portal as a portlet. The Web Clipping portlet supports the following:

- Navigation through various styles of login mechanisms, including form- and JavaScript-based submission and HTTP Basic and Digest Authentication with cookie-based session management.

- Fuzzy matching of clippings, meaning that if a Web clipping gets reordered within the source page or if its character font, size, or style changes, it will still be identified correctly by the Web Clipping engine and delivered as the portlet content.

- Reuse of a wide range of Web content, including basic support of pages written with HTML 4.0.1, JavaScript, applets, and plug-in enabled content, retrieved through HTTP GET and POST (form submission).

- Personalization, enabling page designers to expose input parameters that page viewers can modify when they personalize the portlet. These parameters can be exposed as public parameters that a page designer can map as Oracle Portal page parameters. This feature enables end users to obtain personalized clippings.

- Integrated authenticated Web content through Single Sign-On, including integration with external applications, which enables you to leverage Oracle Application Server Single Sign-On and to clip content from authenticated external Web sites.

- Inline rendering, enabling you to set up Web Clipping portlets to display links within the context of the portlet. As a result, when a user clicks a link in the Web Clipping portlet, the results display within the same portlet. You can use this feature with internal and external Web sites.

- Proxy authentication, including support for global proxy authentication and per-user authentication. You can specify proxy server authentication details including type (Basic or Digest) and realm, through the Web Clipping Provider Test page. In addition, you can specify one of the following schemes for entering user credentials:

- All users automatically log in using a user name and password you provide.

- All users will need to log in using a user name and password they provide.

- All public users (not authenticated into Portal) automatically log in using a user name and password you provide, while valid users (authenticated into Portal) will need to log in using a user name and password they provide.

See the Oracle Fusion Middleware Administrator's Guide for Oracle Portal for more information.

- Migration from URL-based portlets, enabling you to migrate your URL-based portlets to Web Clipping. See Section 5.6, "Migrating from URL-Based Portlets" for more information.

- Navigation and clipping of HTTPS-based external Web sites, if appropriate server certificates are acquired.

- Open Transport API for customizing authentication mechanisms to clipped sites. By default, Web Clipping provider supports only HTTP challenge-based authentication methods like Basic and Digest, and form submission logins. To support custom authentication methods, like Kerberos proxy authentication, users can use the Web Clipping Transport API. See Section 5.5, "Using Web Clipping Open Transport API" for more information.

- Clipping of page content from HTML 4.0.1 pages, including the following:

- Clipping of <applet>, <body>, <div>, <embed>, <img>, <object>, <ol>, <span>, <table>, and <ul> tagged content

- Preservation of <head> styles and fonts, and Cascading Style Sheets (CSS)

- UTF-8 compliant character sets

- Navigation through hyperlinks (HTTP GET), form submissions (HTTP POST), frames, and URL redirection

- National Language Sets (NLS) in URLs and URL parameters. See Section 5.7, "Current Limitations for Web Clipping" for information about how Web Clipping determines the character set of clipped content.

By default, all Web clipping definitions are stored persistently in the Oracle Fusion Middleware infrastructure database. Any secure information, such as passwords, are stored in encrypted form, according to the Data Encryption Standard (DES), using Oracle encryption technology.

5.2 Adding Web Page Content to a Portal Page

To add Web page content to a portal page, follow the steps described in the following sections:

- Section 5.2.1, "Adding a Web Clipping Portlet to a Page"

- Section 5.2.2, "Selecting a Section of a Web Page to Display in the Web Clipping Portlet"

- Section 5.2.3, "Setting Web Clipping Portlet Properties"

5.2.1 Adding a Web Clipping Portlet to a Page

To add a Web Clipping portlet to an Oracle Portal page, perform the following steps:

1. Navigate to the Page Groups portlet. By default, the Page Groups portlet is located on the Build tab of the Portal Builder page.

2. In the Layout & Appearance section, for Pages, click Browse.

3. Figure 5-1 shows the Page Groups tab with the list of pages. For the page to which you want to add the Web Clipping portlet, click Edit in the Actions column.

Figure 5-1 Selecting a Page

The page you want to edit is displayed.

4. In the region in which you want to add the Web Clipping portlet, click the Add Portlet icon.
Figure 5-2 shows a portion of the page.

Figure 5-2 Adding a Portlet to a Page

5. On the Add Portlets page, in the Available Portlets list, click the Portlet Builders link.

6. Click the Web Clipping Portlet link.

7. Click OK. The new instance of the Web Clipping portlet now displays on your portal page, as shown in Figure 5-3.

Figure 5-3 Web Clipping Portlet Added to a Page

5.2.2 Selecting a Section of a Web Page to Display in the Web Clipping Portlet

To select a section of a Web page to display in the Web Clipping portlet, you use the Web Clipping Studio. Using the Web Clipping Studio, you can do the following:

- Browse for Web content

- Section the chosen target page

- Choose the exact portion of the Web content to clip

- Preview the clipped content as a portlet

- Save the clipped content as a portlet

- Set portlet properties and save the updated portlet information

To select a section of a Web page to display in the Web Clipping portlet, perform the following steps:

1. Above the Web Clipping portlet, click the Edit Defaults icon, as shown in Figure 5-4.

Figure 5-4 Editing Default Settings

The Find a Web Clipping page is displayed.

2. In the URL Location field, enter the location of the starting Web page that links to the content you want to clip, as shown in Figure 5-5.

Figure 5-5 Specifying a URL

3. Click Start.
The Web Clipping Studio displays the page you specified, as shown in Figure 5-6.

Figure 5-6 Browsing to a Page Containing Content for a Web Clipping

Note that the URL in the browser bar changes from:

http://host:port/portal/page?_dad=portal&_schema=PORTAL...

To:

http://host:port/portalTools/webClipping...

4. Browse to the page that contains the content you want to clip.
As you click hyperlinks in the Web page, your navigation links are recorded.

Note:

Any browsing operations that do not contribute to the eventual Web clipping will be discarded. Only the significant browsing operations are recorded for later playback during the show mode; any discarded links are not visited.
For any Web sites that require HTTP Basic or Digest Authentication, a form is displayed that requests user name and password information. This encoded authentication information is recorded as part of the browsing information.

5. Once you display the page that contains the content you want to clip, in the Web Clipping Studio banner, click Section, as shown in Figure 5-7.

Figure 5-7 Sectioning the Target Web Page

Sectioning divides the target Web page into its clippable sections, as shown in Figure 5-8. After you click Section, you are no longer able to browse links in the displayed page. If you want to continue navigation, click Unsection in the Web Clipping Studio banner.

Figure 5-8 Sectioned Target Web Page

6. At the top left of the section of the Web content you want to clip, click Choose.
You can choose only one section as a clipping at a time.

Note:

To increase the number of sections available from which to choose, click Section Smaller in the Web Clipping Studio banner. For example, you would click Section Smaller to drill down one level of nested tables. To decrease the number of sections available from which to choose, click Section Larger.

7. Web Clipping Studio displays a preview of your chosen section. If it is the section you want, click Select in the Web Clipping Studio banner. The Web Clipping Studio displays the Find a Web Clipping page, with the properties of the clipping.
If you do not want to use the section you clipped in your portlet, click Unselect to return to the page containing the section. You can choose another section on the page, or click Unsection to navigate to another page.

Some sections may contain no data, only whitespace. For example, a Web page may contain an HTML <DIV> tag that contains no text or images. If you click Choose on a section that contains no data, Web Clipping displays a preview, but the preview correctly shows only whitespace. In this case, click Unselect in the preview page to return to the sectioned page. Then, select a section containing data.

8. In the Find a Web Clipping page, click OK to display the selected Web clipping in the Web Clipping portlet on your page. (You can edit default properties in the page. See Section 5.2.3, "Setting Web Clipping Portlet Properties" for more information.)
Figure 5-9 shows the content added to the Web Clipping portlet.

Figure 5-9 Clipped Content Added to the Web Clipping Portlet on a Portal Page

Note that the Refresh link in the Web Clipping Portlet retrieves fresh data from the originating Web site. The Portlet Refresh link reloads the portlet, but it may retrieve the data from the cache, depending upon the settings for expiration.

5.2.3 Setting Web Clipping Portlet Properties

You can edit various portlet settings to change the appearance of the Web Clipping portlet and to specify how end users can interact with the portlet.

To set Web Clipping portlet properties, perform the following steps:

1. Choose the section you want, click Select in the Web Clipping Studio banner. Web Clipping Studio displays the Find a Web Clipping page with a Properties section, as shown in Figure 5-10.

Figure 5-10 Properties Section of Find a Web Clipping Page

2. From the URL Rewriting list in the Properties section, choose Inline if you want link targets to be displayed inside the portlet, or choose None if you want link targets to replace the current Portal page in the browser.

3. In the Title field, enter a title to display in the portlet banner.

4. In the Description field, enter a description of the portlet.

5. In the Time Out (seconds) field, enter the amount of time (in seconds) for the Web Clipping provider to attempt to contact the Web page from which the content was clipped.

6. In the Expires (minutes) field, enter the amount of time (in minutes) that cached content is valid. Any requests for portlet content that occur within the time period you specify will be satisfied from the cache.
Once the cache period is exceeded, requests for portlet content will be satisfied by retrieving content from the portlet's Web Clipping data source. The cache will also be refreshed with this content.

7. If you entered any information in a form while clipping content for the Web Clipping portlet, the Parameterize Inputs section is available. Select the Click to start parameterizing check box to customize parameters associated with the Web Clipping portlet content. Then perform the following steps:

1. From the Parameters list, choose the parameters that you want to customize.

2. From the Personalizable list, select a parameter if you want to allow end users to provide their own values for the parameters when they personalize the portlet. Select None if you do not want to allow this.

3. In the Display Name field, enter a name to be displayed for the parameter.

4. In the Default Value field, enter a value to use by default for the parameter.

Section 5.4.3, "Personalizing a Web Clipping Portlet" provides an example of personalizing parameters.

8. Click OK.

5.3 Integrating Authenticated Web Content Using Single Sign-On

This section walks you through an example that demonstrates how you can leverage OracleAS Single Sign-On to integrate content from external Web sites that require authentication into a Web Clipping portlet.

The example incorporates a secured page from Oracle Metalink (an external application) into a Web Clipping portlet.

To integrate an external application, perform the following steps:

1. Set up the external application in Oracle Portal, specifying the authentication information by performing the following steps. Refer to Oracle Fusion Middleware Administrator's Guide for Oracle Portal for more details.

1. Log in to Oracle Portal as a user who has SSO Administration privileges, for example, the orcladmin user.

2. Navigate to the Administer External Applications portlet. (Click the Administer tab, then click the Portal subtab. In the SSO Server Administration section, which is in the right column, select Administer External Applications.)

3. Click Add External Application.

4. In the Create External Application page, in the Application Name field, enter a name for the application, for example, Metalink.

5. For Login URL, enter the URL to log in to the application, for example, http://metalink.oracle.com/metalink/plsql/sit_main.showSitemap?p_showTitle=0. To determine the URL, navigate to the desired application in a browser and note the URL.
For Form-based Authorization, view the source of the login page for the external application and note the URL to be accessed during the login action.

6. For User Name/ID Field Name, enter the field name that the external application uses for the user name. Determine the field name by viewing the source for the desired page. If the Authentication method uses Basic Authentication, you do not need to enter a field name. For Metalink, you do not need to enter anything in this field.

7. For Password Field Name, enter the field name that the external application uses for the password. Determine the field name by viewing the source for the desired page. If the Authentication method uses Basic Authentication, you do not need to enter a field name. For Metalink, you do not need to enter anything in this field.

8. Select Basic Authentication as the authentication method.
Figure 5-11 shows a portion of the Create External Application page:

Figure 5-11 Creating an External Application

9. In the Additional Fields section, you can enter names and values of any additional fields that are submitted with the login form of the external application. To specify a field name that is used to indicate a redirection URL, enter redirectFieldName for Field Name. For this example, you do not need to enter additional fields. Figure 5-12 shows the Additional Fields section.

Figure 5-12 Specifying Redirection

10. Click OK.

11. To test your credentials with Oracle Metalink, in the Administer External Applications page, click the name of the application you just created. Then, in the External Application Login page, log in to the application Oracle Metalink using your Oracle Metalink user name and password.
In the Administer External Applications page, click Close.

For more information about OracleAS Single Sign-On Server and external applications, see the Oracle Application Server Single Sign-On Administrator's Guide.

2. For the Web Clipping portlet, create a new Web Clipping provider by performing the following steps:

1. Click the Administer tab, then click the Portlets tab.

2. Select Register a Provider.

3. In the Register a Provider page, enter webClippingMetalink for the Name and webClipping Metalink for the Display Name. Enter values for Timeout and Timeout Message. Choose Web for the Implementation Style.

4. Click Next.

5. In the General Properties section of the Define Connection page, for the URL, enter:

http://host:port/portalTools/webClipping/providers/webClipping

Note that host:port refers to the host and port where the providers are located. This corresponds to the URL for Oracle Portal.

6. For the user's identity, select The user's identity needs to be mapped to a different name in the Web provider's application, and/or the Web provider requires an external application login for establishment of a browser session. If selecting this option, specify the external application ID below.

7. For External Application ID, click the List of Values icon and select the external application you added.
Figure 5-13 shows the top part of the Define Connections page.

Figure 5-13 Specifying an External Application for a Web Clipping Provider

8. In the User/Session Information section, select User to send user specific information to the provider. For Login Frequency, select Once Per User Session.

9. Check that the proxy settings are correct. If you use a proxy server to contact the Web providers from the middle tier, enter the proxy server for Middle Tier.
If you use a proxy server to contact the Web providers from the portal repository, enter the proxy server for Portal Repository.

Usually, because the Oracle Portal and Web Clipping URLs point to the same middle tier, this step is not necessary.

10. Click Finish.

11. In the Registration Confirmation page, if the registration was successful, click OK.

3. Add a portlet to a page, using the Web Clipping Metalink provider that you just created, by performing the following steps:

1. In Oracle Portal, navigate to the page in which you want to add the portlet.

2. In the region in which you want to add the Web Clipping portlet, click the Add Portlet icon.

3. In the Add Portlets to Region page, search for Web Clipping Metalink. It is located in the Portlet Staging Area. Click it to move it to the Selected Portlets box.

4. Click OK.

Section 5.2.1, "Adding a Web Clipping Portlet to a Page" describes in detail how to add a portlet.

4. If you have not entered your credentials for the External Application representing Metalink, the portlet will contain an Update login information link. Click the link and enter your credentials. Then, click OK.

5. Select a section of a page to display in the Web Clipping portlet, by performing the following steps:

1. In the Web Clipping portlet, click the Edit Defaults icon.
The Find a Web Clipping page is displayed.

2. In the URL Location field, the default URL for the External Application is displayed. Change it to the location of the starting Web page that links to the content you want to clip. In this case, enter http://www.metalink.oracle.com.

3. Click Start. The Web Clipping Studio displays the page you specified. Log in to Oracle Metalink.

4. Browse to the page that contains the content you want to clip. After you display the page that contains the content you want to clip, click Section in the Web Clipping Studio banner. Figure 5-14 shows the external application displayed in Web Clipping Studio.

Figure 5-14 External Application in Web Clipping Studio

5. At the top left of the section of the Web content you want to clip, click Choose.

6. Web Clipping Studio displays a preview of your chosen section. If it is the section you want, click Select in the Web Clipping Studio banner.
The Web Clipping Studio displays the Find a Web Clipping page, with the properties of the clipping, as shown in Figure 5-15.

Figure 5-15 Properties of the External Application

7. In the Find a Web Clipping page, from the URL Rewriting list, choose Inline to specify that you want link targets displayed inside the portlet, rather than in a new browser window. OK to display the selected Web clipping in the Web Clipping portlet on your page, as shown in Figure 5-16.

Figure 5-16 External Application Displayed in Portlet

Now, the Web clipping, even though it is from a page requiring authentication, is available in your portlet.

Note that you can associate only one external application with a provider. For each external application, you must register a new provider. Each portal user accesses the authenticated content using their user name and password for that system, not the page designer's credentials.

5.4 Adding a Web Clipping That Users Can Personalize

This section walks you through an example that demonstrates how you can enable end users to personalize their own view of the content in a Web Clipping portlet.

In the example, you perform the following tasks:

- Section 5.4.1, "Adding a Web Clipping Portlet to a Personal Page"

- Section 5.4.2, "Selecting a Clipping in OTN"

- Section 5.4.3, "Personalizing a Web Clipping Portlet"

5.4.1 Adding a Web Clipping Portlet to a Personal Page

Administrators can set up personal pages for all users. This task assumes that the administrator has enabled this functionality. This task explains how to add the Web Clipping portlet to your personal page. To do this, perform the following steps:

1. In the Work In field of the Page Groups portlet, select the page group that contains personal pages.
By default the Page Groups portlet is located on the Build tab of the Portal Builder page and the Personal Pages are located in Shared Objects page group.

2. In the Pages section, select Personal Pages. Expand the node for the first letter of your user name. To View the Personal pages page (Figure 5-17), click on View link in Page Group portlet.

Figure 5-17 Expanding Page Group Map Nodes

3. Click your Page Name. Your personal page is displayed.

4. In any portlet region, click the Add Portlets icon.

5. In the Add Portlets page, click the Web Clipping Portlet link.
By default, the Web Clipping portlet is located in the Portal Builder page of the Portlet Repository. If you cannot find this page, use the Search field to find the portlet.

6. The Web Clipping portlet is added to the Selected Portlets list. Click OK.

5.4.2 Selecting a Clipping in OTN

In this task, you navigate to the Oracle Technology Network (OTN) and search for specific information, then select the results as the clipping for your portlet. To do this, perform the following steps:

1. In the Web Clipping portlet, click the Edit Defaults icon.

2. In the Web Clipping Studio's Find a Web Clipping page, in the URL Location field, enter:

http://www.oracle.com/technology/products/ias/portal/index.html

Click Start. OTN displays the Portal Center page.

3. Enter a search string in the Search field at the top of the page. For this example, enter "web clipping portlet" (including the quotation marks), then click Search.
The Search result is displayed in the Web Clipping Studio, as shown in Figure 5-18.

Figure 5-18 Searching for Information on OTN

4. Click Section. Web Clipping Studio divides the target Web page into its clippable sections, as shown in Figure 5-19.

Figure 5-19 Sectioning the Target Web Page

5. At the top left corner of the search result, click Choose.
A preview of the search result section displays.

Some sections may contain no data, only whitespace. For example, a Web page may contain an HTML <DIV> tag that contains no text or images. If you click Choose on a section that contains no data, Web Clipping displays a preview, but the preview correctly shows only whitespace. In this case, click Unselect in the preview page to return to the sectioned page. Then, select a section containing data.

6. Click Select to confirm that the search result section is the one you want to clip.

7. In the Find a Web Clipping page, click OK to display the selected Web Clipping in the Web Clipping portlet on your page. Figure 5-20 shows the Web Clipping displayed in the page.

Figure 5-20 Selected Web Clipping Displayed in Web Clipping Portlet

5.4.3 Personalizing a Web Clipping Portlet

In this task, you edit the properties of the Web Clipping portlet to allow end users to display different search results in the portlet. To do this, perform the following tasks:

1. Above the Web Clipping portlet you just added, click the Edit Defaults icon, as shown in Figure 5-21.

Figure 5-21 Clicking Edit Defaults for the Web Clipping Portlet

2. In the Find a Web Clipping page, modify the following items in the Properties section:

- From the URL Rewriting list, choose Inline to specify that you want link targets displayed inside the portlet, rather than in a new browser window.

- In the Title field, enter OTN Search. This title displays in the header of your Web Clipping portlet, as well as the pages where users can personalize parameters for the Web clipping.

Figure 5-22 shows the Properties and Parameterize Inputs sections of the Find a Web Clipping page.

Figure 5-22 Setting Properties for a Web Clipping

3. Because the content displayed in the portlet was reached by entering information in the Search field on OTN, you can customize the parameters used by the search to allow end users to specify their own search string.
In the Parameterize Inputs section, select the Click to start parameterizing check box.

4. In the parameters table, make the following changes:

- In the Parameters column, choose p_Query from the list.

- In the Personalizable column, choose Param1 from the list. You can manually add more parameters in the provider.xml file if you need to.

- In the Display Name column, enter OTN Search.

- Make sure that Default Value displays "web clipping portlet" to be sure you have selected the right parameter.

Figure 5-23 shows the parameters table.

Figure 5-23 Specifying Parameters for User Input

5. Click OK to display the default search results in the Web Clipping portlet on your page.

6. In the Editing Views section, click View Page.

7. In the Web Clipping portlet header, click Personalize, as shown in Figure 5-24.

Figure 5-24 Clicking Personalize in the Web Clipping Portlet Header

8. In the page that displays, scroll down to the Inputs section. Notice that the parameter field for the search string is labeled OTN Search, as you specified for the Display Name for this parameter. In the OTN Search field, enter a different search string. For example, enter OmniPortlet 2004, as shown in Figure 5-25.

Figure 5-25 Specifying Input for Parameters

9. Click OK.
The Web Clipping portlet now displays the results of performing a search on OTN for OmniPortlet 2004 information, as shown in Figure 5-26.

Figure 5-26 New Web Clipping Result Based on Customer Input Parameter

5.5 Using Web Clipping Open Transport API

To support custom authentication methods, users can use the Web Clipping Transport API. To extend the Web Clipping transport layer to support custom authentication methods, users must perform the following implementation and deployment procedures:

Implementation

Users can implement their own transport classes.

- Users can provide overrides for two use cases of the oracle.portal.wcs.transport.http.HttpTransportLiaison interface. In Web Clipping, this interface is used to abstract the HTTP transport layer. By default, the two use cases of this interface are manifested by following implementations:

- HttpClientStudioTransportLiaison, which handles HTTP transport in Web Clipping Studio mode

- HttpClientProviderTransportLiaison, which handles HTTP transport in Web Clipping Producer show mode

To support more authentication methods, users must override the addRequestHeaders methods for both the Studio and Provider HttpClientTransportLiaison implementations to add their own authentication-specific headers. For more information about implementation, see Oracle WebLogic Server Web Clipping Transport API Reference.

- Users must compile the new subclasses and package them into a jar file. To compile the new subclasses, users can use the following command:
javac -classpath path_to_wcejar -d classes/

Where, path_to_wcejar refers to the path to the wce.jar file.

To create the jar file, for example, users can use the following command from the classes directory:

jar cvf ../mytransport.jar

Where, mytransport.jar refers to t he jar file users want to create.

Deployment

Users must deploy the jar file to support the custom authentication method.

- Users must place the jar file into the class path or shared library that is used by the Web Clipping producer at runtime.

- Users must register the transport class in the web.xml file for Web Clipping producer by making the following modifications to the context parameters defined for HttpClientProviderTranportiaison and HttpClientStudioTransportLiaison:

- Change the parameter value for oracle.webclipping.provider.TransportLiaisonClass to the name of the new class extended from the HttpClientProviderTransportLiaison class.

- Change the parameter value for oracle.webclipping.studio.TransportLiaisonClass to the name of the new class extended from the HttpClientStudioTransportLiaison class.

- Finally, users must restart the producer server for the changes to take effect.

5.6 Migrating from URL-Based Portlets

You can migrate URL-based portlets that are stored in a provider.xml file to Web Clipping portlets. These Web Clipping portlets will exist in the Web Clipping Repository, but you can access the portlets through pointers defined in the provider.xml file.

Note that, during the migration process, no modifications will be done on the original files used by these URL-based portlets.

This section describes the following tasks:

- Section 5.6.1, "Preparing for Migration"

- Section 5.6.2, "Performing the Migration"

- Section 5.6.3, "Post-Migration Configuration"

- Section 5.6.4, "Maintaining Migrated Portlets"

- Section 5.6.5, "Limitations in Migrating URL-Based Portlets"

5.6.1 Preparing for Migration

Before you begin the migration, take the following steps:

1. Verify that the Web provider that contains the URL-based portlets you want to migrate is functional. The migration process will not succeed with non-functional URL-based portlets. To verify, make sure that the URL-based portlets are used by your Portal pages and that they appear correctly.

2. Find existing URL-based portlets.
Before you run the migration tool, make sure that you know the file path to the service deployment properties file, which holds pointers to everything about the service, including the path to the provider.xml file that holds the URL services definitions.

You must run the migration tool once for each service. If you have multiple services, find the entire list of service deployment properties files that will be used during migration.

The location of these service deployment properties files may vary depending on individual deployment scenarios. Typically, with JPDK samples, they are located in:

<Domain_home>/servers/WLS_PORTAL/tmp/_WL_user/jpdk

JPDK samples that are shipped with the Oracle Portal are located in the same directory path.

The list of sample service deployment properties files include the following:

- urlbasicauth.properties

- urlexternalauth.properties

- urlnls.properties

- urlparams.properties

- urlsample.properties

- urlssl.properties

In the migration process, the service deployment properties file as well as the provider.xml file used to contain old URL-based portlets will be copied and imported into the Web Clipping application, together with all the previous customizations based on the File Preference store. Because no modifications will be done on the original files used by these URL-based portlets, you do not need to back up any of these files. They can continue to be used as URL-based portlets.

3. Depending on the types of URL-based portlets you have, you may need to rearrange them as follows:

- Because Web Clipping does not offer parallel functionality for the XML Filter capability that URL-based portlets offer, isolate all of the URL-based portlets that use the XML Filter into a separate service deployment (and provider.xml file) that will not be migrated.

- Because you may face limitations when migrating URL-based portlets that use external applications, you may decide that the migration is too costly for that subset of your URL-based portlets. In this case, you can isolate them into a separate service deployment (and provider.xml file) that will not be migrated.

4. Make sure that the machine where you are planning to run the migration tool has local access to the service deployment files and files that the deployment files point to, for both the URL-based portlets provider and the Web Clipping provider.

5. Make sure that both the Web Clipping Repository and the HTTP Proxy are configured, and that the proxy settings concur with those used by your deployment of URL-based portlets. If you have a proxy server that requires authentication, the Web Clipping provider must be configured with Requires Authentication enabled. Set the Login scheme to use a global log in (Use Login below for all users).
Check the Web Clipping Provider Test page at:

http://host:port/portalTools/webClipping/providers/webClipping

See the Oracle Fusion Middleware Administrator's Guide for Oracle Portal for more information about setting proxy authentication.

6. Shut down the WLS instance where your Portal Tools application is running. This step ensures that no modifications are made to the files that will be migrated. Do not restart the WLS instance until after the migration is completed.
To shut down the WLS instance in a Portal instance, use the following command (from the Oracle\Middleware\user_projects\domains\<Domain Name>\bin directory):

stopWebLogic.cmd

Domain Name refers to the domain you have configured for your Portal.

5.6.2 Performing the Migration

The migration tool parses the service deployment properties file to find the provider.xml file that contains the XML definition of the URL-based portlets to be migrated.

The tool changes the Provider Definition class from URLProviderDefinition to WcProviderDefinition. For each of the URL-based portlets defined in the provider.xml file, an equivalent clipping definition is created and inserted into the Web Clipping Repository. Then, the PortletDefinition XML snippet corresponding to the portlet being migrated is replaced with a new one that uses WcPortletDefinition as its class. The replacement XML snippet contains a Clip Id that is a pointer to the newly inserted clipping definition.

The new PortletDefinition XML snippet will no longer contain the same information as it did when it was a URLPortletDefinition. Namely, the migration tool uses the URL to visit as well as the headerTrimTag and footerTrimTag to generate an equivalent Web Clipping definition that will be stored within the Web Clipping Repository and only accessible from the provider.xml file through the Clip Id. The only information remaining will be the title and description. See Section 5.2.3, "Setting Web Clipping Portlet Properties" for instructions on modifying your clipping.

To migrate portlets, take the following steps:

1. Set environment variables as follows:

- On UNIX, set LD_LIBRARY_PATH to either the Install_home/lib or Install_home/lib32, depending on whether the operating system is 32-bit or 64-bit.

- On Windows, set PATH to Install_home\bin.

2. Change to the ORACLE_HOME/portal/jlib directory.

3. Use the following command to import the portlet to Web Clipping:

java -Doracle.ons.oraclehome=ORACLE_HOME -jar wcwebdb.jar -import -from urlservices webclip_depprop urlsvc_depprop

In the example, the parameters have the following meanings:

- ORACLE_HOME refers to the directory where Oracle application is installed.

- webclip_depprop refers to the path to your webClipping service deployment properties file. The path is typically:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\portalTools_11.1.1.1.0\kjdcke\war\WEB-INF\deployment

Inst_Home refers to the location where Portal is installed. WLS_PORTAL refers to the WLS instance where your PortalTools application is deployed.

- urlsvc_depprop refers to the path for the URL-based portlets service deployment properties file that points to URL-based portlets that you wish to migrate.

For example, assume your URL-based portlets are deployed in the following directory on Windows:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\\portalTools_11.1.1.1.0\kjdcke\war\WEB-INF\deployment\providers

5.6.3 Post-Migration Configuration

After you migrate all of the URL-based portlets, take the following steps:

1. Start the WLS instance that hosts your provider.
To start the WLS instance, use the following command:

startWeblogic.cmd

2. Update all Portal instances where URL-Based portlets were previously registered. Go to Portal Navigator to find your previously registered URL-based Portlet provider. Click Edit Registration and then click the Connection tab to edit the connection information to the newly migrated provider. Depending on how you registered the portlet, perform either of the following steps:

- If you previously registered your URL-based Portlet provider using the Service Id mechanism, your provider URL looked similar to the following:

http://host:port/jpdk/jpdk/providers

In this case, because the Service Id field already contains urn:someservice, you now need only to update the provider URL value to the following:

http://host:port/portalTools/webClipping/providers

- If you registered your URL-based Portlet provider using a provider URL that contained the Service Id, your provider URL looked similar to the following:

http://host:port/jpdk/jpdk/providers/service_id

In this case, you need to update the provider to the following:

http://host:port/portalTools/webClipping/providers/service_id

For the most part, the rest of the registration details can remain as they are. However, if you plan on using the in-line rendering functionality of the migrated portlets, you must select Once Per User Session for Login Frequency.

3. Restore HTTP proxy authentication setting that you altered in preparation for the migration. During the migration process, URL-based portlets are converted to Web Clipping portlets. If the Web Clipping provider has originally been configured with Requires Authentication enabled, your migrated URL-based portlets may not function properly.
Check the test page at:

http://host:port/portalTools/webClipping/providers/webClipping

If the Login Scheme is not set to Use login below for all users, then authentication is accomplished by mapping the current portal user to a proxy server username and password. A portal user's proxy server credentials can only be entered through the Personalize link of the Web Clipping portlet. However this cannot be accomplished through the Personalize link of the migrated URL-based portlets. The workaround is to temporarily add a Web Clipping portlet to the page and personalize it to provide the security credentials. After this is complete, you can remove the temporary portlet.

4. Review each Portal page where you had used URL-based portlets and verify that the page still contains the content. Occasionally, you may find that, after migration, what used to be a "trimmed" Web page is now the entire Web page. This may be due to some of the limitations of the migration tool, which are discussed in Section 5.6.5, "Limitations in Migrating URL-Based Portlets." If this happens, edit the portlet by altering the Web Clipping associated with it.

5.6.4 Maintaining Migrated Portlets

After you have migrated the portlets, you no longer use the provider.xml file to edit the portlets. Instead, you use Web Clipping to edit the portlets, as described in Section 5.2.3, "Setting Web Clipping Portlet Properties."

Note the following:

- Whatever modifications you make to the clipping will affect it at the portlet definition level and therefore will affect all the instances of that portlet which may exist across Portal pages.

- When you modify the clipping and you have made the portlet rendering to be Inline, and have registered the provider with a Login Frequency of Once per User Session, then page viewers who have an instance of the particular portlet on their page, will need to log out of Oracle Portal and log in again to see the changes implemented. This feature avoids disruption of the page viewer's usage of a particular portlet when it is being modified.

- For portlets with Web Clippings that require authentication to an external application prior to accessing the page containing the clip, the "off-line" editing mechanism detailed in the previous item does not provide such authentication information. Consequently, there is no way to modify the migrated clipping if the original URL-based portlet uses external applications. There is currently no workaround for this limitation.

5.6.5 Limitations in Migrating URL-Based Portlets

This sections describes limitations in migrating URL-based portlets to Web Clipping and describes some differences between the two methods. Following are the differences:

- There is a fundamental difference between URL-based portlets and Web Clipping in the way that clippings are defined.
URL-based portlets use the headerTrimTags and footerTrimTags tags to define the begin and end of a particular section in an HTML page. On the other hand, Web Clippings use the HTML tag path (for example, html/body/table[2]/tr[2]/td[1]) to denote the path to use when looking for an HTML tag that would contain the clipping within the page.

While the header and footer trim tags for URL-based portlets offer greater flexibility (that is, the clipping does not need to reside within one single HTML tag), it is not as robust. When a clipping can no longer be found in the same location within a page, there is no way to apply fuzzy matching logic to find the clipping again. On the other hand, Web Clipping stores key pieces of information to locate the clipping within the page. If the clipping is not in the same location, the fuzzy match feature looks for other candidates on the same HTML page to account for the possibility that the clip may have moved.

- The migration tool tries to find the clipping (HTML Tag) that encapsulates the headerTrimTags and footerTrimTags. Often, this will not be the exact HTML that was extracted by the URL-based portlet. In these cases, the entire Web page will be returned as the content of the migrated Web Clipping Portlet. To amend this, simply edit the portlet.

- URL-based portlets that have been migrated to Web Clipping do not support proxy authentication by default. This is because URL-based portlets inherently do not support proxy authentication and Web Clipping preserves the edit mode of the portlets. Their edit mode does not provide an opportunity to enter authentication information. To work around this restriction, add an empty Web Clipping portlet to the same portal and use the Web Clipping portlet Personalize link to enter the user name and password for proxy authentication.

- URL-based portlets that used external applications are migrated as full-page Web Clipping portlets. This means that the URL previously specified by the URL-based portlet definition will be the one used to display the full page after the log in process. Whatever headerTrimTags and footerTrimTags you have previously specified will be lost, because external application integration occurs at the Portal side while the migration tool only handles the provider side. Because you are not connected to any Portal instances at the time of the migration, and the external applications framework resides only on the Portal side, the migration tool cannot fetch the authentication information necessary to log in to parse the HTML and use the headerTrimTags and footerTrimTags that you have previously specified to compute an HTML Tag Path to store in the Web Clipping Definition.
In maintaining migrated portlets, you can edit the clipping through links in the test page. However, this does not include URL-based portlets that used external applications to authenticate themselves to the external sites. There is currently no workaround for this issue.

- URL-based portlets that use the XML Filter cannot be migrated to Web Clipping portlets because there is a lack of such a functionality in the Web Clipping Portlet. Before proceeding with migration, make sure that you have backed up the URL-based portlets that use the XML Filter into a separate URL-based portlet provider. You must do this because the migration occurs at the provider level. That is, upon interpreting that a particular provider.xml file has URLProviderDefinition for its provider definition class, all the portlet definitions contained within that provider definition are migrated.

5.7 Current Limitations for Web Clipping

This section describes current limitations for Web Clipping. For information about the latest limitations in a release, be sure to read the Oracle Portal Release Notes. Following are the limitations:

- If the site to which you are connecting uses a large amount of JavaScript to manipulate cookies or uses the JavaScript method document.write to modify the HTML document being written, you may not be able to clip content from the site.

- When you integrate with partner applications (through the use of mod_osso), you cannot clip directly through those partner applications in an authenticated manner. However, you can use the partner applications through the external application framework.

- You cannot use the Web Clipping portlet to clip Oracle Portal pages. As a workaround, examine the portlet that is supplying the data and take the appropriate action, as follows:

- For database provider portlets, use export/import to copy pages across portals.

- For Web provider portlets, re-register the same provider in the destination portal and edit the portal manually.

- You cannot use the Web Clipping portlet to clip a Web page that contains more that one frame, that is, a frameset.

- Note the following about Web Clipping and the use of cascading style sheets (CSS):

- If a Web page contains more than one portlet that uses a CSS, they should not conflict if the CSS uses distinct style names, such as OraRef, to specify a style within an HTML tag, rather than using an HTML tag name, such as <A>, as the name of the style.

- If one portlet uses a CSS, and that CSS overwrites the behavior of HTML tags by using the name of the tag, such as <A>, as the name of the style, and a second portlet on the same page does not use a CSS, the second portlet will be affected by the style instructions of the CSS of the first portlet.

- If two portlets on the same page use a different CSS and each CSS overwrites the behavior of HTML tags by using the name of an HTML tag, such as <A>, as the name of the style, the style that will be displayed depends on the browser.

- Web Clipping checks for NLS settings in the following way:

1. Web Clipping checks the Content-Type in the HTTP header for the charset attribute. If this is present, it assumes that this is the character encoding of the HTML page.

2. If the charset attribute is not present, it checks the HTML META tag on the page to determine the character encoding.

3. If the HTML META tag is not found, Web Clipping uses the charset in the previous browsed page. If this is the first page, it defaults to the ISO-8859-1 character encoding.

4. If the value of the charset for Content-Type or META tag is not supported (for example, if the charset was specified as NONE), Web clipping uses the default character set, ISO-8859-1, not the charset in the previously browsed page.

- To use the Web Clipping portlet, you must use Netscape 7.0 or higher, or Microsoft Internet Explorer 5.5 or higher for Windows 2000, or Microsoft Internet Explorer 6.0 or higher for Windows XP.
If you use browser versions older than these, you may encounter JavaScript errors.

For troubleshooting information, see Appendix B, "Troubleshooting Portlets and Providers."

The script content on this page is for navigation purposes only and does not alter the content in any way.

6 Creating Java Portlets

This chapter explains how to create Java portlets based on the Java Portlet Specification (JSR 168) or the Oracle Portal Developer Kit-Java (PDK-Java) using the JSR 168 Java Portlet Wizard and Java Portlet Wizard in Oracle JDeveloper. This chapter includes the following sections:

- Section 6.1, "Guidelines for Writing Java Portlets"

- Section 6.2, "Introduction to Java Portlet Specification (JPS) and WSRP"

- Section 6.3, "Building JPS-Compliant Portlets with Oracle JDeveloper"

- Section 6.4, "Introduction to Oracle PDK-Java"

- Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper"

The source code for many of the examples referenced in this chapter is available as part of PDK-Java. You can download PDK-Java from the Oracle Portal Developer Kit (PDK) page on Oracle Technology Network (OTN):

http://www.oracle.com/technology/products/ias/portal/pdk.html

When you unzip PDK-Java, you will find the examples in a zip file:

../pdk/jpdk/v2/src.zip

To access the Javadoc reference for PDK-Java, extract jpdk.war from inside of:

../pdk/jpdk/v2/jpdk.ear

Then unzip jpdk.war. The Javadoc is located in a folder called apidoc.

6.1 Guidelines for Writing Java Portlets

When you write your portlets in Java for either the Java Portlet Specification (JPS) or PDK-Java, you should follow the best practices described in this section, which are as follows:

- Section 6.1.1, "Guidelines for Show Modes"

- Section 6.1.2, "Guidelines for Navigation within a Portlet"

- Section 6.1.3, "Guidelines for JavaScript"

- Section 6.1.4, "Guidelines for Mobile Portlets"

6.1.1 Guidelines for Show Modes

Show mode exhibits the runtime portlet functionality seen by users. JPS offers some modes not offered by PDK-Java and vice versa. If you are coding portlets to JPS, you can declare custom portlet modes in portlet.xml that map to the extra modes offered by PDK-Java, or to accommodate any other functionality you may want to provide. For example, the JSR 168 Java Portlet Wizard for JPS portlets includes a custom mode call print, which you can use to provide a printer friendly version of the portlet. Defining custom modes is especially useful if the portlet must interoperate with portal implementations from other vendors

The different Show modes that a portlet may have, each with its own visualization and behavior, are discussed in the following sections:

- Section 6.1.1.1, "Shared Screen Mode (View Mode for JPS)"

- Section 6.1.1.2, "Edit Mode (JPS and Pdk-Java)"

- Section 6.1.1.3, "Edit Defaults Mode (JPS and PDK-Java)"

- Section 6.1.1.4, "Preview Mode (JPS and PDK-Java)"

- Section 6.1.1.5, "Full Screen Mode (PDK-Java)"

- Section 6.1.1.6, "Help Mode (JPS and Oracle Portal)"

- Section 6.1.1.7, "About Mode (JPS and PDK-Java)"

- Section 6.1.1.8, "Link Mode (PDK-Java)"

6.1.1.1 Shared Screen Mode (View Mode for JPS)

A portlet uses Shared Screen mode (known as View mode in JPS) to appear on a page with other portlets. This is the mode most people think about when they envision a portlet. A JPS portlet must have a view mode, the rest are optional.

When developing portlets, you must consider all of the factors that may influence the portlet's appearance on the page, such as the portlet's containing object and the other portlets with which your portlet will share a page. In Oracle Portal, portlets are rendered inside HTML table cells when in Shared Screen mode. This means a portlet can display only content that can be rendered within a table cell, including, among other technologies, HTML, plug-ins, and Java applets. The actual size of the table cell is variable depending on user settings, the browser width, and the amount and style of content in the portlet.

6.1.1.1.1 HTML Guidelines for Rendering Portlets

Plain HTML is the most basic way to render portlets and provides a great deal of flexibility to portlet developers. You can use almost any standard HTML paradigm, such as links, forms, images, and tables, as long as it can display within an HTML table cell. Improperly written HTML may appear inconsistently across different browsers and, in the worst case, could cause parts of your page not to appear at all. Ensure that you adhere to the following rules:

- Use standard HTML. The official HTML specification is available from the W3C (more information available at: http://www.w3.org/MarkUp).

- Avoid unterminated and extraneous tags. The behavior of pages with improperly terminated tags is unpredictable because it depends on what the browser chooses to do. Tools like weblint (http://www.weblint.org) and HTML Tidy (http://www.w3.org/People/Raggett/tidy) can help detect and fix hanging and unnecessary tags.

- Avoid elements that cannot be rendered properly in an HTML table cell. Some constructs cannot be used simply because they do not display correctly in a table cell. Frames, for example, do not appear when inserted in a table.

- Keep portlet content concise. Do not try to take full screen content and expose it through a small portlet. You will only end up with portlet content too small or cramped for smaller monitors. Full screen content is best viewed in Full Screen mode of PDK-Java.

- Do not create fixed-width HTML tables in portlets. You have no way to tell how wide a column your portlet will have on a user's page. If your portlet requires more room than given, it might overlap with another portlet in certain browsers.

- Avoid long, unbroken lines of text. The result is similar to what happens with wide fixed-width tables. Your portlet might overlap other portlets in certain browsers.

- Check behavior when resizing the page. Test your portlet's behavior when the browser window is resized to ensure that it works in different browser window sizes.

- Check behavior when the default browser font changes. People may choose whatever font size they wish and they can change it at any time. Your portlet should handle these situations gracefully.

The HTML you use also impacts the perceived performance of your site. Users judge performance based on how long it takes for them to see the page they requested, and browsers require time to interpret and display HTML. Given that, you should consider the following:

- Avoid deeply nested tables. Deeply nested tables slow performance dramatically in some older browser versions. Oracle Portal draws several levels of tables to render portlets. If your portlets use tables within tables, your users may have to wait quite a while for those pages to render.

- Avoid lengthy, complex HTML. Portlets share a page with other portlets. Thus, portlet generation times can significantly effect the overall performance of the page. If portlets must render complex HTML or wait for external resources, such as third party applications, it can greatly slow the rendering of the page.

6.1.1.1.2 Cascading Style Sheet Guidelines for Rendering Portlets

The fonts and colors of every portlet on a page should match the style settings chosen by the user. To accomplish this goal, these style selections are embedded automatically using a Cascading Style Sheet (CSS) on each Oracle Portal page. The portlets access these settings for their fonts and colors, either directly or using the API.

While different browsers have implemented varying levels of the full CSS specification, Oracle Portal uses a very basic subset of this specification to allow for consistent fonts and colors. CSS implementation levels should not affect the consistency of your pages across browsers. Follow these guidelines for using CSS:

- Use CSS instead of hard coding. Hard coding fonts and colors is extremely dangerous. If you hard code fonts and colors, your portlet may look out of place when the user changes the page style settings. Since you have no way of knowing the user's font and color preference choices, you might also choose to hard code a font color that turns out to be the same as the user's chosen background color, in which case your portlet appears to be invisible to that user.

- Use the CSS APIs to format your text. The stylesheet definition is available at the top of Oracle Portal pages, but you should not call it directly. Instead, use the APIs provided to format your text appropriately. This method ensures that your portlets work even if the stylesheet changes in the future.

- Avoid using CSS for absolute positioning. Since users can personalize their portal pages, you cannot guarantee that your portlet can appear in a particular spot.

- Follow Accessibility Standards. You should ensure that you code you style sheets according to existing accessibility standards (more information available at http://www.w3.org/TR/WCAG10-CSS-TECHS/).

6.1.1.2 Edit Mode (JPS and Pdk-Java)

A portlet uses Edit mode to allow users to personalize the behavior of the portlet. Edit mode provides a list of settings that the user can change. These settings may include the title, type of content, formatting, amount of information, defaults for form elements, and anything that affects the appearance or content of the portlet.

Portal users typically access a portlet's Edit mode by clicking Personalize on the portlet banner. When users click Personalize, a new page appears in the same browser window. The portlet typically creates a Web page representing a dialog box to choose the portlet's settings. After applying the settings, users automatically return to the original page.

6.1.1.2.1 Guidelines for Edit Mode Operations

The following guidelines should govern what you expose to users in Edit mode:

- Allow users to personalize the title of the portlet. The same portlet may be added to the same portal page several times. Allowing the user to personalize the title helps alleviate confusion.

- If using caching, invalidate the content. If personalizations cause a change in portlet display or content, you must ensure that the portlet content is regenerated and not returned from the cache. Otherwise, the user may see incorrect content.

- Do not use Edit mode as an administrative tool. Edit mode is meant to give users a way of changing the behavior of their portlets. If you need to change provider settings or do other administrative tasks, you should create secured portlets specifically for those tasks.

- Only show mobile options when applicable. The portlet can interrogate whether an Oracle Portal instance is enabled for mobile devices. If the instance is not mobile-enabled, then you need not show any mobile-specific options. Furthermore, if the page might serve both mobile and desktop users, you should consider delineating between mobile options and desktop options. Refer to Section 6.1.4.6, "Tailor Personalization Pages" for additional tips.

6.1.1.2.2 Guidelines for Buttons in Edit Mode

For consistency and user convenience, Edit mode should implement the following buttons in the following order:

- OK saves the user personalizations and returns the portlet to shared screen mode.

- Apply saves the user personalizations and reloads the current page.

- Cancel returns the portlet to shared screen mode without saving changes.

6.1.1.2.3 Guidelines for Rendering Personalization Values

When you show the forms used to change personalization settings, you should default the values such that the user does not have to constantly re-enter settings. When rendering the personalization values, use the following sequence to provide consistent behavior:

1. User preference: Query and display this user's personalizations, if available.

2. Instance defaults: If no user personalizations are found, query and display system defaults for the portlet instance. These are set in Edit Defaults mode and apply only to this portlet instance.

3. Portlet defaults: If no system default personalizations are found, display general portlet defaults, which may be blank. General portlet defaults are sometimes hard coded into the portlet but should be overridden if either of the two previous conditions apply.

This logic enables the personalizations to be presented in a predictable way, consistent with the other portlets in the portal. PDK-Java makes this type of logic easy to implement.

6.1.1.3 Edit Defaults Mode (JPS and PDK-Java)

A portlet uses the Edit Defaults mode to enable page designers to customize the default behavior of a particular portlet instance. Edit Defaults mode provides a list of settings that the page designer can change. These settings may include the title, type of content, formatting, amount of information, defaults for form elements, and anything that affects the appearance or content of the portlet.

These default personalization settings can change the appearance and content of that individual portlet for all users. Because Edit Defaults mode defines the system level defaults for what a portlet displays and how it displays it, this mode should not be used as an administrative tool or for managing other portlets.

Page designers access Edit Defaults mode, when editing a page, by clicking the Edit Defaults icon just above the portlet banner.

When users click the Edit Defaults icon, a new page appears in the same browser window. The portlet typically creates a Web page representing a dialog box to customize the portlet instance settings. After applying the settings, users are automatically returned to the original page.

6.1.1.3.1 Guidelines for Edit Defaults Mode Options

The following guidelines should govern what you expose to page designers in Edit Defaults mode:

- If using caching, invalidate the cache. If customizations cause a change in portlet display or content, you must ensure that the portlet content is regenerated and not returned from the cache. Otherwise, the user may see incorrect content.

- Do not use Edit Defaults mode as an administrative tool. Edit Defaults mode gives users a way of changing the behavior of their portlets. If you need to change provider settings or do other administrative tasks, you should create secured portlets specifically for those tasks.

- Only show mobile options when applicable. The portlet can interrogate whether an Oracle Portal instance is enabled for mobile devices. If the instance is not mobile-enabled, then you need not show any mobile-specific options. Furthermore, if the page might serve both mobile and desktop users, you should consider delineating between mobile options and desktop options. Refer to Section 6.1.4.6, "Tailor Personalization Pages" for additional tips.

6.1.1.3.2 Guidelines for Buttons in Edit Defaults Mode

For consistency and user convenience, Edit Defaults mode should implement the following buttons in the following order:

- OK saves the user customizions and returns the portlet to shared screen mode.

- Apply saves the user customizations and reloads the current page.

- Cancel returns the portlet to shared screen mode without saving changes.

6.1.1.3.3 Guidelines for Rendering Personalization Values

When you show the forms used to change customization settings, you should default the values so that the page designer does not have to constantly re-enter settings. When rendering customization values, use the following sequence to provide consistent behavior:

1. Instance preferences: Query and display system defaults for the portlet instance.

2. Portlet defaults: If no system default customizations are found, display general portlet defaults, which may be blank. General portlet defaults are sometimes hard coded into the portlet but should be overridden by system defaults.

This logic enables the customizations to be presented in a predictable way, consistent with the other portlets in the portal.

6.1.1.4 Preview Mode (JPS and PDK-Java)

A portlet uses Preview mode to show the user how the portlet looks before adding it to a page. Preview mode visually represents what the portlet can do.

Portal users typically access a portlet's Preview mode by clicking its Preview icon from the Add Portlet page. A window then displays the preview of the chosen portlet. The user has the option to add that portlet to the page. Portal administrators may access Preview mode from the Portlet Repository.

Guidelines for Preview Mode

The following guidelines should govern what you expose to users in Preview mode:

- Provide an idea of what the portlet does. Preview mode should generate enough content for the user to get an idea of the actual content and functionality of the portlet.

- Keep your portlet previews small. The amount of data produced in this mode should not exceed a few lines of HTML or a screen shot. Preview mode appears in a small area, and exceeding the window's size looks unprofessional and forces users to scroll.

- Do not use live hyperlinks. Links may not behave as expected when rendered in Preview mode. Hyperlinks can be simulated using the underlined font.

- Do not use active form buttons. Forms may not behave as you expect them to when rendered in Preview mode. If you decide to render form elements, do not link them to anything.

6.1.1.5 Full Screen Mode (PDK-Java)

Portlets use Full Screen mode to provide a larger version of the portlet for displaying additional details. Full Screen mode lets a portlet have the entire window to itself.

For example, if a portlet displays expense information, it could show a summary of the top ten spenders in Shared Screen mode and the spending totals for everyone in Full Screen mode. Portlets can also provide a shortcut to Web applications. If a portlet provided an interface to submitting receipts for expenses in Shared Screen mode, it could link to the entire expense application from Full Screen mode.

Portal users access a portlet's Full Screen mode by clicking the title of the portlet.

Technically, JPS portlets do not have Full Screen mode. However, you can implement the equivalent of Full Screen mode for a JPS portlet with View mode (Shared Screen mode) and a maximized state for the window.

6.1.1.6 Help Mode (JPS and Oracle Portal)

A portlet uses Help mode to display information about the functionality of the portlet and how to use it. The user should be able to find useful information about the portlet, its content, and its capabilities with this mode.

Portal users access a portlet's Help mode by clicking Help in the portlet header.

Guidelines for Help Mode

The following guidelines should govern what you expose to users in Help mode:

- Describe how to use the portlet. Users may not know all the features your portlet provides just from its interface. Describe the features and how to get the most out of them.

6.1.1.7 About Mode (JPS and PDK-Java)

Users should be able to see what version of the portlet is currently running, its publication and copyright information, and how to contact the author. Portlets that require registration may link to Web-based applications or contact information from this mode, as well.

Portal users access a portlet's About mode by clicking About on the portlet header. A new page appears in the same browser window. The portlet can either generate the content for this new page or take the user to an existing page or application.

Guidelines for About Mode

The following guidelines should govern what you expose to users in About mode:

- Display relevant copyright, version, and author information. Users want to know what portlet they are using and where they can get more information. The about page may become important when supporting your portlets.

6.1.1.8 Link Mode (PDK-Java)

A portlet uses Link mode to render a link to itself that displays on a mobile page. When the user clicks the link, the portlet is called in Show mode. The portlet then renders itself in the mobile View/Shared Screen mode.

For JPS portlets that declare support of the Oracle Mobile XML content type, Oracle Portal renders the link in one of two ways, as follows:

- Call the portlet's View mode with the MINIMIZED window state, if the portlet declares support for it.

- Otherwise, render a link using the portlet's title.

Guidelines for Link Mode

The following guidelines should govern what you expose to users in Link mode:

- Limit content. The purpose of Link mode is to render a link without extraneous material. Link mode should simply render the short title and possibly some relevant summary information (usually just a word or two).

6.1.2 Guidelines for Navigation within a Portlet

In some ways, navigation between different sections or pages of a single portlet is identical to navigation between standard Web pages. Users can submit forms and click links. In the case of typical, simple Web pages, both of these actions involve sending a message directly to the server responsible for rendering the new content, which is then returned to the client. In the case of portlets, which comprise only part of a page, the form submission or link rendered within the portlet does not directly target the portlet. It passes information to the portlet through the portal. If a link or form within a portlet does not refer back to the portal, then following that link takes the user away from the portal, which is not typically the desired behavior.

The portlet developer does not need to know the detailed mechanics of how the parameters of a form or link get passed around between the user, portal, and portlet. However, they must understand that they cannot write links in a portlet the same way they do for typical, simple Web pages.

6.1.2.1 Types of Links for Portlets

A portlet may render links of four classes, as follows:

- Intraportlet links require the portlet to be aware of the address of Oracle Portal because they actually refer to it in some way.

- Portal links, like intraportlet links, must be aware of the address of Oracle Portal for the same reason.

- External links make no reference to Oracle Portal and behave in portlets as they would do in a normal Web page.

- Internal/Resource links, like external links, also make no reference to Oracle Portal.

Figure 6-1 contains a summary of these link types. The arrows indicate how the links reference the resources to which they logically refer.

Figure 6-1 Oracle Portal Link Types

6.1.2.1.1 Intraportlet Links

Intraportlet links go to different sections or pages within a given portlet. Strictly speaking, they refer to the page containing the portlet, but they contain parameters that cause the portlet to render a different section or page within that page when it is requested by the user.

As a direct consequence, a portlet cannot expect to render links to different sections or pages of itself using relative links or absolute links based on its own server context. Intraportlet link are useful for intraportlet navigation, either as links or form submission targets.

6.1.2.1.2 Portal Links

Portal links refer to significant pages within Oracle Portal, such as the user's home page.

6.1.2.1.3 External Links

External links refer neither to the portlet (through a page) nor to any part of the portal. If selected, these links take the user away from the portal, for example, www.oracle.com.

6.1.2.1.4 Internal/Resource Links

Internal/Resource links refer to internal (to the portlet) resources. Sometimes they are exclusively used internally during portlet rendering, for example as a server side include. On other occasions, they may be used externally to reference portlet resources like images. In this latter case, you can use the PDK-Java constructResourceURL method in the UrlUtils class to retrieve images from behind a firewall using resource proxy.

For example, lottery.jsp of the lottery sample, which is available with PDK-Java, contains resource proxy requests for images.

<%@ page contentType="text/html;charset=UTF-8" %>
<%@ page session="false" import="oracle.portal.provider.v2.render.*" %>
<%@ page import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil" %>
<%@ page import="oracle.portal.provider.v2.url.UrlUtils" %>
<%@ page import="oracle.portal.sample.v2.devguide.lottery.*" %>
<%
LottoPicker picker = new LottoPicker();
picker.setIdentity(request.getRemoteAddr() ); %>
<% PortletRenderRequest portletRequest = (PortletRenderRequest)
request.getAttribute("oracle.portal.PortletRenderRequest"); %>
<% String name = portletRequest.getUser().getName(); %>
<P class="PortletHeading1" ALIGN="CENTER">Hi <%= name %>, Your Specially
Picked</P><P ALIGN="CENTER"><IMG SRC="<%= UrlUtils.constructResourceURL(portletRequest,
HttpPortletRendererUtil.absoluteLink(request, "images/winningnumbers.gif")) %>"
WIDTH="450" HEIGHT="69" ALIGN="BOTTOM" BORDER="0"></P>
<P>
<P ALIGN="CENTER">
<TABLE ALIGN="CENTER" BORDER="0" CELLPADDING="0" CELLSPACING="0">
<TR>
<%
int [] picks = picker.getPicks();
for (int i = 0; i < picks.length; i++) {
%>
<TD>
<IMG SRC="<%= UrlUtils.constructResourceURL(portletRequest,
HttpPortletRendererUtil.absoluteLink(request, "images/ball" + picks[i])) %>
.gif" WIDTH="68" HEIGHT="76" ALIGN="BOTTOM" BORDER="0">
</TD>
<%
}

These calls cause the Parallel Page Engine to make the request to the resource and return it to the browser. For session-based providers, any cookies returned from the original initSession call to the provider are sent with the request back to the provider to maintain the right session context.

6.1.3 Guidelines for JavaScript

You may find the use of JavaScript useful within a portlet, but bear in mind the following guidelines within your portlets:

- You should never use JavaScript to redirect the page in which the portlet is rendered. If you need to direct users elsewhere, you should do so in your portlet action handling code or open a new window in the browser.

- Ensure that identifiers in your JavaScript are qualified. By qualifying your identifiers, you ensure that they are unique and do not clash with any other JavaScript on the page.

6.1.4 Guidelines for Mobile Portlets

Oracle Portal is capable of rendering its pages for both HTML and non-HTML (mobile) devices. When rendering for a mobile device, Oracle Portal requires portlets to generate content in a universal markup language called OracleAS Wireless XML.

Many portlets, known as desktop portlets, generate only HTML responses and as such can only render themselves in standard HTML browsers. Some portlets, known as mobile portlets, generate only OracleAS Wireless XML responses. These portlets can render themselves on any device, including standard HTML browsers. Many portlets, though, take a hybrid approach that renders either HTML or OracleAS Wireless XML depending on the environment. These hybrid portlets can render themselves on any device, but they render best on standard HTML browsers. Although OracleAS Wireless XML is sufficient for HTML responses, it is not as expressive as HTML. Since portlets running in both a desktop and mobile environment are typically accessed using the desktop, developers commonly choose to create hybrid portlets that can provide the best possible rendition in the desktop environment.

When building mobile portlets, you should adhere to the following guidelines:

- Section 6.1.4.1, "Declare Capabilities"

- Section 6.1.4.2, "Declare a Short Title"

- Section 6.1.4.3, "Implement Personalization of the Short Title"

- Section 6.1.4.4, "Implement Link Mode"

- Section 6.1.4.5, "Heed Device Information"

- Section 6.1.4.6, "Tailor Personalization Pages"

For information on how to build mobile-enabled portlets, refer to Section 7.2.10, "Enhancing Portlets for Mobile Devices".

6.1.4.1 Declare Capabilities

To properly manage portlets, Oracle Portal must know the set of content types a portlet generates. Oracle Portal uses this information in the following ways:

- To restrict the Portlet Repository view in the Add Portlet dialog. Only those portlets capable of being rendered on the targeted page will appear in the Add Portlet dialog. For example, when a user invokes the Add Portlet dialog from a mobile design page, only portlets that indicate they can generate OracleAS Wireless XML responses are displayed.

- To display an icon in the Portlet Repository view in the Add Portlet dialog that identifies portlets capable of being rendered on many devices. For example, when a user invokes the Add Portlet dialog from a standard design page, those portlets that are mobile capable are listed with the icon shown in Figure 6-2 to indicate they will also render on mobile devices.

Figure 6-2 Mobile-enabled Icon

- To display only those portlets registered with the capability of generating OracleAS Wireless XML when rendering a standard page on a mobile device.

- To include only those portlets registered with the capability of generating OracleAS Wireless XML when creating a new mobile page based on an existing standard page.

6.1.4.2 Declare a Short Title

The small screen size of the typical mobile device limits the number of characters it can display in a single line without scrolling. Portlet titles, which appear as the menu item label when Oracle Portal renders the mobile page in a menu structure, are often too long for mobile displays. Hence, you can define a short title for your portlet. The short title replaces the standard title where display space is limited.

6.1.4.3 Implement Personalization of the Short Title

The standard portlet title represents the default portlet instance name when rendered in the header of a portlet on a standard page. The portlet's short title represents the default portlet instance name when rendered as a menu item in a mobile page. Just as we recommend that portlets support personalizing the standard title, we also recommend that your portlets support personalizing the short title. This functionality enables the page designer or end user to give the instance a meaningful name.

6.1.4.4 Implement Link Mode

When Oracle Portal renders a standard page to the desktop, it assembles portlets on the page in the tabular layout defined by the page designer. Thus, Oracle Portal aggregates the content of many portlets on a single page. Because of their small displays, mobile devices cannot effectively display the content of multiple portlets on a single page. Instead, the page's portlets appear as links (menu items). Users view portlet content by navigating the menu one portlet at a time. The menu item links typically use the portlet's short name. Since well behaved portlets allow personalization of the short name and the portlet manages its own personalization data, the portlet must participate in rendering the menu item link. To enable this functionality, you can implement the Link mode for portlets. In response to a request to render a portlet in Link mode, a portlet generates a link to itself in the appropriate content type. For example, if the render requests HTML, the portlet returns an anchor tag. If the render requests OracleAS Wireless XML, the portlet returns a SimpleHref tag.

6.1.4.5 Heed Device Information

All requests, whether from mobile devices or the desktop, pass general device information. For example, one passed attribute identifies the device class, such as pcbrowser, pdabrowser, or microbrowser (cell phones). A portlet developer may use this attribute to adjust the response's layout or quantity of data.

6.1.4.6 Tailor Personalization Pages

A single portlet instance must maintain a single set of user personalizations spanning all devices, mobile and desktop. Therefore, the same personalization page appears even if the instance is shared between a standard and mobile page, and some fields apply only to one environment, desktop or mobile. In this situation, the portlet should identify these fields that pertain to only one environment. For example, a portlet might display a mobile-only section on its personalization page. Furthermore, because the mobile capability is configurable, a portlet could remove mobile-only references from its personalization page when it detects that the mobile functionality is disabled.

6.2 Introduction to Java Portlet Specification (JPS) and WSRP

Organizations engaged in enterprise portal projects have found application integration to be a major issue. Until now, users developed portlets using proprietary APIs for a single portal platform and often faced a shortage of available portlets from a particular portal vendor. All this changes with the introduction of the following standards:

- Web Services for Remote Portlets (WSRP)

- Java Portlet Specification (JPS)Foot 1  based on JSR 168

These two standards enable the development of portlets that interoperate with different portal products, and therefore widen the availability of portlets within an organization. This wider availability can, in turn, dramatically increase an organization's productivity when building enterprise portals.

WSRP is a Web services standard that enables the plug-and-play of visual, user-facing Web services with portals or other intermediary Web applications. Being a standard, WSRP enables interoperability between a standards-enabled container and any WSRP portal. WSRP defines the following:

- Web Services Definition Language (WSDL) interface for the invocation of WSRP services

- Markup fragment rules for markup emitted by WSRP services

- The method to publish, find, and bind WSRP services and metadata

JPS is a specification that defines a set of APIs to enable interoperability between portlets and portals, addressing the areas of aggregation, personalization, presentation, and security. JPS defines container services which provide the following:

- A portlet API for coding portlet functionality

- The URL-rewriting mechanism for creating user interaction within a portlet container

- The security and personalization of portlets

Oracle actively participates in the WSRP committee and is also a member of the expert group for JPS.

Note:

HTML forms can be submitted using either the get or post method, but the WSRP standard only requires the consumer (portal) to use the post method. Support of the get method is optional according to the standard. Since portal consumers are not required to support the get method, Oracle recommends that you use the post method when developing your portlets.

The Relationship Between WSRP and JPS

WSRP is a communication protocol between portal servers and portlet containers, while JPS describes the Java Portlet API for building portlets. Combining these standards enables developers to integrate their applications from any internal or external source as portlets with WSRP portals. Building portal pages becomes as simple as selecting portlets from the Oracle Portal repository. Figure 6-3 shows the architecture of the WSRP specification.

Note:

Figure 6-3 illustrates the use of JPS portlets with WSRP, but it should be noted that WSRP can also work with non-JPS portlets.

Figure 6-3 WSRP Specification Architecture

Since Oracle Portal's existing architecture is so similar to the one specified by the WSRP committee, Oracle Portal is able to support communication between our portal and both the new Java Portlet APIs as well as our existing APIs (PDK-Java). Figure 6-4 shows the architecture of the WSRP portal. Notice that the JPS-compliant portlet container uses the WSRP protocol for communication and the PDK-Java portlet container uses Oracle's proprietary SOAP protocol for communication.

Figure 6-4 Oracle Portal's WSRP Architecture

6.3 Building JPS-Compliant Portlets with Oracle JDeveloper

Using the JSR 168 Portlet Wizard in Oracle JDeveloper you can expose your portlet over WSRP quickly and easily.

This section assumes the following:

- You are familiar with portlet terminology such as portlet Show modes. See Chapter 1, "Understanding Portlets" and Section 6.1, "Guidelines for Writing Java Portlets."

- You are already familiar with Oracle JDeveloper and know how to build and deploy Java components using it. You can download Oracle JDeveloper from OTN. Visit the Oracle JDeveloper page on OTN:

http://www.oracle.com/technology/products/jdev/index.html

This section contains the following subsections:

- Section 6.3.1, "Creating a JSR 168 Portlet"

- Section 6.3.2, "Adding Portlet Logic to Your JSR 168 Portlet"

- Section 6.3.3, "Deploying Your JSR 168 Portlet to the Oracle WebLogic Server"

- Section 6.3.4, "Registering and Viewing Your JSR 168 Portlet"

- Section 6.3.5, "Registering WSRP Producers in Enterprise Configurations"

6.3.1 Creating a JSR 168 Portlet

This section walks you through the JSR 168 Java Portlet Wizard. You can choose which portlet Show modes you want to implement and the implementation method (JSP, HTTP servlet, Java class, or HTML). The wizard then creates a simple sample implementation for each of the selected modes.

The steps to create a portlet using the JSR 168 Java Portlet Wizard are as follows:

1. Start Oracle JDeveloper.

2. In the Application Navigator, expand the application under which you want to create your portlet.

3. Right-click the project under which you want to create your portlet, and select New.

Note:

If you do not have a project yet, you can create one in one of the following two ways:

- Right-click an existing application in the Application Navigator and choose New Project. Select Empty Project and click OK. Fill out the Create Project dialog box and click OK.

- Right-click the Applications node and choose New Application. Fill out the Create Application dialog box and click OK. When the Create Project dialog box appears, fill it out and click OK.

4. In New Gallery, expand Web Tier, select Portlets and then Standards-based Java Portlet (JSR 168) (see Figure 6-5).

Note:

Selecting Standards-based Java Portlet opens the Portlet Wizard for creating JPS-compliant portlets. Selecting Oracle PDK-Java Portlet opens the Portlet Wizard for creating PDK-Java portlets.

Figure 6-5 New Gallery Dialog Box for Standards-based Java Portlet

5. Click OK to display the General Portlet Information page (see Figure 6-6).

Figure 6-6 General Portlet Information Page

6. In the Name field, enter a name for the portlet. You can accept the default name or enter your own.

7. In the Class field, enter a name for the class that the wizard will create for the portlet. You can accept the default name provided or enter your own. If you supply your own name, it must be a valid Java name.

8. From the Package list, select the package in which the class will reside. Click the Browse button to find packages within the project. If you do not select a specific package, the wizard uses the default package of the project.

9. From the Language list, select the default language that your portlet will support. The wizard uses English by default.

10. If you want your portlet to support Edit mode, select Enable users to edit portlet content. In the wizard, this option is selected by default..
If you select this option, you can specify the details for the Edit mode later on in the wizard.

11. If you want to create a portlet that supports Oracle WSRP 2.0 extensions, select Enable inter-portlet communication using Oracle WSRP V2 extensions and then click Next.

Note:

JSR 168 portlets built with Oracle extensions can be consumed by any consumer that supports WSRP 2.0. To leverage WSRP 2.0, the portlets must be deployed to the Oracle WebLogic Server.

12. In the Additional Portlet Information page (see Figure 6-7) In the Display Name field, enter a name for your portlet. This name will be displayed in the Oracle Portal catalog or repository.

Figure 6-7 The Additional Portlet Information page

13. In the Portlet Title field, enter a descriptive title for your portlet.
The portlet title is displayed in the Resource Palette or Application Resources panel, so make the title something that will help users decide whether the portlet is useful to them. The portlet title is also displayed on the portlet header when the portlet appears on a page.

14. In the Portlet Title field, enter a title for your portlet. This title will be displayed on the portlet header when the portlet appears on a page.

15. In the Short Title field, enter a shorter title for your portlet. This short title will be displayed on the portlet header when the portlet appears on a page on a mobile device.

16. In the Description field, enter a description of your portlet. This description will be displayed beneath the portlet name in the Portlet Repository.

17. In the Keywords field, enter any additional keywords to help users find your portlet in a search.

18. Click Next to display the Content Types and Portlet Modes page shown in Figure 6-8.
Alternatively, you can click Finish to create the portlet immediately, using the default values for all remaining settings.

Figure 6-8 Content Types and Portlet Modes Page

19. By default, your portlet will display text/html as the content type. If you want to add other content types, select text/html, then click Add.
The list of available content types displays (Figure 6-9). Select the desired content types in the Available list and use the arrow buttons to move them to the Selected list. When you are finished, click OK.

Figure 6-9 Content Types Dialog Box

20. By default, your portlet includes view mode. If you selected Editable on the General Portlet Properties page, your portlet also includes Edit mode. If you want to include additional portlet Show modes, select an existing Show mode (for example, view), then click Add.
The list of available portlet Show modes displays (Figure 6-10). You can add Show modes by moving the desired modes from the Available list to the Selected list. When you are finished, click OK. For more information about portlet Show modes, see Section 6.1, "Guidelines for Writing Java Portlets."

Figure 6-10 Portlet Modes Dialog Box

21. Once you have added all of the desired portlet Show modes, choose a function to be performed for each mode. For each portlet mode, click the portlet mode and select an option on the right as follows:

- Select Generate JSP if you want Oracle JDeveloper to generate a JSP for the portlet mode. Enter a name for the JSP in the corresponding field, or accept the defaults.
When you complete the wizard, the generated JSP displays in the Application Navigator where it can be selected for further development. This is the default selection for all portlet display modes. This selection enters code in the generated portlet java class that routes requests for the given mode to the generated JSP.

- Select Generate ADF-Faces JSPX to generate .jspx files. The .jspx files will generate exactly the same markup as JSPs.

- Select Map to Path if you want to map the portlet to an existing Web resource, such as a page. Enter the path in the corresponding field. With this selection, you must write the targeted resource or file yourself. The target could be, for example, a JSP, a servlet, or an HTML file. This selection enters code in the generated portlet java class that routes requests for the given mode to the specified target.

- Select Custom Code if you want to implement the portlet mode through a custom coded object. You will create this object later. This selection generates a skeleton method to render content (private void do<MODE_NAME><CONTENT_TYPE>) in the generated portlet Java class. You must update this code to render useful content.

22. Click Next.
If you selected Editable on the General Portlet Properties page earlier in the wizard, then the Customization Preferences page displays(Figure 6-11). Go to step 23.

If you did not select this option, then the Security Roles page displays (Figure 6-13). Go to step 31.

Figure 6-11 Customization Preferences Page

23. If you want to include additional customization preferences, click Add. The Add New Preferences dialog box displays.

Figure 6-12 Add New Preference Dialog Box

24. In the Name field, enter a name for the new preference. The name must be unique in the portlet. Use only letters, numbers, and the underscore character.

25. In the Default Value(s) field, enter one or more default values for the new customization preference. Separate multiple values with commas.

26. Select the Translate Preference check box if you want the customization preference value to be translated. If you select this option, Oracle JDeveloper generates a resource bundle class with strings for which you can obtain translations. At run time, the portlet references the resource bundle entries.

Note:

The Name is always translated, but there is not always a need to translate the Default Value. For example, if the value is an integer, no translation is needed

27. Click OK. Repeat the preceding steps if you want to add more customization preferences.

28. To edit details for existing customization preferences, select the preference in the Portlet Preferences list and edit the fields in the Preference Details section.

29. To delete an existing customization preference, select the preference in the Portlet Preferences list and click Remove.

30. Click Next to display the Security Roles page (Figure 6-13).

Figure 6-13 Security Roles Page

31. JSR 168 portlets may use J2EE security roles that are defined in web.xml and referenced in portlet.xml. The Available list displays the security roles defined in the portlet application's Web deployment file (web.xml). Moving a security role from the Available list to the Selected list creates a reference to the security role in the application's portlet deployment file (portlet.xml) that refers to the security role in web.xml.

32. If you want to define a new security role, click New Security Role. The Create New Security Role dialog box displays (Figure 6-14).

Figure 6-14 Create New Security Role Dialog Box

33. In the Name field, enter a unique name for the security role.

34. In the Description field, enter a description for the security role, explaining the access privileges and restrictions this role will have on the portlet.

35. Click OK.
The new security role is added to the Available list. You can also manually create security roles.

36. Click Next to display the Caching Option page (Figure 6-15).

Figure 6-15 Caching Option Page

37. Select Cache Portlet if you want to enable caching for your portlet.
Selecting this option indicates that portlet caching is managed by the portlet container. The portlet itself may choose to cache content for any given response. The settings on this page apply only when the portlet itself does not specify a caching condition for a response.

38. In the Default Expiry Conditions section, select:

- Cache Content Expires After [] Seconds if you want the cached portlet content to expire after a certain amount of time. Specify the time limit in the adjacent field.

- Cache Content Never Expires if you do not want the cached portlet content to expire. You may want to select this option if the portlet contains static content that is unlikely to change.

Note:

If you do not want any default caching for this portlet, choose Do Not Cache By Default. In this case, the wizard actually sets a cache duration of 0 seconds. As stated earlier, this cache setting only comes into play when the portlet itself does not specify a caching condition for a response.
If you choose no caching here and you later decide that you want default caching for the portlet, you can easily go back and change the cache duration value in the portlet.xml file, which is generated by the wizard, to a number greater than zero.

39. Click Next to display the Initialization Parameters page (Figure 6-16).

Figure 6-16 Initialization Parameters Page

40. Initialization parameters provide the Web application developer, who decides what goes into the .war file, an alternative to JNDI variables for configuring the behavior of all of the different components of the Web application (for example, servlets and portlets) in a compatible way. These initialization parameters are added to the portlet.xml file.
If you want to add an initialization parameter, click New. This adds a new row to the table of parameters. You can then double click the row to edit the details.

41. In the Name field, enter a unique name for the initialization parameter. Use only letters, numbers, and the underscore character.

42. In the Value field, enter a default value for the parameter.

43. In the Description field, enter a description for the parameter.

44. To delete an initialization parameter, select it in the table and click Remove.

45. Click Next to display the Finish page.

Note:

If your Portal is WSRP2 enabled, then the Portal Navigation Parameters page appears. Click Next to display the Finish page.

46. Click Finish to generate the files for your portlet. The following files should be generated for your project node in the Application Navigator (see Figure 6-17):

- If you selected Generate JSP for the portlet modes, generated code for each mode
If you selected Custom Code instead, that code will reside in the portlet's Java class.

- Two Java classes

- <packagename>.<portletname>.java is invoked by the portlet container and contains all the methods required by the portlet standards

- <packagename>.<portletname>Bundle.java contains all the translation strings for the portlet

- portlet.xml

- oracle-portlet.xml

- web.xml

Figure 6-17 Application Navigator

6.3.2 Adding Portlet Logic to Your JSR 168 Portlet

After you create the default implementation of your portlet, you can extend the sample code with your own business logic to implement the desired functionality and features. See the JPS or Javadoc for more information on adding functionality and features.

6.3.3 Deploying Your JSR 168 Portlet to the Oracle WebLogic Server

After you finish the wizard and successfully generate your portlet, you are ready to deploy it to the Oracle WebLogic Server. To create and deploy a WAR file, perform the following steps:

1. In the Application Navigator, right-click the project that contains your portlet and select New.

2. In the New Gallery, expand General and select Deployment Profiles.

3. In the Items list, select WAR File and click OK.
The Create Deployment Profile -- WAR File dialog box opens.

4. In the Deployment Profile Name field, enter a meaningful name for the deployment profile (for example, webapp).

5. Click OK.
The Edit WAR Deployment Profile Properties dialog box opens.

6. Under Web Application's Context Root, select Specify J2EE Web Context Root and enter the context root in the corresponding field, for example my-portlet.

7. Click OK.
The Project Properties dialog box opens.

8. Click OK.

9. In the Application Navigator, right-click your project and select Deploy, then select the deployment profile, next select to, and finally select the IntegratedWLSConnection.

10. In the Select deployment type dialog box, select Yes and click OK.

11. When the Deployment Finished message displays in the Deployment Log at the bottom of Oracle JDeveloper, verify that no errors occurred.

12. Construct the WSDL URL for your JPS-compliant portlet as follows:

http://host:port/context-root/portlets/wsrp2?WSDL

where host is the server to which your producer has been deployed.

port is the Oracle Web Cache HTTP Listener port from the Ports tab of the Application Server Control Console main page.

context-root is the Web Application's Context Root, which is found in the WAR Deployment Profile Properties under General.

13. In a Web browser, enter the WSDL URL from the previous step to ensure that it is working. If the WSDL definition does not appear in the browser, then the deployment of your WAR file must have failed. Refer to Appendix B, "Diagnosing Java Portlet Problems".

14. If you are using SSL (HTTPS), you must modify your WSDL URL before registering the producer with Oracle Portal. If you are not using SSL, you may skip to the next step now.

Note:

In order for HTTPS to work with a producer, you must have previously configured the server certificate in the infrastructure server certificate store as described in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

To modify your WSDL URL, perform the following steps:

1. In a Web browser, enter the HTTPS WSDL URL. For example:

http://host:port/context-root/portlets/WSRPBaseService?WSDL

Each port in the definition should be displayed with an HTTPS location, for example:

<wsdl:port binding="bind:WSRP_v1_Markup_Binding_SOAP" name="WSRPBaseService">
<soap:address location="https://host:port/context-root/portlets/WSRPBaseService"/>
</wsdl:port>

2. If the ports are not listed with HTTPS locations, you must change them manually before proceeding. You can do this by saving the XML to a file from the browser and opening it in a text editor.

3. Save a copy of the WSDL definition to a file on your application server in a location where it can be accessed externally over HTTP. For example, the htdocs directory of your Apache installation. When you register the producer in Oracle Portal, use the location of this WSDL for your WSDL URL on the Define Connection page of the registration.

15. You should now register your producer and view your portlet. Refer to Section 6.3.4, "Registering and Viewing Your JSR 168 Portlet".
When you redeploy your portlets to the portlet container, all existing sessions between the producer and all of its consumers are lost. If a consumer tries to reuse an existing producer session, it may receive an error message the first time it tries to contact the producer after redeployment.

Error: Could not get markup. The cookie or session is invalid or there is a runtime exception.

To reestablish the producer's session, refresh the portal page. You won't see this error message if you are re-accessing the portlet from a new browser session because it automatically establishes a new producer session.

6.3.4 Registering and Viewing Your JSR 168 Portlet

After you've created and deployed the provider and its portlets, you should register the provider with Oracle Portal. Registering your provider gives Oracle Portal the information it needs to locate and communicate with that provider. After you register a provider, the provider and its portlets become available in the Portlet Repository. They are also listed in the Oracle Portal Navigator.

Note:

When you build portlets and providers with built-in tools, such as the Portlet Builder, Oracle Portal automatically registers the provider for you. Once you've created your portlet, it automatically displays in the Portlet Repository. Oracle Portal also offers built-in portlets that are contained in a preconfigured provider. For example, OmniPortlet and Web Clipping are portlets that you can use out of the box, and are already registered with Oracle Portal. You can view these portlets in the Add Portlets list. However, if you build the portlets and providers programmatically, you must then register these providers to make them available to the portal user.

To register providers for your standards-based portlets:

1. Open Oracle Portal and log in. Note that to register your provider, you need to have Manage or Edit privileges on providers. If you do not have these privileges, you need to request them from your administrator.

Note:

If you do not want to install Oracle Portal but you still need to test your portlets, you may want to use the Oracle Portal Verification Service on OTN to validate your WSRP producers: http://portalstandards.oracle.com/portal/page/portal/OracleHostedWSRPPortal/Welcome

2. If you are not already on the Portal Builder page, click Builder in the upper right corner.

3. Click the Administer tab.

4. Click the Portlets subtab.

5. In the Remote Providers portlet, click Register a Provider to display the Register Provider page (Figure 6-18).

Figure 6-18 Register Provider Page

6. In the Name field, enter the name of the provider. This name must not be more than 200 characters or contain spaces or other special characters.

7. In the Display Name field, enter a name to display for the provider when it is referenced, for example in the Portlet Repository. The display name must not be more than 200 characters.

8. In the Timeout field, enter the number of seconds Oracle Portal should try to connect to the provider before displaying the timeout message.

9. In the Timeout Message field, enter the message to display when Oracle Portal cannot establish contact with the provider within the number of seconds specified in the Timeout field. The message displays within the body of the portlet. The message may not contain HTML or mobileXML.

10. From the Implementation Style list, select WSRP for your WSRP provider.

Note:

If a provider is unavailable for some reason, it can slow down the rendering of pages that contain portlets from that provider. By default, Oracle Portal waits until all portlets are returned before completing the page assembly. To avoid delays, you can set a time limit using the Page Assembly Timeout on the Main tab of the page properties. If Oracle Portal cannot retrieve the portlet from the provider within the specified timeout period, it will render the page without the portlet. If, at a later time, the provider becomes available, Oracle Portal refreshes the page, adding the missing portlets. In this way, page rendering is never halted due to the unavailability of a particular provider. For more information about Page Assembly Timeout, see the Oracle Fusion Middleware User's Guide for Oracle Portal.

11. Click Next to display the Define Connection page (Figure 6-19).

12. In the WSDL URL field, enter the WSDL URL for your provider. For example:

http://myserver.com:8888/my-portlet/portlets/WSRPBaseService?WSDL

Figure 6-19 Define Connection Page

Note:

A WSRP producer can contain portlets that work within the WLDL v1 or v2 framework. WLDL v1 portlets work in pre-11gR1 Oracle Portal releases. WSDL v2 portlets work in Oracle Portal 11gR1. When a WSRP producer containing v2 portlets is registered with its v1 URL, the portlet repository displays the v1 registration name and only the v1 portlets.
So, when a WSRP producer containing only v2 portlets is registered with its v1 URL, the portlet repository displays only the registration name; it does not display any portlet.

13. Click Next to display the Portal Registration Property Values page (Figure 6-20).

14. Provide any registration properties required by the provider. If there are none, you can proceed to the next step.

Figure 6-20 Provider Registration Property Values Page

15. Click Finish. You should see a Registration Confirmation page similar to the one in Figure 6-21.

Figure 6-21 Registration Confirmation Page

16. Your portlet should now be available for adding to pages just as any other portlet in the Portlet Repository. To add your portlet to a page, follow the instructions in the Oracle Fusion Middleware User's Guide for Oracle Portal.

6.3.5 Registering WSRP Producers in Enterprise Configurations

When you register a WSRP producer in an Enterprise configuration, you must create a Web Seringy!!vices Definition Language (WSDL) document manually, then register the WSRP producer using that WSDL. This is because the dynamically generated WSDL creates URLs using the HTTPS protocol and the HTTPS port while WSRP producers use HTTP.

Note:

A producer for WSRP portlets is analogous to a provider for PDK-Java portlets.

To create a WSDL document manually, perform the following tasks:

1. View the dynamically generated WSDL through your browser (preferably Internet Explorer).
To view the WSDL for our WSRP samples, go to:

http://host:external http port/portletapp/portlets?WSDL

2. Save the file from the browser to any externally available location.
For our WSRP Samples, save the file from the browser into the following directory:

ORACLE_HOME/j2ee/home/applications/portletapp/wsrp-samples

Save the file as wsrpsamples.wsdl.

3. Edit the file, replacing https with http and correcting the ports to be the external http ports.

4. View the file through a browser.
For example, for our WSRP Samples use the following URL:

http://host:external http port/portletapp/wsrpsamples.wsdl

5. Use the URL to your *.wsdl file (such as the URL under Step 4) when you register the WSRP producer.

For more information about Enterprise configurations, see the Oracle Fusion Middleware Enterprise Architecture and Deployment Guide.

6.4 Introduction to Oracle PDK-Java

Oracle PDK-Java gives you a framework to simplify the development of Java portlets by providing commonly required utilities and allowing you to leverage existing development skills and application components such as JSPs, servlets, and static HTML pages. Oracle PDK-Java also enables you to create portlets without having to deal directly with the complexity of communications between Oracle Portal and providers.

The Oracle PDK-Java framework is divided into the following areas:

- The Provider Adapter insulates the developer from the HTTP syntax defined by Oracle Portal for communication with Web providers. It translates the information passed between Oracle Portal and your Java Web provider. Without an adapter, your provider would not only manage portlets, but it would also have to communicate this information directly to Oracle Portal in the expected language. The adapter eliminates the need for your Web provider to understand the portal language and vice-versa.

- The Provider Interface defines the APIs (functions) required by your Java implementation to integrate with the Provider Adapter. The Provider Adapter receives messages from the portal, translates them into calls to the Provider Interface, and translates the provider's response into a format that the portal can understand. The Provider Interface contains a set of Java classes that define the methods your provider needs to implement and, in many cases, provides a standard implementation. Some of the primary classes are as follows:

- ProviderDefinition (oracle.portal.provider.v2.ProviderDefinition)

- ProviderInstance (oracle.portal.provider.v2.ProviderInstance)

- PortletDefinition (oracle.portal.provider.v2.PortletDefinition)

- PortletInstance (oracle.portal.provider.v2.PortletInstance)

- ParameterDefinition (oracle.portal.provider.v2.ParameterDefinition)

- EventDefinition (oracle.portal.provider.v2.EventDefinition)

- The Provider Runtime provides a base implementation that follows the specification of the Provider Interface. The Provider Runtime includes a set of default classes that implement each one of the Provider Interfaces and enables you to leverage the rendering, personalization, and security frameworks provided with PDK-Java. These classes and the associated frameworks simplify the development of a provider by implementing common functions for Oracle Portal requests and providing a declarative mechanism for configuring the provider. Using the Provider Runtime, you can focus your development efforts on the portlets themselves rather than the infrastructure needed to communicate with the portal. If the standard behavior of the Provider Runtime does not meet your requirements, you can easily extend or override specific behaviors. Some of the primary classes are as follows:

- DefaultProviderDefinition (oracle.portal.provider.v2.DefaultProviderDefinition)

- DefaultProviderInstance (oracle.portal.provider.v2.DefaultProviderInstance)

- DefaultPortletDefinition (oracle.portal.provider.v2.DefaultPortletDefinition)

- DefaultPortletInstance (oracle.portal.provider.v2.DefaultPortletInstance)

- PortletRenderer (oracle.portal.provider.v2.render.PortletRenderer)

- PortletPersonalizationManager (oracle.portal.provider.v2.personalize.PortletPersonalizationManager)

- PortletSecurityManager (oracle.portal.provider.v1.http.DefaultSecurityManager)

- The Provider Utilities provide methods for simplifying the rendering of portlets. The utilities include methods for constructing valid links (hrefs), rendering the portlet's container (including the header), rendering HTML forms that work within a portal page, and supporting portlet caching.

6.5 Building Oracle PDK-Java Portlets with Oracle JDeveloper

Using the Oracle PDK-Java Portlet Wizard in Oracle JDeveloper you can begin your portlet development quickly and easily.

This section assumes the following:

- You are familiar with portlet terminology such as portlet Show modes. Refer to Chapter 1, "Understanding Portlets" and Section 6.1, "Guidelines for Writing Java Portlets".

- You are already familiar with Oracle JDeveloper and know how to build and deploy Java components using it. You can download Oracle JDeveloper from OTN. Visit the Oracle JDeveloper page on OTN:

http://www.oracle.com/technology/products/jdev/index.html

This section contains the following sections:

- Section 6.5.1, "Creating an Oracle PDK-Java Portlet and Provider"

- Section 6.5.2, "Adding Portlet Logic to Your Oracle PDK-Java Portlet"

- Section 6.5.3, "Validating Your Oracle PDK-Java Portlet and Provider"

- Section 6.5.4, "Deploying Your Oracle PDK-Java Portlet to an Application Server"

- Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet"

6.5.1 Creating an Oracle PDK-Java Portlet and Provider

This section walks you through the Oracle PDK-Java Portlet Wizard. You can choose which portlet Show modes you want to implement and the implementation method (JSP, HTTP servlet, Java class, or HTML). The wizard then creates a simple sample implementation for each of the selected modes.

The steps to create a portlet and provider are as follows:

1. Start Oracle JDeveloper.

2. In the Application Navigator, expand the application under which you want to create your portlet.

3. Right-click the project under which you want to create your portlet, and select New.

Note:

If you do not have a project yet, you can create one in one of the following ways:

- Right-click an existing application in the Application Navigator and choose New Project. Select Empty Project and click OK. Fill out the Create Project dialog box and click OK.

- Right-click the Applications node and choose New Application. Fill out the Create Application dialog box and click OK. When the Create Project dialog box appears, fill it out and click OK.

4. In the New Gallery, expand the Web Tier category and select Portlets.

5. In the Items list, select Oracle PDK-Java Portlet (Figure 6-22).

Note:

Selecting Standards-based Java Portlet opens the Portlet Wizard for creating JPS-compliant portlets. Selecting Oracle PDK-Java Portlet opens the Portlet Wizard for creating PDK-Java portlets.

Figure 6-22 New Gallery Dialog Box for Oracle PDK-Java Portlet

6. Click OK to display the Provider Details Page (Figure 6-23).

Figure 6-23 Provider Details Page

7. In the Provider Details page, enter a name for the new producer that will contain your portlet. This name must be unique within the project. In the PDK-Java, the term provider is used instead of producer. A provider is exactly the same thing as a producer.

8. Select Generate Deployment Properties File.
This automatically generates two .properties files:

- serviceID.properties defines properties for a producer with that service ID. The service ID has the same value as the producer name.

- _default.properties is a default properties file. A producer application may have more than one producer, each with its own service ID. On registration, if no service ID is defined, then the default properties file is used.

9. Select Generate XML Entries.
This automatically generates a producer definition file (provider.xml) for the producer that contains details of the portlets belonging to the producer, including those generated by the wizard.

10. Select Generate Index JSP.
This automatically generates an index.jsp file that lists all the producers that reside in the application with hyperlinks that enable easy access to producer test pages.

11. Click Next to display the General Portlet Information Page.

Figure 6-24 General Portlet Information Page

12. In the Portlet Name field, enter a meaningful name for your portlet. This name is used internally and is not exposed to users. The display name is displayed to users in portlet selection lists, such as the Component Palette.

13. In the Display Name field, enter a display name for your portlet. This name will be displayed in portlet selection lists, such as the Portlet Repository, where users choose which portlets to add to a page.

14. In the Description field, enter a description for your portlet. This description will be displayed beneath the portlet name in the Portlet Repository.

15. In the Timeout field, enter the number of seconds to allow for rendering the portlet.

16. In the Timeout Message field, enter a message to display if the rendering of the portlet exceeds the timeout value specified.

17. Click Next to display the View Modes page (Figure 6-25).

Figure 6-25 View Modes Page

18. In the Show page section, select the implementation style for Shared Screen mode from the Implementation style list:

- Select JSP to implement the portlet's Shared Screen mode as a JavaServer Page. In the File name field, enter the name of the file to be generated by the wizard.

- Select HTTP Servlet to implement the portlet's Shared Screen mode as an HTTP servlet. In the Package name field, enter the name of the package that contains the HTTP servlet. In the Class name field, enter the Java class to be referenced in conjunction with the portlet's Shared Screen mode.

- Select HTML File to implement the portlet's Shared Screen mode as an HTML file. In the File name field, enter the name of the file to be generated by the wizard. Note that, when you choose HTML File, it results in the following being added inside the <renderer> element of your provider.xml file:

<showPage class="oracle.portal.provider.v2.render.http.ResourceRenderer">
<resourcePath>/hub_inside/index.html</resourcePath>
<contentType>text/html</contentType>
<charSet>UTF-8</charSet>
</showPage>

<charSet> tells the provider what character set to use to encode the HTML page. The default character set specified by the wizard is UTF-8. If you require character set encoding other than UTF-8, you must update this element of provider.xml accordingly.

- Select Java class to implement the portlet's Shared Screen mode as a Java class. In the Package name field, enter the name of the package that contains the Java class. In the Class name field, enter the name of the Java class.

For more information about Shared Screen mode, see Section 6.1.1.1, "Shared Screen Mode (View Mode for JPS)."

19. If you want to implement Full Screen mode for your portlet, select Show details page, then select an Implementation style as described earlier for Show page.
For more information about Full Screen mode, see Section 6.1.1.5, "Full Screen Mode (PDK-Java)."

20. Click Next to display the Customize Modes page (Figure 6-26)

Figure 6-26 Customize Modes Page

21. Edit page is selected by default. If you want to implement Edit mode for your portlet, select an Implementation style as described earlier for Show page. If you do not want to implement Edit mode, clear the Edit page check box.
For more information about Edit mode, see Section 6.1.1.2, "Edit Mode (JPS and Pdk-Java)."

22. If you want to implement Edit Defaults mode for your portlet, select Edit Defaults page, then select an Implementation style as described earlier for Show page.
For more information about Edit Defaults mode, see Section 6.1.1.3, "Edit Defaults Mode (JPS and PDK-Java)."

23. Click Next to display the Additional Modes page (Figure 6-27).

Figure 6-27 Additional Modes Page

24. If you want to implement Help mode for your portlet, select Help page, then select an Implementation style as described earlier for Show page.
For more information about Help mode, see Section 6.1.1.6, "Help Mode (JPS and Oracle Portal)."

25. If you want to implement About mode for your portlet, select About page, then select an Implementation style as described earlier for Show page.
For more information about About mode, see Section 6.1.1.7, "About Mode (JPS and PDK-Java)."

26. Click Next to display the Public Portlet Parameters page (Figure 6-28)

Figure 6-28 Public Portlet Parameters Page

27. If you want to add public parameters to your portlet, click Add to create a blank row. For more information about using parameters, see Section 7.2.3, "Passing Parameters and Submitting Events."

28. In the Name field, enter an internal name for the parameter, for example, MyParam.

29. In the Display Name field, enter a name to display to users, for example, My Portlet Parameter.

30. In the Description field, enter descriptive information about the parameter.

31. Click Next to display the Public Portlet Events page (Figure 6-29).

Figure 6-29 Public Portlet Events Page

32. On this page you can map parameters to events. For more information about using events, see Section 7.2.3, "Passing Parameters and Submitting Events."

33. Click Finish to generate the files for your portlet. The following files should be generated for your project in the Application Navigator (see Figure 6-30):

- Files for each portlet mode you selected

- provider.xml

- web.xml

- index.jsp

- _default.properties

- <serviceID>.properties

All these files are required to deploy and run the portlet successfully, except for index.jsp, which is used by Oracle JDeveloper for testing purposes.

Figure 6-30 Application Navigator

6.5.2 Adding Portlet Logic to Your Oracle PDK-Java Portlet

After you create the default implementation of your portlet, you can extend the sample code with your own business logic to implement the desired functionality and features. See the JPS or Javadoc for more information on adding functionality and features.

6.5.3 Validating Your Oracle PDK-Java Portlet and Provider

After you have built your portlet, you need to check the configuration to ensure that the portlet and its provider operate correctly.

Note:

This procedure is for testing purposes only. After this procedure, you still need to register your provider as described in Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet". For development and production, you should always deploy your portlet to an application server as described in Section 6.5.4, "Deploying Your Oracle PDK-Java Portlet to an Application Server".

To validate your portlet and provider:

1. In Oracle JDeveloper, open the project you created in the previous sections.

2. In the Application Navigator, right-click the index.jsp file for you portlet and select Run.
Your browser opens a page similar to the one shown in Figure 6-31.

Figure 6-31 Portlet Application Test Page

3. Click the link underneath Service Name.
Your browser opens with a page similar to the one shown in Figure 6-32. Note that you need the URL from this page to register your provider, which is the next task.

Figure 6-32 Provider Test Page

6.5.4 Deploying Your Oracle PDK-Java Portlet to an Application Server

After you finish the wizard and successfully generate your portlet, you are ready to deploy it to the Oracle WebLogic Server (WLS). The following sections describe how to deploy an Oracle PDK-Java portlet to WLS.

To create and deploy the WAR file:

1. In the Application Navigator, right-click the project that contains your portlet and select New.

2. In the New Gallery, expand the General category and select Deployment Profiles.

3. In the Items list, select WAR File and click OK. The Create Deployment Profile -- WAR File dialog box opens.

4. In the Deployment Profile Name field, enter a meaningful name for the deployment profile (for example, myj2eeportlet).

5. Click OK. The WAR Deployment Profile Properties dialog box opens.

6. Under Web Application's Context Root, select Specify Java EE Web Context Root and enter the context root in the corresponding field, for example myj2eeportlet1.

7. Select the Contributors node under WEB-INF/lib.

8. Select Portlet Development.

9. Click OK. The Project Properties dialog opens.

10. Click OK.

11. In the Application Navigator, right-click your project and select Deploy, then select the deployment profile, next select to, and finally select the application server connection to which you want to deploy the portlet.

12. When the Deployment Finished message displays in the Deployment Log at the bottom of Oracle JDeveloper, verify that no errors occurred.

13. Construct the URL for your portlet as follows:

http://host:port/context-root/providers

where host is the server to which your provider has been deployed.

port is the Oracle Web Cache HTTP Listener port from the Ports tab of the Application Server Control Console main page.

context-root is the Web Application's Context Root, which is found in the WAR Deployment Profile Properties under General.

14. In a Web browser, enter the URL from the previous step to ensure that it is working. You should see a page similar to the one in Figure 6-33.

Figure 6-33 PDK - Java Test Page for Portlets

6.5.5 Registering and Viewing Your Oracle PDK-Java Portlet

After you've created and deployed the provider and its portlets, you should register the provider with Oracle Portal. Registering your provider gives Oracle Portal the information it needs to locate and communicate with that provider. After you register a provider, the provider and its portlets become available in the Portlet Repository. They are also listed in the Oracle Portal Navigator.

Note:

When you build portlets and providers with built-in tools, such as the Portlet Builder, Oracle Portal automatically registers the provider for you. Once you've created your portlet, it automatically displays in the Portlet Repository. Oracle Portal also offers built-in portlets that are contained in a preconfigured provider. For example, OmniPortlet and Web Clipping are portlets that you can use out of the box, and are already registered with Oracle Portal. You can view these portlets in the Add Portlets list. However, if you build the portlets and providers programmatically, you must then register these providers in order to make them available to the portal user.

To register providers for your Oracle PDK-Java portlets:

1. Open Oracle Portal and log in. Note that to register your provider, you need to have Manage or Edit privileges on providers. If you do not have these privileges, you need to request them from your administrator.

2. If you are not already on the Portal Builder page, click the Builder link in the upper right corner.

3. Click the Administer tab.

4. Click the Portlets sub tab.

5. In the Remote Providers portlet, click Register a Provider to display the Register Provider page.

6. In the Name field, enter the name of the provider. The name must not be more than 200 characters or contain spaces or other special characters.

7. In the Display Name field, enter a name to display for the provider when it is referenced, for example in the Portlet Repository. The display name must not be more than 200 characters.

8. In the Timeout field, enter the number of seconds Oracle Portal should try to connect to the provider before displaying the timeout message.

9. In the Timeout Message field, enter the message to display when Oracle Portal cannot establish contact with the provider within the number of seconds specified in the Timeout field. The message displays within the body of the portlet. The message may not contain HTML or mobileXML.

10. From the Implementation Style list, select Web.

11. Click Next to display the Define Connection page (Figure 6-34)

Figure 6-34 Define Connection Page

12. In the URL field, enter the URL for your provider. This URL is the one that you created at the end of Section 6.5.4, "Deploying Your Oracle PDK-Java Portlet to an Application Server."

13. In the Service ID field, enter the service ID for your provider.

Note:

PDK-Java enables you to deploy multiple providers under a single adapter servlet. The providers are identified by the Service ID field. When you deploy a new provider, you must assign a service identifier to the provider and use that service identifier when creating your provider WAR file. The service identifier is used to look up a file called service_id.properties, which defines the characteristics of the provider, such as whether to display its test page.
For more information about service identifiers, refer to Section D.1.2, "Service Identifiers".

To access a sample provider test page, you must use the URL and service ID. An example of a URL for a sample provider is as follows:

http://myserver.com:8888/myj2eeportlet1/providers/sample

where, http://myserver.com:8888/myj2eeportlet1/providers is the URL value, and sample is the service ID.

14. Click Finish. You should see a Registration Confirmation page.

15. Your portlet should now be available for adding to pages just as any other portlet in the Portlet Repository. To add your portlet to a page, follow the instructions in the Oracle Fusion Middleware User's Guide for Oracle Portal.

6.6 Setting up the WSRP and JPDK Applications in Oracle Portal

This section describes steps to manually configure the WSRP and JPDK application and deploying them on the Oracle WebLogic Server.

This section includes the following subsections:

- Configuring and Deploying the WSRP

- Configuring and Deploying the JPDK

6.6.1 Configuring and Deploying the WSRP

To configure the WSRP, complete the following steps:

- Creating WSRP Managed Server

- Adding the Required Libraries to the WSRP Managed Server

- Starting the WSRP Managed Server

- Configuring the Datasource

- Extending the Existing WebLogic Domain

- Adding wsm-pm to the WSRP Managed Server

- Deploying the Sample EAR File

- Configuring Oracle Web Cache

- Registering and Viewing Your Portlet

Creating WSRP Managed Server

You can create a WebLogic Managed Server on an existing domain using the Oracle WebLogic Server Administration Console to create the managed server instance and provision the shared libraries required to run a custom Oracle Portal application. To create the WSRP Managed Server, complete the following steps:

1. Log on to the Oracle WebLogic Server Administration Console.

2. If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit.

3. In the Domain Structure tree, expand Environment, and then select Servers.
The Summary of Servers page is displayed.

4. Click New.
The Create a New Server page is displayed.

5. In the Create a New Server page enter the following information:

- Server Name: Enter the name of the server, for example WLS_WSRP.

- Server Listen Port: Enter the port number from which you want to access the server instance. For example, 9003.

- Select the No, this is a stand-alone server radio button.

6. Click Finish.

7. In the Summary of Servers page, click on the Server (WLS_WSRP) you have created.

8. Select your machine name from the Machine drop-down list and click Save.

9. Click Activate Changes.

Adding the Required Libraries to the WSRP Managed Server

For a portlet producer application, you must deploy the following libraries to the new Managed Server or cluster:

- oracle.portlet-producer.wsrp(11.1.1,11.1.1)

- oracle.portlet-producer.jpdk(11.1.1,11.1.1)

- DMS Application (11.1.1.1.0)

- oracle.jrf.system.filter

- oracle.jsp.next(11.1.1,11.1.1)

- oracle.wsm.seedpolicies(11.1.1,11.1.1)

- wsil-wls

To add the libraries, complete the following steps:

1. Click Lock & Edit.

2. In the Domain Structure tree, select Deployments.
The Summary of Deployments page is displayed.

3. Select oracle.portlet-producer.wsrp(11.1.1,11.1.1) from the Deployments table.
The Settings for oracle.portlet-producer.wsrp(11.1.1,11.1.1) page is displayed.

Note:

If the oracle.portlet-producer.wsrp(11.1.1,11.1.1) does not appear in the Deployment table, then click Customize this table, and disable the Exclude libraries when displaying deployments check box. Click Apply.

4. Click the Targets tab, and select AdminServer and WLS_WSRP from the Servers section.

5. Click Save.

6. Go to your Summary of Deployments page, and for each shared library, click the Targets tab, and then check AdminServer and WLS_WSRP from the Servers section.

7. To add the wsil-wls library, complete the following steps:

1. Select wsil-wls from the Deployments table.

2. Click the Targets tab, and select wsil-wls from the Component table.

3. Click Change Targets, and then check AdminServer and WLS_WSRP from the Servers section.

4. Click Yes.

8. Click Activate Changes.

Starting the WSRP Managed Server

To start the managed server, complete the following steps:

1. Click Lock & Edit.

2. In the Domain Structure tree, expand Environment, and then select Servers.
The Summary of Servers page is displayed.

3. Click the Control tab, and check your created server (WLS_WSRP).

4. Click Start.
The Server Life Cycle Assistant page is displayed.

5. Click Yes, to start the managed server.

Configuring the Datasource

To map the portletPrefs datasource targets to the managed server (WLS_WSRP), do the following:

1. In the Domain Structure tree, expand Services, and then select and expand JDBC and click Data Sources.
The Summary of JDBC Data Sources page is displayed.

2. Click the Name associated with the jdbc/portletPrefs JNDI.

3. Click the Targets tab, and check WLS_WSRP from the Servers section.

4. Click Save.

5. Click Activate Changes.

Extending the Existing WebLogic Domain

To extend your existing Oracle WebLogic Server domain with the Oracle WSM Policy Manager, complete the following steps:

Note:

You must stop all the servers running in the Oracle Portal domain.

1. Select Extend an existing WebLogic Domain and click Next.
The Select a WebLogic Domain Directory screen is displayed.

2. Select your valid domain directory and click Next.
The Select Extension Source screen is displayed.

3. Select Oracle WSM Policy Manager - 11.1.1.0 [Oracle_Common] (Select the one associated with your Oracle Portal) check box from the Extend my domain automatically to support the following added products option and click Next.
The Configure JDBC Data Sources screen is displayed.

4. Click Next.
The Test JDBC Data Sources screen is displayed.

5. Click Next.
The Configure JDBC Component Schema screen is displayed.

6. Check the OWSM MDS Schema and enter the Host Name, Port, DBMS/ Service, Schema Password for the MDS schema. Click Next.

Note:

This is the schema created for MDS when you run the Repository Configuration Utility (RCU) at install time. If you did not created this schema already then you need to create this schema first using RCU.

The Test Component Schema screen is displayed.

7. Confirm the test is successful and click Next.
The Select Optional Configuration screen is displayed.

8. Select Deployments and Services.

9. Click Next.
The Target Deployments to Clusters or Servers screen is displayed.

10. Ensure wsrp-pm is targeted to servers including WLS_WSRP and AdminServer.

11. Click Next.
The Target Services to Cluster or Servers screen is displayed

12. Click Next.

13. Review your settings in the Configuration Summary screen, and click Extend.

14. Click Done.

Start the Oracle WebLogic Administration Server, the managed server, and the WLS_WSRP managed server.

Adding wsm-pm to the WSRP Managed Server

You must add the wsm-pm to the WLS_WSRP managed server, by completing the following steps:

1. If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit.

2. In the Domain Structure tree, select Deployments.
The Summary of Deployments page is displayed.

3. Select wsm-pm from the Deployments table.

4. Click the Targets tab, and select wsm-pm from the Component table.

5. Click Change Targets, and then check AdminServer and WLS_WSRP from the Servers section.

6. Click Yes.

Deploying the Sample EAR File

To deploy the EAR file, download the wsrp-samples.ear file, from Download the Oracle Portlet Container at http://www.oracle.com/technology/products/ias/portal/pdk.html and do the following:

1. Click Lock & Edit.

2. In the Domain Structure tree, select Deployments.
The Summary of Deployments page is displayed.

3. Click Install.

4. Select wsrp-samples.ear from your directory, click Next.

5. Select Install this deployment as an application, and click Next.

6. Check WLS_WSRP from the Servers section, and click Next.

7. Enter a name for the deployment, and click Finish.

8. Click Activate Changes.

9. In the Summary of Deployments page, select the application you have deployed, and then click Start.

10. Now that you have deployed the sample EAR file, you need to test its WSDL URL by entering it into a browser. The WSDL URL is of the form:

http://host:port/portletapp/portlets?WSDL

You should see a page similar to the one shown in Example 6-1.

Example 6-1 WSRP Producer WSDL Page

<?xml version="1.0" encoding="UTF-8" ?>
<definitions targetNamespace="urn:oasis:names:tc:wsrp:v1:wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:bind="urn:oasis:names:tc:wsrp:v1:bind">
<import namespace="urn:oasis:names:tc:wsrp:v1:bind"
location="http://stamf10.us.abc.com:8090/wsrp-tools/portlets/wsrp1?WSDL=wsrp_v1_bindings.wsdl" />
<service name="WSRP_v1_Service">
<port name="WSRPServiceDescriptionService"
binding="bind:WSRP_v1_ServiceDescription_Binding_SOAP">
<soap:address location="http://stamf10.us.oracle.com:8090/wsrp-tools/portlets/WSRPServiceDescriptionService" />
</port>
<port name="WSRPBaseService" binding="bind:WSRP_v1_Markup_Binding_SOAP">
<soap:address location="http://stamf10.us.oracle.com:8090/wsrp-tools/portlets/WSRPBaseService" />
</port>
<port name="WSRPPortletManagementService"
binding="bind:WSRP_v1_PortletManagement_Binding_SOAP">
<soap:address location="http://stamf10.us.abc.com:8090/wsrp-tools/portlets/WSRPPortletManagementService" />
</port>
<port name="WSRPRegistrationService" binding="bind:WSRP_v1_Registration_Binding_SOAP">
<soap:address location="http://stamf10.us.abc.com:8090/wsrp-tools/portlets/WSRPRegistrationService"/>
</port>
</service>
</definitions>

Configuring Oracle Web Cache

To view the WSDL URL using the Oracle Web Cache port, edit the portal.conf file (Located at ORACLE_INSTANCE\config\OHS\ohs1\moduleconf in Windows) as follows:

<Location /portletapp>
SetHandler weblogic-handler
WebLogicHost servername.domain.com
WebLogicPort 9003
</Location>

Save your file and restart the Oracle HTTP Server. Now you can access the WSDL URL through the Oracle Portal port (The default port is 8090).

Registering and Viewing Your Portlet

After you've created and deployed the provider and its portlets, you should register the provider with Oracle Portal. For more information, see Registering and Viewing Your JSR 168 Portlet in the "Oracle Fusion Middleware Developer's Guide for Oracle Portal."

6.6.2 Configuring and Deploying the JPDK

To configure and deploying the JPDK, perform the following:

- Creating the JPDK Managed Server

- Adding the Required Libraries to the JPDK Managed Server

- Starting the JPDK Managed Server

- Configuring the Datasource

- Deploying the EAR File

- Configuring Oracle Web Cache

- Registering and Viewing Your Portlet

Creating the JPDK Managed Server

You can create a WebLogic Managed Server on an existing domain using the Oracle WebLogic Server Administration Console to create the managed server instance and provision the shared libraries required to run a custom Oracle Portal application. To create the JPDK Managed Server, do the following:

1. Log on to the WebLogic Server Administration Console.

2. If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit.

3. In the Domain Structure tree, expand Environment and then select Servers.
The Summary of Servers page is displayed.

4. Click New.
The Create a New Server page is displayed.

5. In the Create a New Server page enter the following information:

- Server Name: Enter the name of the server. For this step use WLS_JPDK as an example.

- Server Listen Port: Enter the port number from which you want to access the server instance. For this step use 9004 as an example.

- Select the No, this is a stand-alone server radio button.

6. Click Finish.

7. In the Summary of Servers page, click on the Server (WLS_JPDK) you have created.

8. Select your machine name from the Machine drop-down list and click Save.

9. Click Activate Changes.

Adding the Required Libraries to the JPDK Managed Server

For a portlet producer application, you must deploy the following libraries to the new Managed Server or cluster:

- oracle.portlet-producer.jpdk(11.1.1,11.1.1)

- DMS Application (11.1.1.1.0)

- oracle.jsp.next(11.1.1,11.1.1)

To add the libraries, do the following:

1. Click Lock & Edit.

2. In the Domain Structure tree, select Deployments.
The Summary of Deployments page is displayed.

3. Select oracle.portlet-producer.jpdk(11.1.1,11.1.1) from the Deployments table.
The Settings for oracle.portlet-producer.jpdk(11.1.1,11.1.1) page is displayed.

Note:

If the oracle.portlet-producer.jpdk(11.1.1,11.1.1) does not appear in the Deployment table, then click Customize this table, and disable the Exclude libraries when displaying deployments check box. Click Apply.

4. Click the Targets tab, and select AdminServer and WLS_JPDK from the Servers section.

5. Click Save.

6. Go to your Summary of Deployments page, and for each shared library, click the Targets tab, and then check AdminServer and WLS_JPDK from the Servers section.

7. Click Activate Changes.

Starting the JPDK Managed Server

To start the managed server do the following:

1. Click Lock & Edit.

2. In the Domain Structure tree, expand Environment and then select Servers.
The Summary of Servers page is displayed.

3. Click the Control tab, and select your created server (WLS_JPDK).

4. Click Start.
The Server Life Cycle Assistant page is displayed.

5. Click Yes, to start the managed server.

Configuring the Datasource

To map the portletPrefs datasource targets to the managed server (WLS_JPDK), do the following:

1. In the Domain Structure tree, expand Services, and then select and expand JDBC and click Data Sources.
The Summary of JDBC Data Sources page is displayed.

2. Click the Name associated with the jdbc/portletPrefs JNDI.

3. Click the Targets tab, and check WLS_JPDK from the Servers section.

4. Click Save.

5. Click Activate Changes.

Deploying the EAR File

To deploy the JPDk, do the following:

1. Click Lock & Edit.

2. In the Domain Structure tree, select Deployments.
The Summary of Deployments page is displayed.

3. Click Install.
The Install Application Assistant page is displayed.

4. In the Path field, enter the location of the jpdk.ear file (Located at ORACLE_HOME/archives/applications for Windows and ORACLE_HOME\archives\applications for UNIX).

5. Select jpdk.ear, and click Next.

6. Select Install this deployment as an application, and click Next.

7. Check WLS_JPDK from the Servers section, and click Next.

8. In the Name field, enter a name for the deployment.

9. Click Finish.

10. Click Activate Changes.

11. Click Lock & Edit.

12. From the Summary of Deployments page, select the application and click Start and then, Servicing all requests.

13. From the Start Application Assistant, click Yes.

14. Now that you have deployed the sample EAR file, you need to test its URL by entering it into a browser. The URL is of the form:

http://host:port/jpdk/providers/sample/

For more information, see Creating Java Portlets in the Oracle Fusion Middleware Developer's Guide for Oracle Portal.

Configuring Oracle Web Cache

To view the JPDK sample URL using the Oracle Web Cache port, edit the portal.conf file (Located at ORACLE_INSTANCE\config\OHS\ohs1\moduleconf in Windows) as follows:

<Location /jpdk>
SetHandler weblogic-handler
WebLogicHost servername.domain.com
WebLogicPort 9004
</Location>

Save your file and restart the Oracle HTTP Server. Now you can access the WSDL URL through the Oracle Portal port (The default port is 8090).

Registering and Viewing Your Portlet

After you've created and deployed the provider and its portlets, you should register the provider with Oracle Portal. For more information, see "Registering and Viewing Your Oracle PDK-Java Portlet" section in the Oracle Fusion Middleware Developer's Guide for Oracle Portal.

Footnote Legend
Footnote 1: The Java Portlet Specification 1.0 arose from Java Specification Request 168 and the JSR168 Expert Group.

The script content on this page is for navigation purposes only and does not alter the content in any way.

7 Enhancing Java Portlets

This chapter explains how to enhance Java portlets you created with the Oracle JDeveloper Portal Add-In, and how to make a portlet out of your struts application. This chapter contains the following sections:

- Section 7.1, "Enhancing JPS Portlets"

- Section 7.2, "Enhancing PDK-Java Portlets"

- Section 7.3, "Building Struts Portlets with Oracle JDeveloper"

The source code for many of the examples referenced in this chapter is available as part of PDK-Java. You can download PDK-Java on Oracle Technology Network (OTN):

http://www.oracle.com/technology/products/webcenter/index.html

When you unzip PDK-Java, you will find the examples in:

../pdk/jpdk/v2/src/oracle/portal/sample/v2/devguide

You can find the Javadoc reference for PDK-Java in:

../pdk/jpdk/v2/apidoc

7.1 Enhancing JPS Portlets

Once you have built your initial portlet in the Portlet Wizard as described in Section 6.3.1, "Creating a JSR 168 Portlet", you will want to enhance it. Because JPS portlets adhere to the Java standards, you can find substantial information about enhancing them from many different sources, such as third party books and Web pages. One of the more important enhancements that you might wish to perform is Section 7.1.1, "Adding Personalization", which is described in this section.

7.1.1 Adding Personalization

In this section, you enhance the portlet you created in Section 6.3.1, "Creating a JSR 168 Portlet" with some code that allows a user in Edit or Edit Defaults mode to paste HTML into a field for the portlet to render. You will also see how easily you can redeploy a portlet.

7.1.1.1 Assumptions

To perform the tasks in this section, we are making the following assumption:

- You built a portlet using the wizard, successfully registered the producer, and added the portlet to the page.

7.1.1.2 Implementing Personalization

In this section, you add some code to My Java Portlet, redeploy the portlet, and then test it in Oracle Portal. To do this, perform the following steps:

1. In Oracle JDeveloper, double-click the view.jsp file for your JPS-Standard portlet in the Application Navigator.

2. Add the code that is indicated in bold in the following snippet:

<%@ page contentType="text/html"
import="javax.portlet.*,java.util.*,mypackage1.Portlet1,
mypackage1.resource.Portlet1Bundle"%>"
<%@ taglib uri="http://java.sun.com/portlet" prefix="portlet"%>
<portlet:defineObjects/>
<%
PortletPreferences prefs = renderRequest.getPreferences();
%>
<%= prefs.getValue("portletContent", "Portlet Content") %>

3. Open edit.jsp in the visual designer and click the Design tab. Notice that the JSP consists of a form field, a form input field, and two form button fields, as shown in Figure 7-1.

Figure 7-1 edit.jsp in the Design View

4. Add the code that is indicated in bold in the following snippet to implement a form field called Content:

<FORM ACTION="<portlet:actionURL/>" METHOD="POST">
<TABLE BORDER="0">
<TR><TD WIDTH="20%">
<P CLASS="portlet-form-field" ALIGN="right">
<%= res.getString(Portlet1Bundle.PORTLETTITLE) %>
</P></TD><TD WIDTH="80%"><INPUT CLASS="portlet-form-input-field" TYPE="TEXT"
NAME="<%= Portlet1.PORTLETTITLE_KEY %>"
VALUE="<%= prefs.getValue(Portlet1.PORTLETTITLE_KEY,
res.getString("javax.portlet.title")) %>"
SIZE="20">
</TD></TR>
<tr><td width="20%">
<p class="portlet-form-field" align="right">
Content
</p>
</td><td width="80%">
</td></tr>
<TR><TD COLSPAN="2" ALIGN="CENTER">
<INPUT CLASS="portlet-form-button" TYPE="SUBMIT" NAME=
"<%= Portlet1.OK_ACTION%>"
VALUE="<%= res.getString(Portlet1Bundle.OK_LABEL) %>">
<INPUT CLASS="portlet-form-button" TYPE="SUBMIT" NAME=
="<%=Portlet1.APPLY_ACTION %>"
VALUE="<%= res.getString(Portlet1Bundle.APPLY_LABEL) %>"></TD></TR>
</TABLE>

5. Click the Design tab to see the new form field that you just added (Figure 7-2).

Figure 7-2 Modified edit.jsp in the Design View

6. Open WelcomePortlet.java in the visual editor and insert the following two lines of code (indicated in bold) in the processAction method:

// Save the preferences.
PortletPreferences prefs = request.getPreferences();
String param = request.getParameter(PORTLETTITLE_KEY);
prefs.setValues(PORTLETTITLE_KEY, buildValueArray(param));
String contentParam = request.getParameter("portletContent");
prefs.setValues("portletContent", buildValueArray(contentParam));
prefs.store();

7. Redeploy the portlet. Notice that Oracle JDeveloper automatically saves and compiles the code before deploying the portlet. Refer to Section 6.3.3, "Deploying Your JSR 168 Portlet to the Oracle WebLogic Server" for a reminder of how to perform this step.

8. In Oracle Portal, reload the page that contains the portlet. The portlet displays the text Portlet Content, which was one of the changes you made in Oracle JDeveloper.

9. Click the Customize link. You can see the new form field that you added in Oracle JDeveloper.

10. Enter the following HTML in the Content field, replacing the words Portlet Content.

11. <p>Read <em>The Path to Portlet Interoperability</em> by John Edwards in
<strong>Oracle Magazine</strong>, Nov-Dec 2003. </p>
<p>It discusses JSR 168 and WSRP open portals. </p>

12. Click Apply and then click Close. The HTML is rendered in the portlet.

7.2 Enhancing PDK-Java Portlets

Once you have built your initial portlet in the Portlet Wizard as described in Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper", you may perform the following tasks to enhance it:

- Section 7.2.1, "Adding Show Modes"

- Section 7.2.2, "Adding Personalization"

- Section 7.2.3, "Passing Parameters and Submitting Events"

- Section 7.2.4, "Using JNDI Variables"

- Section 7.2.6, "Accessing Session Information"

- Section 7.2.7, "Implementing Portlet Security"

- Section 7.2.8, "Controlling the Export/Import of Portlet Personalizations"

- Section 7.2.9, "Enhancing Portlet Performance with Caching"

- Section 7.2.11, "Writing Multilingual Portlets"

This section assumes the following:

- You are familiar with portlet terminology such as portlet Show modes. Refer to Chapter 1, "Understanding Portlets" and Section 6.1, "Guidelines for Writing Java Portlets".

- You have already downloaded and installed the Java Portlet Container.

- You are already familiar with Oracle JDeveloper and know how to build and deploy Java components using it. You can download Oracle JDeveloper from OTN. Visit the Oracle JDeveloper page on OTN:

http://www.oracle.com/technology/products/jdev/index.html

7.2.1 Adding Show Modes

In the Portlet Wizard, you add Show modes by checking boxes on the wizard pages. Refer to Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper" for more information about using the wizard. For each Show mode that you select in the wizard, a basic HelloWorld skeleton is created. If you need to add a Show mode after creating the portlet or you are adding one of the modes (preview or link) not available through the wizard, you can do that manually by updating provider.xml and HTML or JSPs in Oracle JDeveloper. The following sections explain how to add Show modes to a PDK-Java portlet:

- Section 7.2.1.2, "Implementing Extra Show Modes"

- Section 7.2.1.3, "Updating the XML Provider Definition"

- Section 7.2.1.4, "Viewing the Portlet"

Once you have completed this section, you will be able to implement any Show mode using RenderManager because the principles are the same for all modes. For example, even though this section does not describe how to implement the Help mode in detail, you will understand how to do it, as the process is the same as for Preview mode, which is described here.

For more detailed information on the PDK runtime classes used in this section, refer to the Javadoc on OTN by clicking Java Doc API on the Portlet Development page available at

http://www.oracle.com/technology/products/ias/portal/portlet_development_10g1014.html

For more information on the syntax of provider.xml, refer to the provider Javadoc:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

7.2.1.1 Assumptions

To perform the tasks in this section, we are making the following assumption:

- You built a portlet using the wizard, successfully registered the producer, and added the portlet to the page.

7.2.1.2 Implementing Extra Show Modes

Your first task when creating Show modes manually is to create an HTML file or JSP for each mode. For example, if you want to implement Preview mode, you need to create an HTML file to provide preview content.

To create an HTML file to preview content, perform the following steps:

1. In Oracle JDeveloper, open the project that contains your portlets.

2. Under Web Content, htdocs\myportlet, create an HTML page called PreviewPage.html. The content of the file could be something similar to the following:

<p>This is the <i>preview</i> mode of your portlet!</p>

Once you have created the HTML file for previewing content, you are ready to update the XML provider definition.

7.2.1.3 Updating the XML Provider Definition

When you want to expose additional Show modes you must update your XML provider definition as follows:

- Set a boolean flag that indicates to the PDK Framework that a link or icon to that mode should be rendered.

- Point to the HTML file or JSP that you created for that mode.

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

For example, if you want to render Preview mode, perform the following steps:

1. Edit the provider definition file, provider.xml and add the tag to activate Preview mode within the <portlet></portlet> tags:

<showPreview>true</showPreview>

2. Specify the preview page to be the HTML page that you created in Section 7.2.1.2, "Implementing Extra Show Modes":

<previewPage>/htdocs/myportlet/MyPortletPreviewPage.html</previewPage>

3. Save the updates to provider.xml.

4. Redeploy your portlet. Refer to step 11 in Section 6.5.4, "Deploying Your Oracle PDK-Java Portlet to an Application Server.".
When you redeploy, Oracle JDeveloper automatically saves and compiles the code before deploying the portlet.

7.2.1.4 Viewing the Portlet

To view the new Show modes, you must ensure that your updated XML provider definition is re-parsed. To do this, perform the following steps:

1. Copy the HTML file you created in Section 7.2.1.2, "Implementing Extra Show Modes" and provider.xml to the WebLogic Server instance where you plan to deploy the portlet.

2. Refresh the provider.

3. Refresh the portal page containing your portlet.

To view Preview mode, do the following:

1. Edit a page or create a new page and choose Add Portlet.

2. Navigate to the location of your provider in the Portlet Repository (for example, Portlet Staging Area) and find your portlet. Note the magnifying glass icon next to the portlet shown in Figure 7-3

Figure 7-3 Add Portlet Page

3. Click the magnifying glass icon next to the portlet and a preview window similar to the one in Figure 7-4 displays.

Figure 7-4 Preview Window

7.2.2 Adding Personalization

In Section 7.2.1, "Adding Show Modes" you learned how to use the PDK Provider Framework to activate and render additional Show modes that were either not activated when creating the portlet with the wizard or not available through the wizard (such as Link and Preview modes). This section describes the two Personalization modes (Edit and Edit Defaults) in more detail. When selected in the Java Portlet Wizard, Edit page and Edit Defaults page cause the generation of skeleton code for the two Personalization modes. The skeleton code enables you to access the personalization framework with a few lines of code rather than completely hand coding a personalization framework and a data store to hold the values.To add personalization to your portlet, you need to do the following:

- Update the Edit page of your portlet to set and retrieve personalization changes.

- Update the Edit Defaults page of your portlet to set and retrieve personalization changes.

- Update the Show page of your portlets to use the personalization set by the user.

The Edit and Edit Defaults modes allow portlet users to change a set of customizable parameters supported by the portlet, which typically drive the way the portlet is rendered in other modes. For a particular instance of a portlet on an Oracle Portal page, the personalizations made in the Edit and Edit Defaults modes apply only to that instance of the portlet. This is explained as follows:

- Edit mode personalizations are specific to the individual user making the personalizations. This mode is activated by clicking the Personalize link on the portlet header in show mode.

- Edit defaults mode personalizations apply to all users in the same locale who have not yet made specific personalizations to that portlet instance. This mode is generally only available to page designers, and can be activated by following the Edit icon on the page.

When rendering Edit and Edit Defaults modes, a PortletRenderer can carry out either of the following tasks to support the personalization process:

- Render the Edit Form: For each of the portlet's customizable parameters, PortletRenderer uses a PortletPersonalizationManager to retrieve the current value and renders a control in an HTML form so the current value can be edited.

- Handle Edit Form actions: When an OK or Apply button is clicked on the standard edit form header, PortletRenderer uses a PortletPersonalizationManager to store the personalized parameters submitted by the edit form and redirects the browser to the appropriate portal page.

Therefore, the purpose of the PortletPersonalizationManager controller is to enable a PortletRenderer to store and retrieve the current values of customizable parameters that apply to a particular portlet instance and user. The PDK Framework uses the abstraction of a PersonalizationObject as a container for a set of personalized parameters and a PortletReference as the key under which a set of personalizations are stored. Thus, a PortletPersonalizationManager is simply a mechanism that allows the storage and retrieval of persisted PersonalizationObjects under a given PortletReference.

A preference store is a mechanism for storing information like user preference data, portlet/provider settings, or even portlet data, while using Oracle Portal. The information stored in the preference store is persistent in the sense that, even if you log out and log back in later, you can still access previously saved preferences. The preference store maintains the user preference information and invokes the user preferences whenever the user logs in again. PDK-Java provides the PrefStorePersonalizationManager, which uses a PreferenceStore implementation to persist personalized data. Currently, PDK-Java has two PreferenceStore implementations: DBPreferenceStore and FilePreferenceStore. The DBPreferenceStore persists data using a JDBC compatible relational database and FilePreferenceStore persists data using the file system.

For more details of these implementations, refer to the Javadoc on OTN by clicking Java Doc API on the Portlet Development page available at

http://www.oracle.com/technology/products/ias/portal/portlet_development_10g1014.html

Note:

PDK-Java provides the Preference Store Migration/Upgrade Utility to help migrate the preference store from a file system to a database and upgrade personalizations from earlier releases. This utility is described more fully on OTN.

http://www.oracle.com/technology/products/webcenter/index.html

To add personalization functionality to your portlet you use PrefStorePersonalizationManager in conjunction with NameValuePersonalizationObject, that is, the default PersonalizationObject implementation. By default, the wizard generates a simple edit form for both the Edit and Edit Defaults modes to enable users to personalize the portlet title. This section describes how to update the existing code to enable portal users to personalize the portlet greeting.

7.2.2.1 Assumptions

To perform the tasks in this section, we are making the following assumptions:

1. You have followed through and understood the following sections:

- Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper"

- Section 7.2.1, "Adding Show Modes"

2. You built a portlet using the wizard, with Edit page and Edit Defaults page selected, and successfully added it to a page.

7.2.2.2 Implementing Personalization for Edit and Edit Defaults Pages

The Edit page of your portlet is called when a user personalizes the portlet. By default, the JSP generated by the wizard includes all of the required code to provide personalization of the portlet title. You just need to insert a few lines of code into the Edit page for additional personalization.

7.2.2.2.1 Reviewing the Generated Code

The wizard creates the following code for you by default:

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.personalize.NameValuePersonalizationObject"
import="oracle.portal.provider.v2.render.PortletRendererUtil"
%>

<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
%>

<P>Hello <%=pReq.getUser().getName() %>.</P>
<P>This is the <b><i>Edit</i></b> render mode!</P>
<%-- This page both displays the personalization
form and processes it,. Display the form if
there is no action parameter, process it
otherwise --%>

<%
String actionParam = PortletRendererUtil.getEditFormParameter(pReq);
String action = request.getParameter(actionParam);
String title = request.getParameter("my2portlet_title");
NameValuePersonalizationObject data = (NameValuePersonalizationObject)
PortletRendererUtil.getEditData(pReq);
// Cancel automatically redirects to the page, so
// will only receive OK or APPLY
if (action !=null)
{
data.setPortletTitle(title);
PortletRendererUtil.submitEditData(pReq, data);
return;
}

// Otherwise just render the form.
title = data.getPortletTitle();
%>
<table border="0">
<td width="20%">
<p align="right">Title:</p>
</td>
<td width="80%">
<input type="TEXT" name="my2portlet_title" value="<%= title %>">
</td>
</table>

7.2.2.2.2 Modifying the Generated Code

The JSP contains an input field for the portlet title. This field represents the Personalize page of the portlet where users can update the portlet title. To modify the generated code, perform the following steps:

1. Following the table in the generated code, add a second table containing a text field and a prompt, allowing users to enter a new greeting for the portlet:

<table border="0">
<tr>
<td width="20%">
<p align="right">Greeting:</p>
</td>
<td width="80%">
<input type="TEXT" name="myportlet_greeting" value="<%= greeting %>">
</td>
</tr>
</table>

2. This HTML simply specifies a field to enter a new greeting on the Edit page. This new greeting is displayed in the portlet's Shared Screen mode. Next, you add a string below String title that retrieves the value of the greeting:

String title = request.getParameter("my2portlet_title");
String greeting = request.getParameter("myportlet_greeting");

3. Generating an Edit page from the wizard automatically includes access to the personalization framework in the page code. At the top of the Edit page, you see the NameValuePersonalizationObject declared. This form of personalization in Oracle Portal allows easy storage of name/value pairs.
The Edit page handles two cases: viewing the page or applying changes to it. The changes we have made so far affect the code for viewing the page. Applying changes to the Edit page is handled in the block of code beginning with if (action !=null).

In this block of code, you must store the new portlet greeting. You must also account for the case where the user decides to make no changes and you simply retrieve the existing greeting:

if (action !=null)
{
data.setPortletTitle(title);
//Put the new greeting.
data.putString("myportlet_greeting", greeting);
PortletRendererUtil.submitEditData(pReq, data);
return;
}
//Otherwise just render the form.
title = data.getPortletTitle();
//Get the old greeting.
greeting = data.getString("myportlet_greeting");

You are now done updating the Edit page.

You can simply duplicate these changes for the Edit Defaults page. The Edit Defaults page is called when a page designer or portal administrator clicks Edit on the page and then clicks the Edit Defaults icon for the portlet. This page sets the default personalization for this instance of the portlet. Even though the code in the JSP is identical, the PDK Framework and Oracle Portal automatically handle the personalization differently depending on the Show mode (Edit or Edit Defaults).

7.2.2.3 Implementing Personalization for Show Pages

To have access to the personalization data in the portlet's Shared Screen mode, you need to add a few lines of code to the Show page. By adding these lines you perform the following:

- Adding import statements.

- Declaring the NameValuePersonalizationObject.

- Retrieving the personalization data.

To implement personalization of the Show page, perform the following steps:

1. Edit your Show page and import NameValuePersonalizationObject and PortletRendererUtil. You can copy these from the Edit page if necessary.

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.personalize.
NameValuePersonalizationObject"
import="oracle.portal.provider.v2.render.PortletRendererUtil"
%>

2. Declare the NameValuePersonalizationObject and retrieve the edit data from the portlet render request. You can copy this from the portlet's Edit page.

<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
NameValuePersonalizationObject data = (NameValuePersonalizationObject)
PortletRendererUtil.getEditData(pReq);
%>

3. Get the string information from the personalization framework:

<%
String greeting = data.getString("myportlet_greeting");
%>

4. Add some text to the Show page that displays the greeting in the Shared Screen mode of the portlet.

<P>Hello <%= pReq.getUser().getName() %>.</P>
<P>This is the <b><i>show</i>,</b> render mode!</P>
<P>Greeting: <%= greeting %></P>

You have now completed updating the Show page of the portlet.

7.2.2.4 Preference Information Within the XML Provider Definition

The Portlet Wizard generates all of the necessary tags for accessing the PreferenceStore in the XML provider definition file (provider.xml). By default, at the provider level, the wizard uses the FilePreferenceStore class to store preferences:

<provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
<session>false</session>
<passAllUrlParams>false</passAllUrlParams>
<preferenceStore class="oracle.portal.provider.v2.preference.FilePreferenceStore">
<name>prefStore1</name>
<useHashing>true</useHashing>
</preferenceStore>

At the portlet level, tags are added to use PrefStorePersonalizationManager as the personalizationManager class and NameValuePersonalizationObject as the data class:

<personalizationManager class="oracle.portal.provider.v2.personalize.
PrefStorePersonalizationManager">
<dataClass>oracle.portal.provider.v2.NewValuePersonalizationObject</dataClass>
</personalizationManager>

You need not make any changes or updates to the XML Provider Definition if you choose to continue to use the FilePreferenceStore class. However, if you have a global environment for Oracle Portal (for example, you are running in a load balanced, multi-node cluster of Oracle Containers for Java EE instances) or would prefer to store preferences in the database, you can change the class from FilePreferenceStore to DBPreferenceStore.

For more information on using DBPreferenceStore, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

7.2.2.5 Viewing the Portlet

To view the personalization changes you made in the preceding sections, you need to deploy the portlet to your application server or Oracle Containers for Java EE and refresh the page containing your portlet. For more information on deploying your portlet, refer to Section 6.5.4, "Deploying Your Oracle PDK-Java Portlet to an Application Server".

You should now see that the portlet contains a null greeting. Click Personalize in the portlet title bar and update the greeting. When you return to the page, you should see your changes.

You can also test Edit Defaults by clicking Edit on the page and then clicking the Edit Defaults icon. Since you have already modified the portlet, the changes will not appear to you in Shared Screen mode unless you view the page as a public user or a different user.

7.2.3 Passing Parameters and Submitting Events

Oracle Portal and the PDK provide page parameters, public and private portlet parameters, and events to enable portlet developers to easily write reusable, complex portlets. The Portlet Wizard in Oracle JDeveloper creates portlets that are already set up to use parameters and events. This feature enables you to focus solely on adding business logic to your portlets and does not require any changes to provider.xml.

For an overview of parameters and events, refer to the following:

- Section 2.12, "Public Portlet Parameters Support"

- Section 2.13, "Private Portlet Parameter Support"

- Section 2.14, "Event Support"

7.2.3.1 Assumptions

To perform the tasks in this section, the following assumptions are made:

1. You have followed through and understood Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

2. You built a portlet using the wizard and successfully added it to a page.

Note:

Each portlet is limited to 4K of data. The lengths of parameter and event names, display names, and descriptions all contribute toward this 4K limit. Hence, you should not use an excessive number of parameters and events for each portlet, or give them lengthy names and descriptions.

7.2.3.2 Adding Public Parameters

Using the wizard in Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper", you built a basic portlet and specified a parameter called MyParam. If you did not create a parameter, you can create a new portlet now by right clicking on provider.xml in the Applications - Navigator of Oracle JDeveloper, selecting Add Portlet, and following the steps in Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

By default, the wizard creates a portlet to which you can easily map page parameters without updating any code or files. In this section, you will use the default parameter created for you by the wizard.

To use the default parameter, you need only register the provider and add the portlet to a page. After that, you perform the following tasks:

- Create a page parameter.

- Wire the page parameter to your Java portlet.

- Enter parameter values in the URL or another portlet that passes this page parameter.

To add parameters to your portlet:

1. Go to the Parameter tab of the page properties. Note that parameters should be enabled by default, but, if not, you must enable them before proceeding.

2. Create a page parameter called MyParameter with a default value of My Default Value.

3. Expand your Java portlet and map the page parameter you just created to the portlet parameter. The portlet's parameter should map to the page parameter called MyParameter.

4. Go back to the page. Notice that, in the portlet, a value of My Default Value appears.

5. View the page and enter the parameter and a value at the end of the URL:

&MyParameter=This%20portlet%20works

Figure 7-5 shows an example of a parameter portlet.

Figure 7-5 Parameter Portlet

If you have a portlet, such as the Simple Parameter Form included with OmniPortlet, that can pass parameters, you can map parameters from that portlet to your Java portlet using the Events tab.

If you now take a look at the code and tags generated by the wizard, you see that very little code was needed to enable parameters in the Java portlet.

Review provider.xml. Note that the wizard added one tag group called inputParameter, which includes the name of the parameter for which the portlet listens.

<inputParameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>MyParam</name>
<displayName>My Portlet Parameter</displayName>
</inputParameter>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

The wizard also generated code in the JSP for your Show page that receives this parameter, and displays the parameter name and its value.

<%
ParameterDefinition params[] =
pReq.GetPortletDefinition().getInputParameters();
%>

<p>This portlets input parameters are ...</p>
<table align="left" width="50%"><tr><td><span class="PortletHeading1">Value
</span></td></tr>
<%
String name = null;
String value = null;
String[] values = null;
for (int i = 0; i < params.length; i++)
{
name = params[i].getName();
values = pReq.getParameterValues(name);
if (values != null)
{
StringBuffer temp = new StringBuffer();
for (int j = 0; j < params.length; j++)
{
temp.append(values[j]);
if (j + 1 != values.length)
{
temp.append(", ");
}
}
value = temp.toString();
}
else
{
value = "No values submitted yet.";
}
%>
<tr>
<td><span class="PortletText2" <%= name %></span></td>
<td><span class="PortletText2" <%= value %></span></td>
</tr>
<%
}
%>
</table>

7.2.3.3 Passing Private Portlet Parameters

Parameters that are used within a single portlet are known as private parameters. They are visible to a single portlet instance only. Portlet parameters are created and accessed using PDK-Java APIs described in this section. Parameter names are qualified so that it will be correctly handled by the portlet consumer. The following API will do this:

HttpPortletRendererUtil.portletParameter(HttpServletRequest request, String param);

HttpPortletRendererUtil is in the package oracle.portal.provider.v2.render.http.

For example:

qualParamQ = HttpPortletRendererUtil.portletParameter(r, "q");

To fetch the value of a portlet parameter from the incoming request, you can use the following API:

Note:

The API converts the parameter name into the qualified parameter name before fetching the value from the incoming request. Hence, you need not perform this step.

PortletRenderRequest.getQualifiedParameter(String name);

PortletRenderRequest is in the package oracle.portal.provider.v2.render.

For example:

valueQ = r.getQualifiedParameter("q");

The utilities for using private parameters are discussed in Section 7.2.3.3.2, "Building Links with the Portlet URL Types" and Section 7.2.3.3.3, "Building Forms with the Portlet URL Types."

7.2.3.3.1 Portlet URL Types

Intraportlet links refer to the Oracle Portal page on which the portlet resides, and that portlet is most likely running remotely from Oracle Portal. Hence, you must consider how the portlet can render a link to the correct page without some knowledge of the Oracle Portal page's URL. For more information about the types of links used by portlets, refer to Section 6.1.2, "Guidelines for Navigation within a Portlet".

When Oracle Portal requests that a portlet render itself, Oracle Portal passes it various URLs, which the portlet can then use to render links, including any intraportlet links it requires. You can fetch and manipulate these URLs to simplify the task of creating links among portlets and pages in Oracle Portal.

Oracle Portal provides the following URLs to its portlets:

- PAGE_LINK is a URL to the page upon which the portlet instance resides. You use this URL as the basis for all intraportlet links. If the portlet renders a link that navigates the user to another section of the same portlet, then this navigation must be encoded as a set of parameters using the PAGE_LINK. This URL is useful to both desktop and mobile portlets.

- DESIGN_LINK is a URL to an Oracle Portal page that represents the portlet's personalization page. In Oracle Portal, a portlet's Edit and Customize modes are not rendered on the same page as the portlet. The Edit and Customize modes take over the entire browser window. Oracle Portal's portlet edit/customize page is not accessible to every user. It represents a minimal, static framework in which the portlet is free to render its personalization or edit options. This URL is only of use when rendering edit and customize links, which themselves are only supported in desktop clients.

- LOGIN_LINK is a URL to OracleAS Single Sign-On Server, should the portlet need to prompt the user (if PUBLIC) to login. This link is rarely used and only applicable to the desktop rendering of portlets.

- BACK_LINK is a URL to a page that Oracle Portal considers a useful return point from the current page where the portlet renders itself. For example, when the portlet is rendering it's Edit page, this link refers to the page on which the portlet resides and from which the user navigated to the Edit page. Consequently, it is the link you would encode in the buttons that accept or cancel the pending action. This URL is only useful for the desktop rendering of portlets (usually in Edit or Customize mode). Mobile portlets render a Back link automatically leaving the portlet to render just it's own content.

- EVENT_LINK is a URL that raises an event rather than explicitly navigate to some page. This link points to the Oracle Portal entry point to the event manager. This URL is useful to both desktop and mobile portlets.

7.2.3.3.2 Building Links with the Portlet URL Types

To build links with the URL parameters, you need to access them and use them when writing portlet rendering code. To fetch the URL for a link, you call the following APIs in the PDK:

portletRenderRequest.getRenderContext().getPageURL()
portletRenderRequest.getRenderContext().getEventURL()
portletRenderRequest.getRenderContext().getDesignURL()
portletRenderRequest.getRenderContext().getLoginServerURL()
portletRenderRequest.getRenderContext().getBackURL()

In the case of portlet navigation, you need to add (or update) your portlet's parameters in the page URL. To perform this task, you can use the following API to build a suitable URL:

UrlUtils.constructLink(
PortletRenderRequest pr,
int linkType, -- UrlUtils.PAGE_LINK in this case
NameValue[] params,
boolean encodeParams,
boolean replaceParams)

UrlUtils resides in the package called oracle.portal.provider.v2.url. Notice that you do not actually fetch the page URL yourself. Rather you use one of the supplied portlet URL types, UrlUtils.PAGE_LINK.

The parameter names in the params argument should be fully qualified. Moreover, assuming that you properly qualify the parameters, UrlUtils.constructLink with the appropriate linkType does not disturb other URL parameters that are not owned by the portlet.

An alternative version of UrlUtils.contructLink accepts a URL as the basis for the returned URL. If you require an HTML link, you can use UrlUtils.constructHTMLLink to produce a complete anchor element.

The following example portlet, ThesaurusLink.jsp, uses the parameter q to identify the word for which to search the thesaurus. It then creates links on the found, related words that the user may follow in order to get the thesaurus to operate on that new word. Refer to the example in Section 7.2.3.3.3, "Building Forms with the Portlet URL Types" to see the initial submission form that sets the value of q.

Note:

When rendering attributes in SimpleResult (for a mobile portlet), you must escape the attribute value if it is likely to contain invalid XML characters. Most URLs contain & to separate the URL's parameters. Hence, you usually need to escape attributes that contain URLs with:

oracle.portal.utils.xml.v2.XMLUtil.escapeXMLAttribute

<%
String paramNameQ = "q";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(paramNameQ);
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String paramValueQ = pRequest.getQualifiedParameter(paramNameQ);
%>
<!-- Output the HTML content -->
<center>
Words similar to <%= paramValueQ %>
<br>
Click on the link to search for words related to that word.
<br>
<ul>
<%
String[] relatedWords = Thesaurus.getRelatedWords(paramValueQ);
NameValue[] linkParams = new NameValue[1];
for (int i=0; i<=relatedWords.length; i++)
{
linkParams[0] = new NameValue(
qualParamNameQ, relatedWords[i]);
%>
<li>
<b> <%= relatedWords[i] %> </b>
<%= UrlUtils.constructHTMLLink(
pRequest,
UrlUtils.PAGE_LINK,
"(words related to " + relatedWords[i] + ")",
"",
linkParams,
true,
true)%>
</li>
<%
}
%>
</ul>
</center>

7.2.3.3.3 Building Forms with the Portlet URL Types

Use of portlet parameters in forms is little different from links. The following two fundamental rules continue to apply:

- Qualify the portlet's parameter names.

- Do not manipulate or remove the other parameters on the incoming URL.

In terms of markup and behavior, forms and links differ quite considerably. However, just as with links, PDK-Java contains utilities for complying with these two basic rules.

The code for properly qualifying the portlet's parameter name is the same as described in Section 7.2.3.3.2, "Building Links with the Portlet URL Types". After all, a parameter name is just a string, whether it be a link on a page or the name of a form element.

Forms differ from links in the way you ensure that the other parameters in the URL remain untouched. Once you open the form in the markup, you can make use of one of the following APIs:

UrlUtils.htmlFormHiddenFields(pRequest,UrlUtils.PAGE_LINK, formName);
UrlUtils.htmlFormHiddenFields(someURL);

where formName = UrlUtils.htmlFormName(pRequest,null).

Note:

Just as parameters in URLs and element names in forms require qualification to avoid clashing with other portlets on the page, form names must be fully qualified because any given page might have several forms on it.

The htmlFormHiddenFields utility writes HTML hidden form elements into the form, one form element for each parameter on the specified URL that is not owned by the portlet.

<INPUT TYPE="hidden" name="paramName" value="paramValue">

Thus, the developer needs only to add their portlet's parameters to the form.

The other item of which you need to be aware is how to derive the submission target of your form. In most cases, the submission target is the current page:

formTarget = UrlUtils.htmlFormActionLink(pRequest,UrlUtils.PAGE_LINK)

The value of formTarget can be the action attribute in an HTML form or the target attribute in a SimpleForm. Even though the method name includes HTML, it actually just returns a URL and thus you can use it in mobile portlets, too.

The following example form renders the thesaurus portlet's submission form. Refer to the example in Section 7.2.3.3.2, "Building Links with the Portlet URL Types" for the portlet that results from the submission of this form.

<%
String paramNameSubmit = "submit";
String paramNameQ = "q";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(paramNameQ);
String qualParamNameSubmit =
HttpPortletRendererUtil.portletParameter(paramNameSubmit);
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String formName = UrlUtils.htmlFormName(pRequest,"query_form");
%>
<!-- Output the HTML content -->
<center>
<b>Thesaurus</b>
Enter the word you wish to search for
<form name="<%= formName %>" method="POST"
action="<%= UrlUtils.htmlFormActionLink(pRequest,UrlUtils.PAGE_LINK) %>">
<%= UrlUtils.htmlFormHiddenFields(pRequest,UrlUtils.PAGE_LINK, formName)%>
<table><tr><td>
Word of interest:
</td><td>
<input
type="text"
size="20"
name="<%= qualParamNameQ %>"
value="">
</td></tr></table>
<input type=submit name="<%= qualParamNameSubmit %>" Value="Search">
</form>
</center>

7.2.3.3.4 Implementing Navigation within a Portlet

You can implement navigation within a portlet in one of three ways, as follows:

- Pass navigation information in rendered URLs using explicit portlet parameters. Branching logic within the portlet code then determines which section of the portlet to render based on the URL. This option represents a small extension to the thesaurus example presented in Section 7.2.3.3.2, "Building Links with the Portlet URL Types" and Section 7.2.3.3.3, "Building Forms with the Portlet URL Types". Basically, instead of performing thesaurus search operations using the value of parameter q, the portlet branches based on the parameter value and renders different content accordingly.

- Pass navigation information as described in the previous item but use PDK-Java to interpret the parameter and thus branch on its value. This option requires some further changes to the thesaurus example and is more fully explained subsequently.

- Use session storage to record the portlet state and URL parameters to represent actions rather than explicit navigation. This method provides the only way that you can restore the portlet to it's previous state when the user navigates off the page containing the portlet. Once the user leaves the page, all portlet parameters are lost and you can only restore the state from session storage, assuming you previously stored it there. This option requires that you understand and implement session storage. Refer to Section 7.2.6.2, "Implementing Session Storage" for more information about implementing session storage.

The following portlet code comes from the multi-page example in the sample provider of PDK-Java:

<portlet>
<id>11</id>
<name>Multipage</name>
<title>MultiPage Sample</title>
<shortTitle>MultiPage</shortTitle>
<description>
This portlet depicts switching between two screens all
in the context of a Portal page.
</description>
<timeout>40</timeout>
<timeoutMessage>MultiPage Sample timed out</timeoutMessage>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/html</contentType>
<showPage>/htdocs/multipage/first.jsp</showPage>
<pageParameterName>next_page</pageParameterName>
</renderer>
</portlet>

Notice that the value of pageParameterName is the name of a portlet parameter, next_page, that the PDK framework intercepts and interprets as an override to the value of the showPage parameter. If the PDK framework encounters the qualified version of the parameter when the multi-page portlet is requested, it will render the resource identified by next_page rather than first.jsp. Note that the PDK does not render the parameter within the portlet, that responsibility falls to the portlet.

You can modify the thesaurus example to operate with the use of this parameter. Specifically, you can use the form submission portlet to be the input for the thesaurus (the first page of the portlet), then navigate the user to the results page, which contains links to drill further into the thesaurus. The following examples illustrate these changes.

Note:

The example that follows is most useful for relatively simple cases, such as this thesaurus example. If your requirements are more complex (for example, you want to build a wizard experience), then you should consider using an MVC framework such as Struts. For information on how to build portlets from struts applications, refer to Section 7.3, "Building Struts Portlets with Oracle JDeveloper".

ThesaurusForm.jsp:

<%
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String paramNameSubmit = "submit";
String paramNameQ = "q";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameQ);
String qualParamNameSubmit =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameSubmit);
String formName = UrlUtils.htmlFormName(pRequest,"query_form");
%>
<!-- Output the HTML content -->
<center>
<b>Thesaurus</b>
Enter the word you wish to search for
<form name="<%= formName %>" method="POST"
action="<%= UrlUtils.htmlFormActionLink(pRequest,UrlUtils.PAGE_LINK) %>">
<%= UrlUtils.htmlFormHiddenFields(pRequest,UrlUtils.PAGE_LINK, formName)
%>
<%= UrlUtils.emitHiddenField(
HttpPortletRendererUtil.portletParameter(request, "next_page"),
"htdocs/path/ThesaurusLink.jsp" ) %>
<table><tr><td>
Word of interest:
</td><td>
<input
type="text"
size="20"
name="<%= qualParamNameQ %>"
value="">
</td></tr></table>
<input type=submit name="<%= qualParamNameSubmit %>" Value="Search">
</form>
</center>

Notice how next_page must be explicitly set to point to ThesaurusLink.jsp. If you do not explicitly set next_page in this way, it defaults to the resource registered in provider.xml, which is ThesaurusForm.jsp.

ThesaurusLink.jsp:

<%
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String paramNameQ = "q";
String paramNameNextPage = "next_page";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameQ);
String qualParamNameNextPage =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameNextPage);
String paramValueQ = pRequest.getQualifiedParameter(paramNameQ);
%>
<!-- Output the HTML content -->
<center>
Words similar to <%= paramValueQ %>
<br>
Click on the link to search for words related to that word.
<br>
<ul>
<%
Thesaurus t = new Thesaurus();
String[] relatedWords = t.getRelatedWords(paramValueQ);
NameValue[] linkParams = new NameValue[2];
linkParams[0] = new NameValue(
qualParamNameNextPage, "htdocs/path/ThesaurusLink.jsp");
for (int i=0; i<relatedWords.length; i++)
{
linkParams[1] = new NameValue(
qualParamNameQ, relatedWords[i]);
%>
<li>
<b> <%= relatedWords[i] %> </b>
<%= UrlUtils.constructHTMLLink(
pRequest,
UrlUtils.PAGE_LINK,
"(words related to " + relatedWords[i] + ")",
"",
linkParams,
true,
true)%>
</li>
<%
}
%>
</ul>
<a href="<%=XMLUtil.escapeXMLAttribute
(pRequest.getRenderContext().getPageURL())%>">
Reset Portlet
</a>
</center>

Partial Page Refresh

Portlets can refresh themselves without refreshing the entire page. For example, in the multi-page portlet sample, firstpage.jsp uses the API to specifically enable the portlet to link to and display the second page without refreshing the entire portal page. The text in bold in the following example shows how this can be set:

<%@ page contentType="text/html;charset=UTF-8" %>
<%@ page language="java" session="false" %>
<%@ page import="oracle.portal.provider.v2.url.UrlUtils" %>
<%@ page import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil" %>
<%@ page import="oracle.portal.provider.v2.render.PortletRenderRequest" %>
<%@ page import="oracle.portal.provider.v2.http.HttpCommonConstants" %>
<%@ page import="oracle.portal.utils.NameValue" %>
<%
PortletRenderRequest prr = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);

NameValue[] linkParams = new NameValue[1];
linkParams[0] = new NameValue(HttpPortletRendererUtil.portletParameter(request,
"next_page"), "/htdocs/multipage/second.jsp");
%>

<center>
Hello, this is the first page<p>
<%=UrlUtils.constructHTMLLink(prr, UrlUtils.REFRESH_LINK, "second page", "", linkParams, true, true)%>
</center>

7.2.3.4 Submitting Events

In the previous section, you created a portlet that received parameters. Now you will create a portlet that passes parameters and events to other portlets on the same page or a different page. Some portlets, like the Simple Parameter Form in OmniPortlet, provide an easy, declarative interface to create a simple form to pass parameters to other portlets. If you want complete control over the events passed and the look of your portlet, though, you can add events to your Java portlet.

The Portlet Wizard does not create all of the code needed to pass parameters to other portlets. The wizard updates the tags in provider.xml and requires that you add the necessary business logic to your JSP code. To create a portlet that uses events, you perform the following tasks:

- Create a new portlet with the Portlet Wizard.

- Add code to your JSP page.

- Map this portlet's parameters to the portlet you created in Section 7.2.3.2, "Adding Public Parameters".

Creating an Events Portlet

To create an events portlet, perform the following steps:

1. Create a new portlet called MyEventsPortlet in the same provider you used for the parameter portlet in Section 7.2.3.2, "Adding Public Parameters"by invoking the Portlet Wizard (Figure 7-6). Go through the wizard as normal. In step 5 of the wizard, create a parameter. In step 6 of the wizard, enter the information shown in Table 7-1.

Table 7-1 Events

Events Area

Name

Display Name

Description

Events Exposed

MyEvent

My Event

This is my event.

Parameters Associated

MyParam

My Parameter

This is my parameter

Figure 7-6 Public Portlet Events Page of Portlet Wizard

The wizard generates the following code in provider.xml:

Note:

In the following example, notice that the input parameter and the event parameter have the same name, MyParam. They are two different parameters, even though they have the same name.

<showDetails>false</showDetails>
<inputParameter class="oracle.portal.provider.v2.
DefaultParameterDefinition">
<name>MyParam</name>
<displayName>My Parameter</displayName>
</inputParameter>
<event class="oracle.portal.provider.v2.DefaultEventDefinition">
<name>MyEvent</name>
<displayName>My Event</displayName>
<parameter class="oracle.portal.provider.v2.DefaultParameterDefinition">
<name>MyParam</name>
<displayName>My Parameter</displayName>
</parameter>
</event>
<renderer class="oracle.portal.provider.v2.render.RenderManager">

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

2. Import the following necessary classes into MyEventsPortlet:

- oracle.portal.provider.v2.event.EventUtils

- oracle.portal.utils.NameValue

- oracle.portal.provider.v2.url.UrlUtils

3. In MyEventsPortlet, add a link that passes the parameter value to another portlet. As shown in the following sample code, you receive the same page parameter as the previous portlet, but in addition you create a link that passes an event as well:

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.ParameterDefinition"
import="oracle.portal.provider.v2.event.EventUtils"
import="oracle.portal.utils.NameValue"
import="oracle.portal.provider.v2.url.UrlUtils"
%>
<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
%>
<%
NameValue[] parameters = new NameValue[2];
parameters[0] = new NameValue( EventUtils.eventName("MyEvent"),"");
parameters[1] = new
NameValue(EventUtils.eventParameter("MyParam"),pReq.getParameter
("MyParam"));
%>
<span class="portletText1"><br>

<a href="<%= UrlUtils.constructLink
(pReq, pReq.getRenderContext().getEventURL(), parameters , true, true)%>">
The value of the stock is <%= pReq.getParameter("MyParam") %>
</a>
<br><br></span>

Note:

This sample code does not handle NULL values. When the portlet is initially added to the page, you may receive an error, but, after wiring the portlet to the page parameter, it should work fine.

4. Add the portlet to a different page (in the same page group) than the previous portlet (the Parameter Portlet). Expand the portlet and wire it to receive the same parameter as the previous portlet.

My Parameter = Page Parameter MyParameter

5. Apply your changes on the Parameter tab and go to the Events tab. Expand the Event portlet and select the event. Select Go to Page and find the page to which you want to pass the event. Choose the page where the Parameter portlet is located. Configure this portlet to pass an event as the page parameter MyParameter as shown in Figure 7-7.

MyParameter = Event Output MyParameter

Figure 7-7 Portlet Events in the Edit Page

6. Click OK to view the page. Your Event portlet should have a link that displays the value received from the page (Figure 7-8).

Figure 7-8 My Event Portlet Before Parameter Change

7. You can append a parameter value to the URL and the portlet displays the value in the link.

&MyParameter=20

8. When you click the link, that value is passed to the Parameter portlet on its page (Figure 7-9).

Figure 7-9 My Event Portlet After Parameter Change

7.2.4 Using JNDI Variables

When writing Java portlets, you may set deployment specific properties through the JNDI service such that their values may be retrieved from your provider code. In this way, you can specify any property in a provider deployment and then easily access it anywhere in your provider code. PDK-Java provides utilities to enable the retrieval of both provider and non-provider JNDI variables within a J2EE container. To use JNDI variables, you need to perform the following tasks:

- Section 7.2.4.1, "Declaring JNDI Variables"

- Section 7.2.4.2, "Setting JNDI Variable Values"

- Section 7.2.4.3, "Retrieving JNDI Variables"

7.2.4.1 Declaring JNDI Variables

You declare JNDI variables in the web.xml file for your provider. The format for declaring a JNDI variable is as follows:

<env-entry>
<env-entry-name>variableName</env-entry-name>
<env-entry-type>variableType</env-entry-type>
<env-entry-value>variableValue</env-entry-value>
</env-entry>

The env-entry-name element contains the name by which you want identify the variable. env-entry-type contains the fully qualified Java type of the variable. env-entry-value contains the variable's default value.

7.2.4.1.1 Variable Types

In the env-entry-type element, you should supply the fully-qualified Java type of the variable, which will be expected by your Java code. The Java types you may use in your JNDI variables are as follows:

- java.lang.Boolean

- java.lang.String

- java.lang.Integer

- java.lang.Double

- java.lang.Float

The J2EE container uses these type declarations to automatically construct an object of the specified type and gives it the specified value when you retrieve that variable in your code.

7.2.4.1.2 Variable Naming Conventions

The PDK-Java defines a number of environment variables that can be set at the individual provider service level or at the Web application level. To avoid naming conflicts between different provider services or different application components packaged in the same Web application, we recommend you devise some naming convention.

Note:

If you use the EnvLookup method, you must use oracle/portal/provider/service/property. You cannot substitute your own company name or component in this case.

For example:

- Provider service specific names should be of the form:

{company}/{component name}/{provider name}/{variable name}

- Shared names should be of the form:

{company}/{component name}/{provider name}/global

where:

- {company} is the name of the company owning the application.

- {component name} is the name of the application or component with which the provider is associated.

- {provider name} is the service name of the provider.

- {variable name} is the name of the variable itself.

As you can see, these naming conventions are similar to those used for Java packages. This approach minimizes the chance of name collisions between applications or application components. PDK-Java provides utilities that allow you to retrieve variables in this form without hard coding the service name of the provider into your servlets or JSPs. The service name need only be defined in the provider's WAR file. Refer to Section 7.2.4.3, "Retrieving JNDI Variables" for more information on retrieving JNDI variables.

7.2.4.1.3 Examples

The following examples illustrate provider variable names:

oracle/portal/myProvider/myDeploymentProperty
oracle/portal/myprovider/myProperties/myProperty

The following example illustrates non-provider variable names:

oracle/portal/myOtherProperty

7.2.4.2 Setting JNDI Variable Values

In your provider deployment, you may want to set a new value for some or all of your JNDI variables. You can perform this task by setting the values manually in a Oracle WebLogic Server deployment plan as follows:

1. Go to the provider deployment in the Oracle WebLogic Administration Console, and create a new Deployment Plan if one hasn't been set against it.

2. Edit the Deployment Plan XML file. For each deployment property you want to set, add the following variable definition directly under the <deployment-plan> tag:

<variable-definition>
<variable>
<name>jndi_var_def</name>
<value>false</value>
</variable>
</variable-definition>

3. To tie this variable definition to and actual JNDI variable that you want to set, do the following for each property under the WEB-INF/web.xml module descriptor (oracle/portal/sample/rootDirectory is used as an example):

<module-descriptor external="false">
<root-element>web-app</root-element>
<uri>WEB-INF/web.xml</uri>
<variable-assignment>
<name>jndi_var_def</name>        <xpath>/web-app/env-entry/[env-entry-name=&quot;oracle/portal/sample/rootDirectory&quot;]/env-entry-value</xpath>
</variable-assignment>
</module-descriptor>

4. Save the file.

5. Select 'Update' on the provider deployment to apply the Deployment Plan for the new settings to take effect.

7.2.4.3 Retrieving JNDI Variables

JNDI is a standard J2EE technology. As such, you can access JNDI variables through J2EE APIs. For example:

String myVarName = "oracle/portal/myProvider/myVar"
String myVar = null;
try
{
InitialContext ic = new InitialContext();
myVar = (String)ic.lookup("java:env/" + myVarName);
}
catch(NamingException ne)
{
exception handling logic
}

In addition to the basic J2EE APIs, PDK-Java includes a simple utility class for retrieving the values of variables defined and used by the PDK itself. These variables all conform to the naming convention described in Section 7.2.4.1.2, "Variable Naming Conventions" and are of the form:

oracle/portal/provider_service_name/variable_name
oracle/portal/variable_name

To use these APIs, you need only provide the provider_service_name and the variable_name. The utilities construct the full JNDI variable name, based on the information you provide, and look up the variable using code similar to that shown earlier and return the value of the variable.

The EnvLookup class (oracle.portal.utils.EnvLookup) provides two lookup() methods. One retrieves provider variables and the other retrieves non-provider variables. Both methods return a java.lang.Object, which can be cast to the Java type you are expecting.

The following code example illustrates the retrieval of a provider variable:

EnvLookup el = new EnvLookup();
String s = (String)el.lookup(myProviderName, myVariableName);

myProviderName represents the service name for your provider, which makes up part of the variable name. myVariableName represents the portion of the variable name that would come after the provider's service name. The example assumes the variable being retrieved is of type java.lang.String.

To retrieve a non-provider variable, you use the same code, you pass only one parameter, the variable name, to the lookup(), again excluding the oracle/portal prefix.

EnvLookup el = new EnvLookup();Object o = el.lookup(myVariableName);

Table 7-2 shows the JNDI variables provided by default with PDK-Java. If you do not declare these variables, PDK-Java looks for their values in their original locations (web.xml and the deployment properties file).

Table 7-2 PDK-Java JNDI Variables

Variable

Description

oracle/portal/provider/provider_name/autoReload

Boolean auto reload flag. Defaults to true.

oracle/portal/provider/provider_name/definition

Location of provider's definition file.

oracle/portal/provider/global/log/logLevel

Log setting (0 through 8). 0 being no logging and 8 the most possible logging.

oracle/portal/provider/provider_name/maxTimeDifference

Provider's HMAC time difference.

oracle/portal/provider/<service_name>/resourceUrlKey

Authentication key for resource proxying through the Parallel Page Engine. Refer to Oracle Fusion Middleware Administrator's Guide for Oracle Portal for more information.

oracle/portal/provider/provider_name/rootDirectory

Location for provider personalizations. No default value.

oracle/portal/provider/provider_name/sharedKey

HMAC shared key. No default value.

oracle/portal/provider/provider_name/showTestPage

(non-provider) A boolean flag that determines if a provider's test page is accessible. Defaults to true.

oracle/portal/provider/global/transportEnabled

A boolean flag that determines whether Edit Defaults personalizations may be exported and imported. Refer to Section 7.2.8.3.2, "Disabling Export/Import of Personalizations" for more information.

7.2.5 Creating Private Events

In some cases, it is useful for a portlet to complete a transaction before rendering a page on which it resides rather than having the transaction and the rendering executed simultaneously. For example, suppose a portlet has a link that initiates an update of some data value that might effect other portlets on the page. If the transaction takes place simultaneously with a refresh of the page, other portlets that rely on that data value may or may not be refreshed with the latest value. Furthermore, when transactions and rendering are tied together in this way, an action such as the user hitting Back in their browser could cause the transaction to be repeated, perhaps creating a duplicate record.

In JPS portlets, this situation is solved using the processAction method, which allows an individual portlet to complete a transaction, such as updating a value, before allowing the page rendering to take place. PDK-Java does not have processAction, but you can achieve the same results by submitting data to your servlet through a different mechanism. If you are using Struts for the page flow and control of a portlet, you could use the form tag and transaction tokens to avoid submitting the same parameter twice. Refer to Section 7.3, "Building Struts Portlets with Oracle JDeveloper" for more information about Struts portlets.

Another possibility is to submit data through Edit mode rather than Shared Screen mode. Requests based on full page Show modes, such as Edit mode, are sent only to the portlet that generated the link. Other portlets on the same portal page never even see a render request. Hence, these full page Show modes provide you with the capability to execute a transaction for a portlet separately from the page and its other portlets.

Once you have processed the portlet's submission, you redirect from the full page Show mode back to the page using the back URL. This action has two desirable effects, as follows:

- It returns the user to the page from which they came.

- It clears all traces of the form submission from the browser.

As a result, any refreshing of the page is guaranteed to occur after the processing of the data submission. Because the page refresh comes after the submission you can be sure that all portlets on the page will access the updated data and not cause a duplicate submission.

This technique is illustrated by a sample portlet in the PDK called the private event submission portlet. It demonstrates submitting a simple form to the portlet and logging the contents of the form. In the private event submission portlet, we overload Edit mode to handle both the data submission and the portlet's rendering for personalizations. Note that any of the other full page Show modes (Edit, Help, About, and Edit Defaults) would be equally effective for this purpose.

Edit mode for this portlet includes additional code that first looks for a specific parameter. If this parameter is present, it means that the request represents a private event. The same mode can handle many different private events by using different values for the distinguishing parameter. If the distinguishing parameter does not exist, then Edit mode falls through to the standard portlet personalization logic.

After handling the private event, this mode redirects to the page using exactly the same logic that Edit mode uses when a user clicks OK. Refer to EditServlet.java in the sample files for the complete source code illustrating this technique.

Note:

When you use this technique, you must take care that the details of your event are persisted somewhere. Since portlet rendering does not happen in the same request cycle as the event processing, any data from the event required to render the portlet must be available from storage. Otherwise, the portlet or the page may lack the data it requires the next time it is rendered.
If you need to persist your data, be sure to store it in a qualified manner (by the user and portlet reference). Otherwise, you may accidentally associate an event from one user/portlet with the rendering of the same portlet for another user on a different page, or even associate the same user/same portlet with a different portlet reference on the same page.

7.2.6 Accessing Session Information

When a user accesses any portal page, Oracle Portal initiates a public unauthenticated session and maintains a cookie to track information about the session across requests. If the user logs in to Oracle Portal, this session becomes an authenticated session of the logged-in user. This portal session terminates when the any of the following occur:

- The browser session terminates (that is, the user closes all the browser windows).

- The user explicitly logs out.

- The session times out because the user's idle time exceeds the configured limit.

As part of the metadata generation, Oracle Portal contacts all of the providers that contribute portlets to the page, if they specify during registration that they get called for some special processing. This call allows providers to do processing based on the user session, log the user in the provider's application if needed, and establish provider sessions in Oracle Portal. For Database providers, this call is referred to as do_login and for Web providers it is initSession. Since most Web-enabled applications track sessions using cookies, this API call allows the provider of the application to return cookies.

You can utilize the session store to save and retrieve information that persists during the portal session. This information is only available, and useful, to you during the life of the session. You should store only temporary information in the session store. Application developers may use the session store to save information related to the current user session. Data in the session store can be shared across portlets.

If the information you want to store must persist across sessions, you may want to store it in the preference store instead. Some common applications of the session store are as follows:

- to cache data that is expensive to load or calculate (for example, search results).

- to cache the current state of a portlet (for example, the current range, or page, of search results displayed in the portlet, or sequence of events performed by user).

Before you implement session storage, you should carefully consider the performance costs. Because portlets and providers are remote, it can be a relatively expensive operation to create and maintain even a small amount of information in the session store. For this reason, you may want to avoid altogether any session storage for public pages that are accessed frequently by many users.

If scalability is an important concern for you, a stateful application may cause you problems. Stateful applications can impact the load-balancing and failover mechanism for your Oracle Portal configuration. Even though you may deploy multiple middle-tiers accessing the same Oracle Portal instance, you must implement sticky routing (where the same node handles subsequent requests in the same session) to track state. Sticky routing may result in lopsided load-balancing or loss of session data in case a node crashes, impacting failover. This issue is one reason why many developers prefer to build stateless applications. However, if scalability is not a concern, then a stateful application should present no problems for you.

In the example in this section, session storage is used to count the number of times your portlet has rendered in Shared Screen mode.

7.2.6.1 Assumptions

To perform the tasks in this section, we are making the following assumptions:

1. You have followed through and understood Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

2. You built a portlet using the wizard and successfully added it to a page.

7.2.6.2 Implementing Session Storage

The PDK Framework represents the session with a ProviderSession object, which is established during the call to the Provider Instance's initSession method. This object is associated with the ProviderUser. To make data persistent between requests from Oracle Portal, you need to write data into the session object using the setAttribute method on the ProviderSession object. This method maps a java.lang.Object to a java.lang.String and stores that mapping inside the session object. The String can then be used to retrieve the Object during a subsequent request, provided the session is still valid.

A provider session may become invalid for the following reasons:

- The session times out.

- The invalidate method on ProviderSession is called.

- The JVM process running the servlet container is terminated.

All portlets contained by the same ProviderInstance share the same session for a particular ProviderUser. Therefore, data unique to a particular portlet instance must be mapped to a unique String in the session. This is accomplished using the portletParameter method in the PortletRendererUtil class. This method makes a supplied String parameter or attribute name unique to a PortletInstance, by prefixing it with a generated identifier for that instance. You can use the returned instance-specific name to write portlet instance data into the session.

For more detailed information on the PDK Framework classes, refer to the Javadoc on OTN by clicking Java Doc API on the Portlet Development page available at

http://www.oracle.com/technology/products/ias/portal/portlet_development_10g1014.html

To implement session storage, you need to perform the following tasks:

- Import ProviderSession, PortletRendererUtil, and HttpPortletRendererUtil.

- Retrieve the provider session.

- Read and write the session by accessing it from within your Java portlet.

- Set the session to true in provider.xml.

- Register the provider for session storage and set the Login Frequency.

The steps that follow describe how to add a session count to your portlet that displays how many times the portlet has been rendered for the current session.

1. After using the wizard to create a portlet, you can edit the JSP for the Show page in Oracle JDeveloper. You need to import the following classes:

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.ProviderSession"
import="oracle.portal.provider.v2.render.PortletRendererUtil"
import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"
%>

2. Insert code that checks for a valid session first and then increments the count and displays it. If the session is valid and a previously stored value exists, you display the value, increment the count, and store the new value. If the session is valid but no previously stored value exists, you initialize a new count starting with 1, and display and store the value. You also want to obtain the unique string key for this portlet and then use an it in an array to count the session. If no session information was received, you want to provide information to the user indicating they may need to log back in.

<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
ProviderSession pSession = pReq.getSession();
if (pSession != null)
{
String key = PortletRendererUtil.portletParameter(pReq, "count");
Integer i = (Integer)pSession.getAttribute(key);
if (i == null)
{
i = new Integer(0);
}
i = new Integer(i.intValue()+1);
pSession.setAttribute(key, i);
%>

<p>Render count in this session: <%=i%> </p>

<%
}
else
{
%>

<p>The session has become invalid</p>
<br>
Please log out and log in again.
<%
}
%>

3. By default, the wizard does not set session to true in provider.xml. You need to update this flag in order for the provider to receive session information from the portal. You should only set this tag to true if you are using session information in your provider or portlets. By setting this flag to true, extra load is added to the provider calls.

<provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
<session>true</session>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

4. Register the provider in Oracle Portal. Ensure that you select the User radio button and choose a Login Frequency of Once Per Session on the Define Connections page of the wizard. For a reminder on how to register your portlet, refer to Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet".

7.2.6.3 Viewing the Portlet

If you have not already added your Java portlet to a page, do so now. Ensure that you perform the following tasks:

- Set your provider to Once per User Session for the login frequency value.

- Refresh the provider to accept the new changes.

- Re-login in case your session is no longer valid.

7.2.7 Implementing Portlet Security

This section describes the available security services for your Java portlet.

For more detailed information about the PDK classes referred to in this section, refer to the Javadoc on OTN by clicking Java Doc API on the Portlet Development page available at

http://www.oracle.com/technology/products/ias/portal/portlet_development_10g1014.html

7.2.7.1 Assumptions

To perform the tasks in this section, we are making the following assumptions:

1. You have followed through and understood Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

2. You built a portlet using the wizard and successfully added it to a page.

7.2.7.2 Introduction to Portlet Security Features

This section introduces the major features that are available to secure your portlet providers.

7.2.7.2.1 Authentication

When a user first logs in to an Oracle Portal instance, they must enter their password to verify their identity and obtain access. This authentication is performed by OracleAS Single Sign-On Server server. Refer to Section 7.2.7.3, "Single Sign-On" for more information.

Once the user's identity is passed to the provider in shown requests, the provider code has access to the authenticated user's identity from the PortletRenderRequest that is available from the HttpServletRequest object as follows:

PortletRenderRequest pr = (PortletRenderRequest)request.getAttribute
(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String userName = pr.getUser().getName();

Refer to Oracle Fusion Middleware Administrator's Guide for Oracle Portal for more information.

7.2.7.2.2 Authorization

Authorization determines if a particular user may view or interact with a portlet. Oracle Portal provides the following two types of authorization checking:

- Portal Access Control Lists (ACLs): After a user is authenticated by OracleAS Single Sign-On Server, Oracle Portal uses ACLs to determine what privileges that user has to perform actions on portal objects, such as folders and portlets. The actions available to a user can range from simply viewing an object to performing administrative functions on it. If a user does not belong to a group that has been granted a specific privilege, Oracle Portal prevents that user from performing the actions associated with that privilege. Refer to Section 7.2.7.4, "Oracle Portal Access Control Lists (ACLs)" for more information.

- Programmatic Portlet Security: You can also implement your own security manager programmatically. Refer to Section 7.2.7.5, "Portlet Security Managers" for more information.

7.2.7.2.3 Communication Security

To this point, we have covered user authentication and authorization, which do not check the authenticity of messages received by a provider. The following measures can be used to properly secure communication between a portal and a web provider:

- Oracle Portal Server Authentication restricts access to a provider to a small number of recognized machines. This method compares the IP address or the host name of an incoming HTTP message with a list of trusted hosts. If the IP address or host name is in the list, the message is passed to the provider. If not, it is rejected before reaching the provider. Refer to Section 7.2.7.6, "Oracle Portal Server Security" for more information.

- Message Authentication uses a shared key to assert the Portal client identity and to prevent message tampering. Refer to Section 7.2.7.7, "Message Authentication" for more information.

- Message Encryption encrypts message contents. Refer to Section 7.2.7.8, "HTTPS Communication" for more information.

- User Input Escape causes Oracle Portal to escape any user input strings and treat them as text only to protect against XSS attacks, where an attacker attempts to pass in malicious scripts through user input forms. Refer to Section 7.2.7.10, "User Input Escape" for more information.

For more information about communication security, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

7.2.7.3 Single Sign-On

Portlets act as windows into an application. They display summary information and provide a way to access the full functionality of the application. Portlets expose application functionality directly in the portal or provide deep links that take you to the application itself to perform a task.

An application may need to authenticate the user accessing the application through the portlet. Following are the possible application authentication methods:

- Section 7.2.7.3.1, "Partner Application". In this case, the application user is the same authenticated user used by Oracle Portal.

- Section 7.2.7.3.2, "External Application". In this case, the Oracle Portal user is different from the application user, but the application user name and password are managed by the Oracle Portal user.

- Section 7.2.7.3.3, "No Application Authentication". In this case, the communication between provider and Oracle Portal is not protected at all.

For more information about Single Sign-On, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

7.2.7.3.1 Partner Application

A partner application is an application that shares the same OracleAS Single Sign-On Server as Oracle Portal for its authentication. Thus, when a user is already logged in to Oracle Portal, their identity can be asserted to the partner application without them having to log in again.

Partner applications are tightly integrated with OracleAS Single Sign-On Server. When a user attempts to access a partner application, the partner application delegates the authentication of the user to OracleAS Single Sign-On Server. Once a user is authenticated (that is, has provided a valid user name and password) for one partner application, the user does not need to provide a user name or password when accessing other partner applications that share the same OracleAS Single Sign-On Server instance. OracleAS Single Sign-On Server determines that the user was successfully authenticated and indicates successful authentication to the new partner application.

The advantages of a partner application implementation are as follows:

- Provides the tightest integration with Oracle Portal and OracleAS Single Sign-On Server.

- Provides the best single sign-on experience to users.

- Provides the most secure form of integration because user names and passwords are not transmitted between Oracle Portal and the provider.

The disadvantages of a partner application implementation are as follows:

- The application must share the same user repository as Oracle Portal even though the application's user community may be a subset of the Oracle Portal user community. While worth some consideration, this issue is a minor one because the portal pages that expose the application can be easily restricted to the application's user community.

- The application can only be tightly integrated to one or more OracleAS Single Sign-On Server instances if they share the same user repository.

- The application must be written such that it delegates authentication to OracleAS Single Sign-On Server.

- You must have access to the application source code.

7.2.7.3.2 External Application

An external application uses a different authentication server than Oracle Portal. The application may use a different instance of OracleAS Single Sign-On Server than that used by Oracle Portal or some other authentication method. However OracleAS Single Sign-On Server does store the user name and password of the external application for that user. This means that when a user is already logged into Oracle Portal, they will be logged into the external application without having to type in their user name or password.

Applications that manage the authentication of users can be loosely integrated with OracleAS Single Sign-On Server if the administrator registers them as external applications. When a user who was previously authenticated by OracleAS Single Sign-On Server accesses an external application for the first time, OracleAS Single Sign-On Server attempts to authenticate the user with the external application. The authentication process submits an HTTP request that combines the registration information and the user's user name and password for the application. If the user has not yet registered their user name and password for the external application, OracleAS Single Sign-On Server prompts the user for the required information before making the authentication request. When a user supplies a user name and password for an external application, OracleAS Single Sign-On Server maps the new user name and password to the user's Oracle Portal user name and stores them. They will be used the next time the user needs authentication with the external application.

The advantages of an external application implementation are as follows:

- Allows integration with many portals. If, however, one of the portals is preferred over the others, the application could be integrated as a partner application of that preferred portal and an external application of the others.

- Provides a single sign-on experience for users. However, users still must maintain different user names and passwords. In addition, the external application user name mapping must be maintained.

- Allows integration with multiple portals independent of their user repositories and OracleAS Single Sign-On Server.

- Avoids the requirement of having access to the application source code.

The disadvantages of an external application implementation are as follows:

- Does not share the same user repository as the portal, which requires additional maintenance of user information by the end user.

- Transmits the user name and password to the provider in plain text, unless you implement SSL.

7.2.7.3.3 No Application Authentication

The provider trusts the Oracle Portal instance sending the request completely. The provider can determine if the user is logged in and the portal user name, but the application has not authenticated the user.

The advantages of no application authentication are as follows:

- Provides the easiest form of integration and the fastest to implement.

The disadvantages of no application authentication are as follows:

- Provides the least security.

- Provides the weakest integration with Oracle Portal.

7.2.7.4 Oracle Portal Access Control Lists (ACLs)

When users log in to an Oracle Portal instance, they are authenticated by an OracleAS Single Sign-On Server instance. Having verified their identity, Oracle Portal uses ACLs to determine whether they are authorized to access particular portlets and add them to pages from the Portlet Repository.

Oracle Portal ACLs operate according to the following security characteristics:

- Privileges define the actions that can be performed on the object to which they are granted. Privileges include actions such as Manage and Execute.

- Oracle Portal users and their privileges are granted from the Administer tab of the Builder.

- Oracle Portal user groups are administered from the Administer tab of Oracle Portal Builder. Membership in the groups and privileges granted to the groups are all defined and maintained here. A privilege granted to a user group is inherited by all the users of that group.

- Provider privileges apply to the provider and all of its portlets. Provider ACLs are administered on the Provider tab of the Oracle Portal Navigator.

- Portlet privileges can override the privileges set for the provider of the portlet. Portlet ACLs are administered from the Provider tab of the Oracle Portal Navigator. Clicking Open for a provider takes you to a page that manages the portlets of the provider.

For more information on the available privileges for objects, users, and user groups in Oracle Portal, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

The advantages of ACLs are as follows:

- ACLs offer a simple, yet powerful, mechanism to secure Oracle Portal objects.

- Central management of user group membership simplifies the management of ACLs because it negates the necessity of modifying the ACLs associated with each object.

The disadvantages of ACLs are as follows:

- ACLs are applied at the provider or portlet level. You cannot vary the security rules for a portlet depending on the page where you place it.

7.2.7.5 Portlet Security Managers

Portlet security managers are implemented within a provider to verify that a given user may view an instance of the portlet. When a user views a page with a portlet instance on it, security managers determine whether the user has the appropriate privileges to see the portlet. Implementing access control methods in the provider restricts the retrieval of content from a portlet (that is, hides the portlet) from users without the appropriate privileges. Only if the specified characteristics, such as user details and preferences, pass the authorization logic will the content be retrieved for the user. If no portlet security methods are implemented in the provider, then any user name may be passed in, even fictitious, unauthenticated ones.

A provider can implement two portlet security methods as follows:

- Get a list of portlets.

- Verify the accessibility of the portlet.

Portlets have access to the Oracle Portal user privileges and groups of which the user is a member. The following information can be used by the security methods:

- The default group of the user

- The privileges of a user or group

- The highest available privilege of a user across all groups

- The objects the user can access (only in database providers)

AuthLevelSecurityManager has access to the following information about authorization level:

- Strongly authenticated.
The user has been authenticated by OracleAS Single Sign-On Server in the current Oracle Portal session, that is, the user logged in with a valid user name and password, and requested the portlet in the context of that session.

- Weakly authenticated.
A user who was previously strongly authenticated returns to view a page without an active Oracle Portal session. A persistent cookie (maintained by the user's browser) indicates that in some previous session the user logged on with a valid user name and password.

- Public or not authenticated.
The user has not logged in within the context of the current Oracle Portal session, and does not have a persistent cookie to indicate that such a state previously existed.

To incorporate these security services into your Java portlet, you simply need to update provider.xml and set the security level to strong, weak, or public. Place the following XML right before the </portlet> tag in provider.xml:

<securityManager class="oracle.portal.provider.v2.security.AuthLevelSecurityManager">
<securityLevel>strong</securityLevel>
</securityManager>

After you make this change to provider.xml, refresh the provider.

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

The advantages of security methods are as follows:

- You can enable a portlet to produce different output depending on the level of authorization.

The disadvantages of security methods are as follows:

- Most security manager implementations will use the authorization level or some other user specific element in an incoming message. A check of this type could be bypassed by an entity imitating an Oracle Portal instance.

7.2.7.5.1 Viewing the Portlet

After you add a security manager to a portlet, you can validate it by following these steps:

1. Ensure you are logged in to an Oracle Portal instance with privileges to create pages and add portlets to a page.

2. Create a new portal page, ensuring it is visible to PUBLIC.

3. Add your Java portlet to the page.

4. Make a note of the direct URL to your new Portal page.

5. Now log out of the Portal instance by clicking the Logout link.

6. Directly access the Portal page by entering the URL noted in Step 4 into your browser's address bar.

You will see the page created in Step 2 but not the portlet added in Step 3. When you added the portlet to the page, you were logged in and hence strongly authenticated. The PDK runtime detected this and allowed you to add the portlet. When you logged out and viewed the page, you were no longer strongly authenticated and hence the PDK Framework did not allow rendering of the portlet's contents.

If you log in again and view the page, you will see that the portlet is still there.

7.2.7.5.2 Implementing Your Own Security Manager

If your portlet requires special security arrangements which are not provided by the implementations shipped with the PDK, you will need to supply your own custom PortletSecurityManager controller class. To do this, extend the oracle.portal.provider.v2.security.PortletSecurityManager class and supply implementations for the two methods specified by the interface. Then replace the class attribute of the securityManager controller element in the XML provider definition with you new class name and configure child elements appropriately.

7.2.7.6 Oracle Portal Server Security

One way to prevent unauthorized access to providers is to restrict access to the provider to known client machines at the server level. Because only the identified clients may access the provider, this method defends against denial of service attacks.

In Oracle Application Server, you use the allow and deny directives in the httpd.conf file to control access to client machines based on their host names or IP addresses. If host names are used as discriminators, the server needs to look them up on its Domain Name Server (DNS), which adds extra overhead to the processing of each request. Using the IP address circumvents this problem, but the IP address of a remote client may change without warning.

The advantages of server security are as follows:

- It limits access to the provider to trusted hosts only.

- It simplifies configuration.

The disadvantages of server security are as follows:

- Oracle Web Cache does not have IP address checking capability. If Oracle Web Cache sits in front of a provider, you have no protection from a client on any host sending show requests to Oracle Web Cache.

- Restricting access to certain IP addresses and host names may be circumvented by sending messages to a provider containing fake IP addresses and host names. This trick is difficult to perform effectively since return messages go to the machine whose IP address was copied, but it can still cause problems.

For more information on this topic, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

7.2.7.7 Message Authentication

Message authentication uses a shared key known to the client (Portal instance) and provider to restrict access to known clients. This may be used in SSL communication with a provider instead of client certificates.

Oracle Portal sends a digital signature, calculated using a Hashed Message Authentication Code (HMAC) algorithm, with each message to a provider. A provider may authenticate the message by checking the signature using its own copy of the shared key. This technique may be used in Secure Socket Layer (SSL) communication with a provider instead of client certificates.

A single provider instance cannot support more than one shared key because it could cause security and administration problems. For instance, if one copy of the shared key is compromised in some way, the provider administrator has to create a new key and distribute it to all of the Oracle Portal clients, who then must update their provider definitions. The way around this problem is to deploy different provider services, specifying a unique shared key for each service. Each provider service has its own deployment properties file so that each service is configured independently of the others. The overhead of deploying multiple provider services within the same provider adapter is relatively small.

In a provider without Oracle Web Cache in front of it, this use of the same signature cookie over the lifetime of a provider session implies a trade-off between performance and the security provided by authenticating the requests. The signature cookie value is only calculated once after the initial SOAP request establishes the session with the provider. The shorter the provider session timeout, the more often a signature will be calculated providing greater security against a show request being resent illegally. However, the SOAP request required to establish a session incurs a time penalty.

In a provider using Oracle Web Cache to cache show request responses, you have a similar trade-off. Cached content is secured in the sense that incoming requests must include the signature cookie to retrieve it, but caching content for an extended period of time leaves the provider open to show requests being illegally trapped and resent to the provider.

While the signature element provides protection against interception and resending of messages, it does nothing to prevent interception and reading of message contents. Messages are still transmitted in plain text. If you are concerned about the content of messages being read by unauthorized people, you should use message authentication in conjunction with SSL.

The advantages of message authentication are as follows:

- Ensures that the message received by a provider comes from a legitimate Oracle Portal instance.

The disadvantages of message authentication are as follows:

- Causes administration problems if a provider serves more than one portal. Entails performance implications if made very secure by having a short session timeout.

For more information on this topic, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Credential Store Share Key

The Producer's shared key is stored in the credential store. To store a shared key into the credential store do the following:

Create the Credential

To create the credentials, run the following WLST command:

createCred(map='PDK', key='pdk.omniPortlet.sharedKey', user='sharedKey', password='1234567890abc')

Grant PDK Java Code Access to the Credential Store

To grant pdk java code access to the credential store permission :

grantPermission(appStripe=None,principalClass=None,principalName=None,codeBaseURL='file:${domain.home}/servers/WLS_Portal/tmp/_WL_user/-',permClass='oracle.security.jps.service.credstore.CredentialAccessPermission',permTarget='context=SYSTEM,mapName=PDK,keyName=*',permActions='read')

7.2.7.8 HTTPS Communication

Normal communication between Oracle Portal and a provider uses HTTP, a network protocol that transmits data as plain text using TCP as the transport layer. HTTPS uses an extra secured layer (SSL) on top of TCP to secure communication between a client and a server, making it difficult to intercept and read messages.

Each entity (for example, an Oracle Web Cache instance) receiving a communication using SSL has a freely available public key and a private key known only to the entity itself. Any messages sent to an entity are encrypted with its public key. A message encrypted by the public key may only be decrypted by the private key so that, even if a message is intercepted by a felonious third party, it cannot be decrypted.

Certificates used to sign communications ensure that the public key does in fact belong to the correct entity. These are issued by trusted third parties, known as Certification Authorities (CA). They contain an entity's name, public key, and other security credentials and are installed on the server end of an SSL communication to verify the identity of the server. Client certificates may also be installed on the client to verify the identity of a client.

Oracle Wallet Manager manages public key security credentials. It generates public and private key pairs, creates a certificate request to a CA, and installs the certificate on a server.

For more information on this topic, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Configuration of SSL

When a provider is registered from an Oracle Portal instance, only one URL is entered, which means either HTTP or HTTPS may be used but not both.

Each port on each server that may be used to receive SSL messages must have a server-side certificate installed (that is, an OracleAS Web Cache instance) in front of the Web provider and the server that hosts the provider. The certificate installed on a server port ensures that communication between two points is encrypted but does not authenticate the source of a message. Message authentication should be used as well to fully secure communication between a trusted Oracle Portal instance and a provider.

For more information about SSL configuration for Oracle Portal, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

7.2.7.9 LDAP (Oracle Internet Directory) Security

PDK-Java uses Portlet Security Managers for LDAP (Oracle Internet Directory) security. PDK-Java uses Oracle Internet Directory as a repository of users, groups, and permissions. It retrieves information about the logged-in user and determines whether the user has the required permissions to view the portlet and data within the portlet. By enabling Oracle Internet Directory security, your providers perform the following:

- Secure portlets based on groups.

- Restrict access to the administrative functions of your portlets (using your own security manager).

- Retrieve all of the user property information stored in the Oracle Internet Directory including first name, last name, title, e-mail, telephone number, groups, and photo.

- Create users and groups for Oracle Portal.

By default, Oracle Internet Directory security is disabled. You must make a change in the deployment properties file for a specific provider to enable this feature. Enabling and using Oracle Internet Directory to secure your portlets can be done quickly and easily. To do this, perform the following steps:

1. Enable the Oracle Internet Directory manager in the deployment properties files (provider_name.properties).

oidManager=true
oidAdminClass=class_that_extends_oracle.portal.provider.v2.oid.OidInfo

2. Provide the connection information for Oracle Internet Directory by extending the simple class called OidInfo.

3. Provide a list of groups that can view your portlet in the provider definition file.

<group>cn=group1,cn=groups,dc=us,dc=oracle,dc=com</group>

Your provider connects to Oracle Internet Directory using the information provided to the OidInfo class by you. The portlet accesses Oracle Internet Directory using the credentials provided (for example, user name and password) and performs the specified tasks. We recommend that you create an Oracle Internet Directory user specifically for your provider connection with the minimum set of privileges needed to complete the tasks requested by your portlets. For example, if your portlet only checks group information, do not connect to the Oracle Internet Directory as an administrator.

7.2.7.9.1 Implementing Oracle Internet Directory Security

PDK-Java provides a set of default classes specifically for Oracle Internet Directory integration. These classes handle the connection from your portlets to Oracle Internet Directory, enable your portlets to be secured based on Oracle Portal groups, and provide access to user property information from within Oracle Internet Directory. The classes used by your Web provider for Oracle Internet Directory integration are as follows:

- oracle.portal.provider.v2.oid.OidInfo receives the Oracle Internet Directory connection information provided by the developer and connects to Oracle Internet Directory. When building your own portlets, you should extend this class to send secure connection details from the provider to Oracle Internet Directory.

- oracle.portal.sample.v2.devguide.oid.UnsafeOidInfo is an extension of OidInfo and provides an easy way to test portlet security. This class is used by the Oracle Internet Directory samples in PDK-Java and parses the deployment properties file for the Oracle Internet Directory connection information (seen subsequently). This class should be used only for testing and development, it is not safe to use in a production scenario.

- oidManager is set to false by default. It must be set to true in provider_name.properties to enable Oracle Internet Directory. (If you have only one provider in your Web application, ensure that provider_name.properties is identical to _default.properties.) For example:

serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/lab_provider/provider.xml
autoReload=true
oidManager=true
oidAdminClass=oracle.portal.sample.v2.devguide.oid.UnsafeOidInfo
oidHost=myhost.mydomain.com
oidPort=oidPort
oidUser=oidUser
oidPasswd=oidPassword

- oidAdminClass is set to the class that extends OidInfo. PDK-Java provides UnsafeOidInfo by default, but as the name suggests, this class should not be used in production scenarios.

- oidHost is the machine where Oracle Internet Directory is hosted.

- oidPort is the port used by the Oracle Internet Directory.

- oidUser is the Oracle Internet Directory account.

- oidPasswd is the Oracle Internet Directory password.

For example:

serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/lab_provider/provider.xml
autoReload=true
oidManager=true
oidAdminClass=oracle.portal.sample.v2.devguide.oid.UnsafeOidInfo
oidHost=myhost.mydomain.com
oidPort=oidPort
oidUser=oidUser
oidPasswd=oidPassword

- oracle.portal.provider.v2.security.GroupSecurityManager manages which groups have access to your provider and its portlets. It retrieves this information from the provider definition file and is portlet specific. Each portlet in a provider may have different group settings. There is no limit on the number of groups that can be set using this tag, but, since the Web provider parses and validates each group in turn, listing many groups may degrade performance.

- <group> is the tag in provider.xml that handles group management. It lists the groups allowed to access the portlet. The group information here follows the same case sensitivity as the Oracle Internet Directory.

Note:

The following example refers to your portal_instance_id, which is specific to your installation. To find your instance identifier, refer to your Oracle Fusion Middleware Administrator's Guide for Oracle Internet Directory.

<securityManager class="oracle.portal.provider.v2.security.
GroupSecurityManager">
<group>cn=DBA,cn=portal_instance_id,cn=groups,
dc=us,dc=oracle,dc=com</group>
</securityManager>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

The advantages of Oracle Internet Directory security are as follows:

- Offers a simple, powerful way to secure your portlets.

- Secures data within your portlets based on the user's group membership.

- Creates users and groups directly from your portlets exposed as Web providers.

The disadvantages of Oracle Internet Directory security are as follows:

- Slightly degrades performance when authorizing your portlet through Oracle Internet Directory. There is a cost associated with obtaining group information from any LDAP server, but this cost only happens the first time a user accesses a portlet in a session.

- Requires provider access to Oracle Internet Directory.

- Assumes all Oracle Portal instances served by the provider use the same Oracle Internet Directory instance.

For more information on securing your providers using Oracle Internet Directory or to set up the sample portlets secured using Oracle Internet Directory, review the technical note, Installing the Oracle Internet Directory Portlets on OTN.

7.2.7.9.2 Viewing Your Portlets

After you secure your provider with Oracle Internet Directory, you can validate its behavior by following these steps:

1. Ensure you are logged in to an Oracle Portal instance as a user who is a member of the group specified in the <group> tag in provider.xml.

2. Use an existing page or create a new one, ensuring it is visible to PUBLIC.

3. Add your Java portlet to the page.

4. Make a note of the direct URL to your new page.

5. Click Logout.

6. Directly access the page by entering the URL noted in Step 4 in your browser's address bar or login to Oracle Portal using a user that is not part of the group listed in provider.xml.

You will see the page created in Step 2 but not the portlet added in Step 3, as shown in Figure 7-10. When you added the portlet to the page, you were logged in as a user authorized to view the portlet. The PDK runtime detected this and allowed you to add the portlet. When you logged out and viewed the page, you were no longer part of the group allowed to view the portlet and hence the PDK Framework did not allow rendering of the portlet's contents.

Figure 7-10 Page and Portlets for Developer

If you log in again and view the page, you will see that the portlet is still there (Figure 7-11).

Figure 7-11 Page and Portlets for Developer/Administrator

7.2.7.10 User Input Escape

By accepting user input without escaping it to text, you run the risk of an XSS attack, where an attacker attempts to pass in malicious scripts through user input forms. For example, if a portlet title is customizable, an attacker might attempt to pass scripts or commands to the portlet through the title string. Oracle Portal provides the following features to ensure that you can protect your portlets from such attacks:

- Section 7.2.7.10.1, "Default Container Encoding"

- Section 7.2.7.10.2, "Escape Methods"

7.2.7.10.1 Default Container Encoding

To prevent any script inside a portlet title from being executed, the framework default container renderer class encodes any script characters. This default behavior is controlled through a JNDI variable, escapeStrings. When set to true, the markup tags in portlet titles are rendered as visible tag characters. For example, a title customization of <i>title</i> will be rendered as <i>title</i> not title. This mode is secure, but, if it is not the desired behavior, you can set escapeStrings to false for that provider.

escapeStrings applies to all logical providers within a Web provider. You can set the value of escapeStrings from the WebLogic Server Administration Console as you would any other JNDI variable. Refer to Section 7.2.4.2, "Setting JNDI Variable Values" for more information.

7.2.7.10.2 Escape Methods

If you have code that renders customized values, you need to ensure that you escape those input values appropriately to avoid XSS attacks. This requirement applies to code for rendering pages in any mode. Oracle Portal supplies two new static methods for this purpose. They are in the Java class oracle.portal.provider.v2.url.UrlUtils, and can be described as follows:

- public static escapeString(string_text) escapes any script characters in a given string. For example, less than < becomes &lt. This method is unaffected by the escapeStrings JNDI variable and is the secure, recommended method to use.

- public static escapeStringByFlag(string_text) escapes any script characters in a given string. This method is controlled by the escapeStrings JNDI variable and is therefore less secure and not the recommended method to use.

For example:

title = UrlUtils.escapeString(data.getPortletTitle());

7.2.8 Controlling the Export/Import of Portlet Personalizations

The export/import facility of Oracle Portal is a multi-purpose tool for moving your portal objects, such as portlets, between instances of Oracle Portal. For example, you might use export/import to move objects from a development environment to a stage environment and then, finally, to a production environment. You might also use export/import to move pages and page groups between Oracle Portal instances, or to move Web providers from one machine to another. For more information about export/import in general, please refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Because portlet default settings can be set by the administrator and then changed by the user, they require some special consideration when you import and export them. To simplify the transport process, Oracle Portal provides default functionality that handles administrator personalization data (that is, data created using Edit Defaults mode) for you. When a portlet is exported, the default personalization data stored using PDK-Java's PreferenceStore mechanism is exported with the portlet by default. Hence, when the portlet is imported into a target instance of Oracle Portal, this data is imported along with it. As a result, the portlet instance's default settings are maintained when the portlet is moved from one portal instance to another.Foot 1

The aforementioned behavior is provided to you as a convenience and it requires no action on your part to leverage. You might, however, want to exercise more granular control over the export of personalization data than that provided by the default functionality. To implement your own requirements for export/import, you can make use of the programming interface to augment or override the default handling of personalizations.

If you use the PDK-Java preference store mechanism, the export/import of your Edit Default personalizations is built-in and requires no additional effort on your part. This default export/import of administrator personalizations relies on the PDK-Java preference store. If you have created your own preference store mechanism (for example, a file or database preference storage system), then you also must implement your own export/import support that performs the following functions:

- Exports personalizations. This functionality must at least export administrator personalizations, but it could optionally include user personalizations, too.

- Imports personalizations. Note that this functionality must reflect whatever you implemented for export. For example, if you allow the export of both administrator and user personalizations, then the import functionality must support both as well.

The export/import functionality for personalizations requires that your Oracle Portal instance and provider are on Release 10.1.2. Export/import of personalizations behaves the same regardless of the location of your provider, which can be either of the following:

- in the default Oracle Containers for Java EE of the Oracle Application Server, where the Oracle Portal instance is different.

- in a separate Oracle Containers for Java EE, where the Oracle Portal instance may be different, and the provider is the same but is not registered on the target Oracle Portal instance.

7.2.8.1 Import/Export Programming Interface

The PDK-Java's preference store mechanism allows data to be persisted by any number of application entities. The following three entities are the ones that persist data for the purposes of export/import:

1. The portlet instance is the portlet on a page with the default personalizations made to it by the administrator. The API for the portlet instance is as follows:

- oracle.portal.provider.v2.PortletInstance

- exportData

public byte[] exportData
(
boolean exportUsers,
String[] userNames,
TransportLogger logger
)    throws PortletException

- importData

public void importData
(
byte[] data,
TransportLogger logger
)
throws PortletException

2. The portlet definition is the base portlet without any personalizations applied to it. You might think of the portlet definition as the version of the portlet that exists in the Portlet Repository before it is placed on a particular page for use. The API for the portlet definition is as follows:

- oracle.portal.provider.v2.PortletDefinition

- exportData

public byte[] exportData
(
ProviderInstance pi,
boolean exportUsers,
String[] userNames,
TransportLogger logger
)
throws PortletException

- importData

public void importData
(
ProviderInstance pi,
byte[] data,
TransportLogger logger
)
throws PortletException

3. The provider instance is the entity that contains and communicates with a set of portlets. The API for the provider instance is as follows:

- oracle.portal.provider.v2.ProviderInstance

- exportData

public byte[] exportData
(
boolean exportUsers,
String[] userNames,
TransportLogger logger
)
throws ProviderException

- importData

public void importData
(
byte[] data,
TransportLogger logger
)
throws ProviderException

By default, each of these entities employs an instance of oracle.portal.provider.v2.transport.PrefStoreTransporter to transform the data from an oracle.portal.provider.v2.preference.PreferenceStore to a byte array for transport. For the default export/import behavior, though, only the portlet instance entity's personalization data is exported and imported. If you have persisted data at the portlet definition or provider instance level, you may want to export that data as well. For example, a billing handle that you persisted at the ProviderInstance level may need to be exported.

To change the behavior of PrefStoreTransporter, you can override its default implementation. The example in Section 7.2.8.3.7, "Exporting by Reference Example" illustrates how you can override PrefStoreTransporter.

Logging Interface

To simplify troubleshooting of your export/import transactions, you can send messages to both the calling Oracle Portal instance and the Web provider log. PDK-Java provides a transport logging class that enables you to add events to the log during export and import operations. In this way, you can better keep track of events that occur during the transport of portlet personalizations. The log can be a valuable troubleshooting tool if you encounter unexpected behavior in your portlets during or after transport. For example, you can log events when incompatibilities between PDK-Java versions are found.

You log events using the logger object, an instance of the oracle.portal.provider.v2.transport.TransportLogger class provided for each of the methods mentioned earlier. You log events with the calling portal through the instance provided for each method. You record events in the Web provider log with the normal logging mechanism, oracle.portal.log.LogManager. The log levels for export/import are as follows:

- TransportLogger.SEVERITY_INFO

- TransportLogger.SEVERITY_WARNING

- TransportLogger.SEVERITY_ERROR

7.2.8.2 Exporting Personalizations Example

This example illustrates the most basic case where you build a portlet and accept the default behavior for the export of personalizations. In the examples in Section 7.2.8.3.6, "Encrypting Personalization Data Example" and Section 7.2.8.3.7, "Exporting by Reference Example", you will see how to enhance the security of your personalizations during export and import. To implement the more basic form of exporting personalizations, do the following:

1. Create a stock portlet and implement the Show mode with the following MyStockPortletShowRenderer.java class. Note that this class does not incorporate any special code to enable export/import.

package oracle.portal.sample.v2.devguide.tx;
import java.util.StringTokenizer;
import oracle.portal.provider.v2.PortletException;
import oracle.portal.provider.v2.personalize.NameValuePersonalizationObject;
import oracle.portal.provider.v2.render.PortletRenderRequest;
import oracle.portal.provider.v2.render.PortletRendererUtil;
import oracle.portal.provider.v2.render.http.BaseManagedRenderer;
import java.io.PrintWriter;
import oracle.portal.sample.v2.devguide.webservices.
NetXmethodsServicesStockquoteStockQuoteServiceStub;
public class MyStockPortletShowRenderer extends BaseManagedRenderer
{
private String pid = null;
private String userdata;
private String stockList;
private String stockCode;
public void renderBody(PortletRenderRequest request) throws PortletException
{
// Use the PrintWriter from the PortletRenderRequest
PrintWriter out = null;
NetXmethodsServicesStockquoteStockQuoteServiceStub ns = new
NetXmethodsServicesStockquoteStockQuoteServiceStub();
try
{
out = request.getWriter();      NameValuePersonalizationObject data = null;
data = (NameValuePersonalizationObject)PortletRendererUtil.
getEditDefaultData(request);
stockList= data.getString("stock");
if(stockList!=null) {
StringTokenizer st = new  StringTokenizer(stockList,",");
out.println("<table border='0'>");
out.println("<thead>");
out.println("<tr>");
out.println("<th width='20%'>");
out.println("<p align='left'> Stock Code</p></th><th width='20%'>");
out.println("<p align='left'> Quote</p>");
out.println("</th>");
out.println("</tr>");
out.println("<thead>");
while(st.hasMoreElements()) {
stockCode= st.nextElement().toString();
out.println("<tr>");
out.println("<td width='20%'>");
out.println("<p align='left'>"+  stockCode +
"</p></td><td width='20%'>");
out.println(ns.getQuote(stockCode));
out.println("</td>");
out.println("</tr>");
}
out.println("</table>");
}
else
{
out.println("<br> Click <b>Edit Defaults</b> to define stock codes.");
}
}
catch(Exception ioe)
{
throw new PortletException(ioe);
}
}
}

2. Implement the Edit Defaults mode for your stock portlet with the following class, MyStockPortletEditDefaultsRenderer.java. This class enables the administrator to make and store default personalizations, which are then exported according to the default behavior.

package oracle.portal.sample.v2.devguide.tx;
import oracle.portal.provider.v2.PortletException;
import oracle.portal.provider.v2.http.HttpCommonConstants;
import oracle.portal.provider.v2.render.PortletRenderRequest;
import oracle.portal.provider.v2.render.http.BaseManagedRenderer;
import oracle.portal.provider.v2.render.PortletRendererUtil;
import oracle.portal.provider.v2.personalize.NameValuePersonalizationObject;
import java.io.PrintWriter;
import java.io.IOException;
import oracle.portal.provider.v2.render.http.HttpPortletRendererUtil;
public class MyStockPortletEditDefaultsRenderer extends BaseManagedRenderer
{
public void renderBody(PortletRenderRequest request) throws PortletException
{
PrintWriter out = null;
try
{
out = request.getWriter();
}
catch(IOException ioe)
{
throw new PortletException(ioe);
}

// Personalize the portlet title and stock
String actionParam = PortletRendererUtil.getEditFormParameter(request);
PortletRenderRequest prr = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String action = request.getParameter(actionParam);
String title = prr.getQualifiedParameter("myportlet_title");
String stock = prr.getQualifiedParameter("myportlet_stock");
NameValuePersonalizationObject data = null;
try
{
data = (NameValuePersonalizationObject)
PortletRendererUtil.getEditDefaultData(request);
}
catch(IOException io)
{
throw new PortletException(io);
}
// Cancel automatically redirects to the page, so
// will only recieve OK or APPLY
if (action != null)
{
data.setPortletTitle(title);
data.putString("stock",stock);
try
{
PortletRendererUtil.submitEditData(request, data);
}
catch(IOException ioe)
{
throw new PortletException(ioe);
}
return;
}
// Otherwise just render the form
title = data.getPortletTitle();
stock = data.getString("stock");
out.print("<table border='0'> <tr> ");
out.println("<td width='20%'> <p align='right'>Title:</p></td>
<td width='80%'>");
out.print("<input type='TEXT' name='" +
HttpPortletRendererUtil.portletParameter(prr, "myportlet_title")
+ "' value='" + title + "'>");
out.println("</td> </tr>");
out.print("<tr> <td width='20%'> <p align='right'>Stock Codes:</p></td>
<td width='80%'>");
out.print("<input type='TEXT' name='" +
HttpPortletRendererUtil.portletParameter(prr, "myportlet_stock")
+ "' value='" + stock + "'>");
out.println("<br> For example use US Stock Codes separated by comma:
<i> SUNW,IBM,ORCL</i>");
out.print("</td> </tr>");
out.println("</table>");
}
}

3. Create the following class, NetXmethodsServicesStockquoteStockQuoteServiceStub.java, for your stock portlet:

package oracle.portal.sample.v2.devguide.webservices;
import oracle.soap.transport.http.OracleSOAPHTTPConnection;
import org.apache.soap.encoding.SOAPMappingRegistry;
import java.net.URL;
import org.apache.soap.rpc.Call;
import org.apache.soap.Constants;
import java.util.Vector;
import org.apache.soap.rpc.Parameter;
import org.apache.soap.rpc.Response;
import org.apache.soap.Fault;
import org.apache.soap.SOAPException;
import java.util.Properties;
public class NetXmethodsServicesStockquoteStockQuoteServiceStub
{
public NetXmethodsServicesStockquoteStockQuoteServiceStub()
{
m_httpConnection = new OracleSOAPHTTPConnection();
m_smr = new SOAPMappingRegistry();
}
private String _endpoint = "http://64.124.140.30:9090/soap";
public String getEndpoint()
{
return _endpoint;
}
public void setEndpoint(String endpoint)
{
_endpoint = endpoint;
}
private OracleSOAPHTTPConnection m_httpConnection = null;
private SOAPMappingRegistry m_smr = null;
public Float getQuote(String symbol) throws Exception
{
Float returnVal = null;
URL endpointURL = new URL(_endpoint);
Call call = new Call();
call.setSOAPTransport(m_httpConnection);
call.setTargetObjectURI("urn:xmethods-delayed-quotes");
call.setMethodName("getQuote");
call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
Vector params = new Vector();
params.addElement(new Parameter("symbol", String.class, symbol, null));
call.setParams(params);
call.setSOAPMappingRegistry(m_smr);
Response response = call.invoke(endpointURL,
"urn:xmethods-delayed-quotes#getQuote");
if (!response.generatedFault())
{
Parameter result = response.getReturnValue();
returnVal = (Float)result.getValue();
}
else
{
Fault fault = response.getFault();
throw new SOAPException(fault.getFaultCode(), fault.getFaultString());
}
return returnVal;
}
public void setMaintainSession(boolean maintainSession)
{
m_httpConnection.setMaintainSession(maintainSession);
}
public boolean getMaintainSession()
{
return m_httpConnection.getMaintainSession();
}
public void setTransportProperties(Properties props)
{
m_httpConnection.setProperties(props);
}
public Properties getTransportProperties()
{
return m_httpConnection.getProperties();
}
}

4. Create a Web provider through provider.xml for this portlet. Notice the use of the <preferenceStore> element to allow for the storing of personalizations:

<provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
<session>false</session>
<passAllUrlParams>false</passAllUrlParams>
<preferenceStore class="oracle.portal.provider.
v2.preference.FilePreferenceStore">
<name>prefStore1</name>
<useHashing>true</useHashing>
</preferenceStore>
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>1</id>
<name>MyStockPortlet</name>
<title>My Stock Portlet</title>
<description>Simple Stock Portlet to show Export and Import
feature of web providers</description>
<timeout>80</timeout>
<showEditToPublic>false</showEditToPublic>
<hasAbout>false</hasAbout>
<showEdit>false</showEdit>
<hasHelp>false</hasHelp>
<showEditDefault>true</showEditDefault>
<showDetails>false</showDetails>
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<renderContainer>true</renderContainer>
<renderCustomize>true</renderCustomize>
<autoRedirect>true</autoRedirect>
<contentType>text/html</contentType>
<showPage class="oracle.portal.sample.v2.
devguide.tx.MyStockPortletShowRenderer"/>
<editDefaultsPage class="oracle.portal.sample.v2.devguide.tx.
MyStockPortletEditDefaultsRenderer"/>
</renderer>
<personalizationManager class="oracle.portal.provider.v2.personalize.
PrefStorePersonalizationManager">         <dataClass>oracle.portal.provider.v2.personalize.
NameValuePersonalizationObject
</dataClass>
</personalizationManager>
</portlet>
</provider>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

5. Register this export-enabled provider with the source Oracle Portal instance. For more information about registering Web providers, refer to Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet".

Note:

If the Web provider is running in a secured environment, remember to provide the proxy host and port while starting up Oracle WebLogic Server. For example:

JAVA_OPTIONS=“-Dhttp.proxyHost=www-proxy.us.oracle.com -Dhttp.proxyPort=80

6. Create two regions on a sample page and add My Stock Portlet to the first region. For information on creating regions and pages, refer to the Oracle Fusion Middleware User's Guide for Oracle Portal.

7. Edit the page and click the Edit Defaults icon for My Stock Portlet. Choose the stock codes SUNW,IBM,ORCL. For more information on how to edit defaults for a portlet on a page, refer to the Oracle Fusion Middleware User's Guide for Oracle Portal.

8. Add My Stock Portlet to a second region and again edit the defaults. Use a different stock code this time, MSFT.

9. Export the page group containing this page. For instructions on how to export a page group, refer to Chapter 10, "Exporting and Importing Content," in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

10. Import the page group into a target Oracle Portal instance. For instructions on how to import a page group, refer to Chapter 10, "Exporting and Importing Content," in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

11. View the page with My Stock Portlet in the target Oracle Portal instance and ensure that the personalizations were maintained.

7.2.8.3 Implementing Security for Export/Import

Transporting personalizations can present a security concern if your portlet stores sensitive data and is not operating in a secured environment. At the provider and portlet level, Oracle Portal provides several ways for you to secure the export and subsequent import of portlet personalizations. To better secure portlets and providers for exportation and importation, you can take the following actions:

- Section 7.2.8.3.1, "Securing Provider Communications". Using Oracle Portal configuration options, you can secure the communications between providers and Oracle Portal. This step in turn makes the export and import of portlets more secure.

- Section 7.2.8.3.2, "Disabling Export/Import of Personalizations". You can disable the export of all portlet personalization data for each Web application. This method provides the greatest security but only at a significant cost in functionality because it prevents administrators from retaining their default personalizations when the portlet is moved.

- Section 7.2.8.3.3, "Obfuscating Data for Transport (Automatic)". By default, Oracle Portal obfuscates but does not encrypt personalization data before transporting it.

- Section 7.2.8.3.4, "Encrypting Personalization Data for Transport". You may want to encrypt personalization data for transport if any of the following are true:

- Your Web provider connection is not secured using HTTPS.

- You want to ensure the data is secured during transit.

- You want the data to remain secure while stored in the Oracle Portal instance.

- Section 7.2.8.3.5, "Exporting by Reference". Instead of including portlet personalization data directly in the transport set, you can include it by reference in the transport set. Because the data itself is not present in the transport set, export by reference is the most secure way of transporting personalizations.

7.2.8.3.1 Securing Provider Communications

If the security of exporting/importing portlets is of concern to you, you should configure Oracle Portal to secure communications with your portlet providers. The chief mechanisms for securing provider communications in Oracle Portal are as follows:

- Message authentication through a Hashed Message Authentication Code (HMAC) algorithm. For more information on message authentication for providers, refer to Section 6.1.7.8, "Message Authentication", in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

- HTTPS between providers and Oracle Portal. For more information on HTTPS for provider communications, refer to Section 6.1.7.9, "HTTPS Communication", in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Note:

You cannot use certificates for the HTTPS communication with providers.

7.2.8.3.2 Disabling Export/Import of Personalizations

The JNDI variable, oracle/portal/provider/global/transportEnabled, controls whether to allow the exportation and importation of personalizations. If you set the variable to true, personalizations are transported as part of export and import. If you set it to false, they are not transported. You can set JNDI variables for PDK-Java through a Deployment Plan set on the PDK-Java web application in the Oracle WebLogic Server. This can be done using the WebLogic Server Administration Console. Deployment Plans allow for easy modification of an application's configuration, without modifying the packaged deployment descriptor files. After setting up the Deployment Plan, you can make manual changes to it for the JNDI variable within the pre-existing WEB-INF/web.xml module descriptor, like the following:

<module-descriptor external="false">
<root-element>web-app</root-element>
<uri>WEB-INF/web.xml</uri>
<variable-assignment>
<name>provider_transportEnabled</name>        <xpath>/web-app/env-entry/[env-entry-name=&quot;oracle/portal/provider/global/transportEnabled&quot;]/env-entry-value</xpath>
</variable-assignment>
</module-descriptor>

The variable definition of this variable assignment is made directly under the <deployment-plan> tag, and will look like:

<variable-definition>
<variable>
<name>provider_transportEnabled</name>
<value>false</value>
</variable>
</variable-definition>

This sets oracle/portal/provider/global/transportEnabled to false.

See:

Oracle Fusion Middleware Deploying Applications to Oracle WebLogic Server

7.2.8.3.3 Obfuscating Data for Transport (Automatic)

By default, personalization data is encoded (Base64). This encoding ensures that data is obfuscated during transport. You do not need to take any actions to leverage Base64 encoding as it is provided by default. However, if you want greater security, you can encrypt the data. Refer to Section 7.2.8.3.4, "Encrypting Personalization Data for Transport".

7.2.8.3.4 Encrypting Personalization Data for Transport

By implementing the oracle.portal.provider.v2.security.CipherManager class for your provider, you can encrypt the personalization data prior to exporting it. Upon import, the cipher manager is invoked again to decrypt the data. Refer to Section 7.2.8.3.6, "Encrypting Personalization Data Example".

Note:

If you choose to encrypt your Web providers for export using the cipher manager, you must also devise your own key management strategy for the encryption algorithm.

7.2.8.3.5 Exporting by Reference

As mentioned previously, the default behavior for exporting of portlets is to include the actual personalization data in the transport set. For a more secure transport, you can code your portlet such that the personalizations are exported using pointers rather than by including the actual preference data. When the transport set is imported, the target Oracle Portal instance sends the pointer back to the Web provider, which then has the opportunity to reassociate the actual data with the new portlet instance. Refer to Section 7.2.8.3.7, "Exporting by Reference Example".

Note:

When exporting across security zones, exporting by reference may not work effectively. In general, you should only employ export by reference when transporting within the same general security environment.

7.2.8.3.6 Encrypting Personalization Data Example

To encrypt personalization data in your Web provider, you need to create your own cipher manager and associate it with your portlet provider. This example provides a simple, insecure cipher manager for illustrative purposes only. To implement a secure implementation of the cipher manager for your production system, you would need to significantly extend this sample. Some of the issues you would need to consider for a production implementation are as follows:

- Do not hold the key object in memory. Read it from a persistent store as necessary.

- Use the provider's PreferenceStore API supported by a DBPreferenceStore to work in the clustered case.

- On import, if the cipher manager instance obtained from provider.xml matches the class name returned in the SOAP message, that CipherManager instance is used to perform the decryption. Hence, the instance maintained in the portlet/provider definition may be configured using any applicable means (for example, tags in provider.xml or JNDI variable) and that configuration is reused on import.

To encrypt personalization data in your Web provider, do the following:

Note:

The following sample is for illustrative purposes only. You would need to significantly enhance it for use in a production environment.

1. Create a cipher manager class, InsecureCipherManager. This class will be used for encryption and decryption of personalization data exported from or imported to a Web provider. A base64 encoded, hard coded secret key is used with the DES algorithm supplied by the default javax.crypto provider of the underlying Java Runtime Environment. As a result, this particular sample is insecure because the encoded key can be recovered by a malicious party simply by decompiling the byte code.

Note:

This sample makes use of the javax.crypto package, which is optional in Java 1.3 and must be installed manually. In Java 1.4, though, this package is present by default.

package oracle.portal.sample.v2.devguide.tx;
import java.io.IOException;
import java.security.GeneralSecurityException;
import javax.crypto.Cipher;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.DESKeySpec;
import oracle.portal.provider.v2.ProviderException;
import oracle.portal.provider.v2.security.CipherManager;
import sun.misc.BASE64Decoder;
public final class InsecureCipherManager implements CipherManager
{
/**
* Base64 encoded external form of a javax.crypto.SecretKey which was
* generated for the DES algorithm. This is completely insecure! Anyone
* can decompile the bytecode and recostitue the key. A more secure
* implementation would implement a key management policy in a
* java.security.KeyStore.
*/
private static final String sEncodedKey = "UTJds807Arw=";
/**
* Generated from the (insecure) encoded form in sEncodedKey.
*/
private SecretKey mKey;
/**
* Transforms the input data to a more secure form, in a single operation,
* using the DES cryptographic algorithm along with a statically defined
* secret key.
* @param toEncode the input data.
* @return an encoded form of the input data.
* @throws ProviderException if an error occurs during transform.
*/
public final byte[] encode(byte[] toEncode) throws ProviderException
{
try
{
Cipher c = Cipher.getInstance("DES");
c.init(Cipher.ENCRYPT_MODE, getSecretKey());
return c.doFinal(toEncode);
}
catch (GeneralSecurityException gse)
{
throw new ProviderException(gse);
}
catch (IOException ioe)
{
throw new ProviderException(ioe);
}
}
/**
* Transforms the input data to its original form, in a single operation,
* using the DES cryptographic algorithm along with a statically defined
* secret key.
* @param toDecode the input data.
* @return a decoded form of the input data.
* @throws ProviderException if an error occurs during transform.
*/
public final byte[] decode(byte[] toDecode) throws ProviderException
{
try
{
Cipher c = Cipher.getInstance("DES");
c.init(Cipher.DECRYPT_MODE, getSecretKey());
return c.doFinal(toDecode);
}
catch (GeneralSecurityException gse)
{
throw new ProviderException(gse);
}
catch (IOException ioe)
{
throw new ProviderException(ioe);
}
}
/**
* Returns a <code>javax.crypto.SecretKey</code> deserialized from the
* obuscated form in sEncodedKey. Note, this is highly insecure!!
*/
private SecretKey getSecretKey()
throws GeneralSecurityException, IOException
{
if (mKey == null)
{
DESKeySpec ks = new DESKeySpec((new BASE64Decoder()).decodeBuffer(
sEncodedKey));
SecretKeyFactory skf = SecretKeyFactory.getInstance("DES");
mKey = skf.generateSecret(ks);
}
return mKey;
}
}

2. Modify your provider.xml to reference the cipher manager:

<?xml version = '1.0' encoding = 'UTF-8'?>
<?providerDefinition version="3.1"?>
<provider class="oracle.portal.provider.v2.DefaultProviderDefinition">
<providerInstanceClass>net.mzyg.tx.TxProviderInstance</providerInstanceClass>
<session>false</session>
<passAllUrlParams>false</passAllUrlParams>
<preferenceStore class="oracle.portal.provider.v2.
preference.DBPreferenceStore">
<name>prefStore1</name>
<connection>java:comp/env/jdbc/PortletPrefs</connection>
</preferenceStore>
<cipherManager class="oracle.portal.sample.v2.devguide.tx.
InsecureCipherManager"/>

7.2.8.3.7 Exporting by Reference Example

To export by reference rather than exporting the actual personalization, do the following:

1. Override the DefaultPortletInstance with the following ExportByRefDefaultPortletInstance:

package oracle.portal.sample.v2.devguide.tx;
import oracle.portal.provider.v2.DefaultPortletInstance;
import oracle.portal.provider.v2.preference.PreferenceStore;
import oracle.portal.provider.v2.transport.PrefStoreTransporter;
public class ExportByRefDefaultPortletInstance extends DefaultPortletInstance
{
/**
* Returns a {@link oracle.portal.provider.v2.transport.PrefStoreTransporter}
* capable of carrying out transport operations such as export/import on
* data applicable to {@link oracle.portal.provider.v2.PortletInstance}
* persisted in {@link oracle.portal.provider.v2.preference.PreferenceStore}.
* This implementation returns an {@link ExportByRefPrefStoreTransporter}.
* @param ps the {@link oracle.portal.provider.v2.preference.PreferenceStore}
* containing the data to be transported.
* @return a {@link oracle.portal.provider.v2.transport.PrefStoreTransporter}
*/
protected PrefStoreTransporter getPrefStoreTransporter(PreferenceStore ps)
{
return new ExportByRefPrefStoreTransporter(ps);
}
}

2. Create the ExportByRefPrefStoreTransporter class referenced in ExportByRefDefaultPortletInstance. This class implements an alternative preference store transporter that does not send preference data during the export operation. Instead, it writes the context path of the source preference to the stream. During the export, it reads the context path and uses that path to look up the preference data and copy it to the new instance. This method of exporting by reference assumes that the source and target providers have access to the same preference store. In fact, the best case for this example would be the situation where the source and target providers are the same.

package oracle.portal.sample.v2.devguide.tx;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.io.DataInputStream;
import java.io.DataOutputStream;
import oracle.portal.provider.v2.transport.PrefStoreTransporter;
import oracle.portal.provider.v2.transport.TransportLogger;
import oracle.portal.provider.v2.preference.Preference;
import oracle.portal.provider.v2.preference.PreferenceStore;
import oracle.portal.provider.v2.preference.PreferenceStoreException;
public class ExportByRefPrefStoreTransporter extends PrefStoreTransporter
{
public ExportByRefPrefStoreTransporter(PreferenceStore prefStore)
{
super(prefStore);
}
/**
* Exports the context path of the supplied {@link
* oracle.portal.provider.v2.preference.Preference} from the {@link
* oracle.portal.provider.v2.preference.PreferenceStore}.
* @param pref the source {@link
* oracle.portal.provider.v2.preference.Preference}
* @param out the <code>java.io.OutputStream</out> to which data will be
* written.
* @param logger
*/
protected void exportPreference(Preference pref, OutputStream out,
TransportLogger logger) throws PreferenceStoreException, IOException
{
// Get the context path of the preference we are exporting.
String contextPath = pref.getContextPath();
DataOutputStream dos = new DataOutputStream(out);
// Write the context path in the export data. The import process
// will use this context path to lookup this preference in the
// preference store and copy it to the new context
dos.writeUTF(contextPath);
}
/**
* Reads a context path from the stream and copies preference data
* from that location into the {@link
* oracle.portal.provider.v2.preference.PreferenceStore}.
* @param pref the target {@link
* oracle.portal.provider.v2.preference.Preference}
* @param in the <code>java.io.InputStream</code> from which to read data.
* @param logger
*/
protected void importPreference(Preference pref, InputStream in,
TransportLogger logger) throws PreferenceStoreException, IOException
{
// Read the context path to copy the value for this
// preference from.
DataInputStream dis = new DataInputStream(in);
String contextPath = dis.readUTF();
// Create preference object to copy from (identical to the
// target preference but with a different context path)
Preference sourcePref = new Preference(contextPath,
pref.getName(), pref.getType(), (String)null);
// Copy across the preference
getPrefStore().copy(sourcePref, pref, true);
}
}

3. Update provider.xml to include the following element for your portlet:

<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
...
<portletInstanceClass>oracle.portal.sample.v2.devguide.tx.
ExportByRefDefaultPortletInstance</portletInstanceClass>
</portlet>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

7.2.9 Enhancing Portlet Performance with Caching

In the previous sections of this chapter, you learned how to write fully-functional Java portlets using the PDK Framework. Once you complete the basic functionality of your portlet, you may want to turn your attention to portlet performance.

Caching is a common technique for enhancing the performance of Web sites that include a great deal of dynamic content. The overhead involved in retrieving data and generating the output for dynamic content can be significantly reduced by proxying requests through a local agent backed by a large, low-latency data store known as a cache. The cache agent responds to a request in one of two ways, as follows:

- If a valid version of the requested content exists in the cache, the agent simply returns the existing cached copy, thus skipping the costly process of content retrieval and generation. This condition is called a cache hit.

- If a valid version of the requested content does not exist in the cache, the agent forwards the request to its destination and awaits the return of the content. The agent returns the content to the requestor and stores a local copy in its cache for reuse if a subsequent request for the same content arises. This condition is called a cache miss.

Web providers generate dynamic content (that is, portlets) and they often reside remotely from the Oracle Portal instance on which they are deployed. As such, caching might improve their performance. The architecture of Oracle Portal lends itself well to caching, since all rendering requests originate from a single page assembling agent, known as the Parallel Page Engine (PPE), which resides on the middle tier. You can make the PPE cache the portlets rendered by your Web provider and reuse the cached copies to handle subsequent requests, minimizing the overhead your Web provider imposes on page assembly.

The Web provider can use any one of three different caching methods, depending upon which one is best suited to the application. The methods differ chiefly in how they determine whether content is still valid. Following are the three caching methods:

1. Expiry-based Caching: When a provider receives a render request, it stamps its response with an expiry time. The rendered response remains in the cache and fills all subsequent requests for the same content until its expiry time passes. This caching scheme is perhaps the simplest and most performant because the test for cache validity requires very little overhead and does not involve any network round trips. Expiry-based caching suits applications where the content has a well-defined life span. For content with a less certain life span, however, expiry-based caching is less effective. Refer to Section 7.2.9.2, "Activating Caching" and Section 7.2.9.3, "Adding Expiry-Based Caching" for more information.

2. Invalidation-based Caching: Invalidation-based caching works essentially the same way as expiry-based caching, except that the contents of the cache can expire or become invalid at any time. Invalidation of cache content is usually triggered by an event.
For example, if you have a calendar portlet that shows your appointments for the day, the content for the portlet could be generated once, the first time you show the calendar for that day. The content remains cached until something happens to change your schedule for that day, such as the addition of an appointment, the deletion of an existing appointment, or a change of time for an appointment. Each of these change events can trigger an action in the calendar application. When such an event takes place, your calendar application can generate an invalidation request for any cached portlet content affected by the change. The next time you view a page containing your calendar portlet, the cache will not contain an entry. Your Web provider will be contacted to regenerate the new content with the modified schedule.

This method is a very efficient way to cache content because the originator of the content, that is, your Web provider, is contacted only when new content needs to be generated, but you are not bound to a fixed regeneration schedule. Refer to Section 7.2.9.2, "Activating Caching" and Section 7.2.9.4, "Adding Invalidation Based Caching" for more information.

3. Validation-based Caching: When a provider receives a render request, it stamps its response with a version identifier (or E Tag). The response goes into the cache, but, before the PPE can reuse the cached response, it must determine whether the cached version is still valid. It sends the provider a render request that includes the version identifier of the cached content. The provider determines whether the version identifier remains valid. If the version identifier is still valid, the provider immediately sends a lightweight response to the PPE without any content, which indicates the cached version can be used. Otherwise, the provider generates new content with a new version identifier, which replaces the previously cached version. In this form of caching, the PPE must always confirm with the provider whether the content is up to date. The validity of the cached copy is determined by some logic in the provider. The advantage of this approach is that the provider controls the use of the cached content rather than relying on a fixed period of time. Refer to Section 7.2.9.2, "Activating Caching" and Section 7.2.9.5, "Adding Validation-Based Caching" for more information.

7.2.9.1 Assumptions

To perform the tasks in these sections, we are making the following assumptions:

1. You have followed through and understood Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

2. You built a portlet using the wizard and successfully added it to a page.

7.2.9.2 Activating Caching

To use the caching features of Oracle Portal in your Web providers, you must first activate the middle tier cache. This cache is known as the PL/SQL Cache because it is the same cache used by mod_plsql, the Oracle HTTP Server plug-in that calls database procedures, and hence database providers, over HTTP.

Usually, your OracleAS Portal administrator is responsible for the configuration details of caching.

For invalidation-based caching, you need to configure Oracle Web Cache in front of the Web provider. Bear in mind that remote Web providers often do not have Oracle Web Cache installed. For more information about Oracle Web Cache, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Web Cache.

Once you have installed and configured Oracle Web Cache, ensure the following in the Oracle Web Cache Manager:

- It points to the host name and port of the Web provider.

- Caching rules do not cause the caching of provider content. Content should be cached according to the surrogate control headers generated by the provider in its response.

7.2.9.3 Adding Expiry-Based Caching

Expiry-based caching is one of the simplest caching schemes to implement, and can be activated declaratively in your XML provider definition. You can set an expiry time for the output of any ManagedRenderer you utilize by setting its pageExpires property to the number of minutes you want the output to be cached for. For example, suppose you want portlet output to be cached for one minute. To add expiry-based caching, perform the following steps:

1. After you have used the Portlet Wizard to build a portlet as described in Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper", edit the provider.xml file and set the pageExpires property tag of showPage to 1. This will set an expires entry of 1 minute for the portlet.
By default the wizard generates a standard and compressed tag for showPage. You need to expand the tag to include a subtag of pageExpires:

<showPage class="oracle.portal.provider.v2.render.http.ResourceRenderer">
<resourcePath>/htdocs/mycacheportlet/MyCachePortletShowPage.jsp
</resourcePath>
<pageExpires>1</pageExpires>
</showPage>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

2. Test that the portlet is cached for 1 minute by adding some JSP code to your show page. You can simply add the current time to your JSP.

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="java.util.Date"
import="java.text.DateFormat"
%>

<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
DateFormat df = DateFormat.getDateTimeInstance(DateFormat.LONG,
DateFormat.LONG,pReq.getLocale());
String time = df.format(new Date());
%>

<P>Hello <%=pReq.getUser().getName() %>.</P>
<P>This is the <b><i>Edit</i></b> render mode!</P>
<P>This information is correct as of <%=time%>.</P>

When viewing the portlet, you see that the time (including seconds) is constant for 1 minute. After the time has expired, the portlet displays the most current time and a new cache is set.

7.2.9.4 Adding Invalidation Based Caching

When using Oracle Web Cache, requests for content are sent using HTTP and content is either returned from the cache or the HTTP request is forwarded to the originator of the content. When content is returned to Oracle Web Cache, it is added to the cache before being returned to the requestor. Cache content is invalidated by sending invalidation requests directly to Oracle Web Cache. PDK-Java uses the Java API for Web Cache (JAWC) to generate invalidation requests. This section describes how to configure Oracle Web Cache and use the invalidation-based caching sample that comes with PDK-Java.

Not all requests sent to Oracle Web Cache are cached. In order for the content to be cached, the content must include directives that tell Oracle Web Cache to cache the content. Usually Oracle Web Cache uses the URL associated with the request as the cache key, but you can specify additional keys by setting special HTTP headers, known as surrogate control headers, on the response.

To configure a Java portlet to use invalidation-based caching, you do the following:

- Configuring Oracle Web Cache. Refer to Oracle Fusion Middleware Administrator's Guide for Oracle Web Cache for more information.

- Section 7.2.9.4.1, "Configuring the Provider Servlet"

- Section 7.2.9.4.2, "Defining the Oracle Web Cache Invalidation Port"

- Section 7.2.9.4.3, "Configuring the XML Provider Definition"

- Section 7.2.9.4.4, "Manually Invalidating the Cache"

7.2.9.4.1 Configuring the Provider Servlet

To enable invalidation-based caching, you must switch it on at the provider servlet level. The flag is set in an initialization parameter inside the PDK-Java Web application deployment descriptor, web.xml. For example:

<servlet>
...
<servlet-class>oracle.webdb.provider.v2.adapter.SOAPServlet</servlet-class>
<init-param>
<param-name>invalidation_caching</param-name>
<param-value>true</param-value>
</init-param>
</servlet>

If the flag is not defined here, then invalidation-based caching is switched off. The status of this flag can be checked by displaying the provider's test page. If the testPageURI property is not set in the sample.properties file, then the provider code displays the test page in the old default style. The old style test page correctly picks up the invalidation caching flag from the web.xml file. The format of the test page URL is as follows:

http://provider_hostname:port/jpdk/providers/sample

7.2.9.4.2 Defining the Oracle Web Cache Invalidation Port

If you are using an Oracle Application Server installation type where PDK-Java was automatically pre-installed (for example, an Oracle Portal and Wireless type installation), you should find that Oracle Web Cache invalidation settings have already been preconfigured in MID_TIER_ORACLE_HOME/portal/conf/cache.xml. In this case, you can safely ignore the instructions in this section and proceed to Section 7.2.9.4.3, "Configuring the XML Provider Definition". Otherwise, you will need to configure the invalidation portlet for Oracle Web Cache.

First, you need the user name and password for the invalidation port(s) of the Oracle Web Cache instance(s) associated with your application server. After you obtain those, use the provided oracle.webdb.provider.v2.cache.Obfuscate Java utility to convert the user name and password into an obfuscated string of the format required by the JAWC API. In a default Oracle Application Server installation, the user name for the invalidation port is usually invalidator and the password is usually the same as the application server administrator's password. For example, suppose you installed Oracle Application Server in D:\as904, with an invalidation port user name of invalidator and a password of welcome. You would run the following command:

Note:

The command that follows assumes that pdkjava.jar and jawc.jar are present in ORACLE_HOME/j2ee/home/shared-lib/oracle.jpdk/1.0, as required by the PDK-Java installation guide.
If you are using a standalone Oracle Containers for Java EE installation, you need to substitute in the path to the java executable an external Java 2 SDK installation.

D:\as904\jdk\bin\java -classpath D:\as904\j2ee\home\shared-lib\oracle.jpdk\1.0\pdkjava.jar
oracle.webdb.provider.v2.cache.Obfuscate invalidator:welcome

If successful, the command should print a hexadecimal string like the following:

0510198d5df8efd5779406342be2528aa0cccb179ea6b77baf49f019f5075a3a11

Now, use this information to create a JAWC configuration file, cache.xml, which specifies one or more Oracle Web Cache instances and their invalidation ports. For example:

<?xml version="1.0"?>
<webcache>
<invalidation
host="cache.mycompany.com"
port="4001"
authorization="0510198d5df8efd5779406342be2528aa0cccb179ea6b77baf49f019f5075a3a11"/>
</webcache>

JAWC finds this configuration file using the system property file. To set this system property for a Oracle WebLogic Server, simply add an appropriate line to the .product.properties file for the particular instance in which PDK-Java is installed (for example, MW_HOME/wlserver_10.3/.product.properties) and then restart that instance.

Note:

Since the location of the cache configuration file is defined as a system property, only one cache may be defined for each server instance. It is not possible to have two different Web Provider instances behind separate Oracle Web Cache configurations.

7.2.9.4.3 Configuring the XML Provider Definition

Using a combination of tags in provider.xml, you can activate automatic invalidation-based caching for an entire portlet or some of its pages. To turn on automatic invalidation-based caching, you need to declare it as follows either at the level of individual pages or the renderer, to indicate that invalidation-based caching should be activated for all pages:

<useInvalidationCaching>true</useInvalidationCaching>

If your portlet supports personalization (through the Edit or Edit Defaults modes), you may also want to declare <autoInvalidate>true</autoInvalidate> for your renderer. This declaration causes invalidation of all the cached content for the portlet when you click OK or Apply in Edit mode, thus causing new markup to be generated based on the personalized settings.

The maximum time for holding the page in the cache is the minimum of the following:

- Maximum expiry time from Oracle Portal defined in the Cache tab of the Global Settings page.

- Web Provider default (24 hours) if no maximum expiry time is specified by Oracle Portal.

- The time in minutes of the <pageExpires> tag, if present.

The following excerpt from provider.xml specifies that this portlet shall be cached for up to 5 minutes and shall be automatically invalidated upon personalization:

<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/html</contentType>
<renderContainer>true</renderContainer>
<autoRedirect>true</autoRedirect>
<autoInvalidate>true</autoInvalidate>
<showPage class="oracle.portal.provider.v2.render.http.ResourceRenderer">
<resourcePath>/htdocs/invalidation/invalidation1.jsp</resourcePath>
<useInvalidationCaching>true</useInvalidationCaching>
<pageExpires>5</pageExpires>
</showPage>
<editPage class="oracle.portal.sample.v2.devguide.invalidation.
InvalidationEditRenderer"/></renderer>

Note:

The pageExpires tag is also used for normal expiry based caching. These two forms of caching are mutually exclusive. Invalidation-based caching takes place in an Oracle Web Cache instance located in the same place as the Web provider. Pages stored using expiry based caching are cached in the middle tier of Oracle Portal.

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

7.2.9.4.4 Manually Invalidating the Cache

You may want the cached version of the portlet invalidated when a request is processed or information somewhere has been updated. In these cases, you may want to manually invalidate the cache.

The invalidation-based caching portlet sample included with PDK-Java contains a single portlet that displays the time the content was cached and a link to trigger an invalidation request. The first time a page request is made to the Web provider through the cache, the response is cached. Subsequent requests for the portlet content are fulfilled by returning content from Oracle Web Cache. When you click the link at the bottom of the portlet an invalidation request is generated by the provider that removes the portlet from the cache. The next request for the portlet is forwarded to the provider and the provider generates a new portlet with the current time.

To perform invalidation calls to Oracle Web Cache, first you need to have a handle to a ServletInvalidationContext object. You can get this handle by calling the static getServletInvalidationContext() method of the ServletInvalidationContextFactory class.

Once you have the handle, you need to specify the cache key. In the cache key, you need to specify whether you want to invalidate a particular portlet instance, all the instances of a portlet, or all the portlets managed by a provider. To perform this task, you use the methods of the ServletInvalidationContext class or the methods of its super class, InvalidationContext. This is where you can specify whether the portlet should be cached for this particular user (USER level). If there is no user specified in the cache key, then the cached content is returned to all users, which means you are using SYSTEM level caching.

The following example invalidates a portlet instance and calls the setFullProviderPath() and setPortletReference() methods. When the caching key is set, you call the invalidate() method on the InvalidationContext object that sends the invalidation message to Oracle Web Cache.

ServletInvalidationContext inv =
ServletInvalidationContextFactory.getServletInvalidationContext();
inv.setFullProviderPath
((ServletPortletRenderRequest)pReq);
inv.setPortletReference
(pReq.getPortletReference());
int num = inv.invalidate();

Review the Web cache sample provider for more information.

7.2.9.5 Adding Validation-Based Caching

Adding validation-based caching requires slightly more effort, but gives you explicit control over exactly which requests to your provider are cache hits. As an example, you may want to update the cache only when data within the portlet has changed. To implement this algorithm, you need to override the prepareResponse method. The signature of the BaseManagedRenderer.prepareResponse method is:

public boolean prepareResponse(PortletRenderRequest pr)
throws PortletException,
PortletNotFoundException

In your version of prepareResponse(), you need to do the following:

- Retrieve the cached version identifier set by the PPE in the render request by calling the HttpPortletRendererUtil.getCachedVersion() method:

public static java.lang.String getCachedVersion
(PortletRenderRequest request)

- If the portlet finds the previously cached version valid, the appropriate header has to be set by calling the HttpPortletRendererUtil.useCachedVersion() method. It also instructs the RenderManager that it won't be necessary to call renderBody() to render the portlet body.

public static void useCachedVersion(PortletRenderRequest request)

Otherwise, use HttpPortletRendererUtil.setCachedVersion() to generate a new version of the portlet, which will be cached. It also indicates to the PPE that the renderBody() method has to be called to regenerate the portlet content.

public static void setCachedVersion(PortletRenderRequest request,
java.lang.String version,
int level)
throws java.lang.IllegalArgumentException

For validation-based caching, you need not update provider.xml. You can view the portlet by refreshing the page or adding the portlet to a page and updating the content. If the content has changed, the portlet shows the new content. If the content has not changed, a cached version of the portlet is displayed.

7.2.10 Enhancing Portlets for Mobile Devices

This section explains how to go about enhancing a PDK-Java portlet for a mobile device. Before proceeding with this section, you should familiarize yourself with the guidelines for building mobile-enabled portlets, Section 6.1.4, "Guidelines for Mobile Portlets", and the methods of building portlets with PDK-Java, Section 7.2, "Enhancing PDK-Java Portlets".

To properly build a portlet for a mobile device, do the following:

1. Create a JSP to generate the OracleAS Wireless XML in response to the show request for the portlet. The portlet's JSPs are managed and controlled by the built in renderer, oracle.portal.provider.v2.render.http.ResourceRenderer.
With this renderer, you can define distinct resources (JSPs) for each Show mode as well as which JSP to call for each Show mode. Hence, you can define one JSP to handle the Show mode when the requested content is HTML and another when the requested content is OracleAS Wireless XML. For example, this capability enables you to put the lottery portlet's mobile rendition in a separate JSP. In this sample, mlotto.jsp generates the mobile rendition.

Note the contentType declaration in the first line of the source code. The content type of the JSPs response is set to text/vnd.oracle.mobilexml. This is the MIME type name for OracleAS Wireless XML. All mobile responses must set their content type to this value to work properly.

<%@ page session="false" contentType="text/vnd.oracle.mobilexml" %>
<%@ page import="oracle.portal.sample.v2.devguide.lottery.LottoPicker" %>
<% LottoPicker picker = new LottoPicker();
picker.setIdentity(request.getRemoteAddr() ); %>
<SimpleText>
<SimpleTextItem />
<SimpleTextItem>Your numbers:</SimpleTextItem>
<SimpleTextItem />
<SimpleTextItem HALIGN="CENTER" >
<%
int [] picks = picker.getPicks();
for (int i = 0; i < picks.length; i++) {
out.print(picks[i] + " ");
}
out.println("");
%>
</SimpleTextItem>
</SimpleText>

2. Modify provider.xml by adding the acceptContentType tag in the portlet definition to indicate that the portlet can generate OracleAS Wireless XML responses. Each acceptContentType tag defines a distinct content type that the portlet can render. The value is the MIME type of the content. In this case the lottery portlet declares that it can generate HTML (text/html) and OracleAS Wireless XML (text/vnd.oracle.mobilexml).

<acceptContentType>text/html</acceptContentType>
<acceptContentType>text/vnd.oracle.mobilexml</acceptContentType>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

3. Declare the mapping of JSP renderers to Show modes in provider.xml.
You need to define a render handler for the pertinent Show modes by content type. One showPage declaration identifies a JSP that renders the HTML response and another one identifies the JSP that renders the OracleAS Wireless XML response. Note that the class attribute is now required, whereas, in a simpler case, it could allow the class to default. You express the association of a particular JSP to a particular content type through the resourcePath and contentType tags inside the showPage declaration as follows:

- resourcePath defines the JSP used to render this mode.

- contentType defines the response type of this JSP.

When the ResourceRenderer receives a show request for the lottery portlet it invokes lotto.jsp to render the HTML response and mlotto.jsp for OracleAS Wireless XML. The following code illustrates how you express this relationship in provider.xml:

<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/html</contentType>
<renderContainer>true</renderContainer>
<showPage
class="oracle.portal.provider.v2.render.http.ResourceRenderer">
<resourcePath>/htdocs/lottery/lotto.jsp</resourcePath>
<contentType>text/html</contentType>
</showPage>
<showPage
class="oracle.portal.provider.v2.render.http.ResourceRenderer">
<resourcePath>/htdocs/lottery/mlotto.jsp</resourcePath>
<contentType>text/vnd.oracle.mobilexml</contentType>
</showPage>
...
</renderer>

Note:

The ResourceRenderer (and any portlet) determines the type of request it has received by the request's Accept header. The Accept header is a standard HTTP header that defines the acceptable response types for a given request. It may be a list with multiple values if multiple content types are acceptable. When there are multiple values, they are listed in order from most to least preferred. Oracle Portal controls the values passed to the portlet in the Accept header. In the case of an HTML request, the Accept header is:

text/html, text/xml, text/vnd.oracle.mobilexml

These values indicate that Oracle Portal prefers an HTML response but also accepts XML and OracleAS Wireless XML.

For mobile requests, the Accept header is:

text/vnd.oracle.mobilexml, text/xml

These values indicate that Oracle Portal prefers OracleAS Wireless XML but also accepts general XML that contains a stylesheet reference that transforms to OracleAS Wireless XML.

The ResourceRenderer maps requested content type to the specific resource renderer by working through the Accept list in preference order. Once it finds a match between an acceptable response type and a registered renderer, it dispatches the request to the resource. For example, for HTML requests the ResourceRenderer will match the first entry, text/html, to the declaration that defines lotto.jsp as the text/html handler. Likewise, when a mobile request is received, the ResourceRenderer matches the first entry, text/vnd.oracle.mobilexml, to the declaration that defines mlotto.jsp as the text/vnd.oracle.mobilexml handler.

4. Declare a short title. A short title is the short form of a portlet's name and is for use where display space is limited. Specifically, Oracle Portal uses it when rendering portlets as menu items in the page menu generated in response to a mobile request. If the portlet has registered a short title, Oracle Portal uses that as the menu item label. Otherwise, it uses the portlet's standard title. To declare a short title, you include the shortTitle tag in the portlet's metadata section in provider.xml:

<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>2</id>
<name>Lottery</name>
<title>Lottery Portlet</title>
<shortTitle>Lottery</shortTitle>
...
</portlet>

5. Support short title personalization. Because the portlet's short title is presented to the user as the menu item label that references the portlet instance on the page, we recommend that all portlets allow users to personalize the short title. PDK-Java provides a base data class that manages both the short and standard title:

oracle.portal.provider.v2.personalize.NameValuePersonalizationObject

The NameValuePersonalizationObject manages both the title and short title. It contains methods for getting and setting the values. The personalization code is split into two parts, form display and form submit. The logic first acquires the current data personalization object. Next, it checks to see if this is a form submit. If so, it updates the values in the data personalization object, writes them back to the repository, and returns. PDK-Java subsequently redirects back to this same form but without the parameters that indicate it is a form submit causing the form to redisplay with the new values. In this situation, the JSP responds with the personalization page including the current personalization values.

We recommend that portlets use this class or subclass to inherit this base support. The only personalization the lottery sample supports is these two titles. Hence, it uses the NameValuePersonalizationObject class directly in custom.jsp:

<%@ page session="false" import="oracle.portal.provider.v2.*" %>
<%@ page import="oracle.portal.provider.v2.http.*" %>
<%@ page import="oracle.portal.provider.v2.render.*" %>
<%@ page
import="oracle.portal.provider.v2.personalize.NameValuePersonalizationObject"
%>
<%-- This page both displays the personalization form and processes it.
We display the form if there isn't a submitted title parameter,
else we apply the changes --%>
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String title = request.getParameter("lotto_title");
String sTitle = request.getParameter("lotto_short_title");
String actionParam =
PortletRendererUtil.getEditFormParameter(portletRequest);
String action = request.getParameter(actionParam);
NameValuePersonalizationObject data = (NameValuePersonalizationObject)
PortletRendererUtil.getEditData(portletRequest);
// Cancel automatically redirects to the page
//   -- so will only receive 'OK' or 'APPLY'
if (action != null) {
data.setPortletTitle(title);
data.setPortletShortTitle(sTitle);
PortletRendererUtil.submitEditData(portletRequest, data);
return;
}
// otherwise just render the form
title = data.getPortletTitle();
sTitle = data.getPortletShortTitle();
%>
<TABLE BORDER="0">
<TR>
<TD WIDTH="20%">
<P ALIGN="RIGHT">Title:
</TD>
<TD WIDTH="80%">
<INPUT TYPE="TEXT" NAME="lotto_title"
VALUE="<%= title %>" SIZE="20">
</TD>
</TR>
<TR>
<TD WIDTH="20%">
<P ALIGN="RIGHT">Short Title:
</TD>
<TD WIDTH="80%">
<INPUT TYPE="TEXT" NAME="lotto_short_title" VALUE="<%= sTitle %>"
SIZE="20" MAXLENGTH="20">
</TD>
</TR>
</TABLE>

6. Support the rendering of personalized short titles. Once you add short title personalization, a portlet must take responsibility for rendering the portlet as a menu item in the mobile page response. Because of the small screen displays on mobile devices, portlets aren't rendered together. Users are presented with a menu of links to portlets on a given page. The user navigates to each portlet through this menu to see the content. To better support this model, Oracle Portal provides Link mode, where portlets generate Link references to themselves.
For HTML requests, Link mode generates an anchor tag, a href. For mobile requests, Link mode generates a simpleHref tag. Currently, Oracle Portal only sends a Link mode request when assembling a mobile page response. Hence, you only need to support rendering the text/vnd.oracle.mobilexml content type for Link mode. If your portlet also has an HTML rendition, we recommend you also support HTML Link mode.

The lottery portlet example implements each Link rendition in a distinct JSP, as follows:

- milotto.jsp contains the code to generate a text/vnd.oracle.mobilexml Link response.

- anchorlotto.jsp contains the code to generate a text/html Link response.

The code for each is almost identical. Since the purpose of supporting Link mode is to render the personalized short title, the code first acquires the short title from the repository. It then generates the appropriate link tag for the requested markup. The acquired short title is rendered as the link's label. Since Oracle Portal is responsible for creating the URL that references any particular usage of a portlet on a page, Oracle Portal creates the URL used in the link and passes it to the portlet, which then uses the URL to create the link. The URL for the link is retrieved from the request's PageURL parameter. The code for milotto.jsp is as follows:

<%@ page session="false" contentType="text/vnd.oracle.mobilexml" %>
<%@ page import="oracle.portal.provider.v2.http.HttpCommonConstants" %>
<%@ page import="oracle.portal.provider.v2.render.*" %>
<%@ page
import="oracle.portal.provider.v2.personalize.NameValuePersonalizationObject"
%>
<%@ page import="oracle.portal.utils.xml.v2.XMLUtil" %>
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
NameValuePersonalizationObject data = (NameValuePersonalizationObject)
PortletRendererUtil.getEditData(portletRequest);
String title = data.getPortletShortTitle();
// if short title is empty then use the title
if (title == null || title.length() == 0)
title = data.getPortletTitle();
%>
<SimpleHref target="<%= XMLUtil.escapeXMLAttribute(
portletRequest.getRenderContext().getPageURL()) %>">
<%= XMLUtil.escapeXMLText(title) %>
</SimpleHref>

Note:

The text being output as the URL and the short title label are passed through special XML escape utilities. Because text/vnd.oracle.mobilexml is an XML content type, generated responses must adhere to XML rules, which require the escaping of specific characters. Unless generating static text, we recommend that all text be escaped using the two supplied utilities. The reason for two utility methods is that the set of characters requiring escape varies depending upon whether the text is a tag attribute value or a tag value.

7. Declare support for Link mode. Once you have implemented Link mode, you must update provider.xml to indicate the presence of Link mode. You declare Link mode by adding code similar to the following to provider.xml:

<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>2</id>
<name>Lottery</name>
...
<showLink>true</showLink>
<showEdit>true</showEdit>
<showEditToPublic>false</showEditToPublic>
...
</portlet>

8. Bind the JSPs to the Link mode. The portlet must declare the mapping between the Show modes and the JSP renderers. The syntax for Link mode is similar to that for Show mode.

<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>2</id>
<name>Lottery</name>
...
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/html</contentType>
<renderContainer>true</renderContainer>
<linkPage
class="oracle.portal.provider.v2.render.http.ResourceRenderer" >
<resourcePath>/htdocs/lottery/anchorlotto.jsp</resourcePath>
<contentType>text/html</contentType>
</linkPage>
<linkPage
class="oracle.portal.provider.v2.render.http.ResourceRenderer" >
<resourcePath>/htdocs/lottery/milotto.jsp</resourcePath>
<contentType>text/vnd.oracle.mobilexml</contentType>
</linkPage>
...
</renderer>
...
</portlet>

7.2.10.1 Accessing Configuration, User, and Device Information

To better support mobile devices, Oracle Portal passes extra information to the portlet for use in generating its response. This information falls into three major categories, as follows:

- Section 7.2.10.1.1, "Configuration Data"

- Section 7.2.10.1.2, "User Data"

- Section 7.2.10.1.3, "Device Information"

7.2.10.1.1 Configuration Data

Oracle Portal sends a flag that indicates whether the mobile function is enabled when requesting that the portlet render its personalization or edit pages. Portlets can use this information to exclude or include mobile specific attributes in their personalization pages as appropriate.

The portlet accesses this information using the PortletRenderRequest object:

...
if (portletRequest.getPortalConfig().isMobileEnabled()) {
...
}
...

7.2.10.1.2 User Data

OracleAS Wireless adds the user location to the requests it forwards to Oracle Portal for response. This user location information is determined by the user's actual location, if the user's device has this support, or a profiled location. The user location is exposed by the ProviderUser object, which you can access from the PortletRenderRequest object. Portlets that are location aware can use this information to adjust the content they generate.

...
UserLocation location = portletRequest.getUser().getLocation();
if (location != null) {
...
}
...

7.2.10.1.3 Device Information

On each request, Oracle Portal sends characteristics about the requesting device to the portlet. This information is sent for all portlet requests, not just mobile requests. The information classifies the type of device making the request, its layout orientation, the maximum response size the device can handle, and an indication of whether the connection with the device is secure. Table 7-3 describes the available device types.

Table 7-3 Device Classes

Class

Description

voice

Indicates a voice-only device, such as a normal telephone calling a voice access number.

micromessenger

Indicates text messenging devices, such as SMS phones or pagers.

messenger

Indicates general messenging devices, such as e-mail.

microbrowser

Indicates a small size display device, which supports a markup browser, such as a WAP phone.

pdabrowser

Indicates a medium size display device, such as a Palm or PocketPC.

pcbrowser

Indicates a large size display device used with desktop browsers.

Portlets may choose to alter the layout or representation of the content in their response based on the type of device making the request. For example, a portlet may break a wide table into a series of screens that link column groups together for small screen devices.

The maximum response size is a hint that a portlet can use to constrain the amount of data it returns. The size is expressed in bytes. A maximum response size of 0 means the size is unknown.

The portlet accesses this information using the PortletRenderRequest object.

...
DeviceInfo deviceInfo = portletRequest.getDeviceInfo();
switch (deviceInfo.getDeviceClass()) {
case DeviceInfo.DeviceClass.MICROBROWSER:
renderMicroBrowser(portletRequest);
break;
default:
renderDefault(portletRequest);
break;
}
...

7.2.10.2 Modifying Navigation for Mobile Portlets

Much of the information in Section 7.2.3.3.4, "Implementing Navigation within a Portlet" is also relevant to the development of mobile portlets, but some of the utilities referenced are specific to portlets that render HTML. For portlets that render SimpleResult, the equivalent utilities shown in Table 7-4 are available.

Table 7-4 Equivalent HTML and SimpleResult Utilities

HTML Utilities

SimpleResult Utilities

UrlUtils.constructHTMLLink

UrlUtils.constructMXMLLink

UrlUtils.htmlFormHiddenFields

UrlUtils.mxmlFormHiddenFields

UrlUtils.emitHiddenField

UrlUtils.emitMxmlHiddenField

The following example illustrates how to adapt the thesaurus sample for a mobile-enabled portlet. Note that, when deployed as a mobile portlet, both sets of JSPs (HTML and SimpleResult) are deployed. These JSPs complement their HTML counterparts, they do not replace them. Notice also that the JSPs use SimpleResult as their markup and the value of the navigation parameter has changed such that it points to the next mobile JSP rather than the next desktop JSP.

mThesaurusForm.jsp:

<%
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String paramNameQ = "q";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameQ);
%>
<!-- Output the MXML content -->
<SimpleText>
<SimpleTitle>Thesaurus</SimpleTitle>
<SimpleTextItem>Enter the word you wish to search for:</SimpleTextItem>
<SimpleForm
method="POST"
target="<%= UrlUtils.htmlFormActionLink(pRequest,UrlUtils.PAGE_LINK) %>">
<%=UrlUtils.mxmlFormHiddenFields
(pRequest.getRenderContext().getPageURL()) %>
<%= UrlUtils.emitMxmlHiddenField(
HttpPortletRendererUtil.portletParameter(request, "next_page"),
"htdocs/path/mThesaurusLink.jsp" ) %>
<SimpleFormItem type="text" size="20" name="<%= qualParamNameQ %>"
value="" />
</SimpleForm>
</SimpleText>

mThesaurusLink.jsp:

<%
PortletRenderRequest pRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String paramNameQ = "q";
String paramNameNextPage = "next_page";
String qualParamNameQ =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameQ);
String qualParamNameNextPage =
HttpPortletRendererUtil.portletParameter(pRequest, paramNameNextPage);
String paramValueQ = pRequest.getQualifiedParameter(paramNameQ);
%>
<!-- Output the MXML content -->
<SimpleText>
<SimpleTitle>Words similar to <%= paramValueQ %></SimpleTitle>
<%
Thesaurus t = new Thesaurus();
String[] relatedWords = t.getRelatedWords(paramValueQ);
NameValue[] linkParams = new NameValue[2];
linkParams[0] = new NameValue(
qualParamNameNextPage, "htdocs/path/mThesaurusLink.jsp");
for (int i=0; i<relatedWords.length; i++)
{
linkParams[1] = new NameValue(
qualParamNameQ, relatedWords[i]);
%>
<SimpleTextItem>
<%= relatedWords[i] %>
<SimpleBreak/>
<%= UrlUtils.constructMXMLLink(
pRequest,
pRequest.getRenderContext().getPageURL(),
"(words related to " + relatedWords[i] + ")",
"",
linkParams,
true,
true)%>
</SimpleTextItem>
<%
}
%>
<SimpleTextItem>
<SimpleHref target="<%=XMLUtil.escapeXMLAttribute(
pRequest.getRenderContext().getPageURL())%>">
Reset Portlet
</SimpleHref>
</SimpleTextItem>
</SimpleText>

7.2.11 Writing Multilingual Portlets

This section shows you how to build a Java portlet that can be rendered in different languages. The language used in your portlet will depend upon on the language setting that has been chosen in the portal that is displaying it.

Once you have completed this section you will be able to write portlets that support as many or as few languages as you wish. You will also be able to convert your existing portlets to support multiple languages. Once a portlet is written to support multiple languages, it is easy to plug in new languages. The basic model for multilingual Java portlets is similar to the standard Java Internationalization model. If you already know about Java Internationalization, you should find this process very familiar.

7.2.11.1 Assumptions

To perform the tasks in this section, we are making the following assumptions:

1. You have followed through and understood Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper".

2. You built a portlet using the wizard and successfully added it to a page.

7.2.11.2 Internationalizing Your Portlet

This consists of the following two tasks:

- Section 7.2.11.2.1, "Providing Translations for Portlet Content"

- Section 7.2.11.2.2, "Providing Translation for Portlet Attributes"

7.2.11.2.1 Providing Translations for Portlet Content

In Section 6.5, "Building Oracle PDK-Java Portlets with Oracle JDeveloper", you created a portlet using the Java Portlet Wizard. The basic message created by the wizard is only available in one language and the text displayed is hard-coded in to the portlet's renderer class. To make your portlets available in multiple languages, you have to store such language dependent elements in their own resource bundles.

Creating Resource Bundles

For each language you want your portlet to be available in, you will need a resource bundle. You will also need to create a resource bundle to use when there is no resource bundle corresponding to the language setting chosen in the portal. Perform the following tasks:

- Create a Default Resource Bundle
Perform the following steps:

1. In Oracle JDeveloper, create a Java class called MyProviderBundle that extends ListResourceBundle from the java.util.package. The class should contain a multi-dimensional array of objects that holds key-value pairs representing each of the language dependent elements from your JSP show page. This implementation is demonstrated in the following code:

package mypackage2;
import java.util.ListResourceBundle;
public class MyProviderBundle extends ListResourceBundle
{
public static String HELLO_MSG = "MyPortletHelloMessage";
public static String INFO_MSG = "MyPortletInfoMessage";
public Object[][] getContents()
{
return contents;
}
static private final Object[][] contents =
{
{HELLO_MSG, "Hello"},
{INFO_MSG, "This is the show page of the portlet and it is being generated in the default language!"}
};
}

2. Save MyProviderBundle.

- Creating Resource Bundles for Other Supported Languages
Now you must create a resource bundle class for each language you want your portlet to support. Each of these classes must be named the same as your default resource bundle class, but with a language code appended to the end. For example, if you want to support the French language, create a Java class named MyProviderBundle_fr. The language code fr is the same as the code that will be used by the locale object in the portal if the language setting is set to French

For more information on Locales, search for java.util.Locale in the Javadoc. Refer to the Javadoc on OTN by clicking Java Doc API on the Portlet Development page available at

http://www.oracle.com/technology/products/ias/portal/portlet_development_10g1014.html

When you change the language setting in Oracle Portal, you change the value of the current locale object and therefore the locale object's language code. These language codes adhere to the ISO:639 codes for representation for names of languages. To create resource bundles for other supported languages, perform the following steps:

1. To create a French resource bundle, create a Java class named MyProviderBundle_fr, as described earlier.

2. Using your default resource bundle as a template, replace the English language strings with their French equivalents. An example is as follows:

package mypackage2;

import java.util.ListResourceBundle;
public class MyProviderBundle_fr extends
ListResourceBundle
{
public Object[][] getContents()
{
return contents;
}
static private final Object[][] contents =
{
{MyProviderBundle.HELLO_MSG, "Bonjour"},
{MyProviderBundle.INFO_MSG, "Cette page est le 'show mode' de la portlet
et est generee dans la langue par defaut."}
};
}

3. Save MyProviderBundle_fr.

4. Repeat steps 1 through 3 for every language that you wish to create a resource bundle for, updating the class name with the appropriate language code and the message strings with their equivalent in the appropriate language.

Updating Your Renderer

To make use of the resource bundles you just created, you need to edit the JSP show page and replace the hard-coded messages with references that will pickup the messages at run time from the resource bundle that corresponds most closely with the locale object of the portal. To update your renderer, perform the following steps:

1. Open the JSP that represents your show page and change the following:

<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="java.util.ResourceBundle"
%>

<%
PortletRenderRequest pReq = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);

<!-- Get a resource bundle object for the current language. -->
ResourceBundle b = ResourceBundle.getBundle("mypackage2.MyProviderBundle",pReq.getLocale());
%>

<!--  Pull the message from the appropriate resource bundle. -->
<P> <%= b.getString(mypackage2.MyProviderBundle.HELLO_MSG) %>
<%= pReq.getUser().getName() %>.</P>
<P> <%= b.getString(mypackage2.MyProviderBundle.INFO_MSG) %></P>

2. Save your JSP page.

Now you can refresh your portlet and view the changes (Figure 7-12).

Figure 7-12 Portlet in English

To view the French greeting, you set the language in the Set Language portlet to French instead of English (Figure 7-13).

Figure 7-13 Portlet in French

Notice that the text inside the portlet has changed, but the portlet title remains in the default language, English. You can also have the portlet set the appropriate portlet attributes (such as portlet name, portlet title, and portlet description) by pointing to a resource bundle from provider.xml, as described in the next section.

7.2.11.2.2 Providing Translation for Portlet Attributes

In your provider's definition file, provider.xml, a number of attributes describing your portlet are defined such as the portlet's name and description, these are used in places, for example in your portlet's title bar in Show mode and so should be translated, too. There are two different ways of providing these translations, which one you choose is up to you. Both of these methods are outlined in the following sections:

- "Method 1: Using Resource Bundles at the Provider Level"

- "Method 2: Creating Resource Bundles at Portlet Level"

Method 1: Using Resource Bundles at the Provider Level

You can provide translations for your portlet attributes in your resource bundle(s), then specify that you want to use these resource bundles in provider.xml, specifying the keys you have used in your resource bundles. Using this method you can use the keys you want to, and as long as you use different keys for each corresponding attribute in your provider's various portlets you can have just one set of resource bundles that all of your provider's portlets can use. This section consists of the following tasks:

- Updating Your Resource Bundles
Perform the following steps:

1. Open your default resource bundle, MyProviderBundle.java.

2. Add additional strings to your resource bundle that represent your portlet attributes and then add text for those strings:

package mypackage2;

import java.util.ListResourceBundle;
public class MyProviderBundle extends ListResourceBundle
{
public static String HELLO_MSG = "MyPortletHelloMessage";
public static String INFO_MSG = "MyPortletInfoMessage";
public static String PORTLET_NAME = "FirstPortletName";
public static String PORTLET_TITLE = "FirstPortletTitle";
public static String PORTLET_SHORT_TITLE = "FirstPortletShortTitle";
public static String PORTLET_DESCRIPTION = "FirstPortletDescription";
public static String TIMEOUT_MESSAGE = "FirstPortletTimeoutMessage";

public Object[][] getContents()
{
return contents;
}
static private final Object[][] contents =
{
{HELLO_MSG, "Hi"},
{INFO_MSG, "This is the show page of the portlet and it is being generated
in the default language!"},
{PORTLET_NAME, "MyNLSPortlet"},
{PORTLET_TITLE, "My NLS Portlet"},
{PORTLET_SHORT_TITLE, "MyNLSPortlet"},
{PORTLET_DESCRIPTION, "My first ever NLS portlet, using my
MyPortletShowPage.jsp"},
{TIMEOUT_MESSAGE, "Timed out waiting for MyNLSPortlet"}
};
}

3. Save MyProviderBundle.java.

4. Open MyProviderBundle_fr.java. Change it so that it contains the French strings that match the strings declared in MyProviderBundle.

package mypackage2;

import java.util.ListResourceBundle;
public class MyProviderBundle_fr extends ListResourceBundle
{
public Object[][] getContents()
{
return contents;
}
static private final Object[][] contents =
{
{MyProviderBundle.HELLO_MSG, "Bonjour"},
{MyProviderBundle.INFO_MSG, "Cette page est le 'show mode' de la portlet
et est generee en francais!"},
{MyProviderBundle.PORTLET_NAME, "MaPremierePortlet"},
{MyProviderBundle.PORTLET_TITLE, "Ma Portlet Multi-Langue"},
{MyProviderBundle.PORTLET_SHORT_TITLE, "Ma NLS Portlet"},
{MyProviderBundle.PORTLET_DESCRIPTION, "Ma premiere portlet
multi-langue, utilisant mon renderer"},
{MyProviderBundle.TIMEOUT_MESSAGE, "Temps d'acces a la portlet
demandee expire"}
};
}

5. Save MyProviderBundle_fr.java.

- Updating provider.xml
Perform the following steps:

1. Open the XML provider definition file and update it to point to the resource bundle instead of using the hard-coded portlet attribute values.

<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>3</id>
<resource>mypackage2.MyProviderBundle</resource>
<nameKey>FirstPortletName</nameKey>
<titleKey>FirstPortletTitle</titleKey>
<ShortTitleKey>FirstPortletShortTitle</ShortTitleKey>
<descriptionKey>FirstPortletDescription</descriptionKey>
<timeout>10</timeout>
<timeoutMessageKey>FirstPortletTimeoutMessage</timeoutMessageKey>
<showEditToPublic>false</showEditToPublic>
<hasAbout>true</hasAbout>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

Method 2: Creating Resource Bundles at Portlet Level

PDK-Java defines a set of resource bundle keys that you can use for providing translations for your portlet attributes. Making use of these keys means that you don't have to specify the resource bundle keys in your provider.xml file, as we did in "Method 1: Using Resource Bundles at the Provider Level". However, you do have to provide a separate set of resource bundles for each portlet in your provider as the keys you use for each portlet need to be the same, but their values will differ. You must perform the following tasks:

- Updating Your Resource Bundles
Perform the following steps:

1. Open your default resource bundle, MyProviderBundle.java.

2. Remove any changes you made from the previous section, and import oracle.portal.provider.v2.PortletConstants. You can then reference the following constants instead of the strings. You do not have to declare static strings when using PortletConstants:

{PortletConstants.NAME, "MyNLSPortlet"},
{PortletConstants.TITLE, "My NLS portlet"},
{PortletConstants.SHORTTITLE, "MyNLSPortlet"},
{PortletConstants.DESCRIPTION, "My first ever NLS portlet"},
{PortletConstants.TIMEOUTMSG, "Timed out waiting for MyNLSPortlet"}

3. Save MyProviderBundle.java.

4. Open MyProviderBundle_fr.java. Remove the portlet attributes added in the previous section, import oracle.portal.provider.v2.PortletConstants, and reference the constants instead of the strings.

{PortletConstants.NAME, "MaPremierePortlet"},
{PortletConstants.TITLE, "Ma Portlet Multi-Langue"},
{PortletConstants.SHORTTITLE, "Ma NLS Portlet"},
{PortletConstants.DESCRIPTION, "Ma premiere portlet multi-langue,
utilisant mon renderer"},
{PortletConstants.TIMEOUTMSG, "Temps d'acces a la portlet demandee
expire"}

5. Save MyProviderBundle_fr.java.

- Updating provider.xml
Perform the following steps:

1. In provider.xml, you need to use only one tag instead of one tag for each string as you did in "Method 1: Using Resource Bundles at the Provider Level". Delete all translated strings in the file, for example, the <nameKey>, <titleKey>, <ShortTitleKey>, and <descriptionKey> tags. Then add the following tag between the portlet id and the timeout number value:

<resource>mypackage2.MyProviderBundle</resource>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

For more information on Java Internationalization see the Internationalization trail of the Java Tutorial.

7.2.11.3 Viewing the Portlet

Once you have updated your provider and deployed it to Oracle Containers for Java EE, refresh the provider and portal page containing your portlet. To see your resource bundles working, add the "Set Language" portlet to your page and try changing the language setting to French. Remember that the default resource bundle is English, and that selecting any other language that doesn't have a corresponding resource bundle will result in the portlet being displayed in English.

7.3 Building Struts Portlets with Oracle JDeveloper

This section describes the framework for building Struts portlets with Oracle JDeveloper for use in Oracle Portal. You will learn how to build a Struts portlet from an existing application by adding the Struts Tag Library from the Oracle Portal Developer Kit (version 9.0.4.0.2 or higher) to Oracle JDeveloper, then use the Oracle PDK Java Portlet wizard to create the Java portlet itself. This sections covers the following tasks:

- Section 7.3.1, "Oracle Portal and the Apache Struts Framework"

- Section 7.3.2, "Creating a Struts Portlet"

7.3.1 Oracle Portal and the Apache Struts Framework

This section discusses the use of the Apache Struts with Oracle Portal. Struts is an implementation of the Model-View-Controller (MVC) design pattern. The following topics are discussed in this section:

- Section 7.3.1.1, "Model View Controller Overview"

- Section 7.3.1.2, "Apache Struts Overview"

- Section 7.3.1.3, "Oracle Portal Integration with Struts"

- Section 7.3.1.4, "Summary"

7.3.1.1 Model View Controller Overview

Enterprise applications undertake several distinct tasks, as follows:

- Data access

- Business logic implementation

- User interface display

- User interaction

- Application (page) Flow

The MVC (Model View Controller) architecture provides a way of compartmentalizing these tasks, based on the premise that activities, such as data presentation, should be separate from data access. This architecture enables you to easily plug a data source into the application without having to rewrite the user interface. MVC allows the logical separation of an application into three distinct layers: the Model, the View, and the Controller.

The Model

The Model is the repository for the application data and business logic. One facet of the Model's purpose is to retrieve data from and persist data to the database. It is also responsible for exposing the data in such a way that the View can access it, and for implementing a business logic layer to validate and consume the data entered through the View. At the application level, the Model acts as the validation and abstraction layer between the user interface and the business data that is displayed. The database server itself is simply a persistence layer for the Model.

The View

The View is responsible for rendering the Model data using JSPs. The View code does not include a hardcoded application or navigation logic, but may contain some logic to carry out tasks like displaying conditional data based on a user role. When an end user executes an action within the HTML page that the View renders, an event is submitted to the Controller. The Controller then determines the next step.

The Controller

The Controller is the linchpin of the MVC pattern. Every user action carried out in the View is submitted through the Controller. The Controller then performs the next action, based on the content of the request from the browser.

The Controller can be driven in several different ways. For example, you can use URL arguments to route the requests to the correct code. The MVC pattern itself determines the function of the Controller, not how it should work.

Benefits

The MVC architecture provides a clear and modular view of the application and its design. By separating the different components and roles of the application logic, it allows developers to design applications as a series of simple and different components: the Model, the View, and the Controller. This pattern should help to create applications that are easier to maintain and evolve. For example, once you create one view, you can easily create another view using the same business logic. Because of the ease and reusability, the MVC pattern is the most widely used pattern in the context of Web-based application development.

Figure 7-14 shows how the MVC pattern applies to a conventional thin-client Web application:

Figure 7-14 The MVC Pattern

7.3.1.2 Apache Struts Overview

The Apache Struts framework (http://struts.apache.org) is one of the most popular frameworks for building Web applications, and provides an architecture based on the JSP Model 2 approach of the MVC design paradigm. In the Model 2 approach, end user requests are managed by a servlet that controls the flow, and uses components such as JavaBeans or EJBs to access and manipulate the data. It then uses JSPs to render the application content in a Web browser. This model differs from JSP Model 1, where the JSPs managed the browser request and data access.

The Struts framework provides its own HTTP Servlet as a controller component. The Struts framework is driven by an XML configuration file that contains the page flow of the application. Struts does not provide the Model, but allows developers to integrate it to any data access mechanism, for example EJBs, TopLink, or JDBC. The most common technology for writing View components is JSP and Struts provides various tag libraries to help in writing these, although some of these tags have now been superseded by the Java Standard Tag Library (JSTL), which may also be used.

Note:

For more information about JSTL and JSF, see the FAQ on the Apache Software Foundation Web site (http://struts.apache.org/kickstart.html).

7.3.1.3 Oracle Portal Integration with Struts

The Oracle Portal Developer Kit contains numerous examples and documents regarding the usage of the Oracle Portal APIs, such as personalization and caching. The integration of the application flow and business logic is not part of the portlet APIs. By using the Struts framework, however, you can leverage the MVC architecture to create and publish applications within your enterprise portal.

Oracle Struts Portlet

To create a portlet using the Struts framework, or to generate a portlet from an existing Struts application, you must deploy all the components in the J2EE container. In the context of Oracle Portal, the Struts application is called by the PPE, and not by the browser as compared to a standalone Struts application. When a portlet show call is made, the page engine sends a request to the Struts portlet renderer, which then forwards the request to the Apache Struts Controller servlet, as shown in Figure 7-15.

Figure 7-15 Integrating Struts Applications with Oracle Portal

The following code shows a portion of the provider definition file (provider.xml):

...
<renderContainer>true</renderContainer>
<renderCustomize>true</renderCustomize>
<autoRedirect>true</autoRedirect>
<contentType>text/html</contentType>
<showPage class="oracle.portal.provider.v2.render.http.StrutsRenderer">
<defaultAction>showCustomer.do</defaultAction>
</showPage>
</renderer>
...

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

The showPage tag defines the business logic that will be executed in the Show mode of the portlet. The showPage of the Struts portlet contains two important components, which are as follows:

1. The renderer class (oracle.portal.provider.v2.render.http.StrutsRenderer), which receives the portlet request from the PPE and acts as a proxy to forward the request to the Struts Action Servlet.

2. The defaultAction tag, which defines the Struts action that will be used by default when the portlet is called for the first time.

The PDK-Java enables you to easily develop a view (Portal View) of your Struts application. This view enforces a consistent look and feel of your Struts portlet using portal styles, and allows the end user to use the application within the portal.

To create a Struts portlet, you must use the Oracle Portal JSP tags, which are extensions of the default Struts JSP tags. This development process is similar to that of creating a standalone Struts application. To learn how to build a Struts portlet, refer to Section 7.3.2.1, "Creating a Struts Portlet". Also, since the portlet and struts application must also be in the same Servlet Context, you must create a single Web application that contains both elements. To learn how to easily create this Web application in Oracle JDeveloper, refer to the next section, Section 7.3.2.1, "Creating a Struts Portlet".

7.3.1.4 Summary

Apache Struts has become the de facto standard for developing MVC-based J2EE applications, because it offers a clean and simple implementation of the MVC design paradigm. This framework enables you, as the portlet developer, to separate the different components of an application, and to leverage the Struts controller to easily publish an existing Struts application to Oracle Portal without completely changing the existing business logic.

Note:

For more information on the Oracle Portal Developer Kit, see Portal Center (http://www.oracle.com/technology/products/ias/portal/pdk.html)

7.3.2 Creating a Struts Portlet

Oracle PDK contains new extensions to integrate Apache Struts applications. This section explains how to build a portlet from an existing struts application. You can also follow these steps to create a portlet that uses the Model View Controller paradigm. To learn more about the Apache Struts framework, refer to Section 7.3.1, "Oracle Portal and the Apache Struts Framework". The PDK-Java extensions described in this section rely on Apache Struts 1.1.

This section contains the following steps:

- Section 7.3.2.1, "Creating a Struts Portlet"

- Section 7.3.2.2, "Registering the Provider"

- Section 7.3.2.3, "Summary"

7.3.2.1 Creating a Struts Portlet

To publish a part of an existing Struts application as portlet, we recommend that you first create a new view to serve as the Portal View of your application. This view uses existing objects (Actions, ActionForm, and so on) with a new mapping and new JSPs.

Note:

Although we recommend that you create a Portal View of your application, you could alternatively replace your application's struts tags with PDK-Java struts tags. This approach enables your application to run both as a standalone struts application and a portlet.

In this example, you will create a portlet that enables you to add a new entry to a Web Logger (Blog). Figure 7-16 and Figure 7-17 show how you submit a blog and save a blog entry.

Figure 7-16 Submitting a Blog

Figure 7-17 Saving a Blog Entry

prepareNewBlog is a simple empty action that redirects the request to the enterNewBlog.jsp page. This page shows a form for submitting a new blog.

The corresponding entry in the struts-config.xml is:

<action path="/prepareNewBlog" scope="request"
type="view.PrepareNewBlogAction" >
<forward name="success" path="/view/enterNewBlog.jsp"/>
</action>
<action path="/saveNewBlog" name="blogForm" scope="request"
type="view.SaveNewBlogAction" input"/view/enterNewBlog.jsp"  >
<forward name="success" path="/view/newBlogConfirmation.jsp"/>
</action>

7.3.2.1.1 Create a new flow and view to host the portlet actions

To create a new view, first create a new set of ActionMappings (page flow) that will redirect the various actions and requests to Portal-specific JSPs.

<action path="/portal/prepareNewBlog" scope="request"
type="view.PrepareNewBlogAction" >
<forward name="success" path="/view/portal/enterNewBlog.jsp"/>
</action>
<action path="/portal/saveNewBlog" name="blogForm" scope="request" type="view.SaveNewBlogAction" input="/view/enterNewBlog.jsp"  >
<forward name="success" path="/view/portal/newBlogConfirmation.jsp"/>
</action>

As you can see, only the path attributes are modified. The FormBean Action responsible for the application business logic remains unchanged.

7.3.2.1.2 Creating the new JSPs

As specified in the previous step, the actions forward the request to new JSPs, which are responsible for rendering the portlet content. Your new portlet view JSPs can share the HTML with the standalone view, but be sure that the portlet meets the following criteria:

- Uses Portal styles that enforce a consistent look and feel with the rest of the portal page.

- Contains HTML code that is allowed in HTML table cells (that is, no <html>, <body>, and <frame> tags).

- Renders portal-aware links and forms. This is necessary to ensure that your Struts portlet renders its content inline, thus keeping your users within the context of the portal page by rendering the requested content within the same portlet container.

To achieve inline rendering in your Struts portlet, you must use Oracle PDK tags:

<pdk-struts-html:form action="/portal/saveNewBlog.do">
...
...
</pdk-struts-html:form>

During the rendering of the portlet, one of the JSP tags (for example, the pdk-struts-html:form tag), submits the form to the Parallel Page Engine (PPE), which then sends the parameters to the Struts portlet. The Struts controller executes the logic behind these actions and returns the next JSP to the portlet within the portal page.

The PDK contains all the Struts tags, and extends all the tags that are related to URLs. The following is a list of the PDK extended tags:

- form: creates an HTML form and embeds the portal page context in the form to ensure inline rendering

- text: renders fields on the form.

- link and rewrite: create a link to the portal page, and are required for inline rendering

- img: creates an absolute link that points to the Web provider. If you want to use this tag in the context of Internet Web sites that have firewalls, you must make sure the provider is directly accessible from the Internet. If it is not possible, you can deploy the images to the Oracle Portal middle tier and use the Apache Struts image link to generate a relative link (relative to the portal, not to the application).

Note:

You can register the Oracle PDK with Oracle JDeveloper so that you can drop the tags from the Oracle JDeveloper Components Palette. For more information, see the Registering a Custom Tag Library in JDeveloper section in the Oracle JDeveloper online help.

7.3.2.1.3 Creating a Portlet

You can create your Struts portlet either manually or by using the Java Portlet wizard. Although the wizard does not explicitly offer Struts support, you can utilize the wizard to build your Struts portlet.

To create a portlet, perform the following steps:

1. In Oracle JDeveloper, open the Java Portlet Wizard to create an Oracle PDK Java Portlet.

Note:

The Java Portlet and Oracle PDK Java Portlet options are used to create JPS-compliant portlets and PDK-Java portlets respectively. Clicking Java Portlet or Oracle PDK Java Portlet opens the Java Portlet Wizard. For more information on opening the wizard, see Section 6.5.1, "Creating an Oracle PDK-Java Portlet and Provider".

2. For the Implementation Style of the show page, select Java Class.

3. For the Package Name, enter oracle.portal.provider.v2.render.http

4. For the Class Name, enter StrutsRenderer. This generates the skeleton of the portlet renderer class, StrutsRenderer.

5. Since the StrutsRenderer is part of the PDK, you do not need this generated file. So, when you finish the wizard, you must delete the file generated by the wizard. To do so, click the file in the System Navigator window, then choose File > Erase from Disk in Oracle JDeveloper.

6. Edit the provider.xml and change the following properties:
At the provider level, perform the following:

- If you want users to always return to the same portlet state as when they left the portal page, you can configure the struts renderer to save the struts action in the struts context:

<actionInSession>true</actionInSession>

If you prefer that users always start from the beginning of the portlet when they return from outside the portal page, then you should not save the struts action:

<actionInSession>false</actionInSession>

- If the Struts application uses sessions (for example, the form sysnchronizer token mechanism is used or <actionInSession> is set to true), enable session handling:

<session>true</session>

At the portlet level, perform the following:

- Specify the first action to raise when the portlet is called. Use the following code:

<showPage class="oracle.portal.provider.v2.render.http.StrutsRenderer">
<defaultAction>/portal/prepareNewBlog.do</defaultAction>
</showPage>

For more information on the syntax of provider.xml, refer to the provider Javadoc on OTN:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

7.3.2.1.4 Extending the portlet to add Portal Business Logic

In your application, you should add code specific to your portal, such as the user's information, personalization, and localization. To do so, you can create a new Action class that is only called in the Portal context, and handles all Portal-specific business logic.

7.3.2.2 Registering the Provider

Now that your portlet is ready to be used by Oracle Portal, you must make it accessible to Oracle Portal by registering it. For information on how to register your PDK-Java portlet, refer to Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet". If you chose to save the struts action in the session context, <actionInSession>true</actionInSession>, then you must specify the provider login frequency as Once per user session during registration. Setting the login frequency this way ensures the session information is passed to your struts portlet.

7.3.2.3 Summary

Oracle Application Server enables you to easily create Struts portlets using Oracle JDeveloper and publish existing Struts applications to Oracle Portal. For more information on using the Oracle JDeveloper Java Portlet wizards, refer to the beginning of this chapter. For more information on using Oracle Portal, refer to the Oracle Fusion Middleware User's Guide for Oracle Portal and the Oracle Portal Online Help.

7.3.3 Creating an Oracle Application Development Framework (ADF) Portlet

Similarly to Struts, Oracle ADF relies on the MVC design pattern. Oracle ADF applications leveraging the Struts controller can be turned into portlets and deployed to Oracle Portal the same way as Struts applications. Refer to Section 7.3.2, "Creating a Struts Portlet".

Note:

After creating the Oracle ADF portlet, you may find that the JSP page does not display correctly. This is because the Parallel Page Engine request is sent to a provider through a SOAP request (oracle.webdb.provider.v2.adapter.SOAPServlet), which implies that the portal does not serve the page as a standard .JSP page. To resolve this, create the ADFBindingFilter filter.

To create the ADFBindingFilter filter and filter mappings, include the following in your web.xml file:

<filter>
<filter-name>ADFBindingFilter</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>windows-1252</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<url-pattern>*</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<servlet-name>action</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>ADFBindingFilter</filter-name>
<servlet-name>jsp</servlet-name>
</filter-mapping>

Footnote Legend
Footnote 1: User personalization data for Oracle Portal objects is never exported. This restriction applies to portlets as well as other objects, such as pages.

8 Creating PL/SQL Portlets

Note:

In general, Oracle recommends that you build your portlets using Java rather than PL/SQL. For more information on choosing a technology for building your portlets, refer to Chapter 2, "Portlet Technologies Matrix". For more information on building your portlets using Java, refer to Chapter 6, "Creating Java Portlets".

The Oracle Portal PL/SQL APIs are implemented as a set of PL/SQL packages and objects. Database providers and portlets are deployed to a database schema as PL/SQL packages. This chapter explains how to create PL/SQL portlets based on the Oracle Portal Developer Kit-PL/SQL (PDK-PL/SQL). To make effective use of this chapter, you should already know PL/SQL and have some familiarity with the PL/SQL Web Toolkit.

This chapter contains the following sections:

- Section 8.1, "Guidelines for Creating PL/SQL Portlets"

- Section 8.2, "Building PL/SQL Portlets with the PL/SQL Generator"

- Section 8.3, "Building PL/SQL Portlets Manually"

- Section 8.4, "Implementing Information Storage"

- Section 8.5, "Using Parameters"

- Section 8.6, "Accessing Context Information"

- Section 8.7, "Implementing Portlet Security"

- Section 8.8, "Improving Portlet Performance with Caching"

- Section 8.9, "Implementing Error Handling"

- Section 8.10, "Implementing Event Logging"

- Section 8.11, "Writing Multilingual Portlets"

- Section 8.12, "Enhancing Portlets for Mobile Devices"

- Section 8.13, "Registering Providers Programmatically"

The source code for many of the examples referenced in this chapter is available as part of PDK-PL/SQL. You can download PDK-PL/SQL from the Oracle Portal Developer Kit (PDK) page on Oracle Technology Network (OTN):

http://www.oracle.com/technology/products/ias/portal/pdk.html

When you unzip PDK-PL/SQL, you will find the examples in:

../pdk/plsql/starter
../pdk/plsql/sample
../pdk/plsql/cache
../pdk/plsql/sso
../pdk/plsql/svcex

You can find the reference for PDK-PL/SQL in:

../pdk/plsql/doc

8.1 Guidelines for Creating PL/SQL Portlets

When you write your portlets in PL/SQL, you should follow the best practices described in this section:

- Section 8.1.1, "Portlet Show Modes"

- Section 8.1.2, "Recommended Portlet Procedures and Functions"

- Section 8.1.3, "Guidelines for Mobile Portlets"

8.1.1 Portlet Show Modes

Just like a Java portlet, a PL/SQL portlet has a variety of Show modes available to it. A Show mode is an area of functionality provided by a portlet. The following available Show modes are described more fully in Chapter 6, "Creating Java Portlets":

- Shared Screen mode is described in Section 6.1.1.1, "Shared Screen Mode (View Mode for JPS)"

- Edit mode is described in Section 6.1.1.2, "Edit Mode (JPS and Pdk-Java)".

- Edit Defaults mode is described in Section 6.1.1.3, "Edit Defaults Mode (JPS and PDK-Java)".

- Preview mode is describe in Section 6.1.1.4, "Preview Mode (JPS and PDK-Java)".

- Full Screen mode is described in Section 6.1.1.5, "Full Screen Mode (PDK-Java)".

- Help mode is described in Section 6.1.1.6, "Help Mode (JPS and Oracle Portal)".

- About mode is described in Section 6.1.1.7, "About Mode (JPS and PDK-Java)".

- Link mode is described in Section 6.1.1.8, "Link Mode (PDK-Java)".

To check for the selected Show mode, you can use the constants in the wwpro_api_provider package. These constants are listed with their corresponding Show mode in Table 8-1.

Table 8-1 Show Mode Constants in wwpro_api_provider

Show mode

Constant

Shared Screen

MODE_SHOW

Edit

MODE_SHOW_EDIT

Edit Defaults

MODE_SHOW_EDIT_DEFAULTS

Preview

MODE_SHOW_PREVIEW

Full Screen

MODE_SHOW_DETAILS

Help

MODE_SHOW_HELP

About

MODE_SHOW_ABOUT

Link

MODE_SHOW_LINK

8.1.2 Recommended Portlet Procedures and Functions

The primary goal of the portlet's code is to generate the HTML output that displays on a page for all of the Show modes required by Oracle Portal. Although it is possible to implement the portlet as a set of separate PL/SQL stored program units, organizing the portlet's code into a PL/SQL package is the best way of encapsulating related portlet code and data as a single unit in the database. You also achieve better database performance and ease of portlet maintenance.

As you may recall from Section 2.4, "Deployment Type", requests from Oracle Portal for a particular portlet go through the portlet's provider. To communicate with its portlets, the provider contains a set of required methods that make calls to the portlet code.

When implementing a portlet as a PL/SQL package, it is a good idea to organize the portlet code in parallel with the provider code. For example, when the provider needs to retrieve information about one of its portlets, it uses its get_portlet function. Hence, it makes sense for the portlet to contain a get_portlet_info function that returns the requested information when called by the provider's get_portlet function. Similarly, it is logical for the provider's show_portlet procedure to call the portlet's show procedure, which produces the HTML output for a requested Show mode and returns it to the provider.

Table 8-2 describes the recommended procedures and functions for a PL/SQL portlet to communicate effectively with the database provider.

Table 8-2 Recommended Functions and Procedures for PL/SQL Portlets

Procedure/Function Name

Purpose

get_portlet_info

Returns the portlet record to the provider.

show

Produces HTML output for a requested Show mode and returns it to the provider.

register

Initializes the portlet at the instance level. The register procedure should not contain any transaction closing statements, such as COMMIT, ROLLBACK, or SAVEPOINT. OracleAS Portal handles the closing of the transactions itself.

deregister

Enables cleanups at the instance level. The deregister procedure should not contain any transaction closing statements, such as COMMIT, ROLLBACK, or SAVEPOINT. OracleAS Portal handles the closing of the transactions itself.

is_runnable

Determines whether the portlet can be run. Security checks can be performed in this function.

copy

Copies the personalized and default values of portlet preferences from one portlet instance to a new portlet instance when Oracle Portal makes a copy of the page.

describe_parameters

Returns a list of public portlet parameters.

8.1.3 Guidelines for Mobile Portlets

Oracle Portal is capable of rendering its pages for both HTML and non-HTML (mobile) devices. When designing a portlet for a mobile device, you must consider some additional guidelines. The guidelines for mobile portlets are described fully in Section 6.1.4, "Guidelines for Mobile Portlets".

For information on how to build mobile-enabled portlets, refer to Section 8.12, "Enhancing Portlets for Mobile Devices".

8.2 Building PL/SQL Portlets with the PL/SQL Generator

To facilitate the development of database providers and PL/SQL portlets, you can use the PL/SQL Generator, a utility that creates installable PL/SQL code for a database provider and its portlets. The PL/SQL Generator is a standalone Web application that receives the provider and portlet definitions in the form of an XML file (similar in format to the provider.xml file). The XML tags used for the provider and portlet definition are a subset of the XML tags used for defining Web providers with PDK-Java. The output of the PL/SQL Generator is a SQL script that can be run from SQL*Plus. The script contains SQL commands for installing the provider and portlet packages in the correct order.

You can download the PL/SQL Generator along with its installation instructions from:

http://www.oracle.com/technology/products/ias/portal/files/plsqlgenerator.zip

The general model for working with the PL/SQL Generator is as follows:

1. Create an XML file that defines the provider and portlets that you want to build, as described in Section 8.2.1, "Creating the Input XML File".

2. Run the PL/SQL Generator using the XML file as input, as described in Section 8.2.2, "Running the PL/SQL Generator".

3. Publish the generated PL/SQL portlet, which includes the following steps:

- Install the provider generated by the PL/SQL Generator into the database, as described in Section 8.2.3.1, "Installing the Packages in the Database".

- Register the database provider with the Oracle Application Server, as described in Section 8.2.3.2, "Registering the Database Provider".

- Add the generated portlet to a page, as described in Section 8.2.3.3, "Adding Your Portlet to a Page".

8.2.1 Creating the Input XML File

The source XML file starts and ends with the <provider> and </provider> tags, and can include one or more portlet definitions. Each portlet definition is bracketed by the <portlet> and </portlet> tags. A portlet definition includes the XML tags that specify values for the portlet record attributes and enable the links in the portlet header. For example, the <name> tag specifies the portlet name in the provider domain and the <title> tag specifies the portlet display name or title. When set to true, the <showEdit> tag enables the Edit mode for the portlet and the corresponding link in the portlet header. Table 8-3 lists the available XML tags for PL/SQL Generator input.

Table 8-3 XML Tags for PL/SQL Generator Input

XML Tag

Definition

Value Type

provider

Encloses provider definition tags.

Not applicable

portlet

Encloses portlet definition tags.

Not applicable

id

Specifies the portlet ID in the provider. This value must be unique within the provider.

string

name

Specifies the portlet name. The name should not contain any spaces. The generator uses the information provided in the name tag for the portlet package name.

string

title

Specifies the portlet display name.

string

shortTitle

Specifies the portlet short display name. This tag is useful for mobile portlets.

string

description

Specifies the portlet description.

string

defaultLocale

Specifies the language the portlet renders by default. The value is the two letter ISO language and country codes expressed as language.country.

string

timeout

Specifies the portlet's timeout interval in seconds.

number

timeoutMsg

Specifies the message to display when the portlet times out.

string

showEdit

Indicates whether the portlet supports Edit mode, which enables the user to personalize the portlet's properties.

Boolean

showEditDefault

Indicates whether the portlet supports the Edit Defaults mode, which enables page administrators to personalize the default values of the portlet's properties.

Boolean

showDetails

Indicates whether the portlet can be viewed in Full Screen mode. In this mode, the entire browser window is dedicated to the portlet. Full screen mode enables the portlet to show more details than when it shares the page with other portlets.

Boolean

showPreview

Indicates whether the portlet supports the Preview mode.

Boolean

hasHelp

Indicates whether the portlet supports the Help mode.

Boolean

hasAbout

Indicates whether the portlet supports the About mode.

Boolean

language

Defines the portlet's default language (for example, en).

string

contentType

Indicates the default content type supported by the portlet. The tag can take one of the following values:

wwpro_api_provider.CONTENT_TYPE_HTML
wwpro_api_provider.CONTENT_TYPE_XML
wwpro_api_provider.CONTENT_TYPE_MOBILE

string

apiVersion

Specifies the version of the Oracle Portal PL/SQL API to which the portlet conforms. The value should be wwpro_api_provider.API_VERSION_1.

string

callIsRunnable

Indicates whether OracleAS Portal must check for the user's credentials before displaying the portlet. The default value is true.

Boolean

callGetPortlet

Indicates whether the portal can use the portlet record data stored in the Portlet Metadata Repository (PMR) instead of contacting the provider for the portlet record. If the portlet record (specified by provider id, portlet id, and language) returned by a provider does not change, then the provider should set the value for call_get_portlet to false. This tells the portal to use the PMR instead of making calls to the provider's get_portlet and get_portlet_list functions. An example of when a provider would not want the portal to use portlet metadata from the PMR is when the value of the portlet records is different for logged on users. The default value is true.

Boolean

acceptContentType

Specifies a comma-delimited list of content types that the portlet can produce. For example, if a portlet can produce content of both HTML and MOBILEXML type, then the tag value is:

text/html,text/vnd.oracle.mobilexml

string

hasShowLinkMode

Indicates whether the portlet implements the Link mode. If the value is false, the portlet uses its short or full title to display a link label that references the portlet content in a mobile device. Otherwise, a personalized link can be generated in the portlet code. The default value is false.

Boolean

mobileOnly

Indicates whether the portlet is available only to mobile devices. The default value is false.

Boolean

preferenceStorePath

Specifies the base preference store path where the provider has stored the portlet personalization information. This path is used when exporting portlets.

string

createdOn

Defines the portlet creation date. The default value is sysdate.

date

createdBy

Identifies the user who created the portlet record.

string

lastUpdatedOn

Defines the most recent date on which the portlet record was changed. The default value is sysdate.

date

lastUpdatedBy

Identifies the user who most recently changed the portlet record.

string

passAllUrlParams

Indicates parameter passing behavior in the portlet. If the tag value is true, then Oracle Portal passes all parameters in the URL to the portlet. If the tag value is false, then the portlet receives only those parameters that are intended for the portlet. The default value is true.

Boolean

cacheLevel

Indicates a portlet's cache level. It can take one of the following values:

wwpro_api_provider.CACHE_LEVEL_SYSTEM
wwpro_api_provider.CACHE_LEVEL_USER

string

rewriteUrls

Indicates whether or not URL rewriting will be performed on the output from a portlet render request. The default value is false.

Boolean

Following is a sample of the input XML for the PL/SQL Generator. Mandatory information is shown in bold.

<!-- This is a sample provider.xml file for the PLSQL Generator 1.2 -->
<provider>
<portlet>
<id>1</id>
<name>Test_Portlet</name>
<title>Test Portlet Title</title>
<shortTitle>Short portlet title</shortTitle>
<description>This is a Test portlet</description>
<timeout>30</timeout>
<timeoutMsg>Test Portlet Timed Out</timeoutMsg>
<showEdit>true</showEdit>
<showEditDefault>true</showEditDefault>
<showDetails>true</showDetails>
<showPreview>true</showPreview>
<hasHelp>true</hasHelp>
<hasAbout>true</hasAbout>
<language>en</language>
<contentType>wwpro_api_provider.CONTENT_TYPE_HTML</contentType>
<apiVersion>wwpro_api_provider.API_VERSION_1</apiVersion>
<callIsRunnable>true</callIsRunnable>
<callGetPortlet>true</callGetPortlet>
<acceptContentType>'text/html'</acceptContentType>
<hasShowLinkMode>false</hasShowLinkMode>
<mobileOnly>false</mobileOnly>
<passAllUrlParams>true</passAllUrlParams>
<cacheLevel>wwpro_api_provider.CACHE_LEVEL_USER</cacheLevel>
<rewriteUrls>true</rewriteUrls>
</portlet>
</provider>

8.2.2 Running the PL/SQL Generator

After you have created a valid XML input file, you can run the PL/SQL Generator to generate the provider and portlet packages in the form of a SQL file as follows:

1. If you have not already done so, install the PL/SQL Generator according to the instructions that came with the download.

2. From your browser, go to the URL for the PL/SQL Generator. It should look something like the page shown in Figure 8-1.

Figure 8-1 PL/SQL Generator Page

3. Click Browse and select the source XML file for the Source XML File field. Refer to Section 8.2.1, "Creating the Input XML File" for more information on creating the XML file.

4. In the Provider Name field, enter the name of the provider. The provider name must not contain any spaces. The generator uses the value entered in this field for the provider package name.

5. Click Generate to generate the SQL file that contains the installable PL/SQL code for the provider and portlet packages. When the browser prompts you to save or open the file, choose Save.

6. In the Save dialog box, change the file extension to .sql and revise the file name as you wish.

7. Save the file.

8.2.3 Publishing the Generated PL/SQL Portlet

After you have run the PL/SQL Generator and obtained a SQL file, you still need to perform the following tasks to make the provider and portlets available to Oracle Portal:

- Section 8.2.3.1, "Installing the Packages in the Database"

- Section 8.2.3.2, "Registering the Database Provider"

- Section 8.2.3.3, "Adding Your Portlet to a Page"

8.2.3.1 Installing the Packages in the Database

To install the generated provider and portlet packages into the database where you installed Oracle Portal, perform the following steps:

1. Start a SQL*Plus session and log in to the PORTAL schema.

2. Create a new database schema, the provider schema, to store the generated provider and portlet packages by entering the following commands in SQL*Plus:

create user provider_schema identified by provider_schema_password;
grant resource, connect to provider_schema;

3. Grant the EXECUTE privilege for the Oracle Portal APIs to the provider schema by running the provsyns.sql script that is located in the ORACLE_HOME/portal/admin/plsql/wwc directory as follows:

@provsyns.sql provider_schema

4. Log in to the provider schema and run the generated SQL file. It will create the provider and portlet packages in the database.

8.2.3.2 Registering the Database Provider

After creating the provider and portlet packages in the database, you must register the provider with Oracle Portal before adding the PL/SQL portlet to a portal page, by performing the following steps:

1. Log in to Oracle Portal as an administrator.

2. From the Portal Builder, click the Administer tab then the Portlets tab.

3. In the Remote Providers portlet, click Register a Provider.

4. Fill in the Name, Display Name, Timeout, and Timeout Message as desired.

5. From the Implementation Style, list choose Database.

6. Click Next and complete the remainder of the wizard.

7. When you complete the wizard, click Finish.

8. From the Portlet Repository portlet, click Display Portlet Repository.

9. Browse the repository and find the provider that you just registered. Typically, new providers appear in the Portlet Staging Area of the repository.

10. Once you find the provider, confirm that it contains all of the portlets you created in the provider. If the provider or its portlets do not appear, then retrace the steps in this section and the preceding sections (Section 8.2.3.1, "Installing the Packages in the Database", Section 8.2.1, "Creating the Input XML File", and Section 8.2.2, "Running the PL/SQL Generator") to ensure that you correctly created and registered your provider and portlet.

8.2.3.3 Adding Your Portlet to a Page

Once your provider and its portlets appear in the repository, you can add it to a page. To add your portlet to a page, follow the instructions in the Oracle Fusion Middleware User's Guide for Oracle Portal.

8.3 Building PL/SQL Portlets Manually

This section describes how to build a basic PL/SQL portlet using the hello world sample contained in the starter provider sample. The starter provider sample, located in ..\pdkplsql\pdk\plsql\starter in PDK-PL/SQL (pdkplsql.zip), consists of the following files:

- starter_provider.pks is the package specification of the starter provider.

- starter_provider.pkb is the package body of the starter provider.

- helloworld_portlet.pks is the package specification of the hello world portlet.

- helloworld_portlet.pkb is the package body of the hello world portlet.

- snoop_portlet.pks is the package specification of the snoop portlet.

- snoop_portlet.pkb is the package body of the snoop portlet.

- insintpr.sql is the installation script for the starter provider.

The general model for building PL/SQL portlets manually is as follows:

1. Modify the hello world portlet package specification and body to create your own portlet package, as described in Section 8.3.1, "Implementing the Portlet Package".

2. Modify the starter provider package specification and body to add your new portlet to a provider, as described in Section 8.3.2, "Implementing the Provider Package".

3. Add your portlet to a page, as described in Section 8.3.3, "Adding Your Portlet to a Page".

8.3.1 Implementing the Portlet Package

To modify helloworld_portlet.pks and helloworld_portlet.pkb to create your own portlet package, perform the following steps:

1. Make copies of the package specification, helloworld_portlet.pks, and body, helloworld_portlet.pkb.

2. Rename the copies to my_first_portlet.pks and my_first_portlet.pkb, respectively.

3. Open my_first_portlet.pks in an editor and change the name of the package to my_first_portlet:

CREATE OR REPLACE
package my_first_portlet
is
...

end my_first_portlet;

4. Open my_first_portlet.pkb in an editor and repeat the change that you made in the previous step; that is, change the name of the package to my_first_portlet.

5. In my_first_portlet.pkb, find the function named get_portlet_info and modify it as follows:

function get_portlet_info
(
p_provider_id in integer
,p_language in varchar2
)
return wwpro_api_provider.portlet_record
is
l_portlet      wwpro_api_provider.portlet_record;
begin
l_portlet.id := starter_provider.PORTLET_FIRST;
l_portlet.provider_id := p_provider_id;
l_portlet.title := 'My First Portlet';
l_portlet.name := 'My_First_Portlet';
...

6. In my_first_portlet.pkb, find the procedure named show and modify it as follows:

procedure show
(
p_portlet_record        wwpro_api_provider.portlet_runtime_record
)
is
l_portlet      wwpro_api_provider.portlet_record;
l_text_name in varchar2(100);
l_text in varchar2(200);
begin
...
/*
Display the content of the portlet in the show mode.
Use the wwui_api_portlet.portlet_text() API when
generating the content of the portlet so that the
output uses the portlet CSS.
*/
htp.p(wwui_api_portlet.portlet_text(
p_string   =>  'Hello World - Mode Show'
,p_level    =>  1
));
/*
Add the functionality you want here. In this case we are adding
a welcome message addressed to the current user.
*/
l_text_name := 'Welcome to my first portlet ' || wwctx_api.get_user;
l_text := wwui_api_portlet.portlet_text(
p_string   =>  l_text_name,
p_level    =>  1        );
htp.p(l_text);        htp.para;
if (p_portlet_record.has_border) then
wwui_api_portlet.close_portlet;
end if;
...

7. Save my_first_portlet.pkb.

8.3.2 Implementing the Provider Package

After you implement the portlet package, you must add your portlet to a provider. To modify starter_provider.pks and starter_provider.pkb to add your new portlet to a provider, perform the following steps:

1. Make copies of the package specification, starter_provider.pks, and body, starter_provider.pkb.

2. Rename the copies to starter_provider2.pks and starter_provider2.pkb, respectively.

Note:

If you want to create a new, empty provider, remove all references to the hello world and snoop portlets from starter_provider2.pks and starter_provider2.pkb before performing the steps that follow.

3. Open starter_provider2.pks in an editor.

4. Add a constant called PORTLET_FIRST. This constant is used as the identifier for the portlet within the provider. Hence, the constant's value must be unique within the provider.

CREATE OR REPLACE
package STARTER_PROVIDER
is
/**
* This package is used as an example to show how providers can be created
* in the portal system.
*
* This provider contains the following portlets:
*
* Hello World (PORTLET_HELLOWORLD)
* Snoop (PORTLET_SNOOP)
*
*/
PORTLET_HELLOWORLD constant integer := 1;
PORTLET_SNOOP      constant integer := 2;
PORTLET_FIRST      constant integer := 3;

5. Save starter_provider2.pks.

6. Open starter_provider2.pkb in an editor.

7. In starter_provider2.pkb, add a call for the new portlet's get_portlet_info function in the get_portlet function of the provider package. This step entails adding the call my_first_portlet.get_portlet_info in the get_portlet function. The get_portlet function allows the portal to retrieve information for the portlet when necessary.

function get_portlet
p_provider_id in integer
,p_portlet_id in integer
,p_language in varchar2
)
return wwpro_api_provider.portlet_record
is
begin
if (p_portlet_id = PORTLET_HELLOWORLD) then
return helloworld_portlet.get_portlet_info(
p_provider_id  => p_provider_id
,p_language     => p_language
);
elsif (p_portlet_id = PORTLET_SNOOP) then
return snoop_portlet.get_portlet_info(
p_provider_id  => p_provider_id
,p_language     => p_language
);
elsif (p_portlet_id = PORTLET_FIRST) then
return my_first_portlet.get_portlet_info(
p_provider_id  => p_provider_id
,p_language     => p_language
);
else
raise wwpro_api_provider.PORTLET_NOT_FOUND_EXCEPTION;
end if;
end get_portlet;

8. In starter_provider2.pkb, add the new portlet to the list of portlets returned by the provider. This step entails adding the new portlet to the get_portlet_list function of the provider. The get_portlet_list function tells the portal which portlets the provider implements.

function get_portlet_list
...
begin
l_cnt := 0;
if (p_security_level = false ) then            l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_HELLOWORLD
,p_language     => p_language
);
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_SNOOP
,p_language     => p_language
);
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_FIRST
,p_language     => p_language
);
else
if (helloworld_portlet.is_runnable(
p_provider_id     =>  p_provider_id
,p_reference_path  =>  null)
) then
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_HELLOWORLD
,p_language     => p_language
);        end if;
if (snoop_portlet.is_runnable
p_provider_id     =>  p_provider_id
,p_reference_path  =>  null)
) then
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_SNOOP
,p_language     => p_language
);
end if;
if (my_first_portlet.is_runnable(
p_provider_id     =>  p_provider_id
,p_reference_path  =>  null)
) then
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => PORTLET_FIRST
,p_language     => p_language
);
end if;
end if;
return l_portlet_list;
end get_portlet_list;

9. In starter_provider2.pkb, modify the is_portlet_runnable function to add a call to the is_runnable function of the new portlet.

function is_portlet_runnable
(
p_portlet_instance in wwpro_api_provider.portlet_instance_record
)
return boolean
is
begin
if (p_portlet_instance.portlet_id = PORTLET_HELLOWORLD) then
return helloworld_portlet.is_runnable(
p_provider_id     =>  p_portlet_instance.provider_id
,p_reference_path  =>  p_portlet_instance.reference_path
);
elsif (p_portlet_instance.portlet_id = PORTLET_SNOOP) then
return snoop_portlet.is_runnable(
p_provider_id     =>  p_portlet_instance.provider_id
,p_reference_path  =>  p_portlet_instance.reference_path
);
elsif (p_portlet_instance.portlet_id = PORTLET_FIRST) then
return my_first_portlet.is_runnable(
p_provider_id     =>  p_portlet_instance.provider_id
,p_reference_path  =>  p_portlet_instance.reference_path
);
else
raise wwpro_api_provider.PORTLET_NOT_FOUND_EXCEPTION;
end if;
end is_portlet_runnable;

10. Repeat step 9 according to the information in Table 8-4.

Table 8-4 Changes to starter_provider2.pkb

Procedure/Function

Addition

procedure register_portlet

elsif (p_portlet_instance.portlet_id =
PORTLET_FIRST) then
my_first_portlet.register(p_portlet_instance)

procedure deregister_portlet

elsif (p_portlet_instance.portlet_id =
PORTLET_FIRST) then
my_first_portlet.deregister
(p_portlet_instance)

function describe_portlet_parameters

elsif (p_portlet_id =
PORTLET_FIRST) then
return my_first_portlet.describe_parameters
(p_provider_id, p_language);

procedure show_portlet

elsif (p_portlet_record.portlet_id =
PORTLET_FIRST) then
my_first_portlet.show(p_portlet_record)

procedure copy_portlet

elsif (p_copy_portlet_info.portlet_id =
PORTLET_FIRST) then
my_first_portlet.copy(p_portlet_record)

11. Save and close starter_provider2.pkb.

12. Log in to Oracle Portal as you normally would.

13. From the Portal Builder, click the Administer tab then the Portlets tab.

14. From the Portlet Repository portlet, click Display Portlet Repository.

15. Browse the repository and find the starter provider (typically it will appear in the Portlet Staging Area of the repository). It should contain its two original portlets: hello world and snoop.

16. From a command line prompt, start SQL*Plus and connect as the owner of the starter provider schema.

17. Compile the new and modified PL/SQL packages in the following order:

- starter_provider2.pks

- my_first_portlet.pks

- starter_provider2.pkb

- my_first_portlet.pkb

18. If any compilation errors occur, fix and recompile them until all of the packages compile successfully.

19. From the Portlet Repository portlet, click Display Portlet Repository.

20. Browse the repository and find the starter provider again. It should now contain your new portlet, my_first_portlet, in addition to its original portlets.

Note:

If you make changes to an existing provider or the portlet record, you need to refresh your provider before seeing the changes reflected in your Oracle Portal instance.

8.3.3 Adding Your Portlet to a Page

Your portlet should now be available for adding to pages like any other portlet in the Portlet Repository. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.4 Implementing Information Storage

Oracle Portal provides APIs for storing and retrieving individual portlet preferences, and storing and manipulating temporary data for the current session. Implementing information storage consists of the following:

- Section 8.4.1, "Implementing a Preference Store"

- Section 8.4.2, "Implementing a Session Store"

8.4.1 Implementing a Preference Store

Oracle Portal provides a set of APIs for storing and retrieving individual preferences for each unique portlet instance in a persistent manner. It provides a unique identifier for each individual, a preference store automatically mapped by user, and access mechanisms for storing and retrieving personalization information in your PL/SQL portlets.

By default, when you enable end-user personalization, Personalize appears on the title bar of your portlet. This link displays a form where users can choose settings for that portlet.

End-user personalization options are available through the wwpre_api_name and wwpre_api_value packages.

8.4.1.1 Using a Preference Store

In general, you can set up preference storage as follows:

1. Create the preference path using wwpre_api_name.create_path.

2. Create the preference using wwpre_api_name.create_name.

3. Set the preference values by providing the preference name and scoping level for which you want to set the value. Use wwpre_api_value.set_value_as_varchar2, set_value_as_number, or set_value_as_date for this purpose.

4. Get preference values by providing the preference name and path whenever you want to retrieve the preference value. Use wwpre_api_value.get_value_as_varchar2, get_value_as_number, or get_value_as_date for this purpose.

8.4.1.2 Creating and Accessing a Preference Store

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement preference storage. The objective is to achieve the following functionality:

- When a user clicks Personalize, they can enter text in two fields.

- The first field prompts for personalized text. The second prompts for a personalized portlet title.

- The values the user enters for these two fields are stored in the preference store.

- The personalized text and portlet titles are retrieved whenever that user invokes the portlet instance.

You can browse through this example as follows to see how to create the preference store, store values in it, and retrieve values from it:

1. Open the services_portlet.pkb file in an editor.
The portlet path and preference names are provided with aliases in the constants part of your portlet definition.

DOMAIN           constant varchar2(30) := 'provider';
SUBDOMAIN        constant varchar2(32) := 'services';
PORTLET_PATH     constant varchar2(256):= 'oracle.portal.pdk.servicesportlet.';
PREFNAME_STRING  constant varchar2(30) := 'services_string';
PREFNAME_TITLE   constant varchar2(30) := 'services_title';

2. Find the register procedure. Your portlet needs to create a path for storing preferences. To do so, it calls wwpre_api_name.create_path for creating the preference path. It then calls wwpre_api_name.create_name for creating the preference name, taking the portlet path, name, and description as input parameters. Another input parameter is the p_type_name that indicates special value types. The NLSID type indicates that the value stored is an NLS id. The functions for setting and retrieving this type treat it as a number value. Apart from that, when a preference store value of this type is exported or copied, so are its associated strings. The last input parameter, the language, is obtained from a context API.

procedure register
(
p_portlet_instance in wwpro_api_provider.portlet_instance_record
)
is
begin
--
-- Create a path for the portlet instance.  This is used to create
-- the preferences for the portlet instance in the preference store.
--
wwpre_api_name.create_path(
p_path => PORTLET_PATH || p_portlet_instance.reference_path
);
--
-- Create the names to store the portlet preferences.
--
wwpre_api_name.create_name(
p_path        => PORTLET_PATH
|| p_portlet_instance.reference_path,
p_name        => PREFNAME_STRING,
p_description => 'Single custom row in '
|| 'Introductory Example portlet.',
p_type_name   => 'NLSID',
p_language    => wwctx_api.get_nls_language);
wwpre_api_name.create_name(
p_path        => PORTLET_PATH
|| p_portlet_instance.reference_path,
p_name        => PREFNAME_TITLE,
p_description => 'Single custom row in '
|| 'Introductory Example portlet.',
p_type_name   => 'NLSID',
p_language    => wwctx_api.get_nls_language);
exception
when others then
raise;
end register;

3. The deregister procedure must eliminate the preference store with a call to wwpre_api_name.delete_name.

procedure deregister
(
p_portlet_instance in wwpro_api_provider.portlet_instance_record
)
is
begin
--
-- Delete the path used by the portlet instance.  This will delete
-- all the names and all the values associated with the path.
--
wwpre_api_name.delete_path(
p_path => PORTLET_PATH || p_portlet_instance.reference_path
);
exception
when others then
raise;
end deregister;

4. The portlet must also get and set the values in the preference store using wwpre_api_value.set_value and wwpre_api_value.get_value. Find the get_default_preference function. Notice how this function loads the system level default values from the preference store. The default preferences are associated with an instance. The language strings are set in the database.

function get_default_preference
...
begin
--
-- Try to find a previously entered portlet instance string preference,
-- if any.
-- A portlet instance string preference is stored in the preference
-- store and has a level of SYSTEM_LEVEL_TYPE.
--
p_path       => PORTLET_PATH || p_reference_path,
l_prefs.string_id := to_char(wwpre_api_value.get_value_as_number(
p_name       => PREFNAME_STRING,
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE
));
--
-- If the value returned above is null it is an indication that there
-- is no default string yet.  Initialize the string id to 0 to indicate
-- this and load the default string value.
--
if (l_prefs.string_id is null or to_number(l_prefs.string_id) = 0) then
wwpre_api_value.set_value_as_number(
p_path       => PORTLET_PATH || p_reference_path,
p_name       => PREFNAME_STRING,
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value      => 0
);
...
end get_default_preference;

5. Find the show procedure. Notice the behavior when the portlet is in Edit Defaults or Edit mode. Note also how p_action is populated when the user clicks APPLY, CANCEL, or OK. Once the form is submitted, the show procedure of the portlet is called again and, if the p_action parameter is not null, then the save_prefs procedure is called to save the personalizations and redirect to the relevant page.

procedure show
(
p_portlet_record        wwpro_api_provider.portlet_runtime_record
)
is
l_str varchar2(32000);
l_pref_record preference_record;
l_action   varchar2(10);
l_names    owa.vc_arr;
l_values   owa.vc_arr;
begin
...
elsif (p_portlet_record.exec_mode =
wwpro_api_provider.MODE_SHOW_EDIT)
or (p_portlet_record.exec_mode =
wwpro_api_provider.MODE_SHOW_EDIT_DEFAULTS)
then
wwpro_api_parameters.retrieve(l_names, l_values);
for i in 1..l_names.count loop
if (upper(l_names(i)) = upper('p_string')) then
l_pref_record.string := l_values(i);
elsif l_names(i) = 'p_title' then
l_pref_record.title_string := l_values(i);
elsif l_names(i) = 'p_action' then
l_action := l_values(i);
end if;
end loop;
if (l_action in (ACTION_OK,ACTION_APPLY,ACTION_CANCEL)) then
if (p_portlet_record.exec_mode =
wwpro_api_provider.MODE_SHOW_EDIT) then
save_prefs(p_string => l_pref_record.string,
p_title  => l_pref_record.title_string,
p_action => l_action,
p_level  => wwpre_api_value.USER_LEVEL_TYPE,
p_portlet_record  => p_portlet_record);
else
save_prefs(p_string => l_pref_record.string,
p_title  => l_pref_record.title_string,
p_action => l_action,
p_level  => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_portlet_record  => p_portlet_record);
end if;
else
show_edit(p_portlet_record  => p_portlet_record);
end if;
...
end show;

6. The show_edit procedure renders the page for Edit or Edit Defaults mode. It renders two text fields that allow the user to change the personalizable values in a form with three buttons (Apply, OK, and Cancel). Note that this function uses the wwpro_api_adapter.open_form to create the HTML form with the correct action attribute for the <FORM> tag and with the correct hidden fields. It is important to use this procedure to create the <FORM> tag if you want to use the portlet with the Federated Portal Adapter from remote Oracle Portal instances.

procedure show_edit
(
p_portlet_record in wwpro_api_provider.portlet_runtime_record
)
is
l_prefs    preference_record;
l_text_prompt_string  varchar2(30);
l_title_prompt_string varchar2(30);
begin
...
htp.centeropen;
htp.tableOpen(cattributes => 'BORDER="1" WIDTH=90%');
htp.tableRowOpen;
htp.p('<TD>');
--
--  This procedure call creates the <FORM> tags with a set of
--  standard parameters.  Using this procedure makes the
--  personalization page work through the pl/sql http adapter.
--
wwpro_api_adapter.open_form(p_formattr => 'NAME="services"',
p_prr      => p_portlet_record);
htp.p('</TD>');
htp.tableRowClose;
htp.tableClose;
htp.centerclose;
htp.formclose;
end show_edit;

7. Review the following procedures and functions, which are related to the preference storage implementation in this example:

- get_user_preference retrieves the user personalized string and title for the portlet.

- save_prefs is invoked to save the preferences to the preference store when the user clicks OK or Apply after making personalization changes.

- entered_text_is_valid checks to see if the text entered in the personalizable text fields is valid.

8. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

9. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.4.2 Implementing a Session Store

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement a session store. The objective is to achieve the following functionality:

- When a user invokes this portlet, it displays text that reads: "This portlet has rendered x times in this session." x is the number of times the portlet has been rendered.

- Every time the user invokes the portlet, the counter increases by 1.

- Clicking Details in the portlet enables the user to reset the counter using Clear. After clearing the counter, the counter starts again from zero.

Creating and Accessing a Session Store

You can browse through this example as follows to see how to create the session store, store values in it, and retrieve values from it:

1. Open the services_portlet.pkb file in an editor.
The domain and subdomain definitions for your session object are provided with aliases in the constants part of your portlet definition.

DOMAIN           constant varchar2(30) := 'provider';
SUBDOMAIN        constant varchar2(32) := 'services';
PORTLET_PATH     constant varchar2(256):= 'oracle.portal.pdk.servicesportlet';
PREFNAME_STRING  constant varchar2(30) := 'services_string';
PREFNAME_TITLE   constant varchar2(30) := 'services_title';

2. Find the clear_count procedure. clear_count is called from the show procedure when the user clicks Clear to reset the counter. clear_count calls wwsto_api_session.load_session to load the session object. Then, it calls wwsto_api_session.set_attribute to set the counter to zero. Lastly, it saves the session object by calling save_session.

procedure clear_count
(
p_action          in varchar2,
p_back_url        in varchar2,
p_reference_path  in varchar2
)
is
ex_counter integer;
session_parms &&1..wwsto_api_session;
begin
--
-- Clear the display counter.
--
if (p_action = ACTION_CLEAR) then
--
-- Load the session object that contains the display counter
--
session_parms :=
&&1..wwsto_api_session.load_session (DOMAIN,SUBDOMAIN);
ex_counter :=
session_parms.get_attribute_as_number(
'ex_counter' || p_reference_path);
--
-- Reset the display counter.
--
ex_counter := 0;
session_parms.set_attribute(
'ex_counter' || p_reference_path, ex_counter);
--
-- Save the changes to the database immediately to avoid any
-- data consistency problems with the data stored in the
-- session object.
--
session_parms.save_session;
end if;
owa_util.redirect_url(curl=>p_back_url);
end clear_count;

3. Find the show_contents procedure. show_contents is called from the show procedure to retrieve the counter, increment it by one, and save the value in the session store. Notice how it retrieves the session object to display the number of times the user has rendered the portlet. It also retrieves the counter value with get_attribute_as_number and increments the counter for every invocation of this procedure.

procedure show_contents
(
p_portlet_record  wwpro_api_provider.portlet_runtime_record
)
is
l_prefs preference_record;
session_parms &&1..wwsto_api_session;
ex_counter integer;
l_portlet wwpro_api_provider.portlet_record;
l_str varchar2(32000);
begin
--
-- In this mode a session counter is used to indicate
-- the number of invocations of this portlet during the
-- current session.  The counter is stored in the session
-- store.
--
session_parms :=
&&1..wwsto_api_session.load_session(DOMAIN,SUBDOMAIN);
ex_counter    :=
session_parms.get_attribute_as_number(
'ex_counter' || p_portlet_record.reference_path);
if (ex_counter is null) then -- first invocation
session_parms.set_attribute(
'ex_counter' || p_portlet_record.reference_path,1);
ex_counter := session_parms.get_attribute_as_number(
'ex_counter' || p_portlet_record.reference_path);
else -- on every invocation increase by 1
ex_counter := ex_counter + 1;
session_parms.set_attribute(
'ex_counter'
|| p_portlet_record.reference_path, ex_counter);
end if;    session_parms.save_session;
...
end show_contents;

4. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

5. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.5 Using Parameters

The functionality of portlets can be extended with the help of parameters. The business logic implemented by portlets may produce different HTML output depending on the parameters passed to the page. By using portlet parameters, you can navigate within the portlet in Shared Screen mode without changing the current page. Portlets can also communicate with each other through parameters.

Portlet parameters are structured as name-value pairs. These pairs map directly to the URL parameter passing format by using the GET submission method or can use the HTTP message body by using the POST submission method. Portlets can also expose their parameters to Oracle Portal. When added to a page, these portlets can accept values in the form of page parameters created by the page designer.

Note:

Portlet parameter names should not start with an underscore (_) because those parameters are reserved for internal use by Oracle Portal and are not passed to the portlet.

Portlets do not have direct access to the URL, the HTTP message body, or the page parameters. To retrieve the parameter values, portlets must call the Oracle Portal PL/SQL parameter APIs provided in the wwpro_api_parameters package.

Oracle Portal offers the following types of parameters:

Caution:

You cannot mix the usage of public and private parameters in a portlet. To enable public parameters for your portlet, you must take steps that preclude the usage of private parameters and vice versa.

- Private portlet parameters enable the implementation of internal navigation in your portlet.

- Public portlet parameters let you pass control over the data flow of your portlet to the page designer. The page designer can map the public portlet parameters to their page parameters, provide default values, and allow users to personalize those values.

- Page parameters are defined in a simple user interface by page designers. These page parameters can be mapped to public portlet parameters in order for the page designer to pass parameter values from the page to the portlets on it.

For more information about parameters, refer to Section 2.12, "Public Portlet Parameters Support" and Section 2.13, "Private Portlet Parameter Support".

8.5.1 Passing Private Parameters

You can use either GET or POST HTML submission methods when passing private portlet parameters. The GET method uses the URL to pass the parameters, whereas the POST method places the parameters in an HTTP message body. For both methods, you must specify the portlet instance on the portal page, how the parameter is called, and the value of the parameter.

There are the following two types of private portlet parameters:

- Qualified parameters ensure that a private portlet parameter is not read by any other portlet on the page. The reference path, which is assigned when the portlet is added to a page, is the unique prefix of the parameter. For example, http://page_url?277_MAP_368673.region=Europe. The qualified parameter's reference path is 277_MAP_368673, the name is region, and the value is Europe. For private parameters, we strongly recommend that you always use qualified parameters.

- Unqualified parameters have no information about the portlet instance and can be read by any portlet on the page. For example, http://page_url?region=Europe. The unqualified parameter's name is region and its value is Europe. For private parameters, we strongly recommend that you avoid unqualified parameters.

8.5.2 Passing Page Parameters and Mapping Public Portlet Parameters

Public portlet parameters enhance the flexibility of your portlets by enabling page designers to reuse your portlets on multiple pages. As a result, page designers do not have to ask you to make changes to the portlet code when adding the portlet to different pages. By using public portlet parameters, any portlet on a page can easily receive its value from the mapped page parameter, regardless of the portlet parameter name.

For example, suppose you have a page parameter named dept_id. Three portlets need this value, but one portlet calls it dept, another calls it deptno, and still another department_id. Mapping the page parameter enables all three portlets to receive the value from the dept_id parameter and place it in the appropriate portlet parameter. Furthermore, the page designer may set a default value (for example, department 20) that can be personalized by users (for example, department 30) and applied to all three portlets.

The general model for passing public and page parameters is as follows:

1. Enable public parameters in the portlet record by setting pass_all_url_params to false. This ensures that the portlet is only passed parameters intended for that portlet.

2. Declare the public parameters in the provider's describe_portlet_parameters function. For each of the portlets that belong to the provider, this procedure should return a list of the parameters that the portlet accepts in the form of a PL/SQL table of records of the type:

type portlet_parameter_table is table ofportlet_parameter_record index by binary_integer;

3. Provide descriptive information for the parameters in the portlet's describe_parameters function. For example:

function describe_parameters
(p_provider_id in integer, p_language in varchar2)
return wwpro_api_provider.portlet_parameter_table
is
l_params wwpro_api_provider.portlet_parameter_table;
begin
l_params(1).name := 'dept_id';
l_params(1).datatype := wwpro_api_provider.STRING_TYPE;
l_params(1).description := 'Defines a department ID';
l_params(1).display_name := 'Department ID';
return l_params;
end describe_parameters;

4. Assign values to the public parameters. Public parameters typically get their values through page parameters. Page parameters are usually assigned default values by the page designer and the user can then personalize the value at runtime. Alternatively, page parameter values can be assigned in the calling URL. For more information about how page designers can use page parameters, refer to the Oracle Fusion Middleware User's Guide for Oracle Portal.

8.5.3 Retrieving Parameter Values

Regardless of whether you are using private or public parameters, you use the same APIs to retrieve their values. Portlets obtain their parameters by calling the following PL/SQL parameter APIs in the wwpro_api_parameters package:

- wwpro_api_parameters.get_value returns the parameter value that is specified by a given parameter name. Parameter names are not case sensitive, whereas parameter values are case sensitive. For example:

l_region := wwpro_api_parameters.get_value
(p_name => 'region',
p_reference_path => p_portlet_record.reference_path);

- wwpro_api_parameters.get_values returns an array of parameter values. This function returns all the values that are associated with a single parameter name or an empty list if no matches are found. Some business logic may require multiple selections, when multiple values are passed to the portlet by using the same parameter name. Portlets can take one or more values of the same parameter. For example:

l_region_values owa.vc_arr;
...
l_region_values := wwpro_api_parameters.get_values
(p_name = 'region',
p_reference_path => p_portlet_record.reference_path);

- wwpro_api_parameters.get_names returns the names of the parameters that are passed on to a specified portlet that is identified by the reference path. The returned list is a PL/SQL table of the owa.vc_ar type that is defined as follows:

type vc_arr is table of varchar2(32000) index by binary_integer;

Note:

Portlet parameter names should not start with an underscore (_) because those parameters are reserved for internal use by Oracle Portal and are not passed to the portlet.

For example:

l_names owa.vc_arr;
...
l_names := wwpro_api_parameters.get_names
(p_reference_path => p_portlet_record.reference_path);

- wwpro_api_parameters.retrieve returns the names and values of all of the portlet's parameters. For example:

procedure show_portlet
( p_portlet_record in out
wwpro_api_provider.portlet_runtime_record )
is
l_names owa.vc_arr;
l_values owa.vc_arr;
...
begin
...
wwpro_api_parameters.retrieve (l_names, l_values);
for i in 1..l_names.count loop
htp.p('Parameter Name: '||l_names(i));
htp.p('Parameter Value: '||l_values(i));
htp.br;
end loop;
...
end show_portlet;

8.6 Accessing Context Information

Whenever a user accesses a page in Oracle Portal, a public session is established. When the user logs in to Oracle Portal, the public session becomes an authenticated session. This session contains several pieces of context information about the user, such as user name, current session ID, IP address, and language preference. It also includes supporting information such as the Oracle Portal schema currently in use.

Session context services return information about a user's session and are available through the wwctx_api package.

8.6.1 Using Context Information

The general model for working with the session context is as follows:

1. Identify the piece of information you require for your functionality.

2. Use the appropriate method from wwctx_api to get and optionally set this value.

Table 8-5 lists the function calls used to obtain the various pieces of session information.

Note:

For more information on the context APIs, see the PL/SQL API Reference. The API Reference can be found on Portal Center (http://portalcenter.oracle.com) or, if you downloaded PDK-PL/SQL (pdkplsql.zip), in ..\pdkplsql\pdk\plsql\doc.

Table 8-5 Context Information Function Calls

Session Information

Function Call

Current user

wwctx_api.get_user

Login status of user

wwctx_api.is_logged_on

Login time

wwctx_api.get_login_time

Language

wwctx_api.get_nls_language

Current session id

wwctx_api.get_sessionid

IP address of user client

wwctx_api.get_ip_address

User schema

wwctx_api.get_db_user

Oracle Portal schema

wwctx_api.get_product_schema

Oracle Portal version

wwctx_api.get_product_version

8.6.2 Using wwctx_api to Obtain Context Information

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can obtain session information using the wwwctx_api package. You can browse through this example as follows to see how the function calls are implemented in a portlet:

1. Open the services_portlet.pkb file in an editor.

2. Find the get_portlet_info function.

3. Notice the usage of wwctx_api.get_user to derive the user information and set that value in the portlet information record:

...
l_portlet.timeout              := null;
l_portlet.timeout_msg          := null;
l_portlet.created_on           := to_date('10/19/2000', 'MM/DD/YYYY');
l_portlet.created_by           := wwctx_api.get_user;
l_portlet.last_updated_on      := to_date('10/19/2000', 'MM/DD/YYYY');
l_portlet.last_updated_by      := wwctx_api.get_user;
l_portlet.has_show_edit_defaults := true;
l_portlet.has_show_preview     := true;
l_portlet.preference_store_path := PORTLET_PATH;
...

4. wwctx_api.get_user is used similarly in various places throughout services_portlet.pkb. Search the code for other occurrences of wwctx_api.get_user.

5. Another example of getting context information occurs in the is_runnable function:

function is_runnable
(
p_provider_id in integer
,p_reference_path in varchar2
)
return boolean
is
begin
--
-- Portlet security check.  It allows the portlet to be visible
-- if the user is logged on, that is, the current session is not a
-- public session.
--
return wwctx_api.is_logged_on;
end is_runnable;

6. In the register procedure, wwctx_api.get_nls_language is used to get the language:

--
-- Create the names to store the portlet preferences.
--
wwpre_api_name.create_name(
p_path        => PORTLET_PATH
|| p_portlet_instance.reference_path,
p_name        => PREFNAME_STRING,
p_description => 'Single custom row in '
|| 'Introductory Example portlet.',
p_type_name   => 'NLSID',
p_language    => wwctx_api.get_nls_language);
wwpre_api_name.create_name(
p_path        => PORTLET_PATH
|| p_portlet_instance.reference_path,
p_name        => PREFNAME_TITLE,
p_description => 'Single custom row in '
|| 'Introductory Example portlet.',
p_type_name   => 'NLSID',
p_language    => wwctx_api.get_nls_language);

7. Close services_portlet.pkb. You can implement session context similarly but based upon your own functional requirements.

8. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

9. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.7 Implementing Portlet Security

Portlet security refers to the techniques and methods used by portlets to control their access by end users. The portlets leave authentication to Oracle Portal and trust that the portal will return them to the correct, validated user upon request.

Oracle Portal strictly controls access to information and applications by assigning specific privileges to users and groups. Portal security services allow you to specify access control programmatically and check for the appropriate privileges at runtime. Security mechanisms used by portlets ensure that only authorized users gain access to these portlets. These security services are available through the wwsec_api package.

Portlet security is invoked when a portlet is displayed on a portal page and when a portlet is returned in a portlet list by the get_portlet_list function for database providers. Security services in the Portal framework have the following key features:

- Portlet Display: Before a portlet is displayed on a page, the provider checks for the portlet's access privileges. The provider needs to define the is_portlet_runnable function which calls the portlet's is_runnable function to check access privileges.

- User Group: You can find which default group a user belongs to by using the wwsec_api.get_defaultgroup function.

- Check Privileges: You can find whether a user or group has the required privileges to personalize a portlet by using the wwsec_api.has_privilege function.

- Highest Privilege: You can find the highest available privilege of a user across all groups by using the wwsec_api.get_privilege_level function.

- Accessible Objects: You can find all the objects to which a user has access, given a privilege level, by using the wwsec_api.accessible_objects function. You can find other similar associated functions in the API documentation. The API Reference can be found on Portal Center (http://portalcenter.oracle.com) or, if you downloaded PDK-PL/SQL (pdkplsql.zip), in ..\pdkplsql\pdk\plsql\doc.

8.7.1 Using Security

To implement PL/SQL portlet security, the portal requires the function is_portlet_runnable be implemented by database providers. The actual implementation of this function is up to the application; that is, the security scheme that determines whether the current user has enough privileges to access the portlet is defined by the individual portlet implementation. The portal also requires the function get_portlet_list for database providers to return the set of portlets that are accessible by the current user.

Guidelines for Using the Security APIs

The portlet security mechanism may use the context and security subsystem APIs and infrastructure. The context APIs can be used to retrieve information about the current user. The security subsystem can be used to check the privileges of the current user.

Note:

For more information on the context and security subsystem APIs, see the PL/SQL API Reference. The API Reference can be found on Portal Center (http://portalcenter.oracle.com) or, if you downloaded PDK-PL/SQL (pdkplsql.zip), in ..\pdkplsql\pdk\plsql\doc.

While using these APIs, keep in mind the following:

- Only authorized users should be able to see your portlet in the Add Portlet dialog. This objective can be accomplished by implementing the is_portlet_runnable function in the provider. You can also allow public access to your portlet.

- If a portlet does not want to render itself to a user, it should return no HTML or return an exception that the page engine will ignore. It should not return an error message. Doing so adds unnecessarily to the error stack, which has its limits. Refer to Section 8.9, "Implementing Error Handling" for more information.

- Portlet security allows the portlet to perform a runtime security check to ensure that the current user has the necessary authorization to access the portlet.

- When a portlet is rendered in Show mode, it may call the is_runnable function for database providers to determine whether the portlet should be displayed for the currently logged on user. The portal does not make the call to this function directly. It is not a requirement, however, for the portlet to make this call. The portlet should make this call in its Show mode only if it implements portlet security.

- The result of the call to is_runnable determines whether the portlet is actually displayed. If the result is true, the portlet displays; otherwise it does not display. The portlet is rendered in Show mode when it is displayed in a portal page.

- When a portlet is returned in a portlet list by a call to the provider function get_portlet_list, the value of the p_security_level parameter determines the purpose of the function call. When the call is made from the Portlet Repository refresh operation in order to retrieve the master list of portlets that the provider implements, the parameter p_security_level has a value of false. This setting indicates to the provider that no portlet security check should be made and a master list of all the portlets that the provider implements must be returned. The master list of portlets returned in this case is used to populate the Portlet Repository for that provider.

- If the value of p_security_level is true, then it is up to the provider implementation to decide whether portlet security should be performed. If portlet security is implemented, the provider may return a different list of portlets depending on the current user.

- When the Portlet Repository is displayed, Oracle Portal calls the is_portlet_runnable function for database providers for each of the portlets that exist in the Portlet Repository. This step is done to display only the portlets that the currently logged on user is authorized to see. One example where the Portlet Repository is displayed is in the Add Portlets dialog.

8.7.2 Coding Security

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement security. You can browse through this example as follows to see how the security functions are implemented in a portlet:

1. Open the services_provider.pkb file in an editor.

2. Find the is_portlet_runnable function. This function calls the security implementation through the portlet's is_runnable function to check portlet access privileges.

function is_portlet_runnable
(
p_portlet_instance in wwpro_api_provider.portlet_instance_record
)
return boolean
is
begin
if (p_portlet_instance.portlet_id = SERVICES_PORTLET_ID) then
return services_portlet.is_runnable(
p_provider_id     =>  p_portlet_instance.provider_id
,p_reference_path  =>  p_portlet_instance.reference_path
);
else
raise wwpro_api_provider.PORTLET_NOT_FOUND_EXCEPTION;
end if;
end is_portlet_runnable;

3. Find the get_portlet_list procedure. get_portlet_list allows the portlet to be included in the list of portlets implemented by this provider. get_portlet_list first checks the security flag (p_security_level) to find out whether security is enabled. If the flag is set to true, get_portlet_list uses is_runnable to check whether the portlet is accessible. The value of the p_security_level parameter indicates whether to perform security checks before returning a portlet in the list. When a portlet repository refresh operation retrieves the master list of portlets implemented by the provider, p_security_level has a value of false. A value of false means the provider does not need to perform a security check and that a master list of all of the portlets implemented by the provider must be returned. The master list of portlets returned is used to populate the portlet repository for that provider. If the value of p_security_level is true, then the provider implementation decides whether to perform portlet security checks. If portlet security is implemented, the provider may return a different list of portlets depending on the currently logged on user.

function get_portlet_list
...
if (p_security_level = false) then
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => SERVICES_PORTLET_ID
,p_language     => p_language
);
else
if (services_portlet.is_runnable(
p_provider_id     =>  p_provider_id
,p_reference_path  =>  null)
) then
l_cnt := l_cnt + 1;
l_portlet_list(l_cnt) := get_portlet(
p_provider_id  => p_provider_id
,p_portlet_id   => SERVICES_PORTLET_ID
,p_language     => p_language
);        end if;
...
end get_portlet_list;

4. Open the services_portlet.pkb file in an editor.

5. Find the show procedure. Before displaying a portlet, the show procedure runs a security check to determine whether the current user is allowed to see the portlet.

procedure show
...
-- Perform a security check
if (not is_runnable(
p_provider_id     =>  p_portlet_record.provider_id
,p_reference_path  =>  p_portlet_record.reference_path)
) then
wwerr_api_error.add(
DOMAIN, SUBDOMAIN,
'securityerr', 'services_portlet.show');
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;    end if;
...
end show;

6. Find the is_runnable function. is_runnable is the place where you implement your security checks. In this example, the security check is quite simple. If the user is logged on (that is, not in a public session), then the function returns true and the portlet is displayed to the user. For your own purposes, you could, of course, code much more complex security checks in the is_runnable function.

function is_runnable
(
p_provider_id in integer
,p_reference_path in varchar2
)
return boolean
is
begin
--
-- Portlet security check.  It allows the portlet to be visible
-- if the user is logged on, that is, the current session is not a
-- public session.
--
return wwctx_api.is_logged_on;
end is_runnable;

7. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

8. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.8 Improving Portlet Performance with Caching

Oracle Portal provides for the caching of PL/SQL portlets. This functionality permits PL/SQL portlets to cache their Web content on the middle tier. Subsequent requests for the content may be retrieved from the cache, with or without validation from the database, decreasing the database workload.

Oracle Portal provides three types of caching for your PL/SQL portlets:

- Validation-based caching compares a key value to check whether the contents of the cache are still valid. If the key value does not change, it uses the cached content. Otherwise, it makes a round trip to the portal node to fetch the portlet content.

- Expiry-based caching uses a given expiration period for the contents of the cache when rendering the portlet. This form of caching is useful for content that changes infrequently or at very regular intervals (for example, every day at the close of business).

- Invalidation-based caching is the most complex form of caching but also the most flexible. The objects in Oracle Web Cache are considered valid as long as they are not invalidated explicitly. You can also combine invalidation-based caching with either expiry-based or validation-based caching.

Because Oracle Portal supports user personalization of pages and portlets, the view of a page can vary from one user to another. Oracle Portal's caching is designed to allow content to vary on a per-user basis, even if the URL is the same across all users. Therefore, portal objects can be cached at either the user level or the system level and can be described as follows:

- User-level caching is for a specific user. The cache entries are unique for that user and cannot be accessed by other users.

- System-level caching is for all users. One cache entry is used for all users. Examples of content that might be suitable for system-level caching are page banners and news portlets.

When a database provider issues a request for a portlet, the request is sent to the portlets's show procedure. This procedure accepts the portlet_runtime_record as a parameter. This record structure contains fields that can be examined and set by the portlet to enable caching. The caching control fields of this record are as follows:

- caching_key: This value is communicated in the ETAG header for this request and returned back to the portlet provider in subsequent requests. Setting this field enables validation-based caching.

- caching_period: This field enables expiry-based caching. The value is the number of minutes the content should be held in the cache. This mode overrides validation-based caching. If a value is set for this field, then the caching_key field is ignored.

- caching_level: This field defines whether the content is meant for general use or for a specific user. The valid values are SYSTEM and USER.

8.8.1 Using Caching

The general model for working with portlet caching varies according to the type of caching you choose. To a great extent, the type of caching you choose depends on the portlet content. If the portlet content changes at fairly regular intervals (for example, at the close of business every day), then it probably makes sense to use expiry-based caching. If the portlet content changes at irregular intervals, then validation- or invalidation-based caching is probably best.

8.8.1.1 Validation-Based Caching

If you choose validation-based caching, the general model is as follows:

1. Set the caching_key field of the portlet_runtime_record parameter. Add a check to compare the value of the current key with the value of the caching_key field of the portlet_runtime_record parameter. Note that the first time the show procedure is called, the key is null and its value must be set.

2. Determine whether you want to use system or user level caching. Set the caching_level field of the portlet_runtime_record parameter accordingly.

8.8.1.2 Expiry-Based Caching

If you choose expiry-based caching, the general model is as follows:

1. Set the caching_period field of the portlet_runtime_record parameter to the desired interval for the cache (in minutes).

2. Determine whether you want to use system or user level caching. Set the caching_level field of the portlet_runtime_record parameter accordingly.

8.8.1.3 Invalidation-Based Caching

If you choose invalidation-based caching, the general model is as follows:

1. Indicate to Oracle Portal that it must generate specific headers for Oracle Web Cache by calling wwpro_api_provider.USE_INVALIDATION.

2. Determine whether you want to use system or user level caching. Set the caching_level field of the portlet_runtime_record parameter accordingly.

3. Optionally, set up validation- or expiry-based caching as well.

4. Add invalidation logic to your portlet where needed (for example, when the portlet is personalized) and make appropriate calls to wwpro_api_invalidation.

8.8.2 Configuring and Monitoring the Cache

The Oracle Fusion Middleware Administrator's Guide for Oracle Portal describes how to configure caching as well as how to monitor and tune performance.

8.8.3 Implementing Validation-Based Caching

The caching example, located in ..\pdkplsql\pdk\plsql\cache in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement validation and expiry-based caching. You can browse through this example as follows to see how the validation-based functions are implemented in a portlet:

1. Open the validcache_portlet.pkb file in an editor.

2. At the very top of the file, notice the aliases for the caching level constants.

CREATE OR REPLACE
package body VALIDCACHE_PORTLET
is
-- Caching Constants
CACHE_LEVEL_SYSTEM constant varchar2(10) := 'SYSTEM';
CACHE_LEVEL_USER   constant varchar2(10) := 'USER';

3. Find the show procedure. Notice first that the p_portlet_record is an in and out parameter for this procedure.

procedure show
(
p_portlet_record   in out     wwpro_api_provider.portlet_runtime_record
)

4. In the procedure's security check, the caching fields of p_portlet_record are set to null if the security check fails.

begin
if (not is_runnable(
p_provider_id      => p_portlet_record.provider_id
,p_reference_path   => p_portlet_record.reference_path)
) then
-- Set it to null so that cache does not get used even if exists
p_portlet_record.caching_level := null;
p_portlet_record.caching_key := null;
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;    end if;

5. After that, the procedure calls the get_cache_key function to get the cache key's value and assign it to a temporary value:

--
-- CACHE IS VALID?
--
l_cache_key := get_cache_key();

6. Find the get_cache_key function, which is referenced from the show procedure. This function generates a key for the portlet. You can implement your own logic here based upon your portlet's requirements.

function get_cache_key
return varchar2
is
l_date date;
begin
select sysdate into l_date from  dual;
return trim(substr(to_char(l_date, 'YYYY:MM:DD:HH:MI:SS'),1,18));
exception
when others then
null;
end get_cache_key;

7. Now return to the show procedure. Notice how the code checks your portlet_runtime_record parameter for the current values of the caching_key and the caching_level. This same piece of code can compare your caching_key values.

if p_portlet_record.caching_level = CACHE_LEVEL_SYSTEM then
if l_cache_key is not null then
-- Cache exists for the user, overwrite it
p_portlet_record.caching_level := CACHE_LEVEL_USER;
p_portlet_record.caching_key := l_cache_key;
else
return; -- System cache is still valid.
end if;
elsif p_portlet_record.caching_level = CACHE_LEVEL_USER then
if p_portlet_record.caching_key != l_cache_key then
-- cache has expired. reset it
p_portlet_record.caching_key := l_cache_key;
else
return; -- User cache is good as gold
end if;
elsif p_portlet_record.caching_level is null then
if p_portlet_record.caching_key is not null then
-- Cache does not exists for the user, create it
p_portlet_record.caching_level := CACHE_LEVEL_USER;
p_portlet_record.caching_key := l_cache_key;
else
-- Define a sytem cache. This can happen only once!
-- the first time the portlet is rendered.
p_portlet_record.caching_level := CACHE_LEVEL_SYSTEM;
p_portlet_record.caching_key := 'MY_INITIAL_CACHE_KEY';
end if;
else
p_portlet_record.caching_level := CACHE_LEVEL_SYSTEM;
p_portlet_record.caching_key := 'MY_INITIAL_CACHE_KEY';
end if;

8. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

9. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.8.4 Implementing Expiry-Based Caching

The caching example, located in ..\pdkplsql\pdk\plsql\cache in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement expiry-based caching. You can browse through this example as follows to see how the expiry-based functions are implemented in a portlet:

1. Open the expirycache_portlet.pkb file in an editor.

2. At the very top of the file, notice the aliases for the caching level constants.

CREATE OR REPLACE
package body VALIDCACHE_PORTLET
is
-- Caching Constants
CACHE_LEVEL_SYSTEM constant varchar2(10) := 'SYSTEM';
CACHE_LEVEL_USER   constant varchar2(10) := 'USER';

3. Find the show procedure. Notice first that the p_portlet_record is an in and out parameter for this procedure.

procedure show
(
p_portlet_record   in out     wwpro_api_provider.portlet_runtime_record
)

4. In the procedure's security check, the caching fields of p_portlet_record are set to null if the security check fails.

begin
if (not is_runnable(
p_provider_id      => p_portlet_record.provider_id
,p_reference_path   => p_portlet_record.reference_path)
) then
-- Set it to null so that cache does not get used even if exists
p_portlet_record.caching_level := null;
p_portlet_record.caching_key := null;
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;    end if;

5. After that, the procedure sets the value of the caching period in minutes in a temporary variable:

-- Set the Caching Period to one minute
l_cache_period := 1;

6. Next, notice how the code checks your portlet_runtime_record parameter for the current values of the caching_period and sets the caching_period accordingly. This same piece of code can compare your caching_period values.

if p_portlet_record.caching_level = CACHE_LEVEL_SYSTEM then
-- Cache does not exists for the user, create it
p_portlet_record.caching_level := CACHE_LEVEL_USER;
p_portlet_record.caching_period := l_cache_period;
elsif p_portlet_record.caching_level = CACHE_LEVEL_USER then
-- Cache exists for the user, overwrite it
p_portlet_record.caching_period := l_cache_period;
elsif p_portlet_record.caching_level is null then
if p_portlet_record.caching_period  is not null then
-- Cache does not exists for the user, create it
p_portlet_record.caching_level := CACHE_LEVEL_USER;
p_portlet_record.caching_period := l_cache_period;
else
-- Define a sytem cache. This can happen only once!
p_portlet_record.caching_level := CACHE_LEVEL_SYSTEM;
p_portlet_record.caching_period := l_cache_period;
end if;
else -- p_portlet_record.caching_level value is messed up!
p_portlet_record.caching_level := CACHE_LEVEL_SYSTEM;
p_portlet_record.caching_period := l_cache_period;   end if;

7. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

8. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.8.5 Implementing Invalidation-Based Caching

Suppose you have a portlet that displays a map of the world, map_portlet.pkb and map_portlet.pks. You would go about adding invalidation-based functions to it as follows:

1. In the show procedure, you need to add a call to wwpro_api_provider.use_invalidation. This call indicates to Oracle Portal that the portlet content should be cached by Oracle Web Cache. Note that we have also specified that the content be cached at the user level and that expiry-based caching be used as well (that is, an expiration interval of one minute has been set).

procedure show
...
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
p_portlet_record.caching_invalidation :=
wwpro_api_provider.use_invalidation;
p_portlet_record.caching_level := 'USER';
p_portlet_record.caching_period := 1;
...

2. Create a procedure in your map_portlet.pkb file that invalidates the cache. For example:

procedure map_invalidation
(
p_provider_id in number,
p_portlet_id in number,
p_instance_id in varchar2,
p_page_url in varchar2
)
is
begin
wwpro_api_invalidation.invalidate_by_instance
(p_provider_id => p_provider_id,
p_portlet_id =>  p_portlet_id,
p_instance_id => p_instance_id,
p_user => wwctx_api.get_user);
owa_util.redirect_url(p_page_url);
end map_invalidation;

3. In the show procedure, add a link for refreshing the portlet before the code that draws the map. For example:

/* Draw the Refresh Me link */
htp.anchor(
curl => wwctx_api.get_user||
'.map_invalidation?p_provider_id='||p_portlet_record.provider_id||
'&p_portlet_id='||p_portlet_record.portlet_id||
'&p_instance_id='||p_portlet_record.reference_path||
'&p_page_url='||utl_url.escape(
url => p_portlet_record.page_url,
escape_reserved_chars => TRUE),
ctext => wwui_api_portlet.portlet_text(
p_string =>'Refresh Me',
p_level => 1)
);

4. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

5. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.9 Implementing Error Handling

Oracle Portal provides the capability for you to trap erroneous input and return meaningful error messages. It manages the internal error stack by tracking the raised exceptions and retaining information about them. Oracle Portal also includes a set of APIs for presenting errors in a standardized way.

Error handling services are available through the wwerr_api_error and wwerr_api_error_ui packages. These error handling services include the following key features:

- Error stack. Oracle Portal uses an error stack to keep track of the error messages. When an error occurs, the error message is pushed onto an error stack. Whenever procedures or function calls are nested, the error stack keeps track of all the error messages. You can choose to retrieve only the top error (or most recent error) by using the wwerr_api_error.get_top method. Alternatively, you can get all the error messages on the stack using the wwerr_api_error.get_errors function. The stack can also be checked for the presence of any errors by calling the wwerr_api_error.is_empty function.

- Error messages. Error handling services provide a way to define meaningful error messages. To define your own error messages, you need to define their name space. The name space consists of the following:

- Name is the error name.

- Domain is the area of the product where the error occurred.

- Subdomain is the subsystem where the error occurred.

- Context is the name of the function where the error occurred.

The name space uniquely identifies your error message. If it does not do so, a wwc-0000 error message is generated.

The default domains include the portal (WWC), application (WWV), and page groups (WWS). Each domain is further classified into subdomains, which define the object types. The portal domain includes the portlet, page, and document object types. The application domain includes object types such as forms, menus, reports, and charts. The page group domain includes object types such as pages, items, categories, and perspectives. If you need to define an error that does not fall within these classifications, you can define your own domain with subdomains for your errors.

- Message parameters. The other language strings that you create for your errors can take substitution parameters for your messages. The p1, p2, p3... parameters can be used to pass substitution parameters to the error messages. For example, for this string:

(domain='yahoo', subdomain='provider', name='generalerror', string='Error: %1')

an error can be added as follows:

wwerr_api_error.add(p_domain=>'yahoo',  p_sub_domain=>'provider',
p_name=>'generalerror',  p_context=>'yahoo.show',  p1=> sqlerrm);

- Error display. The wwerr_api_error_ui package provides a means to generate a standard user interface for displaying the errors in Oracle Portal. The error messages can be displayed in the following two ways:

- Full screen user interface: These error messages are displayed in a full screen mode. You may want to display full screen errors when the system encounters fatal or show-stopper errors.

- Inline user interface: These error messages are displayed within the current page itself. You may use inline errors for minor errors or warnings.

Additionally, you can choose the output format of the display (HTML, XML, or ASCII text).

8.9.1 Using Error Handling

In general, you set up error handling as follows:

1. On detecting error conditions, add the error message, with an appropriate domain and sub-domain combination, to the stack using the wwerr_api_error.add procedure.

2. When necessary (for example, at the end of a routine), expose the error messages using the wwerr_api_error_ui procedures. To display full screen messages, use the procedures show_html, show_xml, or show_text depending on your preferred output type. To display inline messages, use the procedures show_inline_html, show_inline_xml, or show_inline_text, depending on the output type you desire.

Guidelines for Error Handling

While implementing error handling, keep in mind the following:

- While defining your own error messages, use your own error domain for these messages. Never use the WWC, WWV, or WWS domain for your error messages. You will need to write a small loader script to load these into the other language tables.

- Avoid unnecessary error messages. If you do not want to do anything in a function, just return null rather than an error. For example, suppose you are coding a copy_portlet procedure for your portlet because the provider calls it for all of its other portlets. If you do not wish the copy_portlet procedure for this particular portlet to do anything, then simply have it return null. If you return errors, it will unnecessarily disrupt the portlet functionality.

- A maximum of ten error messages is kept on the stack. Beyond ten, messages are ignored when a call to wwerr_api_error.add is made.

- Use the API as a programmatic way of finding the problem. You can use the non-user-interface format for this purpose. For example, when you programmatically register a provider, the exception block can use get_text_stack to get the error messages and print them. This approach helps when debugging calls to public APIs since all of them add errors to the stack for exceptions.

- Remember to seed the other language strings for your error messages. For more information, refer to Section 8.11, "Writing Multilingual Portlets".

- The standard user interface for error messages provides a navigation link back to the previous page. It also includes a Help icon for the specified help URL.

8.9.2 Adding Error Handling

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement error handling. You can browse through the following example to see how the error handling functions are implemented in a portlet:

1. Open the services_portlet.pkb file in an editor.

2. The domain and subdomain definitions for your error messages are provided with aliases in the constants part of your portlet definition.

DOMAIN           constant varchar2(30) := 'provider';
SUBDOMAIN        constant varchar2(32) := 'services';
PORTLET_PATH     constant varchar2(256):= 'oracle.portal.pdk.servicesportlet';
PREFNAME_STRING  constant varchar2(30) := 'services_string';
PREFNAME_TITLE   constant varchar2(30) := 'services_title';

3. Find the show procedure. This procedure performs a security check and, if an error condition arises, it calls wwerr_api_error.add to push the securityerr error message onto the stack.

procedure show
(
p_portlet_record        wwpro_api_provider.portlet_runtime_record
)
is
...
begin
-- Perform a security check
if (not is_runnable(
p_provider_id     =>  p_portlet_record.provider_id
,p_reference_path  =>  p_portlet_record.reference_path)
) then
wwerr_api_error.add(
DOMAIN, SUBDOMAIN,
'securityerr', 'services_portlet.show');
raise wwpro_api_provider.PORTLET_SECURITY_EXCEPTION;
end if;

4. The show procedure also checks for any other kind of execution mode and generates an appropriate error message for an invalid display mode.

if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
...
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW_EDIT)
...
else
wwerr_api_error.add(DOMAIN, SUBDOMAIN,
'invaliddispmode', 'services_portlet.show');
raise wwpro_api_provider.PORTLET_EXECUTION_EXCEPTION;
end if;

5. Lastly, the show procedure implements a general error message in the exception handler to catch any errors not trapped by the preceding conditions.

exception
when others then
wwerr_api_error.add(
DOMAIN, SUBDOMAIN,
'generalerr', 'services_portlet.show');
raise wwpro_api_provider.PORTLET_EXECUTION_EXCEPTION;
end show;

6. Error handling is also implemented in the save_prefs and save_default_prefs procedures. They check whether the error stack is empty and, if it is not, the portlet makes a call to wwerr_api_error.show_html to display the error in full screen mode.

exception
when INVALID_TEXT_EXCEPTION then
l_information := l_user||'%'||l_time
||'%INVALID_TEXT_EXCEPTION%'||p_string;
l_action      := LOG_FAILED;
wwlog_api.log (p_domain      => DOMAIN,
p_subdomain   => SUBDOMAIN,
p_name        => l_user,
p_action      => l_action,
p_information => l_information,
p_url         => l_url,
p_row_count   => 0,
p_elapsed_time=> l_elapsed_time);
wwerr_api_error.add(DOMAIN, SUBDOMAIN,
'invalid_text', 'services_portlet.save_prefs');
if (not wwerr_api_error.is_empty) then
wwerr_api_error_ui.show_html;
end if;
end save_prefs;

7. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

8. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.10 Implementing Event Logging

Oracle Portal can log events that occur during transactions with its objects. It stores these logs in the database, which makes them available through standard SQL calls and reporting tools.

You can choose the events you would like to log and organize them categorically based on user-defined domains and subdomains. For the logged events, you can view information about the event, the time the event started and stopped, the host or IP address of the remote user, the browser type, and the language.

Event logging services are available through the wwlog_api and wwlog_api_admin packages. These services include the following key features:

- Event logs are useful for tracking specific usage of the portal. To track such information, you create a log event. Log events require a name space that consists of the following:

- Name, which is the event name.

- Domain, which is the area of the product where the event occurred.

- Subdomain, which is the subsystem that generated the event.

The default domains include the portal (WWC), application (WWV), and page group (WWS). Each domain is further classified into subdomains that define the object types. The portal domain includes the portlet, page, and document object types. The application domain includes object types such as forms, menus, reports, and charts. The page group domain includes object types such as folders, items, categories, and perspectives. Events themselves could be of types such as add, delete, personalize, hide, copy, execute, and export. If you need to define an event that does not fall within these classifications, you can define your own domain with subdomains for your events.

- Logs can track information in the following two ways:

- Interval logging calculates the elapsed time for the action performed (for example, the time taken to render a portlet).

- Event logging logs the occurrence of a single step event you care about (for example, whenever a user personalizes a portlet).

- Log switching enables you to set a switch interval that defines how long you want to maintain your existing log records. The log information stored in the database uses two different tables. The log records are purged based on the value entered for the Activity Log Interval in the Configuration tab of Global Settings (accessible from the Services portlet in the Portal subtab of the Administer tab). When the log interval (in days) is reached, the logging switches between the two logging tables in the database (for example, A and B). Logs first go into A. When the log interval is reached the first time, the logs are written to B. When the log interval is reached again, the logs go back to A. A is emptied in preparation to store the new log records. If you set your log interval to 14 (the default setting), the logs will switch every 14 days, thus preserving for you, at any point in time, records dated between 14 and 28 days old.

8.10.1 Using Event Logging

In general, you can set up event logging as follows:

1. Add the event object, with an appropriate domain and subdomain combination, using wwlog_api_admin.add_log_event. Adding the event ensures that lists of values and other user interface components invoked when the user is monitoring the events show this new event in their lists.

2. Register the log event record by using wwlog_api_admin.add_log_registry. The log registry record represents the events you want to log in the future and provides a means to filter the events that need to be logged.

3. Use start_log and stop_log to mark the events you want to log in your code. Alternatively, for entering single step event log information, just call the log method to mark that event.

Guidelines for Event Logging

While implementing event logging, keep in mind the following:

- Log only what you really care about to improve performance. You don't want to flood the system with log messages that are irrelevant to you. If events are logged in Show mode, then multiple instances of these portlets mean additional hits to the database.

- Choose your domain, subdomain, and log events carefully. While using the log APIs, do not use the Oracle Portal domains such as WWC, WWV, or WWS for your log messages. Organize your domains and subdomains hierarchically ensuring that they are unique across portlets. If other portlets happen to use the same domains or subdomains, you will see those log messages interspersed with your own.

- Create log events that show up in the pop-up lists of values monitoring the logs. You can simply create log registry records that filter the events that would actually be logged, either by specifying particular events or using the generic filters with wild cards (%). Apart from creating log registry records, we recommend that you create log events for events that you want to monitor. This way the lists of values in the user interface show these records for additional functions such as monitoring.

- Provide required privileges to users or user groups who need to monitor the logs. Any logs created by a user can be viewed by that user, the Portal Administrator, and any user with the Edit privilege on the ANY_LOGS object type.

8.10.2 Adding Event Logging

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement event logging. You can browse through this example as follows to see how the event logging functions are implemented in a portlet:

1. Open the services_portlet.pkb file in an editor.
The domain and subdomain definitions for your log messages are provided with aliases in the constants part of your portlet definition.

DOMAIN           constant varchar2(30) := 'provider';
SUBDOMAIN        constant varchar2(32) := 'services';
PORTLET_PATH     constant varchar2(256):= 'oracle.portal.pdk.servicesportlet';
PREFNAME_STRING  constant varchar2(30) := 'services_string';
PREFNAME_TITLE   constant varchar2(30) := 'services_title';

2. Find the save_prefs procedure. This procedure provides personalizable functionality where you can personalize text and the portlet title in Edit mode. save_prefs stores these personalizations in the database. While saving the changes, you should also log them. Hence, this procedure provides an ideal example of implementing the logging service. A single step event is logged using wwlog_api.log. The first instance of wwlog_api.log logs the event of personalizing text. The second instance logs the event of personalizing the portlet title.

procedure save_prefs
...
begin
...
if (l_prefs.string_id is null or to_number(l_prefs.string_id) = 0)
then
l_action := LOG_INSERT;
...
else  -- string exists in at least one language so update it
l_action := LOG_UPDATE;
...
end if;
-- Log this transaction
l_information := l_user||'%'||l_time||'%completed%'||p_string;
wwlog_api.log (p_domain      => DOMAIN,
p_subdomain   => SUBDOMAIN,
p_name        => l_user,
p_action      => l_action,
p_information => l_information,
p_url         => l_url,
p_row_count   => l_row_count,
p_elapsed_time=> l_elapsed_time);
...
if (l_prefs.title_id is null or to_number(l_prefs.title_id) = 0)
then
l_action := LOG_INSERT;
...
else
l_action := LOG_UPDATE;
...
-- Log this transaction       l_information := l_user||'%'||l_time||'%completed%'||p_title;
wwlog_api.log (p_domain      => DOMAIN,
p_subdomain   => SUBDOMAIN,
p_name        => l_user,
p_action      => l_action,
p_information => l_information,
p_url         => l_url,
p_row_count   => l_row_count,
p_elapsed_time=> l_elapsed_time);
...
end save_prefs;

3. The save_prefs procedure also logs an event with wwlog_api.log when an exception occurs.

exception
when INVALID_TEXT_EXCEPTION then
l_information := l_user||'%'||l_time
||'%INVALID_TEXT_EXCEPTION%'||p_string;
l_action      := LOG_FAILED;
wwlog_api.log (p_domain      => DOMAIN,
p_subdomain   => SUBDOMAIN,
p_name        => l_user,
p_action      => l_action,
p_information => l_information,
p_url         => l_url,
p_row_count   => 0,
p_elapsed_time=> l_elapsed_time);
...

4. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

5. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.11 Writing Multilingual Portlets

Oracle Portal has a robust set of APIs for interacting with Oracle Portal multilingual storage facility. This storage facility provides a mechanism for storing and retrieving strings in different languages. These APIs abstract the native multilingual functionality and provide developers with a powerful storage mechanism for developing providers that support different language environments.

Multilingual services are available through the wwnls_api package. These services include the following key features:

- The multilingual APIs enable the provider to load several translations for the strings displayed in their portlets. Once the strings have been loaded, the provider can call the APIs to retrieve the strings from the multilingual table as needed.

- Context APIs retrieve the user's language and the appropriate translation for that language. The Context APIs determine the user's language environment from the language setting in the browser. When a requested translation does not exist, the APIs return the base language translation.

For example, assume that the provider's register procedure loads US and French translations for the portlet title. When the portlet is rendered, the provider implementation retrieves the portlet title string from the table and displays the following results:

- A request for a French string causes the portlet title to appear in French.

- A request for a US string causes the portlet title to appear in US English.

- A request for a Chinese string causes the portlet title to appear in US English because we did not load a translation for the Chinese language.

8.11.1 Using Multilingual Support

In general, you can set up multilingual support as follows:

1. Load your string definitions into the database using the string equivalents for each language you intend to use. For this purpose, call the wwnls_api.add_string or wwnls_api.set_string with an appropriate domain, subdomain, error message name, and error text combination.

2. Retrieve the strings you require with wwnls_api.get_string for the language that you desire.

8.11.2 Adding Multilingual Support

To add multilingual support, you need to perform the following tasks:

- Section 8.11.2.1, "Loading Language Strings"

- Section 8.11.2.2, "Retrieving Language Strings"

8.11.2.1 Loading Language Strings

Language strings can be loaded by a script that is part of the provider installation. This script calls add_string and set_string to create equivalent strings for different languages.

Oracle Portal uniquely identifies language strings using a combination of domain, subdomain, and name. The domain and subdomain provide a way to categorize the strings. The domain and subdomain should be unique enough to reasonably preclude conflicts with other users of the APIs.

- A domain is a particular area of the product. An example of a domain could be provider or page group.

- A subdomain is a subsystem of the domain. For example, the subdomain could be the provider name (for example, HelloProvider) or subpage name (for example, HelloPage).

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement multilingual support. You can browse through this example as follows to see how to load strings for multilingual support:

1. Open the services_seed.sql file in an editor.

2. Notice the add_string call with the parameters for domain name, subdomain name, string name, language, and the actual string text. It returns the String ID for the language string. For setting equivalent strings in other languages, set_string is called with the same parameters.

set serveroutput on size 1000000
set define off

declare
l_string_id  integer;
l_person_id  integer;
l_group_id   integer;
begin
...
-- strings for portlet record fields
l_string_id := wwnls_api.add_string(
'provider','services','ptldefname','us','DatabaseServicesPortlet');
wwnls_api.set_string(
'provider','services','ptldefname','d','DatenbankServicesPortlet-d');
l_string_id := wwnls_api.add_string(
'provider','services','ptldeftitle','us','Database Services Portlet');
wwnls_api.set_string(
'provider','services','ptldeftitle','d','Datenbank Services Portlet - d');
l_string_id := wwnls_api.add_string(
'provider','services','ptldefdesc','us','This is the database services
portlet implemented in PL/SQL. It displays 6 show modes.');
wwnls_api.set_string(
'provider','services','ptldefdesc','d','Dies ist das Datenbank Service
Portlet, erstellt in PL/SQL. Es stellt 6 Anzeigemodi dar. - d');
l_string_id := wwnls_api.add_string(
'provider','services','ptldevtmmsg','us','Web Services Portlet Timed
Out.');
wwnls_api.set_string(
'provider','services','ptldevtmmsg','d','Zeitüeberschreitung aufgetreten
in Web Services Portlet. -d');

8.11.2.2 Retrieving Language Strings

The services example, located in ..\pdkplsql\pdk\plsql\svcex in PDK-PL/SQL (pdkplsql.zip), illustrates how you can implement multilingual support. You can browse through this example as follows to see how to retrieve strings for multilingual support:

1. Open the services_portlet.pkb file in an editor.

2. The domain and subdomain definitions for your language strings are provided with aliases in the constants part of your portlet definition.

DOMAIN           constant varchar2(30) := 'provider';
SUBDOMAIN        constant varchar2(32) := 'services';
PORTLET_PATH     constant varchar2(256):= 'oracle.portal.pdk.servicesportlet';
PREFNAME_STRING  constant varchar2(30) := 'services_string';
PREFNAME_TITLE   constant varchar2(30) := 'services_title';

3. Find the get_portlet_info function. Notice the calls to wwnls_api.get_string to populate the portlet title, name, and description.

function get_portlet_info
(
p_provider_id in integer
,p_language in varchar2
)
return wwpro_api_provider.portlet_record
is
l_portlet  wwpro_api_provider.portlet_record;
begin
l_portlet.id := services_provider.SERVICES_PORTLET_ID;
l_portlet.provider_id := p_provider_id;
l_portlet.language := p_language;
l_portlet.title :=
wwnls_api.get_string(
p_domain       =>  DOMAIN
,p_sub_domain   =>  SUBDOMAIN
,p_name         =>  'ptldeftitle'
,p_language     =>  p_language
);
l_portlet.description :=
wwnls_api.get_string(
p_domain       =>  DOMAIN
,p_sub_domain   =>  SUBDOMAIN
,p_name         =>  'ptldefdesc'
,p_language     =>  p_language
);
l_portlet.name :=
wwnls_api.get_string(
p_domain       =>  DOMAIN
,p_sub_domain   =>  SUBDOMAIN
,p_name         =>  'ptldefname'
,p_language     =>  p_language
);
...

4. Browse the rest of the file to examine other usage examples of wwnls_api.get_string, which is used in several other places in services_portlet.pkb.

5. Optionally, if you want to see this portlet on a page and it is not already in the Portlet Repository, refer to the instructions in Section 8.3.2, "Implementing the Provider Package" for information on how to add it.

6. Once your portlet appears in the repository, you can add it to a page to test it. To add your portlet to a page, follow the instructions in Oracle Fusion Middleware User's Guide for Oracle Portal.

8.12 Enhancing Portlets for Mobile Devices

This section explains how to go about enhancing a portlet with PDK-PL/SQL for a mobile device. Before proceeding with this section, you should familiarize yourself with the guidelines for building mobile-enabled portlets, Section 8.1.3, "Guidelines for Mobile Portlets", and the methods of building portlets with PDK-PL/SQL, Section 8.2, "Building PL/SQL Portlets with the PL/SQL Generator" and Section 8.3, "Building PL/SQL Portlets Manually".

To properly build a portlet for a mobile device, do the following:

1. Set the portlet record attributes to support mobile output. Requests arriving from mobile devices through the mobile gateway need to be answered with OracleAS Wireless XML using the text/vnd.oracle.mobilexml content type in the header. A mobile-enabled portlet must specify that it can handle these types of requests and produce the mobile content accordingly.
Table 8-6 lists the portlet record attributes pertinent to mobile portlets and explains how you should specify them.

Table 8-6 Portlet Record Attributes

Attribute

Description

accept_content_type

Specify a comma-delimited list of the content types that the portlet produces. If the portlet can produce both HTML and OracleAS Wireless XML, the string would be:

text/html, text/vnd.oracle.mobilexml

If the portlet can produce only OracleAS Wireless XML, the string would be:

text/vnd.oracle.mobilexml

mobile_only

Indicate whether the portlet is available only to mobile pages. TRUE declares the portlet as mobile only, and it will not appear in the Add Portlets page for a standard page. FALSE declares the portlet as mobile and standard, and it will appear in the Add Portlets page for both standard and mobile pages. If the portlet only produces OracleAS Wireless XML and you set this flag to FALSE, the OracleAS Wireless XML is automatically transformed into HTML for desktop devices (such as a normal PC Web browser). This functionality enables you to develop portlets that output only OracleAS Wireless XML but can be viewed on standard pages for desktop access as well as for mobile access.

short_title

Enter a shorter version of the portlet title. This title is used on mobile devices because it is more likely to fit the smaller screen. If you do not set a short title, then the portlet title is used instead.

has_show_link_mode

Indicate whether you have implemented Link mode for the portlet. We recommend that all mobile portlets enable Link mode. The rationale for using Link mode is more fully explained when you reach step 3.

2. If the portlet can produce both HTML and OracleAS Wireless XML, then, during execution, it must determine whether the request is for a mobile or a desktop device. If it is a desktop request, then the portlet must product HTML output. If it is a mobile request, then it must produce OracleAS Wireless XML output. You can determine the request type with the wwctx_api.get_http_accept(). It fetches the HTTP accept header, which indicates the request type. In the portlet response, you must set the MIME header to the appropriate value in the HTTP header before the portlet content is produced. If not, then the portlet response is rejected when the resulting page is built by Oracle Portal. If the call to get wwctx_api.get_http_accept() returns a string starting with text/vnd.oracle.mobilexml, then you can assume it is a mobile request. Otherwise, it is a desktop request. In the case of a mobile request, you should set the MIME header to text/vnd.oracle.mobilexml. In the case of a desktop request, you can explicitly set the MIME header to text/html, but it is not required that you do so because it's the default setting.
If you want to produce HTML for desktop requests and OracleAS Wireless XML for mobile requests, the show procedure for your portlet should look similar to the following:

procedure show
(
p_portlet_record in out wwpro_api_provider.portlet_runtime_record
)
is
begin
--
-- Does the portal want us to render the portlet contents?
--
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
--
-- Is this a mobile request?
--
if owa_util.get_cgi_env('HTTP_ACCEPT') like
wwpro_login.CONTENT_TYPE_MOBILEXML || '%' then
--
-- This is a mobile request for the portlet contents
-- call the mobile show contents procedure
--
render_mobile_show_contents(p_portlet_record);
else
--
-- This is a desktop request for the portlet contents,
-- call the desktop show contents procedure
--
render_desktop_show_contents(p_portlet_record);
end if;
elsif -- check for other show modes, and handle them
...
end show;

If you want to produce only OracleAS Wireless XML for all requests, the show procedure for your portlet should look similar to the following:

procedure show
(
p_portlet_record in out wwpro_api_provider.portlet_runtime_record
)
is
begin
--
-- Does the portal want us to render the portlet contents?
--
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
--
-- This is either a desktop or mobile request for the portlet
-- contents call the show contents procedure to render the
-- OracleAS Wireless XML output
--
render_show_contents(p_portlet_record);
elsif -- check for other modes
...
end show;

In order to generate OracleAS Wireless XML, the render_show_contents or render_show_mobile_contents procedure would need to contain something similar to the following:

...
(
p_portlet_record in out wwpro_api_provider.portlet_runtime_record
)
is
begin
--
-- Set the MIME type to be Oracle9iAS Wireless XML
--
owa_util.mime_header('text/vnd.oracle.mobilexml');
--
-- Output the Oracle9iAS Wireless XML markup
--
htp.p('<SimpleText><SimpleTextItem>');
htp.p('Hello World!');
htp.p('</SimpleTextItem></SimpleText>');
...

Note:

As this is a mobile request the MIME header is set to text/vnd.oracle.mobilexml. In the OracleAS Wireless XML markup, you only need to render the actual content. Oracle Portal fits it into the complete OracleAS Wireless XML document. You do not need <SimpleResult> or <SimpleContainer> tags. These tags are rendered by Oracle Portal along with a back link, which, by default, is assigned to one of the buttons on the mobile device.

3. If you want your portlet to allow personalization of titles for mobile rendering, you need to implement Link mode. Link mode is only called for mobile requests and it renders a link to the portlet content. This link appears in the menu of page contents when the user first navigates to the page. If a Link mode is not present for a portlet, then Oracle Portal renders a default link mode using the short title from the portlet record. You can also use Link mode to render more than just a title. For example, in a stock portlet, you could render the stock price of a user's favorite stock. Thus, they could see the current stock price without drilling down further.

The link for Link mode rendition is provided by Oracle Portal and passed to the portlet through the page_url parameter on the portlet record. The portlet can extend or completely replace this behavior. If this link is rewritten as a URL that takes the user away from Oracle Portal (it does not point to the Oracle Portal middle tier server), then the portlet should set the show_behaviour_style field to wwpro_api_provider.EXTERNAL_PORTLET on the portlet record.

The following example illustrates how to code your show procedure to include Link mode:

procedure show
(
p_portlet_record in out wwpro_api_provider.portlet_runtime_record
)
is
begin
--
-- Does the portal want us to render the portlet contents?
--
if (p_portlet_record.exec_mode = wwpro_api_provider.MODE_SHOW) then
--
-- Is this a mobile request?
--
if owa_util.get_cgi_env('HTTP_ACCEPT') like
wwpro_login.CONTENT_TYPE_MOBILEXML || '%' then
--
-- This is a mobile request for the portlet contents,
-- call the mobile show contents procedure
--
render_mobile_show_contents(p_portlet_record);
else
--
-- This is a desktop request for the portlet contents,
-- call the desktop show contents procedure
--
render_desktop_show_contents(p_portlet_record);
end if;
--
-- Does the portal want us to render the LINK mode?
--
elsif (p_portlet_record.exec_mode = wwpro_api_provider.MODE_LINK) then
--
-- This is a mobile request for the portlet link mode,
-- call the mobile link procedure
--
render_mobile_link(p_portlet_record);
elsif -- check for other show modes, and handle them
...
end show;

The following example illustrates what you must implement in the render_mobile_link procedure for Link mode. In particular, notice the setting of the MIME type, the usage of get_custom_short_title, and the OracleAS Wireless XML output.

procedure render_mobile_link
(
p_portlet_record in out wwpro_api_provider.portlet_runtime_record
)
is
l_short_title varchar2(80);
begin
--
-- Set the MIME type to be Oracle9iAS Wireless XML
--
owa_util.mime_header('text/vnd.oracle.mobilexml');
--
-- Get the personalized short title for this portlet instance
-- using the language and reference path held in the portlet
-- record
--
l_short_title := get_custom_short_title(p_portlet_record);
--
-- Output the OracleAS Wireless XML markup
--
if l_short_title is not null then
htp.p('<SimpleHref target="'
|| htf.escape_sc(p_portlet_record.page_url)
|| '">'
|| l_short_title
|| '</SimpleHref>');
else
htp.p('<SimpleHref target="'
|| htf.escape_sc(p_portlet_record.page_url)
|| '">'
|| get_custom_title(p_portlet_record)
|| '</SimpleHref>');
end if;
end render_mobile_link;

Accessing the DeviceClass Header

To further facilitate the creation of mobile-enabled portlets, you can access information in the DeviceClass header, which is sent to all portlets through owa_util.get_cgi_env('x-oracle-device.class'). You can use the values of this header to determine the complexity of the OracleAS Wireless XML rendition of the portlet. For example, the PDA rendition could contain considerably richer content than the microbrowser rendition. The voice rendition could contain extra tags for voice commands and links to sound files, which play instead of the text-to-speech system.

Table 8-7 describes the values available in the header.

Table 8-7 DeviceClass Header Values

Value

Description

voice

Indicates a voice-only device, such as a normal telephone calling a voice access number.

microbrowser

Indicates a small size display device, which supports a markup browser, such as a WAP phone.

pdabrowser

Indicates a medium size display device, such as a Palm or PocketPC.

pcbrowser

Indicates a large size display device used with desktop browsers

8.13 Registering Providers Programmatically

In most cases, you use the Oracle Portal user interface to register providers as described in Section 8.2.3.2, "Registering the Database Provider". In some instances, though, you may wish to register a provider programmatically rather than through the user interface. This section describes as follows how to use wwpro_api_provider_registry.register_provider to register your providers:

- Section 8.13.1, "Registration Prerequisites"

- Section 8.13.2, "Provider Record Input"

- Section 8.13.3, "Registration Example"

8.13.1 Registration Prerequisites

In order to register a provider programmatically with wwpro_api_provider_registry.register_provider, the following requirements must be met:

- You must first install the provider as described in Section 8.2.3.1, "Installing the Packages in the Database".

- You must have the necessary privileges to execute wwpro_api_provider_registry.register_provider. As it is a secure API, a security check determines whether the user calling it has the necessary privileges. At a minimum, you must have wwsec_api.ANYPROVIDER_PUBLISH. If you have the privileges to execute the API, you also have sufficient privileges to set the Oracle Portal session using wwctx_api.set_context.

Note:

If the database user of the SQL*Plus session is the Oracle Portal schema owner, then, by default, the user is the Oracle Portal schema owner (unless wwctx_api.set_context is called with a different user). The schema owner already has the necessary privileges to execute wwpro_api_provider_registry.register_provider.

8.13.2 Provider Record Input

The wwpro_api_provider_registry.register_provider API requires the provider_record as input. When you pass the provider_record to register_provider, all of the fields are not required. Table 8-8 indicates which fields are required for Web and database providers. If a field is not applicable for a particular type of provider, it is shown as NA.

Table 8-8 Required provider_record Fields

Field

Required for database providers

Required for Web providers

Comments

name

Yes

Yes

None

implementation_style

Yes

Yes

This field is always the following for PL/SQL portlets:

wwpro_api_provider_registry.
DATABASE_IMPL;

implementation_owner

NA

Yes

This field is the schema where the provider/portlet is located.

implementation_name

NA

Yes

When registering a database provider the implementation package of the provider must be valid for the registration to be successful.

login_frequency

Yes

Yes

This field specifies how often to grab the session information.

http_app_type

Yes

NA

For external application Web providers:

wwpro_api_provider_registry.HTTP_APP_TYPE_EXTERNAL

For regular Web providers:

wwpro_api_provider_registry.HTTP_APP_TYPE_PORTAL

http_url

Yes

NA

None

require_url

Yes

NA

None

encryption_key

If provider_key is not null,yes.

If provider_key is null, no.

If provider_key is not null,yes.

If provider_key is null, no.

None

8.13.3 Registration Example

The following sample SQL script illustrates the usage of wwpro_api_provider_registry.register_provider.

set serveroutput on size 1000000
set define on
declare
l_prov_rec     wwpro_api_provider_registry.provider_record;
l_prov_id      integer;
begin
l_prov_rec.name                 := 'CacheProvider';
l_prov_rec.display_name         := 'Cache Provider';
l_prov_rec.timeout              := 10;
l_prov_rec.timeout_msg          := 'The provider timed out';
l_prov_rec.implementation_style := wwpro_api_provider_registry.DATABASE_IMPL;
l_prov_rec.implementation_owner := '&&2';
l_prov_rec.implementation_name  := 'cache_provider';
l_prov_rec.language             := wwctx_api.get_nls_language;
l_prov_rec.enable_distribution  := true;
l_prov_rec.login_frequency      := wwpro_api_provider_registry.LOGIN_
FREQUENCY_NEVER;
l_prov_rec.created_on           := sysdate;
l_prov_rec.created_by           := '&&1';
l_prov_rec.last_updated_on      := sysdate;
l_prov_rec.last_updated_by      := '&&1';
l_prov_id := wwpro_api_provider_registry.register_provider(l_prov_rec);
commit;
dbms_output.put_line('Cache Provider successfully registered');
exception
when others then
dbms_output.put_line('ERROR: Could not register Cache Provider');
dbms_output.put_line('SQLERRM: ' || SQLERRM);
rollback;
end;
/

Note:

After you have registered your provider, you may also refresh the Portlet Repository programmatically using wwpro_api_provider_registry.refresh_portlet_repository or through the Oracle Portal user interface.

Part III

Content Management APIs

Part III contains the following chapters:

- Chapter 9, "Content Management API Introduction"

- Chapter 10, "Getting Started with Content Management APIs"

- Chapter 11, "Performing Simple Content Management Tasks"

- Chapter 12, "Extending Your Portal"

- Chapter 13, "Searching Portal Content"

- Chapter 14, "Creating Multi-Lingual Content"

- Chapter 15, "Implementing Content Security"

- Chapter 16, "Using the Content Management Event Framework"

9 Content Management API Introduction

This chapter provides an overview of a selection of the APIs provided with Oracle Portal. You can use these particular APIs to write code for performing content management tasks. It contains the following sections:

- Section 9.1, "Overview"

- Section 9.2, "Content Management APIs"

- Section 9.3, "Providing Access to the APIs and Secure Views"

- Section 9.4, "Guidelines for Using the APIs"

- Section 9.5, "Guidelines for Using the Secure Views"

- Section 9.6, "Code Samples"

9.1 Overview

Oracle Portal uses a schema within the Oracle Metadata Repository, shown in Figure 9-1, to store the content and metadata associated with the portal instance. This schema is sometimes referred to as the content repository. For example, when a contributor adds a file item to a portal page, the file is uploaded to a table in the portal schema of the MDS Repository along with the metadata supplied.

Figure 9-1 The MDS Repository

For more information about the MDS Repository and Oracle Portal architecture in general, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Oracle Portal provides many built-in tools to help you manage the content in the portal schema of the MDS Repository right from your Web browser. However, sometimes you may find that you need to work with your content in an environment outside of the Oracle Portal browser-based user interface.

The following are some examples of when you might want to do this:

- Building an alternative user interface when the product user interface does not quite meet your requirements, for instance:

- to change the look and feel of the wizards to meet your own corporate design

- to add custom validations

- to provide a custom search form or search results page

- Bulk loading content with metadata

- Integrating with external applications and content management systems

- Archiving items (for example, moving them to an archive page or offline storage)

- Managing versions (for example, deleting or purging noncurrent versions, limiting the number of versions, and so on)

- Integrating with external workflow systems

The content management APIs enable you to interact with the portal schema of the MDS Repository programmatically, rather than by using the Oracle Portal user interface. For more information, refer to Section 9.2, "Content Management APIs".

You can also query the data in the content repository using a set of secure views. For more information, refer to Section 9.2.1, "Secure Content Repository Views".

9.2 Content Management APIs

There are multiple public APIs that enable you to programmatically perform many content management tasks, such as adding items and creating pages.

The majority of the APIs for content management are contained within the WWSBR_API package. You may also find the following API packages useful when writing code to perform content management tasks:

- The WWSRC_API package contains APIs for performing searches on content in the portal schema of the MDS Repository.

- The WWSEC_API package contains APIs for controlling access to content in the portal schema of the MDS Repository.

- The WWCTX_API package contains APIs for managing a session context for a specific user.

- The WWPRO_API_INVALIDATION package contains APIs for invalidating content in Oracle Web Cache.

Note:

Only use public APIs in your code. The use of non-public APIs is not supported and may cause your code to break when upgrading to new releases.

For more information about these packages, refer to Section F.1, "Supported APIs". For a full list of the supported PL/SQL APIs, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

9.2.1 Secure Content Repository Views

Held within the portal schema are a number of content repository views. You can use these views to query back data on the documents and items stored in the content repository. For a list of the secure views, refer to Section F.2, "Secure Views".

Many of the content management APIs that are discussed in this manual require you to pass object IDs as parameters. To do this, you need to know the IDs of the objects with which you want to work. You can use the secure content repository views to find the IDs of portal objects. For more information, refer to Section 10.3, "Finding an Object ID".

Note:

Direct access to other tables and views in the portal schema of the MDS Repository is not supported, as the definition of those tables and views may change between releases.

9.2.2 Terminology

To maintain backward compatibility with the Oracle9iAS Portal Release 1 (3.0.9) content area APIs and views, many of the API procedure and parameter names and the view and column names continue to use Release 1 terminology. You may find Table 9-1 useful to map the Release 1 terminology to the current terminology.

Table 9-1 Mapping of Release 1 Terminology to Current Terminology

Release 1 Terminology

Current Terminology

content area

page group

folder

page

navigation bar

navigation page

9.3 Providing Access to the APIs and Secure Views

The portal schema automatically has the appropriate access to the public APIs and secure views. To enable another schema to access the public APIs and secure views, use the following script:

ORACLE_HOME/portal/admin/plsql/wwc/provsyns.sql

To provide access to the APIs, perform the following steps:

1. Change to the directory containing the provsyns.sql script:

Windows: cd <ORACLE_HOME>\portal\admin\plsql\wwc
Linux/Unix: cd <ORACLE_HOME>/portal/admin/plsql/wwc

2. Log in to SQL*Plus as the portal schema owner. For example:

sqlplus portal/oracle1

You must run provsyns.sql as the portal schema owner. By default the portal schema is called PORTAL. An administrator can use Oracle Internet Directory to obtain the portal schema password as follows:

1. Navigate to:

- Entry Management

- cn=OracleContext

- cn=Products

- cn=IAS

- cn=Infrastructure Databases

- OrclReferenceName=Infrastructure Database (for example, iasdb.server.domain.com)

- OrclResourceName=Schema Name (for example, PORTAL)

2. Click this entry.

3. Look for the orclpasswordattribute value in the right panel. This is the schema password.

3. Run the provsyns.sql script:

SQL>@provsyns.sql <schema>

Where schema is the name of the schema to which you want to grant access.

Tip:

Ignore any messages related to a missing file when running provsyns.sql.

9.4 Guidelines for Using the APIs

When using the APIs described in this manual, you should follow the best practice guidelines described in the following sections.

9.4.1 Using a Separate Schema

When creating procedures and packages that use the content management APIs, create them in a separate schema of the database in which Oracle Portal is installed. Do not create them in the portal schema. Creating additional procedures and packages in the portal schema is not supported and they may be lost when upgrading to a new release.

Once you have created the schema for your procedures and packages, you must grant it access to the APIs and secure content repository views. For information about how to do this, refer to Section 9.3, "Providing Access to the APIs and Secure Views".

9.4.2 Using Constants

All the API packages include predefined constants that you can use to easily refer to Oracle Portal objects and metadata. For example, the WWSBR_API package includes constants for base attributes (such as ATTRIBUTE_AUTHOR and ATTRIBUTE_TEXT), seeded item types (such as ITEM_TYPE_FILE and ITEM_TYPE_URL), and image alignment options (such as ALIGN_BOTTOM and ALIGN RIGHT). To make your code robust, you should use these constants wherever possible for object IDs and attribute values. That way, if the actual ID or values change, your code will still work because the name of the constant will stay the same.

For a full list of the constants available in each API package, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

9.4.3 Invalidating the Cache

Many of the APIs automatically generate cache invalidation messages for the pages that are affected by the changes. Therefore, you should always call wwpro_api_invalidation.execute_cache_invalidation at the end of your routine to process these messages (see Example 11-3 for an example of how to do this). If you do not call this procedure, your changes may not be visible until the affected pages are invalidated through other means.

There is no need to call execute_cache_invalidation more than once. For example, if you are adding or updating multiple items in a loop, call execute_cache_invalidation when the loop is complete.

9.4.4 Issuing Commits

The APIs do not issue commits. However, if you are calling the APIs from a browser session through Portal Services, Portal Services will perform an automatic commit before returning control to the browser.

The wwpro_api_invalidation.execute_cache_invalidation API also issues a commit. If you are calling the APIs from an external environment (for example, SQL*Plus or a Web provider), and you need to commit before processing the cache invalidations, you must explicitly issue a commit statement in your code. Similarly, if you need to rollback, do so before calling execute_cache_invalidation.

9.4.5 Resetting CMEF Global Variables

If you are using the content management APIs in conjunction with the Content Management Event Framework (CMEF) you need to make sure that you reset the CMEF global variables before or after each API call.

When a user performs an action using the user interface, Oracle Portal uses various global variables to determine which CMEF messages get logged. After each action, these global variables are automatically reset ready for the next action. When you use the APIs to perform portal actions, these global variables are not automatically reset. Therefore, to ensure that CMEF messages are logged correctly, you must reset the CMEF variables explicitly by calling the wwsbr_api.clear_cmef_context API before or after each API call.

For example, if you use the APIs to create several items on a page, you need to call the clear_cmef_context API between each of the add_item calls (see Example 9-1).

Example 9-1 Calling the clear_cmef_context API

...
l_new_item_master_id1 := wwsbr_api.add_item(
p_caid              => l_caid,
p_folder_id         => l_folder_id,
...
);
wwsbr_api.clear_cmef_context;
l_new_item_master_id2 := wwsbr_api.add_item(
p_caid              => l_caid,
p_folder_id         => l_folder_id,
...
);
wwsbr_api.clear_cmef_context;
...

For more information about CMEF, refer to Chapter 16, "Using the Content Management Event Framework".

9.4.6 Using Predefined Exceptions

The API packages contain many predefined exceptions. When coding with the content management APIs, it is good practice to include the appropriate predefined exceptions rather than relying on the WHEN OTHERS exception to pick up all errors. This also has the advantage that any error messages generated by the code can be more specific to the actual problem. Example 9-2 shows some of the exceptions you might include when calling the wwsbr_api.set_attribute API.

Example 9-2 Using Predefined Exceptions

begin
wwsbr_api.set_attribute(
p_site_id           => 37,
p_thing_id          => 8056,
p_attribute_site_id => wwsbr_api.SHARED_OBJECTS,
p_attribute_id      => wwsbr_api.ATTRIBUTE_TITLE,
p_attribute_value   => 'New Display Name'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
when wwsbr_api.ITEM_NOT_FOUND_ERROR then
dbms_output.put_line('Item does not exist');
when wwsbr_api.ATTRIBUTE_NOT_FOUND then
dbms_output.put_line('Attribute does not exist');
when wwsbr_api.ITEM_NOT_FOR_UPDATE then
dbms_output.put_line('Cannot update an item with a status of Rejected, Deleted or Marked for Delete');
when wwsbr_api.NOT_AUTHORIZED_USER then
dbms_output.put_line('User trying to update the item is not the current user or the user who checked the item out');
when wwsbr_api.EDIT_CUSTOM_ATTR then
dbms_output.put_line('Error while trying to update a custom attribute');
when OTHERS then
dbms_output.put_line('Error '||to_char(sqlcode)||': '||sqlerrm);
end;
/

Tip:

When using predefined exceptions, remember to include the name of the package that owns it, for example wwsbr_api.PAGE_NOT_FOUND.

For a full list of the exceptions available in each API package, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

9.4.7 Naming Objects

When creating page groups and page group objects, you specify a unique internal name for the object (p_name). Internal names must:

- be no more than 60 characters in length.

- not contain spaces or special characters other than the underscore character (_).

9.5 Guidelines for Using the Secure Views

When using the secure views described in this manual, you should follow the best practice guidelines described in the following sections.

Note:

In this release, there is no supported view of the document table in the repository. A secure view of the document table is planned for a future release.

9.5.1 Identifying Primary Keys

The primary key for most objects contains the object id, the page group id (caid), and the language. When joining between views, always use these columns in the JOIN clause. Example 9-3 shows the JOIN when joining an item to its page.

Example 9-3 Joining an Item to Its Page

select ...
from wwsbr_all_items i,
wwsbr_all_folders p
where i.folder_id = p.id
and i.caid = p.caid
and i.language = p.language

9.5.2 Querying Translatable Objects

If an object is translatable (that is, it resides in a page group for which translations are enabled and it includes languages in its key), you must observe the following rules:

- If the object (or its current version) is translated, a row will exist for the translation. To select the row for the current session language, compare the value of the language column to the function wwctx_api.get_nls_language().

- If the object is not translated, select the row for the page group's default language.

Example 9-4 selects the translated page display name for all pages in a given page group.

Example 9-4 Selecting a Translated Page Display Name

select p.display_name title
from wwsbr_all_folders p
where p.caid = 53
and (p.language = wwctx_api.get_nls_language -- The current language.
or (exists -- A row for the page in the page group default language.
(select pg.id
from wwsbr_all_content_areas pg
where pg.id = p.caid
and pg.default_language = p.language
)
and not exists -- A row for the page in the current language.
(select p2.id
from wwsbr_all_folders p2
where p2.id = p.id
and p2.language = wwctx_api.get_nls_language
)
)
)
/

Tip:

When writing PL/SQL routines that refer to the current session language, call wwctx_api.get_nls_language once and store it in a variable. Referring to the variable in any following SQL statements, rather than calling the API multiple times, results in better performing code.

9.5.3 Selecting Data for the Current User

To select data for the current user, use the function wwctx_api.get_user. Example 9-5 selects items created by the current user.

Example 9-5 Selecting Items Created by the Current User

declare
l_user varchar2(60);
...
begin
...
l_user := wwctx_api.get_user;
select ...
from wwsbr_all_items
where creator = l_user
...
end;
/

9.6 Code Samples

The code samples provided in the next few chapters are intended to provide some examples of how you can use the content management and associated APIs. Not all of the APIs are used in these samples, and the samples provided do not utilize all the parameters, constants, exceptions, and so on available to the APIs.

For a full list of the public APIs available with Oracle Portal and their parameters, constants, exceptions and so on, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

The examples are written to be run from SQL*Plus. If running from other environments, for example Portal Services, you may need to make changes to the code given the context in which it is executing.

The examples, with the exception of Chapter 14, "Creating Multi-Lingual Content", which deals with translations, assume that the language context is set to the default language of the page group being manipulated. This simplifies the WHERE clause on any SQL statements. Objects always have a translation in the default language therefore the queries will return a single row as appropriate.

If this assumption on the language code does not hold true for your code, refer back to Section 9.5.2, "Querying Translatable Objects" for an example of how to extend the WHERE clause to deal with multiple translations or the non-existence of a translation in the given language context.

10 Getting Started with Content Management APIs

This chapter introduces some tasks and concepts that you may find useful before you start using the content management APIs provided with Oracle Portal. It contains the following sections:

- Section 10.1, "Setting the Session Context"

- Section 10.2, "API Parameters"

- Section 10.3, "Finding an Object ID"

10.1 Setting the Session Context

All of the content management APIs and the secure views assume that the context has been set for the functions to execute as a specific portal user. If you call an API from within a browser session (for example, a database provider or PL/SQL item), the context is set automatically to the user who is currently logged in to the portal. If you call an API from a Web provider or an external application (for example, SQL*Plus or Portal Services), you must set the context to a specific user by using the wwctx_api.set_context API.

This API allows an application to assert an identity, by providing a user name and password that the portal can verify with the Oracle Application Server Single Sign-On Server before establishing a session for the asserted user. If the assertion fails, due to an invalid password, for example, an exception is raised.

Example 10-1 sets the context to user JOE.BLOGS with the password welcome1.

Example 10-1 Setting the Session Context (set_context API)

declare
p_user_name varchar2(60) := 'JOE.BLOGGS';
p_password  varchar2(60) := 'welcome1';
p_company   varchar2(60) := null;
begin
wwctx_api.set_context(p_user_name,p_password,p_company);
end;
/

10.2 API Parameters

- The following parameters refer to the page group ID:

- p_site_id

- p_siteid

- p_caid

For backward compatibility purposes these parameter names have not been changed, and will not be changed, to use the most recent terminology. For more information, refer to Section 9.2.2, "Terminology".

- The following parameters refer to the page ID:

- p_folder_id

- p_id

For backward compatibility purposes these parameter names have not been changed, and will not be changed, to use the most recent terminology. For more information, refer to Section 9.2.2, "Terminology".

- An item has two IDs. All versions of the item have the same master item ID (GUID). However, when you create a new version of an item it is assigned its own ID that uniquely identifies that particular version of the item. Some APIs simply need the master item ID to identify an item (p_master_item_id). However, some APIs (for example, modify_item) also need to know which particular version of the item you want to work with. In this case you need to pass the unique item ID (p_item_id). In some APIs, you will find that the item ID is referred to as p_thing_id.

- The primary key for most objects contains the ID of the actual object and the ID of the page group to which the object belongs. When referencing an existing object in a parameter, you must reference both the object ID and its page group ID. The referenced object's page group must either be the same as the page group of the referencing object or the Shared Objects page group. For example, when adding an item, you need to specify the item type (for example, file, text, image, and so on). To do this you must pass the item type ID (p_type_id) and the ID of the page group which contains the item type (p_type_caid).

10.3 Finding an Object ID

Many of the content management APIs require you to pass object IDs to their parameters. To do this, you need to know the IDs of the objects with which you want to work. You can obtain these IDs by using the secured content repository views.

10.3.1 Finding a Page Group ID

Many of the content management APIs include the ID of a page group as one of the parameters. For example, when creating a page using the add_folder API, you need to specify the ID of the page group in which you want to create the page using the p_caid parameter. Example 10-2 shows a query that you could use to find out this ID.

Example 10-2 Finding the ID of a page group

select id "Page Group ID"
from wwsbr_all_content_areas
where name = '&pagegroup'
and language = '&language'
/

Example 10-3 shows how you might use this query in a function.

Example 10-3 Function to Find the ID of a Page Group

create or replace function get_page_group_id (p_name in varchar2) return number is
l_page_group number;
l_language   varchar2(30);
begin
l_language := wwctx_api.get_nls_language;
select id
into l_page_group
from wwsbr_all_content_areas
where name = p_name
and language = l_language;
return l_page_group;
exception
...
end;
/

10.3.2 Finding a Page ID

When working with pages and items using the content management APIs, you need to know the ID of the page in which you want to work. For example, if you want to delete a page using the delete_page API, you need to identify the page that you want to delete by its ID. Example 10-4 shows how to find out the ID of a page if you know the ID of the page group to which it belongs.

Example 10-4 Finding the ID of Page in a Known Page Group

select id "Page ID"
from wwsbr_all_folders
where name = '&page'
and caid = 53
and language = '&language'
/

Sometimes you may not know the ID of the page group to which a particular page belongs. Example 10-5 shows how to find out the ID of a page and its owning page group.

Example 10-5 Finding the IDs for a Page and Its Page Group Given Page and Page Group Names

column 'Page Group Name' format a25;
column 'Page Name' format a25;
select f.caid "Page Group ID",
c.name "Page Group Name",
f.id   "Page ID",
f.name "Page Name"
from wwsbr_all_content_areas c,
wwsbr_all_folders f
where f.name = '&page'
and c.id = f.caid
and c.name = '&pagegroup'
and c.language = '&language'
and c.language = f.language
/

10.3.3 Finding Region IDs

When adding an item to a page using the add_item API, you need to know the ID of the region in which you want to place the item. You can add items only to item regions that have been set up to allow content to be added to them. Example 10-6 shows a query that finds out the IDs and types of the insertable regions on a particular page. Given this information, you can choose the region ID of an appropriate region on the page in which to place your new item.

Example 10-6 Finding the IDs and Types of Insertable Regions on a Given Page

select distinct r.id "Region ID",
r.type "Type"
from wwsbr_all_content_areas c,
wwsbr_all_folders f,
wwsbr_all_folder_regions r
where f.name = '&page'
and c.name = '&pagegroup'
and c.id = f.caid
and f.id = r.folder.id
and f.caid = r.folder.caid
and r.allow_content = 1
and c.language = '&language'
and c.language = f.language
and (f.language = r.language
or r.language is null)
/

10.3.4 Finding an Item ID

Example 10-7 illustrates how to find the ID of an item by querying the WWSBR_ALL_ITEMS view.

Example 10-7 Finding the ID of the Current Version of an Item Given its Master Item ID

select id
from wwsbr_all_items
where masterid = 513
and caid = 53
and active = 1
and is_current_version = 1
and language = '&language'
/

To avoid duplicate rows when querying for currently published items, always include the LANGUAGE, ACTIVE (active=1), and IS_CURRENT_VERSION (is_current_version=1) columns. Example 10-8 shows how to select all items on a given page (folder_id=1) and a given page group (caid=75).

Example 10-8 Finding Item IDs

select i.display_name title, i.id latestversion
from wwsbr_all_items i
where i.folder_id = 1
and i.caid = 75
and i.active = 1
and i.is_current_version = 1
and (i.language = '&language' -- The current session language.
or (    exists -- A row for the item in the page group default language.
(select pg.id
from wwsbr_all_content_areas pg
where pg.id = i.caid
and pg.default_language = i.language
)
and not exists -- A row for the item in the current language.
(select i2.id
from wwsbr_all_items i2
where i2.id = i.id
and i2.language = '&language'
and i2.active = i.active
and i2.is_current_version = i.is_current_version
)
)
)
order by i.id
/

11 Performing Simple Content Management Tasks

This chapter describes how to use the APIs provided with Oracle Portal to perform simple content management tasks. It contains the following sections:

- Section 11.1, "Editing Page Properties"

- Section 11.2, "Editing Content"

- Section 11.3, "Reorganizing Content"

- Section 11.4, "Copying Content"

- Section 11.5, "Deleting Content"

For more information about any of the APIs mentioned in this chapter, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

Tip:

Remember, if you are calling the APIs from a Web provider or external application, you need to set the session context first. For more information, refer to Section 10.1, "Setting the Session Context".

11.1 Editing Page Properties

If you want to edit page properties, you need to perform the following steps:

1. Query the WWSBR_USER_PAGES view to populate a page record.

2. Modify the properties you want to update.

3. Pass the updated page record to the modify_folder API.

You can update the properties shown inTable 11-1 in the page record.

Table 11-1 Editable Page Record Properties

Property

Data Type

Description

NAME

VARCHAR2(60)

Name of the page. This name is used in path based URLs.

TITLE

VARCHAR(256)

Display name, or title, of the page.

SETTINGSSETID

NUMBER

ID of the style used by the page.

SETTINGSSETSITEID

NUMBER

Page group ID of the style used by the page.

ISPUBLIC

NUMBER(1)

Indicates that the page is viewable by public users. Valid values:

- 0 - not public

- 1 - is public

IMAGE

VARCHAR2(350)

Unique document name of the image associated with the page, for example 6001.JPG.

ROLLOVERIMAGE

VARCHAR2(350)

Unique document name of the rollover image associated with the page, or the inactive tab image for the tab, for example 6001.JPG.

TITLEIMAGE

VARCHAR2(350)

Unique document name of the active tab image for the tab, for example 6001.JPG.

LEADER

VARCHAR2(256)

E-mail address of the page contact.

DESCRIPTION

VARCHAR2(2000)

Description of the page.

CREATEDATE

DATE

Date the page was created.

CREATOR

VARCHAR2((256)

User name of the person who created the page.

HAVEITEMSECURITY

NUMBER(1)

Indicates that item level security is enabled for the page. Valid values:

- 0 - ILS disabled

- 1 - ILS enabled

ITEMVERSIONING

VARCHAR2(30)

Indicates the level of item versioning for the page. Valid values:

- versionnone - no versioning

- versionsimple - simple versioning

- versionaudit - audit versioning

TOPICID

NUMBER

ID of the category assigned to the page.

TOPIC_SITEID

NUMBER

Page group ID of the category assigned to the page.

VALUE

VARCHAR2(2000)

For PL/SQL pages, the PL/SQL code.

For JSP pages, the JSP source document name. Do not change this value for JSP pages.

IS_PORTLET

NUMBER(1)

Indicates if the page is published as a portlet. Valid values:

- 0 - not a portlet

- 1 - is a portlet

PLSQL_EXECUTOR

VARCHAR2(30)

For PL/SQL type pages, the database schema used to execute the PL/SQL code. Valid values:

- $PUBLIC$

- $CREATOR$

- <database user name>

KEYWORDS

VARCHAR2(2000)

Keywords for the page.

IS_READY

NUMBER(1)

Indicates that page creation is complete. Valid values:

- 1 - page creation is complete

INHERIT_PRIV

VARCHAR2(200)

The page from which this page inherits its privileges. Use the following format:

<page group id>/<page id>

CACHE_MODE

NUMBER(1)

Caching mode for the page. Valid values:

- 2 - no caching

- 1 - cache page definition only

- 0 - cache page definition and content for x minutes

- 4 - cache page definition only at system level

- 3 - cache page definition and content at system level for x minutes

CACHE_EXPIRES

NUMBER(38)

Cache period in minutes.

ALLOW_PAGE_STYLE

NUMBER(1)

For templates, indicates if pages can use a different style. Valid values:

- 1 - allow pages to use different style.

ALLOW_PAGE_ACL

NUMBER(!)

For templates, indicates if pages have different access settings. Valid values:

- 1 - allow pages to have different access settings

INIT_JSPFILE

VARCHAR2(256)

For JSP pages, initial JSP file if the JSP source of the page is a JAR or WAR file.

UI_TEMPLATE_ID

NUMBER(38)

ID of HTML page skin.

TEMPLATE_ISPUBLIC

NUMBER(1)

Indicates if the template is ready to use. Valid values:

- 1 - template is ready to use

CONTAINER_ID

NUMBER

ID of the container page.

DEFAULT_ITEM_REGION_ID

NUMBER

ID of the default item region for the page.

DEFAULT_PORTLET_REGION_ID

NUMBER

ID of the default portlet region for the page.

ITEMTYPE_INHERIT_FLAGS

NUMBER(1)

For WebDAV, indicates if default item types are inherited from parent page. Valid values:

- 7 - inherit all item types from parent page

- 0 - specify all types on this page

REGFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for regular files.

ZIPFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for zip files.

IMAGEFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for image files.

DISPLAYINPARENT

NUMBER(1)

Indicates if the page is displayed in its parent page's sub page region. Valid values:

- 1 - display page in parent's sub page region

SEQ

NUMBER

The sequence (order) of the page in its parent page's sub page region.

ALPHABETICAL_SORT

NUMBER(1)

Indicates that sub pages are displayed in alphabetical order. Valid values:

- 1 - display sub pages in alphabetical order

ITEM_PAGE_ID

NUMBER(38)

ID of the item template.

ITEM_PAGE_SITE_ID

NUMBER(28)

Page group ID of the item template.

ITEM_PAGE_TABSTRING

VARCHAR2(512)

Tab strings of the item template. Use the following format:

<tab name>:<sub tab name>:...:<sub tab name>

INHERIT_ITEM_PAGE

NUMBER(1)

For item template only, indicates that items inherit the parent page's item template. Valid values:

- 1 - inherit parent page's item template

ALLOW_ITEM_PAGE_OVERRIDE

NUMBER(1)

For item template only, indicates that items can have their own item template. Valid values:

- 1 - allow items on the page to have their own item template

HAS_INPLACE_ITEM

NUMBER(1)

Indicates if the page or tab has a placeholder item. Valid values:

- 1 - has a placeholder item

TIMEOUT

NUMBER

Limit time, in seconds, used to fetch portlets.

Users need to have Manage privileges on a page to edit its properties.

When updating translatable page attributes, modify_folder updates the translation determined by the session language setting. Therefore to make sure you update the translation with the correct values for all the translatable attributes, you must query the page attributes of the same language first.

Example 11-1 shows how to use the modify_folder API to edit the English translation of the display name of a page.

Example 11-1 Editing Page Properties

declare
l_page     wwsbr_api.page_record;
begin
wwctx_api.set_nls_language(
p_nls_language => wwnls_api.AMERICAN
);
select *
into l_page
from   <schema>.wwsbr_user_pages
where  siteid = 33
and  id = 1
and  language = wwnls_api.AMERICAN;
l_page.title := 'New Page Display Name';
wwsbr_api.modify_folder(
p_page => l_page
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

p_page is the page record for the page you want to modify.

schema is the portal schema (that is, the schema in which Oracle Portal is installed).

11.2 Editing Content

This section contains the following examples:

- Section 11.2.1, "Setting Item Attributes"

- Section 11.2.2, "Editing an Item"

- Section 11.2.3, "Checking Items Out and In"

- Section 11.2.4, "Using Version Control"

Note:

When editing an item, it is good practice to check the item out first to ensure that any changes made by your code are not overwritten by other users. Don't forget to check the item back in after you have completed your edits. For information about checking items out and in, refer to Section 11.2.3, "Checking Items Out and In".

11.2.1 Setting Item Attributes

If you want to set a particular attribute for an item, use the set_attribute API. This API updates the value of an attribute for a particular version of an item. The values provided are validated against the data type of the attribute. You can use this API to set the value of a base attribute (see Table 11-2) or a custom attribute. You cannot use this API to edit rejected items, items marked for deletion, and rejected items that have been marked for deletion.

Example 11-2 shows how you can use the set_attribute API to set a particular attribute for an item.

Tip:

Use the set_attribute API when you want to set a single item attribute. If you want to set multiple item attributes, use the modify_item API (described in Section 11.2.2, "Editing an Item").

Example 11-2 Setting the Display Name of an Item (set_attribute API)

begin
wwsbr_api.set_attribute(
p_site_id           => 37,
p_thing_id          => 8056,
p_attribute_site_id => wwsbr_api.SHARED_OBJECTS,
p_attribute_id      => wwsbr_api.ATTRIBUTE_TITLE,
p_attribute_value   => 'New Display Name'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_site_id is the ID of the page group to which the item belongs.

- p_thing_id is the unique item ID. The item ID identifies the particular version of the item that you want to edit.

- p_attribute_site_id is the ID of the page group to which the attribute belongs. For base attributes, use the wwsbr_api.SHARED_OBJECTS constant.

- p_attribute_id is the ID of the attribute. For base attributes, use the constants from the WWSBR_API package as shown in Table 11-2.

- p_attribute_value is the new value that you want to assign to the attribute. For base attributes, see Table 11-2.

For information about how to obtain an object ID, for example a page group ID or item ID, refer to Section 10.3, "Finding an Object ID".

Table 11-2 provides guidelines for setting the values of base attributes.

Table 11-2 Attribute Values for Base Attributes

Attribute

Constant

Value (p_attribute_value)

Author

wwsbr_api.ATTRIBUTE_AUTHOR

Any varchar2(50) value

Category

wwsbr_api.ATTRIBUTE_CATEGORY

<pagegroupid>_<categoryid>

Character Set

wwsbr_api.ATTRIBUTE_CHARSET

- wwsbr_api.VALUE_BIG5

- wwsbr_api.VALUE_EUC_JP

- wwsbr_api.VALUE_GBK

- wwsbr_api.VALUE_ISO_8859

- wwsbr_api.VALUE_SHIFT_JIS

- wwsbr_api.VALUE_US_ASCII

- wwsbr_api.VALUE_UTF8

- wwsbr_api.VALUE_WINDOWS_1252

Description

wwsbr_api.ATTRIBUTE_DESCRIPTION

Any varchar2(2000) value

Display Name

wwsbr_api.ATTRIBUTE_TITLE

Any varchar2(256) value

Display Option

wwsbr_api.ATTRIBUTE_DISPLAYOPTION

- wwsbr_api.IN_PLACE to display the item directly in place

- wwsbr_api.FULL_SCREEN to display the item in the full browser window

- wwsbr_api.NEW_WINDOW to display the item in a new browser window

Enable Item Check-out

wwsbr_api.ATTRIBUTE_ITEMCHECKOUT

- wwsbr_api.ENABLE_ITEM_FOR_CHECK_OUT

- wwsbr_api.DISABLE_ITEM_FOR_CHECK_OUT

Expiration Period

wwsbr_api.ATTRIBUTE_EXPIRATIONPER

- wwsbr_api.PERMANENT to un-expire the item

- Any numeric value to set the expire mode to NUMBER

- Any date value greater than the publish date to set the expire date to the value passed and the expire mode to DATE

File

wwsbr_api.ATTRIBUTE_FILE

The path and file name of the file that you want to upload

Image

wwsbr_api.ATTRIBUTE_IMAGE

The path and file name of the image that you want to upload

ImageMap

wwsbr_api.ATTRIBUTE_IMAGEMAP

Any varchar2(4000) value

Image Alignment

wwsbr_api.ATTRIBUTE_IMAGEALIGN

- wwsbr_api.ALIGN_TEXT_TOP

- wwsbr_api.ALIGN_ABSOLUTE_BOTTOM

- wwsbr_api.ALIGN_ABSOLUTE_MIDDLE

- wwsbr_api.ALIGN_BOTTOM

- wwsbr_api.ALIGN_RIGHT

- wwsbr_api.ALIGN_TOP

- wwsbr_api.ALIGN_LEFT

- wwsbr_api.ALIGN_MIDDLE

- wwsbr_api.ALIGN_BASELINE

- wwsbr_api.ALIGN_IMAGE_ABOVE_LINK

Item Link

wwsbr_api.ATTRIBUTE_ITEM_LINK

<pagegroupid>_<itemid>

Item Template

wwsbr_api.ATTRIBUTE_ITEM_TEMPLATE

<pagegroupid>_<itemtemplateid>

Keywords

wwsbr_api.ATTRIBUTE_KEYWORDS

Any varchar2(2000) value

Mime Type

wwsbr_api.ATTRIBUTE_MIME_TYPE

Any of the mime type constants in the WWSBR_API package. For example:

- wwsbr_api.VALUE_TEXT_HTML

- wwsbr_api.VALUE_TEXT_PLAIN

- wwsbr_api.VALUE_IMAGE_GIF

For a list of the available mime type constants, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

Name

wwsbr_api.ATTRIBUTE_NAME

Any varchar2(256) value

Specify a name that is unique within the page and all its tabs and sub-pages

Page Link

wwsbr_api.ATTRIBUTE_PAGE_LINK

<pagegroupid>_<pageid>

Perspectives

wwsbr_api.ATTRIBUTE_PERSPECTIVES

<pagegroupid>_<perspectiveid>

Separate multiple perspectives with commas.

Non-existing perspective IDs are identified by the API. Only those perspectives that are available to the page group are added to the item.

PL/SQL

wwsbr_api.ATTRIBUTE_PLSQL

Any varchar2(2000) value

Publish Date

wwsbr_api.ATTRIBUTE_PUBLISHDATE

Any date value

This is a required attribute.

Rollover Image

wwsbr_api.ATTRIBUTE_ROLLOVERIMAGE

The path and file name of the image file that you want to upload

Smart Link

wwsbr_api.ATTRIBUTE_SMARTLINK

- wwsbr_api.VALUE_ACCOUNT_INFO

- wwsbr_api.VALUE_ADVANCED_SEARCHE

- wwsbr_api.VALUE_BUILDER

- wwsbr_api.VALUE_COMMUNITY

- wwsbr_api.VALUE_CONTACT

- wwsbr_api.VALUE_EDIT_PAGE

- wwsbr_api.VALUE_FAVOURITES

- wwsbr_api.VALUE_HELP

- wwsbr_api.VALUE_PORTAL_HOME

- wwsbr_api.VALUE_CUST_MOBILE_HOME_PAGE

- wwsbr_api.VALUE_NAVIGATOR

- wwsbr_api.VALUE_PAGE_GROUP_HOME

- wwsbr_api.VALUE_PERSONAL_PAGE

- wwsbr_api.VALUE_CUSTOMIZE_PAGE

- wwsbr_api.VALUE_PORTLET_REPOS_REF_STATUS

- wwsbr_api.VALUE_PORTLET_REPOS

- wwsbr_api.VALUE_PROPERTY_SHEET

- wwsbr_api.VALUE_REF_PORTLET_REPOS

- wwsbr_api.VALUE_REFRESH_PAGE

- wwsbr_api.VALUE_SUBSCRIBE

Smart Text

wwsbr_api.ATTRIBUTE_SMARTTEXT

- wwsbr_api.VALUE_SMART_TEXT_CURRENT_DATE

- wwsbr_api.VALUE_SMART_TEXT_CURRENT_PAGE

- wwsbr_api.VALUE_SMART_TEXT_CURRENT_USER

Text

wwsbr_api.ATTRIBUTE_TEXT

Any varchar2(4000) value

URL

wwsbr_api.ATTRIBUTE_URL

Any URL value up to varchar2(2000)

Version Number

wwsbr_api.ATTRIBUTE_VERSION_NUMBER

Any positive number. The number does not have to be an integer.

Specify a version number that is unique, that is, it should not be the same as any existing version of the item. If you supply a value that is the same as an existing version number for the item, then it will be set to one more than the highest version number for the item.

11.2.2 Editing an Item

To edit an existing item, use the modify_item API. This API enables you to set the properties of an item and also enables you to perform the following:

- Add new versions of the item (if item version is enabled for the page). See Section 11.2.4, "Using Version Control".

- Enable item level security for the item (if item level security (ILS) is enabled for the page). See Section 15.3, "Setting Item Level Privileges" for an alternative way of doing this.

- Upload files that are associated with the item. If the file that you want to associate with the item has already been uploaded, use the modify_item_post_upload API instead.

You should use this API to edit only those items with an ACTIVE value of 1. That is, do not use it to edit pending, rejected, or deleted items.

You must pass both the item's master ID to identify the item and its ID to identify the specific version of the item that you want to update. The specified ID does not have to be the current version of the item. For information about obtaining an object ID, refer to Section 10.3, "Finding an Object ID".

The modify_item API modifies the value of every attribute, even if the attribute is not passed in the parameter list. If an attribute is not passed, its value will revert to the default value of the parameter. If you want to preserve the current value of attributes, you must retrieve those values for the item and pass them to the API. The value of attributes can be retrieved from the following views and APIs:

- WWSBR_ALL_ITEMS for built-in attributes

- WWSBR_ITEM_ATTRIBUTES for custom attributes

- WWSBR_ITEM_TYPE_ATTRIBUTES for a list of attributes for an item type

- WWSBR_ITEM_PERSPECTIVES for perspectives

- wwsec_api.grantee.list for a list of privileges on the item type. See Section 15.3, "Setting Item Level Privileges" for more information on using this API.

Example 11-3 updates the display name and text of a text item.

Example 11-3 Editing an Item (modify_item API)

declare
l_item_master_id number;
begin
l_item_master_id := wwsbr_api.modify_item(
p_master_item_id => 453,
p_item_id        => 454,
p_caid           => 33,
p_folder_id      => 45,
p_display_name   => 'Movie Review',
p_text           => 'This is the text of the review.'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item. You can look up this value in the MASTERID column of the WWSBR_ALL_ITEMS view.

- p_item_id is the ID of the item. This identifies the version of the item and does not have to be the item's current version.

Tip:

To identify the item's current version, use the following query:

select id
from wwsbr_all_items
where master_id = 453
and is_current_version = 1;

- p_caid is the ID of the page group to which the item belongs.

- p_folder_id is the ID of the page on which the item appears.

- p_display_name is the display name (title) of the item.

- p_text is the text for the item (the item in this example is a text item).

11.2.3 Checking Items Out and In

If an item is enabled for check-out, before editing it, you should check the item out so that other users cannot make changes at the same time (Example 11-4).

Example 11-4 Checking an Item Out and In (check_out_item and check_in_item)

begin
-- Check out the item.
wwsbr_api.check_out_item(
p_master_item_id => 12345, -- Master ID is the same for all versions.
p_caid           => 33
);
-- Update the display name of the item.
wwsbr_api.set_attribute(
p_site_id => 33,
p_thing_id => 8056, -- Unique item ID.
p_attribute_site_id => wwsbr_api.SHARED_OBJECTS,
p_attribute_id      => wwsbr_api.ATTRIBUTE_TITLE,
p_attribute_value   => 'New Display Name'
);
-- Check the item back in.
wwsbr_api.check_in_item(
p_master_item_id => 12345, -- Master ID is the same for all versions.
p_caid           => 33
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_ache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item being checked out or in.

- p_caid is the ID of the page group to which the item belongs.

For information about the set_attribute API used in Example 11-4, refer to Section 11.2.1, "Setting Item Attributes".

Note:

To check whether an item is already checked out, query the IS_ITEM_CHECKEDOUT column of the WWSBR_ALL_ITEMS view. For more information about this view, refer to Section F.2.5, "WWSBR_ALL_ITEMS".

11.2.4 Using Version Control

When you edit an item using the modify_item API, if you set p_addnewversion = TRUE, a new version is created for the item. The new version is given a new ID (the master ID stays the same). If you do not want the new version of the item to be immediately published as the current version, set p_add_as_current_version = FALSE.

Example 11-5 shows how you can use the modify_item API to create a new version of an item.

Example 11-5 Creating a New Version of an Item (modify_item API)

declare
l_item_master_id number;
begin
l_item_master_id := wwsbr_api.modify_item(
p_master_item_id => 453,
p_item_id        => 454,
p_caid           => 33,
p_folder_id      => 45,
p_display_name   => 'Movie Review',
p_text           => 'This is the text of the review.',
p_addnewversion  => true
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

For a description of the parameters used here, see Example 11-3.

11.3 Reorganizing Content

Content is very rarely static, so you may find that you need to move content around within your portal.

This section contains the following examples:

- Section 11.3.1, "Moving an Item to a Different Page"

- Section 11.3.2, "Moving Pages"

11.3.1 Moving an Item to a Different Page

You can use the move_item API to move an item to a different page in the same page group or to a page in a different page group. Moving an item preserves the item's metadata. To move an item to a different page group, the item must not be:

- based on a local item type.

- associated with a local category.

- associated with any local perspectives.

Example 11-6 moves an item from one page group to a page in a different page group.

Example 11-6 Moving an Item to a Different Page Group (move_item API)

begin
wwsbr_api.move_item(
p_caid           => 33,
p_master_item_id => 12345,
p_dest_caid      => 53,
p_dest_page_id   => 1,
p_dest_region_id => 5
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group to which the item currently belongs.

- p_master_item_id is the master ID of the item that you want to move.

- p_dest_caid is the ID of the page group to which you want to move the item.

- p_dest_page_id is the ID of the page to which you want to move the item.

- p_dest_region_id is the ID of the item region of the page in which you want to move the item. If you do not specify a region ID, the item is moved to the page's default item region, which may not be desirable.

11.3.2 Moving Pages

You can use the move_folder API to move a page within the same page group. You cannot move a page to a different page group.

To move a page, users must have Manage privileges on the page being moved and the page under which the page is being moved.

Example 11-7 shows how to move a page.

Example 11-7 Moving a Page (move_folder API)

begin
wwsbr_api.move_folder(
p_id        => 12345,
p_siteid    => 33,
p_parent_id => 10000
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_id is the ID of the page that you want to move.

- p_siteid is the ID of the page group to which the page belongs.

- p_parent_id is the ID of the page under which you want to move the page.

11.3.3 Moving Categories and Perspectives

You can, if necessary, move categories and perspectives around within a page group. You cannot move a category or perspective to a different page group.

To move a category or perspective, a user must have Manage Classifications privileges or higher on the owning page group.

To move a category, use the move_category API, as shown in Example 11-8.

Example 11-8 Moving a Category (move_category API)

begin
wwsbr_api.move_category(
p_src_id => 2000,
p_dest_id => 3000,
p_siteid  => 33
);
exception
...
end;
/

To move a perspective, use the move_perspective API, as shown in Example 11-9.

Example 11-9 Moving a Perspective (move_perspective API)

begin
wwsbr_api.move_perspective(
p_src_id => 2000,
p_dest_id => 3000,
p_siteid  => 33
);
exception
...
end;
/

- p_src_id is the ID of the category or perspective that you want to move.

- p_dest_id is the ID of the category or perspective under which you want to move the category or perspective.

- p_siteid is the ID of the page group to which the category or perspective belongs.

11.4 Copying Content

If you want to add content that is the same as, or similar to, some content that already exists, instead of creating it all over again, you can copy the existing content.

This section contains the following examples:

- Section 11.4.1, "Copying Items"

- Section 11.4.2, "Copying Pages"

11.4.1 Copying Items

You can use the copy_item API to copy an item to a different page in the same page group or to a page in a different page group. To copy an item to a different page group, the item must not be any of the following:

- based on a local item type

- associated with a local category

- associated with any local perspectives

Copying an item preserves the item's metadata.

Example 11-10 copies an item to a page in a different page group:

Example 11-10 Creating a Copy of an Item in a Different Page Group (copy_item API)

begin
wwsbr_api.copy_item(
p_caid           => 33,
p_master_item_id => 12345,
p_dest_caid      => 53,
p_dest_page_id   => 1,
p_dest_region_id => 5
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group to which the item currently belongs.

- p_master_item_id is the master ID of the item that you want to copy.

- p_dest_caid is the ID of the page group to which you want to copy the item.

- p_dest_page_id is the ID of the page to which you want to copy the item.

- p_dest_region_id is the ID of the item region of the page in which you want to copy the item. If you do not specify a region ID, the item is copied to the page's default item region, which may not be desirable.

11.4.2 Copying Pages

You can use the copy_folder API to copy a page within the same page group. You cannot copy a page to a different page group.

To copy a page, users must have View privileges on the page being copied and Manage privileges on the page under which the page is being copied.

Example 11-11 shows how to copy a page.

Example 11-11 Creating a Copy of a Page (copy_folder API)

declare
l_new_pageid number;
begin
l_new_pageid := wwsbr_api.copy_folder(
p_id        => 12345,
p_siteid    => 33,
p_parent_id => 10000
p_name      => 'page1',
p_title     => 'page1'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_id is the ID of the page that you want to copy.

- p_siteid is the ID of the page group to which the page belongs.

- p_parent_id is the ID of the page under which you want to copy the page.

- p_name is the name for the new page created by the copy operation.

- p_title is the display name for the new page created by the copy operation.

11.5 Deleting Content

When content is no longer required, you can use APIs to remove it from the portal and free up space.

This section contains the following examples:

- Section 11.5.1, "Deleting Items"

- Section 11.5.2, "Deleting Pages"

11.5.1 Deleting Items

You can use the delete_item API to delete all versions of an item or just a single specific version. This API also deletes all sub items associated with the versions being deleted. When you delete an item using this API, you can choose to accept the default delete mode for the page group or override this setting.

Example 11-12 deletes version 1 of an item permanently from the page group. The item version is permanently removed, even if the page group is set up to retain deleted items.

Example 11-12 Deleting an Item (delete_item API)

begin
procedure delete_item(
p_master_item_id => 48037,
p_caid           => 54,
p_version_number => 1,
p_mode           => wwsbr_api.DELETE_ITEM_PURGE
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item that you want to delete.

- p_caid is the ID of the page group to which the item belongs.

- p_version_number is the version of the item that you want to delete. If you attempt to delete the current version of the item, the ITEM_ACTIVE_VERSION exception is raised. If you do not specify an item version, all versions of the item are deleted.

Tip:

If you want to delete the current version of the item, you must either delete all versions, or use the Oracle Portal user interface to revert to a previous version.

- p_mode is the mode to use when deleting the item. It can take the following values:

- wwsbr_api.DELETE_ITEM_DEFAULT uses the page group setting.

- wwsbr_api.DELETE_ITEM_PURGE deletes the item immediately, regardless of the page group setting.

- wwsbr_api.DELETE_ITEM_LAZYDELETE marks the item as deleted, regardless of the page group setting.

To restore a previously deleted item, use the undelete_item API (Example 11-13). If the item had any sub-items, those sub-items are also restored.

Note:

You can restore a deleted item only if the page group that owns the item is set up to retain deleted items, or the item was deleted using the wwsbr_api.DELETE_ITEM_LAZYDELETE mode, and the item has not been purged from the content repository.

Example 11-13 Restoring a Previously Deleted Item (undelete_item API)

begin
wwsbr_api.undelete_item(
p_thing_id => 12345,
p_caid     => 33
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_thing_id is the unique ID of the deleted item that you want to restore.

- p_caid is the ID of the page group to which the item belongs.

11.5.2 Deleting Pages

Use the delete_folder API to delete a page. Users need to have Manage privileges on the page to be able to delete it.

Note:

Deleted pages cannot be restored by another API call.

Example 11-14 shows how to delete a page.

Example 11-14 Deleting a Page (delete_folder API)

begin
wwsbr_api.delete_folder(
p_id     => 12345,
p_siteid => 33
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_id is the ID of the page that you want to delete.

- p_siteid is the ID of the page group to which the page belongs.

12 Extending Your Portal

This chapter describes how to use the APIs provided with Oracle Portal to extend your portal. It contains the following sections:

- Section 12.1, "Creating a Page Group"

- Section 12.2, "Creating Pages"

- Section 12.3, "Creating Categories and Perspectives"

- Section 12.4, "Creating Items"

- Section 12.5, "Setting Perspectives Attributes of Pages and Items"

- Section 12.6, "Approving and Rejecting Items"

For more information about any of these APIs, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

Tip:

Remember, if you are calling the APIs from a Web provider or external application, you need to set the session context first. For more information, refer to Section 10.1, "Setting the Session Context".

12.1 Creating a Page Group

To create a new page group, use the add_content_area API as shown in Example 12-1.

Example 12-1 Creating a Page Group (add_content_area API)

declare
l_new_page_group_id number;
begin
-- Create the page group.
l_new_page_group_id := wwsbr_api.add_content_area(
p_name             => 'ENTERTAINMENT',
p_display_name     => 'Entertainment Page Group',
p_versioning       => wwsbr_api.VERSIONING_AUDIT,
p_default_language => 'us'
);
-- process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_name is the internal name for the new page group. This name is used in path based URLs and must be unique.

- p_display_name is the display name for the new page group.

- p_versioning is the version level for items in the page group. It can take the following values:

- wwsbr_api.VERSIONING_NONE

- wwsbr_api.VERSIONING_SIMPLE

- wwsbr_api.VERSIONING_AUDIT

- p_default_language is the default language for the page group.

12.2 Creating Pages

If you want to create a new page, use the add_folder API. By default, the new page has two regions: a portlet region containing the default navigation page of the page group, and an item region. This means that pages created programmatically, rather than through the Oracle Portal user interface, may be quite limited in their layout.

However, you can programmatically create pages with a more sophisticated layout by basing the parent page of the new page on a Portal Template with the desired layout. Then if you configure the page group to automatically copy parent page properties, your new page will use the same template as its parent. Using this method means that your pages can have any layout that you require.

You cannot use this API to create JSP pages or navigation pages. To create these types of pages, use the Create Page Wizard in Oracle Portal.

If the page type on which you base the page has default values set for any page properties, these values override any values set using this API.

To define privileges for your new page, use the APIs in the WWSEC_API package (Example 12-2). For more information, refer to Section 15.2, "Setting Page Level Privileges".

Example 12-2 Creating a Page (add_folder API)

declare
l_new_page_id       number;
l_caid              number := 33;
begin
-- create the page.
l_new_page_id := wwsbr_api.add_folder(
p_caid             => l_caid,
p_name             => 'ENTERTAINMENT',
p_display_name     => 'Entertainment Page',
p_type_id          => wwsbr_api.FOLDER_TYPE_CONTAINER,
p_type_caid        => wwsbr_api.SHARED_OBJECTS,
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group to which you want to add the page.

- p_name is the internal name for the new page. This name is used in path based URLs.

- p_display_name is the display name (title) for the new page.

- p_type_id is the ID of the page type on which you want to base the page. The page type must be available to the page group in which you are creating the page. Seeded page types have the following constants defined:

- wwsbr_api.FOLDER_TYPE_CONTAINER

- wwsbr_api.FOLDER_TYPE_URL

- wwsbr_api.FOLDER_TYPE_PLSQL

- A value from the ID column of the WWSBR_FOLDER_TYPES view

You can find the IDs for custom page types by querying the ID column of the WWSBR_FOLDER_TYPES view.

- p_type_caid is the ID of the page group to which the page type used for the page belongs. This value must be the same as the page group in which you are creating the page (p_caid) or the Shared Objects page group (use the wwsbr_api.SHARED_OBJECTS constant).

12.3 Creating Categories and Perspectives

If you have already defined a quite large taxonomy for your portal, you might prefer to set it up programmatically, rather than use the Oracle Portal user interface.

Use the add_category API to create a new category (Example 12-3). Use the add_perspective API to create a new perspective (Example 12-4). To create a category or perspective, users must have Manage Classifications privileges or higher on the page group.

Example 12-3 Creating a Category (add_category API)

declare
l_new_category_id number;
l_caid            number := 33;
begin
l_new_category_id := wwsbr_api.add_category(
p_caid         => l_caid,
p_parent_id    => 0,
p_name         => 'newcategory1',
p_display_name => 'New Category 1'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

Example 12-4 Creating a Perspective (add_perspective API)

declare
l_new_perspective_id number;
l_caid               number := 33;
begin
l_new_perspective_id := wwsbr_api.add_perspective(
p_caid         => 33,
p_parent_id    => 0,
p_name         => 'newperspective1',
p_display_name => 'New Perspective 1'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group in which you want to create the category or perspective.

- p_parent_id is the ID of the category or perspective under which you want to create the new category or perspective. If this is a top-level category or perspective, use 0 (zero).

- p_name is the internal name for the new category or perspective.

- p_display_name is the display name for the new category or perspective.

12.4 Creating Items

To create an item on a page, use the add_item API (Example 12-5).

This API returns the master ID of the item, which is not the item's unique ID. To look up the ID of the item after it is created, query the WWSBR_ALL_ITEMS view as shown in Example 10-7. For more information about the difference between an item's unique ID and its master item ID, refer to Section 10.2, "API Parameters".

Example 12-5 Creating a Text Item (add_item API)

declare
l_new_item_master_id number;
begin
l_new_item_master_id := wwsbr_api.add_item(
p_caid              => 33,
p_folder_id         => 13923,
p_display_name      => 'Movie Review',
p_type_id           => wwsbr_api.ITEM_TYPE_TEXT,
p_type_caid         => wwsbr_api.SHARED_OBEJCTS,
p_region_id         => 5,
p_text              => 'This is the text of the review.',
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group that owns the page in which you want to create the item.

- p_folder_id is the ID of the page in which you want to create the item.

- p_display_name is the display name (title) of the new item.

- p_type_id is the ID of the item type on which the item is based. Use the constants defined in the WWSBR_API package. Example are as follows:

- wwsbr_api.ITEM_TYPE_FILE

- wwsbr_api.ITEM_TYPE_TEXT

- wwsbr_api.ITEM_TYPE_URL

For a full list of constants for the seeded item types, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

You can find the IDs for custom item types by querying the ID column of the WWSBR_ITEM_TYPES view.

The item type must be available in the page group on which you are creating the item, and therefore listed in the WWSBR_CONTENT_AREA_ITEM_TYPES view.

- p_type_caid is the ID of the page group to which the item type used for the item belongs. This value must be the same as the page group to which you are adding the item (p_caid), or the Shared Objects page group (use the wwsbr_api.SHARED_OBJECTS constant).

- p_region_id is the ID of the region in which you want to create the item. If you do not specify a region, or if the region ID is invalid, the item is placed in the default item region for the page. Use the WWSBR_ALL_FOLDER_REGIONS view to look up the region ID.

- p_text is the text for a text item.

Creating File Items

If an object is associated with one or more files (for example, images, file items, and so on), its APIs allow you to upload these files when creating or modifying the object. You can pass a file location consisting of a directory path and file name to the file and image parameters for these APIs. The directory in which you place the files must be visible to your database (that is, local to the database server) and the files themselves must have proper permissions. If you see strange exceptions resulting from API calls in which you are trying to upload files, double check the permissions on the directories and files.

When the file that you want to upload resides on the same server as the database in which Oracle Portal is installed, you can upload the file at the same time as you create or update the item. Example 12-6 shows how you might do this.

Example 12-6 Creating a File Item (add_item API)

declare
l_item_masterthing_id number;
begin
-- Add an item that resides on the same server as the OracleAS Portal
-- content repository database.
l_item_masterthing_id := wwsbr_api.add_item(
p_caid          => 53,  -- A known page group ID.
p_folder_id     => 1,   -- A known page ID.
p_display_name  => 'My File',
p_type_id       => wwsbr_api.ITEM_TYPE_FILE,
p_type_caid     => wwsbr_api.SHARED_OBJECTS,
p_region_id     => 513, -- A known region on the page.
p_description   => 'Description of my file',
p_file_filename => '/tmp/myfile.txt'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_caid is the ID of the page group that owns the page in which you want to create the item.

- p_folder_id is the ID of the page in which you want to create the item.

- p_display_name is the display name (title) of the new item.

- p_type_id is the ID of the item type on which the item is based.

- p_type_caid is the ID of the page group to which the item type used for the item belongs. This value must be the same as the page group to which you are adding the item (p_caid), or the Shared Objects page group (use the wwsbr_api.SHARED_OBJECTS constant).

- p_region_id is the ID of the region in which you want to create the item. If you do not specify a region, or if the region ID is invalid, the item is placed in the default item region for the page. Use the WWSBR_ALL_FOLDER_REGIONS view to look up the region ID.

- p_description is a description of the item.

- p_file_filename is the directory path and file name of the file associated with this item. The file must be located on the same server as database in which Oracle Portal is installed.

If the file does not reside on the same server as the database in which Oracle Portal is installed, you must first load the file into the content repository document tables using the upload_blob API (Example 12-7). The upload_blob API returns a unique document name. Use the add_item_post_upload API to create a new item that claims the file specified by the returned document name.

Note:

Your calling application must declare a BLOB and assign it to an object compatible with the database BLOB data type (refer to Application Developer's Guide - Large Objects in your Oracle Database documentation set). You can then pass the BLOB to the p_blob parameter of the upload_blob API.

Example 12-7 Uploading a File to the Content Repository and Creating a File Item Using the Uploaded File (upload_blob API and add_item_post_upload API)

declare
l_blob                blob;
l_blob_filename       varchar2(250);
l_mime_type           varchar2(100) := 'text/html';
l_doc_name            varchar2(500);
l_display_name        varchar2(250);
l_region_id           number        := 2013;
l_file_name           varchar2(100);
l_image_name          varchar2(100);
l_site_id             number        := 73;
l_page_id             number        := 1;
l_item_type_id        number        := wwsbr_api.ITEM_FILE_TYPE;
l_item_type_siteid    number        := wwsbr_api.SHARED_OBJECTS;
l_description         varchar2(1000);
l_item_masterthing_id number;
begin
-- Your calling application must define the my_get_blob() function and retrieve
-- your document into a blob so that it can be uploaded in the subsequent step.
l_blob := my_get_blob('8001.HTML');
-- Upload the BLOB to the Oracle Portal document table.
l_blob_filename := 'index2.html';
l_doc_name := wwsbr_api.upload_blob(
p_file_name => l_blob_filename,
p_blob      => l_blob,
p_mime_type => l_mime_type
);
l_display_name := l_blob_filename;
l_file_name := l_doc_name;
l_description := 'File uploaded to portal = ' || l_doc_name;
-- Use add_item_post_upload() to claim the document and add the item to a page.
l_item_masterthing_id := wwsbr_api.add_item_post_upload(
p_caid          => l_site_id,
p_folder_id     => l_page_id,
p_display_name  => l_display_name,
p_file_name     => l_file_name,
p_type_id       => l_item_type_id,
p_type_caid     => l_item_type_siteid,
p_region_id     => l_region_id,
p_description   => l_description,
p_display_option => wwsbr_api.FULL_SCREEN
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

The following are parameters for upload_blob:

- p_file_name is the file name that you want to assign to the BLOB. This is not the value returned by the function. Usually this is the file name by which the file is known on the source file system.

- p_blob is the BLOB containing the content.

- p_mime_type is the MIME type for the BLOB. Use the predefined constants provided in the WWSBR_API package.

The following are parameters for add_item_post_upload:

- p_caid is the ID of the page group that owns the page in which you want to create the item.

- p_folder_id is the ID of the page in which you want to create the item.

- p_display_name is the display name (title) of the new item.

- p_file_name is the internal document name for the file item, matching a document in the document table. Pass the value returned by upload_blob to this parameter to reference the uploaded document as the file for this item.

- p_type_id is the ID of the item type on which the item is based.

- p_type_caid is the ID of the page group to which the item type used for the item belongs. This value must be the same as the page group to which you are adding the item (p_caid), or the Shared Objects page group (use the wwsbr_api.SHARED_OBJECTS constant).

- p_region_id is the ID of the region in which you want to create the item. If you do not specify a region, or if the region ID is invalid, the item is placed in the default item region for the page. Use the WWSBR_ALL_FOLDER_REGIONS view to look up the region ID.

- p_description is a description of the item.

- p_file_filename is the directory path and file name of the file associated with this item. The file must be located on the same server as database in which Oracle Portal is installed.

- p_display_option is how the item should be displayed. Use the following predefined constants:

- wwsbr_api.FULL_SCREEN to display a link that, when clicked, displays the item in the same browser window.

- wwsbr_api.NEW_WINDOW to display a link that, when click, displays the item in a new browser window.

- wwsbr_api.IN_PLACE to display the item in the region (this applies to text and PL/SQL items only).

If you have already created the item that you want to use to claim the uploaded document, use the modify_item_post_upload API.

12.5 Setting Perspectives Attributes of Pages and Items

When creating a page or item you can, optionally, specify the perspectives that apply to that page or item.

Example 12-8 shows how you specify the perspectives that apply to a page when creating the page. Example 12-9 shows how you specify the perspectives that apply to an item when creating the item.

Example 12-8 Specifying Perspectives When Creating a Page

declare
l_new_page_id       number;
l_perspective_ids   wwsbr_api.g_perspectiveidarray;
l_perspective_caids wwsbr_api.g_caid_array;
begin
select id, caid
bulk collect into l_perspective_ids, l_perspective_caids
from wwsbr_all_perspectives
where caid in (l_caid, wwsbr_api.shared_objects);
l_new_page_id := wwsbr_api.add_folder(
p_caid             => 33,
p_name             => 'ENTERTAINMENT',
p_display_name     => 'Entertainment Page',
p_type_id          => wwsbr_api.FOLDER_TYPE_CONTAINER,
p_type_caid        => wwsbr_api.SHARED_OBJECTS,
p_perspectives     => l_perspective_ids,
p_perspective_caid => l_perspective_caids
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

Example 12-9 Specifying Perspectives When Creating an Item

declare
l_new_item_master_id number;
l_perspective_ids    wwsbr_api.g_perspectiveidarray;
l_perspective_caids  wwsbr_api.g_caid_array;
begin
-- Select perspectives with the name prefix = 'ENTERTAINMENT'.
select id, caid
bulk collect into l_perspective_ids, l_perspective_caids
from wwsbr_all_perspectives
where caid in (l_caid, wwsbr_api.shared_objects) and
display_name like 'ENTERTAINMENT%';
l_new_item_master_id := wwsbr_api.add_item(
p_caid              => 33,
p_folder_id         => 13923,
p_display_name      => 'Movie Review',
p_type_id           => wwsbr_api.ITEM_TYPE_TEXT,
p_type_caid         => wwsbr_api.SHARED_OBEJCTS,
p_region_id         => 5,
p_text              => 'This is the text of the review.',
p_perspectives      => l_perspective_ids,
p_perspectives_caid => l_perspective_caids
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_perspectives is an array of perspective IDs.

- p_perspective_caid is an array of page group IDs for the perspectives identified in p_perspectives. The position of each element in this array must match the position of the corresponding perspective ID in p_perspectives. The values in p_perspective_caid must be the same as the page group in which you are creating the page or item (p_caid) or the Shared Objects page group (use the wwsbr_api.SHARED_OBJECTS constant).

For descriptions of the other parameters in these examples, refer to Example 12-2 and Example 12-5.

12.6 Approving and Rejecting Items

The WWSBR_API package includes two APIs to help with managing approvals. To see how you might use these APIs in conjunction with the Content Management Event Framework, refer to Section 16.7, "Example: Item Validation" and Section 16.8, "Example: Integrating External Workflow"

Example 12-10 shows how to approve a pending item. Example 12-11 shows how to reject a pending item.

Example 12-10 Approving an Item

begin
wwsbr_api.approve(
p_item_id => 8056,
p_site_id => 53,
p_comment => 'Item approved'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
end;
/

Example 12-11 Rejecting an Item

begin
wwsbr_api.reject(
p_item_id => 8056,
p_site_id => 53,
p_comment => 'Item rejected'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
end;
/

- p_item_id is the unique ID of the item being approved or rejected.

- p_site_id is the ID of the page group to which the item belongs.

- p_comment provides additional information about the approval or rejection of the item.

13 Searching Portal Content

This chapter describes how to use the public search APIs provided with Oracle Portal. The search APIs are available in the WWSRC_API package.

The public search APIs enable you to search your portal programmatically and return search results as content records or an XML document. Using these APIs, you can design completely custom search forms that seamlessly integrate with Oracle Portal pages. You can also customize how portal search results get displayed on a page; you are no longer limited to the search results portlet provided with Oracle Portal. As the public search APIs can return the results in XML, you may process or format the search results however you require.

You can also use the search APIs to display portal content in any custom application. For example, if you have a Web-based application you could easily provide a search form in the application and display the search results from Oracle Portal there as well.

The WWSRC_API package provides the following two types of API:

- Search submission/execution APIs

- Item search

- Page search

- Category search

- Perspective search

- Search results APIs

- Get item results as XML document

- Get page results as XML document

To determine the structure of the search results returned by the search APIs, refer to the appropriate secure content repository view, as shown in Table 13-1.

Table 13-1 Search Results to Secure View Mapping

Search API

Secure Content Repository View

wwsrc_api.item_search

WWSBR_ALL_ITEMS

wwsrc_api.page_search

WWSBR_ALL_FOLDERS

wwsrc_api.category_search

WWSBR_ALL_CATEGORIES

wwsrc_api.perspective_search

WWSBR_ALL_PERSPECTIVES

For example, the results returned by the item_search API have the same structure as the WWSBR_ALL_ITEMS view. For information about the structure of the secure views, refer to Chapter F, "Content Management APIs and Views".

This chapter contains the following sections:

- Section 13.1, "Searching For Items Across All Page Groups"

- Section 13.2, "Searching For Pages in Specific Page Groups"

- Section 13.3, "Searching For Items By Attribute"

- Section 13.4, "Transforming Search Results into XML"

- Section 13.5, "Displaying Search Results"

For the examples in the following sections, you need to enable output in SQL*Plus. To do this log on to SQL*Plus as the portal schema owner and enter the following command:

SQL> SET SERVEROUTPUT ON

For more information about the public search APIs, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, and then click PL/SQL API Reference (APIs and References section).

Tip:

Remember, if you are calling the APIs from a Web provider or external application, you need to set the session context first. For more information, refer to Section 10.1, "Setting the Session Context".

13.1 Searching For Items Across All Page Groups

Example 13-1 uses the item_search API to search all the page groups in your portal for items that contain the term 'portal'.

Example 13-1 Searching Across All Page Groups (item_search API)

declare
l_results    wwsrc_api.items_result_array_type;
l_count      number;
l_scores     wwsrc_api.number_list_type;
begin
l_results := wwsrc_api.item_search(
p_mainsearch => 'portal',
p_out_count  => l_count,
p_out_scores => l_scores
);
dbms_output.put_line('Number of results: ' || l_count);
exception
...
end;
/

- p_mainsearch is the keyword or term for which you want to search. This may be any value, including an Oracle Text query expression.

- p_out_count is the number of search hits.

- p_out_scores is an array of search results scores. This is the Oracle Text relevancy score, rating how well each result matches the search term (or any other textual search criteria). The index of the array matches the index of the results array returned by the function.

In Example 13-1, the maximum number of search results that may be returned is determined by the wwsrc_api constant MAX_ROWS (default is 1000). This avoids the possibility of a search query with many hits taking too long to run if a specific number of rows is not specified. For an example of how to specify the number of rows to return see Example 13-2.

13.2 Searching For Pages in Specific Page Groups

Example 13-2 uses the page_search API to search in two specific page groups (MyPageGroup and Shared) for pages that contain the term 'Oracle'. In this example, only the first ten results are returned.

Example 13-2 Searching in Specific Page Groups (page_search API)

declare
l_results   wwsrc_api.pages_result_array_type;
l_count     number;
l_scores    wwsrc_api.number_list_type;
l_pggroups  wwsrc_api.number_list_type;
begin
l_pggroups(1) := 0;  -- Page group  0 (shared).
l_pggroups(2) := 33; -- Page group 33 (mypagegroup).
l_results := wwsrc_api.page_search(
p_mainsearch  => 'Oracle',
p_page_groups => l_pggroups,
p_rows        => 10,
p_out_count   => l_count,
p_out_scores  => l_scores
);
dbms_output.put_line('Number of results:' || l_count);
exception
...
end;
/

- p_mainsearch is the keyword or term for which you want to search. This may be any value, including an Oracle Text query expression.

- p_page_groups is an array of the IDs of the page groups that you want to search. If you do not include this parameter, the value defaults to wwsrc_api.EMPTY_NUMBER_LIST (that is, all page groups).

- p_rows is the maximum number of search results to return. This defaults to the wwsrc_api constant value MAX_ROWS.

- p_out_count is the number of search hits.

- p_out_scores is an array of search result scores. This is the Oracle Text relevancy score, rating how well each result matches the search term (or any other textual search criteria). The index of the array matches the index of the results array returned by the function.

13.3 Searching For Items By Attribute

Example 13-3 uses the specify_attributes and item_search APIs to search for all file items created by Joe Bloggs since 01-Jan-2004 that contain the term 'Oracle'.

Example 13-3 Searching Specific Attributes (specify_attributes API)

declare
l_results           wwsrc_api.items_result_array_type;
l_count             number;
l_scores            wwsrc_api.number_list_type;
l_attributes        wwsrc_runtime_attr_varray;
l_createdate_attrid wwsbr_attributes.id%type;
l_createdate_caid   wwsbr_attributes.caid%type;
l_createdate_type   wwsbr_attributes.data_type%type;
begin
-- Build up attribute object with author criteria.
wwsrc_api.specify_attributes(
p_id                 => wwsbr_api.ATTRIBUTE_AUTHOR,
p_siteid             => wwsbr_api.SHARED_OBJECTS,
p_value              => 'Joe Bloggs',
p_operator           => wwsrc_api.CONTAINS_ALL,
p_datatype           => wwsrc_api.DATA_TYPE_TEXT,
p_in_out_attr_varray => l_attributes
);
-- Build up attribute object with create date criteria
-- using wwsbr_attributes view.
select id, caid, data_type
into l_createdate_attrid, l_createdate_caid, l_createdate_type
from wwsbr_attributes
where name = 'createdate'
and rownum = 1; -- Ignore translations.
wwsrc_api.specify_attributes(
p_id                 => l_createdate_attrid,
p_siteid             => l_createdate_caid,
p_value              => '01-JAN-2004',
p_operator           => wwsrc_api.GREATER_THAN,
p_datatype           => l_createdate_type,
p_in_out_attr_varray => l_attributes
);
-- Perform the search.
l_results := wwsrc_api.item_search(
p_mainsearch     => 'Oracle',
p_itemtypeid     => wwsbr_api.ITEM_TYPE_FILE,
p_itemtypesiteid => wwsbr_api.SHARED_OBJECTS,
p_attributes     => l_attributes,
p_out_count      => l_count,
p_out_scores     => l_scores
);
dbms_output.put_line('Number of results: ' || l_count);
exception
...
end;
/

The following are parameters for specify_attributes:

- p_id is the ID of the attribute. Use the wwsbr_api constants or query the WWSBR_ATTRIBUTES view to find this ID.

- p_siteid is the ID of the page group to which the attribute belongs.

- p_value is the attribute value to include as search criteria. This must be a text value.

- p_operator is the search operator that you want to use.

- p_datatype is the datatype of the attribute value.

- p_in_out_attr_varray is the existing varray of attributes (if any).

The following are parameters for item_search:

- p_mainsearch is the keyword or term for which you want to search. This may be any value, including an Oracle Text query expression.

- p_itemtypeid is the ID of the type of item for which you want to search. Use the wwsbr_api constants or query the WWSBR_ITEM_TYPES view to find this ID. Note that this is the actual subtype of the item, not the base type.

- p_itemtypesiteid is the ID of the page group to which the item type belongs.

- p_attributes is an array of attributes to search together with their operators and values. You can build up the values for this parameter by calling the specify_attributes API.

- p_out_count is the number of search hits.

- p_out_scores is an array of search result scores. This is the Oracle Text relevancy score, rating how well each result matches the search term (or any other textual search criteria). The index of this array matches the index of the results array returned by the function.

13.4 Transforming Search Results into XML

The APIs mentioned so far return search results in an array. To provide you with more flexibility about how to display your search results, Oracle Portal also provides several APIs that return search results as XML. These APIs return the XML results as a CLOB.

The following sections describe how you can generate a physical XML file from a CLOB produced by the search APIs and store the XML file in a directory on the Oracle Portal middle tier:

1. Section 13.4.1, "Creating a Directory for the XML File".

2. Section 13.4.2, "Creating an XML File from a CLOB"

3. Section 13.4.3, "Generating Search Results in XML"

These examples assume that the database is on the same machine as the Oracle Portal middle tier.

13.4.1 Creating a Directory for the XML File

If you decide to transform your search results into an XML file, you must first perform some set up tasks to define the physical directory in which to write the file.

To create a directory on the Oracle Portal middle tier, perform the following steps:

1. In SQL*Plus, connect as SYSTEM or SYS and enter the following command:

create directory <dirname> as '<physical_location>';

For example:

create directory RESULTDIR as '/u02/ora/OraHome_101202_PortalMF/Apache/Apache/htdocs/searchapi';

In this example, we use the htdocs directory of the Oracle Portal middle tier. This is a good location to use as you can then access the XML results file through HTTP, in the format:

http://<Portal_Mid_Tier>:<Port>/<directory>/<XML_Output_File>

For example:

http://my.portal.com:7778/searchapi/results.xml

You can then use this to specify the XML file as the data source for OmniPortlet. For an example of how to do this, refer to Section 13.5.1, "Displaying XML Search Results in OmniPortlet".

2. Still in SQL*Plus, grant write privileges to the directory from PL/SQL programs. In our example, we would do this by entering the following command:

grant write on directory RESULTDIR to public;

3. Check that you can write files to the new directory by running the following procedure:

declare
2 v_output_file1 utl_file.file_type;
3 begin
4 v_output_file1 := utl_file.fopen('RESULTDIR', 'NEW.txt', 'a');
5 utl_file.put_line(v_output_file1, 'NATURE and Beauty');
6 utl_file.fclose_all;
7 end;
8 /

PL/SQL procedure successfully completed.

Now, when you go to the directory on the file system, you should see the NEW.txt file.

13.4.2 Creating an XML File from a CLOB

When you have specified the location for the XML output, you can write the procedure that creates it. Example 13-4 shows a generic procedure that takes the CLOB produced by the get_all_items_xml API and writes an XML file to a specific location. It takes two input parameters: the file name and the CLOB.

Example 13-4 Writing an XML File to a Specific File System Location

create or replace procedure results_xml_to_file(xml_filename varchar2, result_xml clob) as
l_amount binary_integer;
l_offset number := 1;
l_text   varchar2(32767);
l_file   utl_file.file_type;
l_clob   clob;
begin
l_clob := result_xml;
l_file := utl_file.fopen(
location  => 'RESULTDIR', -- Directory name is case-sensitive.
filename  => xml_filename,
open_mode => 'w'
);
l_amount := 32767;
l_offset := 1;
begin
dbms_lob.open(l_clob, dbms_lob.file_readonly);
loop
dbms_lob.read(l_clob, l_amount, l_offset, l_text);
utl_file.put(
file   => l_file,
buffer => l_text
);
l_offset := l_offset + l_amount;
exit when l_amount < 32767;
end loop;
utl_file.new_line(file => l_file);
dbms_lob.close(l_clob);
end;
utl_file.fclose(file => l_file);
exception
...
end;
/

13.4.3 Generating Search Results in XML

Now, when you use the APIs to produce search results as XML, you can call the procedure in Example 13-4 to write the resulting CLOB to an XML file on the file system. Example 13-5 shows how you might do this.

Example 13-5 Generating Search Results in XML (get_all_items_xml API)

declare
l_results   wwsrc_api.items_result_array_type;
l_scores    wwsrc_api.number_list_type;
l_count     number;
l_clob      clob;
begin
l_results := wwsrc_api.item_search(
p_mainsearch => 'portal',
p_out_count  => l_count,
p_out_scores => l_scores
);
l_clob := wwsrc_api.get_all_items_xml(l_results);
results_xml_to_file('results12.xml', l_clob);
exception
...
end;
/

For information about the item_search API used inExample 13-5, refer to Section 13.1, "Searching For Items Across All Page Groups".

You can use the XML file generated by this API as a data source for OmniPortlet. For an example of how you might do this, refer to Section 13.5.1, "Displaying XML Search Results in OmniPortlet".

13.4.4 Workaround for get_item_xml

When you use get_item_xml to transform search results to XML, the API produces a <?xml version="1.0"?> element for each search result. This produces invalid XML. Example 13-6 shows a workaround that removes these tags and also adds opening and closing <ResultSet> tags to produce an XML file with the ROWSET/ROW structure. If you want to use the XML file as a data source for OmniPortlet, you should do something similar.

Note:

Example 13-6 loops through the search results and writes them all to XML (producing the same results as using get_all_items_xml). Typically, you would use get_item_xml to filter the search results somehow.

Example 13-6 Using get_item_xml to Write Search Results to a File

declare
l_amount    binary_integer;
l_offset    number       := 1;
l_text      varchar2(32767);
l_file      utl_file.file_type;
l_clob      clob;
l_results   wwsrc_api.items_result_array_type;
l_scores    wwsrc_api.number_list_type;
l_count     number;
begin
l_results := wwsrc_api.item_search(
p_mainsearch => 'portal',
p_out_count  => l_count,
p_out_scores => l_scores
);
l_file := utl_file.fopen(
location  => 'RESULTDIR', -- Directory name is case-sensitive.
filename  => 'results14.xml',
open_mode => 'w'
);
utl_file.put(
file   => l_file,
buffer => '<ResultSet>'
);
for i in 1..l_results.count loop
l_amount := 32767;
l_offset := 1;
begin
l_clob := wwsrc_api.get_item_xml(l_results(i));
dbms_lob.open(l_clob, dbms_lob.file_readonly);
loop
dbms_lob.read(l_clob, l_amount, l_offset, l_text);
-- Workaround for XML generated with get_item_xml.
if instr(l_text, '?>') != 0 then
l_text := substr(l_text, instr(l_text, '?>') + 2);
end if;
-- End of workaround.
utl_file.put(
file   => l_file,
buffer => l_text
);
l_offset := l_offset + l_amount;
exit when l_amount < 32767;
end loop;
utl_file.new_line(file => l_file);
dbms_lob.close(l_clob);
end;
end loop;
utl_file.put(
file   => l_file,
buffer => '</ResultSet>'
);
utl_file.fclose(file => l_file);
exception
...
end;
/

13.5 Displaying Search Results

For your search query to be useful, you need to display the results somewhere. You can choose to display the results of the search directly from the array, for example, in a dynamic page. For more flexibility, you can transform the search results into XML first and then display the XML, for example in OmniPortlet.

13.5.1 Displaying XML Search Results in OmniPortlet

The steps in this section provide an example of how to use the XML generated by the search APIs as the data source for OmniPortlet. For example, you could schedule a job to regularly execute an API to produce search results as XML and then automatically display those results in an OmniPortlet.

For more information about OmniPortlet, refer to Chapter 3, "Creating Portlets with OmniPortlet".

Note:

The XML produced by the search APIs is returned in a CLOB. Therefore, if you want to use the XML as a data source for OmniPortlet, you must first write the CLOB to a file. For an example of how to do this, refer to Section 13.4, "Transforming Search Results into XML".

To display XML search results in OmniPortlet, perform the following steps:

1. First you need to add a new OmniPortlet instance to a page.

Tip:

OmniPortlet is usually available in the Portlet Builders area of the Portlet Repository.

2. Click the Define link to launch the OmniPortlet Wizard.

3. On the Type page of the wizard, select XML, then click Next.

4. On the Source page, in the XML URL field, enter the URL of your XML file, for example:

http://my.portal.com:7778/searchapi/results.xml

Because the XML data produced by the search APIs uses a ROWSET/ROW structure, you do not need to specify an XSL filter.

5. Click Next.

6. On the View page, select Tabular for the Layout Style, then click Next.

7. On the Layout page, choose the columns you want to display in the portlet and how you want them to appear.

8. Click Finish to create the OmniPortlet instance.

13.5.2 Displaying Search Results in a Dynamic Page

The following two examples show how to display search results in a dynamic page portlet. Users can then add this portlet to any page within your portal. To do this, perform the following steps:

1. Create a procedure that the dynamic page can call to perform the search.
The procedure in Example 13-7 uses the item_search API to search for a specified term (searchterm) and displays only those results with a score higher than a specified value (score).

Note:

You must create the procedure in the database in which your portal resides.

Example 13-7 Procedure to Perform the Search

create or replace procedure search_results(searchterm varchar2, score number) as
x varchar2(100);
y number;
l_results   wwsrc_api.items_result_array_type;
l_count     number;
l_scores    wwsrc_api.number_list_type;
begin
x := searchterm;
y := score;
l_results := wwsrc_api.item_search(
p_mainsearch => x,
p_out_count  => l_count,
p_out_scores => l_scores
);
htp.p('Number of total hits: ' || l_count);
htp.p('<br>');
htp.p('<br>');
for i in 1..l_results.count loop
if (l_scores(i) > y) then
htp.p('<b>' || i || '</b> - <a href="' || l_results(i).url ||
'">' || l_results(i).display_name || '</a>');
htp.p('<br>');
htp.p('score = ' || l_scores(i));
htp.p('<br>');
end if;
end loop;
exception
...
end;
/
grant execute on search_results to public;

For information about the item_search API used inExample 13-7, refer to Section 13.1, "Searching For Items Across All Page Groups".

2. Create the dynamic page.
A dynamic page is one of the portlets you can build using the Oracle Portal Portlet Builder. For more information about Portlet Builder, refer to the Oracle Fusion Middleware Developer's Guide for Oracle Portal. For more information about building dynamic pages, refer to the Oracle Portal online Help.

Example 13-8 shows the code to use for the dynamic page.

Tip:

Replace <schema> with the name of the schema in which you created your procedure.

Example 13-8 Code for Dynamic Page to Display Results

<html>
<head>
<title>Example for Search API UI</title>
</head>
<body>
<h2>My Search Form</h2>
<oracle>
declare
x varchar2(100);
y number;
begin
x := :searchterm;
y := :score;
<schemaname>.search_results(x,y);
end;
</oracle>
</body>
</html>

3. Provide default values for the two bind variables defined in the HTML code so that the dynamic page displays some results (Figure 13-1).

Figure 13-1 Providing Default Values for Bind Variables

4. Make sure the dynamic page is available as a portlet.

5. You can now add this dynamic page portlet to any page in your portal.

Tip:

You should find the portlet in the Staging Area of the Portlet Repository under the name of the provider in which you created it.

The dynamic page portlet displays search results based on the default values provided when you created the dynamic page, as shown in Figure 13-2.

Figure 13-2 Default Search Results Displayed in the Dynamic Page Portlet

6. Users can personalize this portlet to provide their own search term and minimum score, as shown in Figure 13-3.

Figure 13-3 Personalizing Search Criteria

In Figure 13-4 you can see the changes in the search results when a user personalizes the portlet and changes the minimum score to 70.

Figure 13-4 Personalized Search Results Displayed in the Dynamic Page Portlet

14 Creating Multi-Lingual Content

This chapter describes how to use the APIs provided with Oracle Portal to create content in different languages. It contains the following sections:

- Section 14.1, "Introduction to Multi-Lingual Support"

- Section 14.2, "Querying the Default Language"

- Section 14.3, "Setting the Session Language"

- Section 14.4, "Modifying an Existing Translation"

- Section 14.5, "Creating a Translation for an Item"

- Section 14.6, "Translations and Item Versioning"

For more information about any of these APIs, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

Tip:

Remember, if you are calling the APIs from a Web provider or external application, you need to set the session context first. For more information, refer to Section 10.1, "Setting the Session Context".

14.1 Introduction to Multi-Lingual Support

The page group administrator must have configured the page group to support multiple languages before you can use the APIs to create translations of portal objects. Before using the APIs, it is recommended that you read Chapter 20 "Translating Portal Content" of the Oracle Fusion Middleware User's Guide for Oracle Portal to understand how to configure a page group and how objects with translations behave.

The basic approach to creating or modifying a translation of a portal object is to set the language context and then use the appropriate content management API to create or modify the item.

14.2 Querying the Default Language

To determine the default language of a page group, run the following query:

select distinct wwnls_api.get_language(default_language) "Page Group Default Language"
from wwsbr_all_content_areas pg
where name = 'MyPageGroup';

To determine the language context of a SQL*Plus session:

- The SQL statement which is used to get the default language should be executed as Portal schema user. To connect to the protal schema, enter the portal schema password and the SERVICE_NAME/SID of the database where the portal repository is installed.

- Run the following query:

select wwctx_api.get_nls_language "Session Context Language Code",
wwnls_api.get_language(wwctx_api.get_nls_language) "Language Description"
from dual;

Note:

When you log in to SQL*Plus and set your user context, you are initially in the language specified by your NLS_LANG environment variable.

14.3 Setting the Session Language

Before creating content in a different language, use the wwctx_api.set_nls_language API to set the session language, as shown in Example 14-1.

Example 14-1 Setting the Session Language (set_nls_language API)

begin
wwctx_api.set_nls_language(
p_nls_language => wwnls_api.GREEK,
p_nls_territory => wwnls_api.TER_GREECE
);
exception
...
end;
/

- p_nls_language is the Globalization Support language abbreviation of the language that you want to set for the session.

- p_nls_territory is the Globalization Support territory abbreviation of the territory that you want to set for the session.

For a list of available language and territory constants, refer to the documentation for the WWNLS_API package in the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

14.4 Modifying an Existing Translation

Modifying an existing translation is simply a matter of setting the language context and using the appropriate API to modify the object. Example 14-2 modifies the text of an existing text item that has a translation in French.

Example 14-2 Modifying a Translation

declare
l_item_master_id number;
begin
-- Set the language context.
wwctx_api.set_nls_language(
p_nls_language => wwnls_api.FRENCH
);
-- Edit the item (this edits the French translation).
l_item_master_id := wwsbr_api.modify_item(
p_master_item_id => 453,
p_item_id        => 454,
p_caid           => 33,
p_folder_id      => 45,
p_display_name   => 'Revue de Film');
p_text           => 'C'est le texte de la revue');
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

For information about the modify_item API used in Example 14-2, refer to Section 11.2.2, "Editing an Item".

14.5 Creating a Translation for an Item

If the session is using a different language from the default language for the page group and translations for the session language are enabled for the page group, the add_item API creates a translation for an item when the item is created. For example, if the default language for the page group is English, the session language is French, and French translations are enabled for the page group, the API adds the following two rows to the item table:

- One with a value of 'us' (English) for the default language.

- One with a value of 'f' (French) for the session language.

Other than the language, both rows will have identical values for all attributes, including the item ID. To avoid this, it is recommended that you always add an item in the default language first before creating any of its translations.

In similar circumstances, the modify_item API updates the translation for the session language (if it exists). If the translation does not exist, as long as translations are enabled for the session language, the API creates a new translation. Therefore, if you want to add a translation for an existing item, use the modify_item (or modify_item_post_upload) API. Example 14-3 creates a file item then changes the language context and adds a translation for the item.

Example 14-3 Creating a Translation

declare
l_item_masterthing_id  number;
l_item_masterthing_id2 number;
l_item_id              number;
begin
-- Set the language context.
wwctx_api.set_nls_language(
p_nls_language => wwnls_api.AMERICAN
);
-- Add an item that resides on the same server as the portal content repository
-- database.
l_item_masterthing_id := wwsbr_api.add_item(
p_caid          => 53,  - A known page group ID.
p_folder_id     => 1,   - A known page ID.
p_display_name  => 'My File',
p_type_id       => wwsbr_api.ITEM_TYPE_FILE,
p_type_caid     => wwsbr_api.SHARED_OBJECTS,
p_region_id     => 513, - A known region on the page.
p_description   => 'Description of my file',
p_file_filename => '/docs_for_upload/English_File.txt'
);
-- Note that if the default language was not American then OracleAS Portal
-- would in addition automatically create a translation of the item in the
-- default language.
--
-- Determine the item id.
select id
into l_item_id
from wwsbr_all_items
where masterid = l_item_masterthing_id
and caid = l_site_id
and language = wwctx_api.get_nls_language
and is_current_version = 1;
-- Change the language context to French.
wwctx_api.set_nls_language(
p_nls_language => wwnls_api.FRENCH
);
-- Modify item adding its translation and any translated attributes.
l_item_masterthing_id2 := wwsbr_api.modify_item(
p_master_item_id => l_item_masterthing_id,
p_item_id        => l_item_id,
p_caid           => l_site_id,
p_folder_id      => l_page_id,
p_display_name   => 'Mon Fichier',
p_description    => 'Description du fichier',
p_file_filename  => '/docs_for_upload/French_File.txt'
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

For information about the add_item API used in Example 14-3, refer to Section 12.4, "Creating Items". For information about the modify_item API, refer to Section 11.2.2, "Editing an Item".

14.6 Translations and Item Versioning

If you attempt to create a new version of an item in a nondefault language, by setting p_addnewversion to TRUE using modify_item API, a new version is not created; a new translation is added instead.

When using versioning in conjunction with translations, we recommend that you create new versions of items in the default language and then translate the new version of the item.

For a more detailed discussion of the effect of item versioning on translations, refer to Section 20.3 "Creating Translatable Content" in the Oracle Fusion Middleware User's Guide for Oracle Portal.

15 Implementing Content Security

This chapter describes how to use the APIs provided with Oracle Portal to ensure that your content is secure. It contains the following sections:

- Section 15.1, "Retrieving Object Privileges"

- Section 15.2, "Setting Page Level Privileges"

- Section 15.3, "Setting Item Level Privileges"

For more information about any of these APIs, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

Tip:

Remember, if you are calling the APIs from a Web provider or external application, you need to set the session context first. For more information, refer to Section 10.1, "Setting the Session Context".

15.1 Retrieving Object Privileges

To retrieve a list of privileges that are currently defined for an object, use the wwsec_api.grantee_list API. Example 15-1 prints the values of the grantee array for a page with an ID of 17623 in page group with an ID of 33. Example 15-2 prints the values of the grantee array for an item with a master ID of 32919 in a page group with an ID of 53.

Example 15-1 Retrieving the List of Privileges for a Page (grantee_list API)

declare
l_grantees         wwsec_api.grantee_array;
l_object_type_name varchar2(5)  := wwsec_api.PAGE_OBJ;
l_name             varchar2(60) := '33/17623';
begin
-- Call the function.
l_grantees := wwsec_api.grantee_list(
p_object_type_name => l_object_type_name,
p_name            => l_name
);
-- Output the results
if l_grantees is not null then
if l_grantees.count > 0 then
for i in l_grantees.first..l_grantees.last loop
if l_grantees.exists(i) then
dbms_output.put_line('GRANTEE_TYPE '||to_char(i)||'=
'||l_grantees(i).GRANTEE_TYPE);
dbms_output.put_line('GRANTEE_ID '||to_char(i)||'=
'||l_grantees(i).GRANTEE_ID);
dbms_output.put_line('GRANTEE_NAME '||to_char(i)||'=
'||l_grantees(i).GRANTEE_NAME);
dbms_output.put_line('PRIVILEGE '||to_char(i)||'=
'||l_grantees(i).PRIVILEGE);
end if;
end loop;
end if;
end if;
exception
...
end;
/

Example 15-2 Retrieving the List of Privileges for an Item

declare
l_grantees         wwsec_api.grantee_array;
p_object_type_name varchar2(5)  := wwsec_api.ITEM_OBJ;
p_name             varchar2(60) := '53/32919';
begin
-- Call the function.
l_grantees := wwsec_api.grantee_list(p_object_type_name, p_name);
-- Output the results.
if l_grantees is not null then
if l_grantees.count > 0 then
for i in l_grantees.first..l_grantees.last loop
if l_grantees.exists(i) then
dbms_output.put.line('GRANTEE_TYPE '||to_char(i)||'= '||l_grantees(i).GRANTEE_TYPE);
dbms_output.put.line('GRANTEE_ID '||to_char(i)||'= '||l_grantees(i).GRANTEE_ID);
dbms_output.put.line('GRANTEE_NAME '||to_char(i)||'= '||l_grantees(i).GRANTEE_NAME);
dbms_output.put.line('PRIVILEGE '||to_char(i)||'= '||l_grantees(i).PRIVILEGE);
end if;
end loop;
end if;
end if;
exception
...
end;
/

The grantee_list API takes the following three parameters:

- p_object_type_name is the type of the object. Use the predefined constants in the WWSEC_API package to specify the value of this parameter, for example wwsec_api.PAGE_OBJ or wwsec_api.ITEM_OBJ.

- p_name is the reference to the object. Use the format '<page group ID>/<object ID>'. So for items, use '<page group ID>/<master item ID>', for example '53/32919'.

- p_owner is the name of the schema that owns the object. For items, do not pass a value to this parameter as it defaults to the portal schema owner.

The API returns an array (WWSEC_API.GRANTEE_ARRAY) with the following columns:

- grantee_type is either USER or GROUP

- grantee_id is the unique ID of the user or group

- grantee_name is the user name or group name

- privilege is the privilege granted to the user or group

15.2 Setting Page Level Privileges

This section shows how to use APIs in the WWSEC_API package to set page level privileges.

Note:

You can also use the APIs listed in the following sections to set tab level access by using the following format for the p_name parameter:

<page group ID>/<tab ID>

You do not need to specify the ID of the container page, as the tab ID is enough to uniquely identify the tab within the page group.

15.2.1 Granting Page Level Privileges

Example 15-3 shows how to use the set_group_acl API to grant privileges to a group. Example 15-4 shows how to use the set_user_acl API to grant privileges to a user.

Example 15-3 Granting Page Privileges to a Group (set_group_acl API)

declare
l_group_id number       := wwsec_api.group_id('MYGROUP');
l_name     varchar2(60) := '33/17623';
BEGIN
wwsec_api.set_group_acl(
p_group_id         => l_group_id,
p_object_type_name => wwsec_api.PAGE_OBJ,
p_name             => l_name,
p_privilege        => wwsec_api.VIEW_PRIV
);
end;
/

Example 15-4 Granting Page Privileges to a User (set_user_acl API)

declare
l_person_id number      := wwsec_api.id('JOHN.SMITH');
l_name     varchar2(60) := '33/17623';
begin
wwsec_api.set_user_acl(
p_person_id        => l_person_id,
p_object_type_name => wwsec_api.PAGE_OBJ,
p_name             => l_name,
p_privilege        => wwsec_api.VIEW_PRIV
);
end;
/

These two APIs take the following parameters:

- p_group_id is the ID of the group to which you want to grant privileges (set_group_acl only)

- p_person_id is the ID of the user to whom you want to grant privileges (set_user_acl only)

- p_object_type_name is type of the object on which you want to grant privileges. Use the predefined constants in the WWSEC_API package to specify the value of this parameter, for example wwsec_api.PAGE_OBJ.

- p_name is the reference to the object. Use the format '<page group ID>/<page ID>', for example '33/17623'.

- p_privilege is the level of privilege you want to grant to the user or group. Use the predefined constants in the WWSEC_API package to specify the value of this parameter, for example wwsec_api.VIEW_PRIV.

15.2.2 Removing Page Level Privileges

At some point, it may become necessary to remove a user or group's privileges from a page. Example 15-5 shows how to use the remove_group_acl API to remove a group's privileges. Example 15-6 shows how to use the remove_user_acl API to remove a user's privileges.

Example 15-5 Removing Page Privileges from a Group (remove_group_acl API)

declare
l_group_id number       := wwsec_api.group_id('MYGROUP');
l_name     varchar2(60) := '33/17623';
BEGIN
wwsec_api.remove_group_acl(
p_object_type_name => wwsec_api.PAGE_OBJ,
p_name             => l_name,
p_group_id        => l_group_id,
p_privilege        => wwsec_api.MANAGE_PRIV
);
end;
/

Example 15-6 Removing Page Privileges from a User (remove_user_acl API)

declare
l_person_id number       := wwsec_api.id('JOHN.SMITH');
l_name     varchar2(60)  := '33/17623';
BEGIN
wwsec_api.remove_user_acl(
p_object_type_name => wwsec_api.GROUP_OBJ,
p_name             => l_name,
p_person_id        => l_person_id,
p_privilege        => wwsec_api.MANAGE_PRIV
);
end;
/

These two APIs take the following parameters:

- p_object_type_name is type of the object from which you want to remove privileges. Use the predefined constants in the WWSEC_API package to specify the value of this parameter, for example wwsec_api.PAGE_OBJ.

- p_name is the reference to the object. Use the format '<page group ID>/<page ID>', for example '33/17623'.

- p_group_id is the ID of the group whose privileges you want to remove (remove_group_acl only). Set this parameter to NULL if you want to remove the specified privilege on this page from all groups.

- p_person_id is the ID of the user whose privileges you want to remove (remove_user_acl only). Set this parameter to NULL if you want to remove the specified privilege on this page from all users.

- p_privilege is the level of privilege you want to remove from the user or group. Use the predefined constants in the WWSEC_API package to specify the value of this parameter, for example wwsec_api.VIEW_PRIV. Set this parameter to NULL if you want to remove all privileges on the page from the user or group.

15.3 Setting Item Level Privileges

If item level security (ILS) is enabled for a page, you can specify access privileges for individual items on the page.

Example 15-7 shows how to use the modify_folder API to enable ILS for a page.

Example 15-7 Enabling Item Level Security for a Page

declare
l_page     wwsbr_api.page_record;
begin
select *
into l_page
from   <schema>.wwsbr_user_pages
where  siteid = 33
and  id = 1
and  rownum = 1;
l_page.haveitemsecurity := 1;
wwsbr_api.modify_folder(
p_page => l_page
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

For information about the modify_folder API and WWSBR_USER_PAGES view used in Example 15-7, refer to Section 11.1, "Editing Page Properties".

Example 15-8 shows how to enable ILS for an individual item (this is the same as selecting Define Item Level Access Privileges in the Oracle Portal user interface):

Example 15-8 Enabling Item Level Security for an Item (enable_ils_for_item API)

begin
wwsbr_api.enable_ils_for_item(
p_master_item_id => 453,
p_caid           => 33,
p_folder_id      => 45
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item. You can find this value in the MASTERID column of the WWSBR_ALL_ITEMS view.

- p_caid is the ID of the page group to which the item belongs.

- p_folder_id is the ID of the page on which the item appears.

Tip:

If you want to edit other attributes for the item as well as the ILS setting, you can use the modify_item or modify_item_post_upload APIs instead. To enable ILS set the p_access_level parameter to wwsbr_api.ITEM_ACCESS, to disable ILS set the parameter to wwsbr_api.FOLDER_ACCESS.

15.3.1 Granting Item Level Privileges

After enabling ILS for the item, you can define access privileges for one or more users or groups.

When setting item level privileges, the type of privileges that are granted is dependent on which of the following parameters are passed rather than the parameter values:

- Pass an array of user IDs to p_itemown_user to grant the Manage privilege to a list of users.

- Pass an array of user IDs to p_itemmanage_user to grant the Edit privilege to a list of users.

- Pass an array of user IDs to p_itemview_user to grant the View privilege to a list of users.

- Pass an array of group IDs to p_itemown_group to grant the Manage privilege to a list of groups.

- Pass an array of group IDs to p_itemmanage_group to grant the Edit privilege to a list of groups.

- Pass an array of group IDs to p_itemview_group to grant the View privilege to a list of groups.

You can pass values to any combination of these parameters in the same procedure call to set a range of privileges across different users and groups.

Example 15-9 shows how you can use the add_item_ils_privileges API to grant item-level privileges to users.

Example 15-9 Granting Item Level Privileges to Users (add_item_ils_privileges API)

declare
l_itemown_username_array wwsbr_type.array;
l_itemown_userid_array   wwsbr_type.array;
begin
l_itemown_username_array(1) := 'jsmith';
l_itemown_username_array(2) := 'janesmith';
l_itemown_username_array(3) := 'joedoe';
for i in 1 .. l_itemown_username_array.count loop
-- Get the user ID from the wwsec_api.id_sso API.
l_itemown_userid_array(i) := wwsec_api.id_sso(
p_username => l_itemown_username_array(i)
);
end loop;
wwsbr_api.add_item_ils_privileges(
p_master_item_id => 453,
p_caid           => 33,
p_folder_id      => 45,
p_itemown_user   => l_itemown_userid_array
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item. You can find this value in the MASTERID column of the WWSBR_ALL_ITEMS view.

- p_caid is the ID of the page group to which the item belongs.

- p_folder_id is the ID of the page on which the item appears.

- p_itemown_user is an array of user IDs to which you want to grant Manage privileges.

If you pass the same user or group in more than one of the privilege arrays, the user or group is granted the highest privilege level specified.

Tip:

You can also update the access privileges for an item using the add_item_ils_privileges API.

15.3.2 Removing Item Level Privileges

If for some reason, you need to remove a user or group's privileges on an item, use the delete_ils_privilege API, as shown in Example 15-10.

Example 15-10 Removing Item Level Privileges (delete_ils_privilege API)

declare
l_user_id       number := 334;
l_page_group_id number := 75;
l_page_id       number := 1;
l_item_id       number := 74637;
begin
wwsbr_api.delete_ils_privilege(
p_user_or_group_id => l_user_id,
p_caid             => l_page_group_id,
p_folder_id        => l_page_id,
p_master_item_id   => l_item_id
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_user_or_group_id is the ID of the user or group for which you want to remove privileges.

- p_caid is the ID of the page group to which the item belongs.

- p_folder_id is the ID of the page on which the item appears.

- p_master_item_id is the master ID of the item. You can find this value in the MASTERID column of the WWSBR_ALL_ITEMS view.

15.3.3 Inheriting Item Level Privileges from the Page

If you decide that an item that has its own privileges defined should, in fact, simply inherit its privileges from the page instead, use the inherit_folder_privileges API to disable ILS (this is the same as selecting Inherit Parent Page Access Privileges in the Oracle Portal user interface). Example 15-11 shows how to use the inherit_folder_privileges API.

Example 15-11 Inheriting Item Privileges from the Parent Page (inherit_folder_privileges API)

begin
wwsbr_api.inherit_folder_privileges(
p_master_item_id => 453,
p_caid           => 33,
p_folder_id      => 45
);
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
...
end;
/

- p_master_item_id is the master ID of the item. You can find this value in the MASTERID column of the WWSBR_ALL_ITEMS view.

- p_caid is the ID of the page group to which the item belongs.

- p_folder_id is the ID of the page on which the item appears.

Tip:

If you want to edit other attributes for the item as well as the ILS setting, you can use the modify_item or modify_item_post_upload APIs instead. To enable ILS set the p_access_level parameter to wwsbr_api.ITEM_ACCESS, to disable ILS set the parameter to wwsbr_api.FOLDER_ACCESS.

16 Using the Content Management Event Framework

This chapter describes the Oracle Portal Content Management Event Framework (CMEF). It contains the following sections:

- Section 16.1, "What Is the Content Management Event Framework?"

- Section 16.2, "How Does the Content Management Event Framework Work?"

- Section 16.3, "Using the Content Management Event Framework"

- Section 16.4, "Installing the Examples"

- Section 16.5, "Example: Portal Object Event Logging"

- Section 16.6, "Example: Item Notification"

- Section 16.7, "Example: Item Validation"

- Section 16.8, "Example: Integrating External Workflow"

16.1 What Is the Content Management Event Framework?

CMEF enables you to extend Oracle Portal's content management functionality by adding programmatic hooks to certain pre-defined portal events. The framework publishes these events to an Oracle database queue. This allows third party programs to subscribe to these events and to use the APIs to extend your portal. In this way, you can use page and item related events within a portal to trigger actions within one or more external applications.

16.2 How Does the Content Management Event Framework Work?

CMEF uses Oracle Streams Advanced Queuing (AQ) technology. Oracle Streams AQ is an Oracle database component that provides a message-queue system with a rich and industry standard feature set. Oracle Streams AQ offers the following features:

- Multiple ways for applications (producers) to place messages in a queue (enqueue).

- Multiple ways for applications (consumers) to get messages from a queue (dequeue).

- A publish/subscribe model that enables the producer application to be independent of the consumer applications.

- Propagation of messages between queues on different machines and databases.

- Guaranteed delivery of messages along with exception handling in case messages cannot be delivered.

- Persistent storage of messages.

- Message prioritization.

- Time properties for messages such as expiration and delays.

For more information, refer to the Oracle Streams Advanced Queuing page on the Oracle Technology Network (OTN):

http://www.oracle.com/technology/products/aq

Actions within a portal (through the Oracle Portal user interface, the Web-based Distributed Authoring and Versioning (WebDAV) protocol, or PL/SQL APIs) trigger CMEF events. These events cause Oracle Portal to publish CMEF messages to a queue. You can create subscribers to consume the messages on the queue and perform actions based on them. For example, you could create a subscriber to verify that when a user adds an item to a portal page, its display name is less than 80 characters. The subscriber may process events as they occur or process them based on some time interval.

There are three major types of CMEF events: ADD, UPDATE, and DELETE. Every content management action falls under one of these events. An event can be in one of several different states. For example, when a user adds an item to a page, the state of the ADD event indicates whether the item is available immediately (PUBLISHED) or at some later date (NOT_PUBLISHED). Refer to Section 16.3, "Using the Content Management Event Framework" to learn more about how subscribers can use this information to retrieve messages of interest to them.

Using the events published by CMEF involves the following five basic queuing operations:

- Enqueuing Messages: Oracle Portal publishes messages (known as enqueuing) to the multiconsumer queue named WWSBR_EVENT_Q. Messages to this queue never expire. For more information, refer to Section 16.2.1, "Enqueuing Messages".

- Dequeuing Messages: Subscribing applications pick up messages (known as dequeuing) from the queue. For more information, refer to Section 16.2.2, "Subscribers and Dequeuing Messages".

- Exception Handling: A message is said to be processed normally if it is consumed within the specified time interval and within the specified number of attempts. Messages not consumed normally are placed in a separate queue called the exception queue. For more information, refer to Section 16.2.3, "Exception Handling".

- Listening for Messages: An application can use LISTEN to wait for messages for multiple subscriptions without having to repeatedly poll the queue. For more information, refer to Section 16.2.4, "Listening for Messages".

- Notifications: This Oracle Streams AQ feature enables users or clients to receive notification of a message of interest. For more information, refer to the Oracle Streams AQ documentation.

You use the DBMS_AQ package to perform queuing operations.

16.2.1 Enqueuing Messages

CMEF enqueues messages to the WWSBR_EVENT_Q queue, specifying AQ message properties that subscriber applications can then use at dequeue time (Table 16-1).

Table 16-1 AQ Message Properties Set by CMEF

Message Property

Type

Value

PRIORITY

BINARY_INTEGER

1

DELAY

BINARY_INTEGER

NO_DELAY

EXPIRATION

BINARY_INTEGER

NEVER

CORRELATION

VARCHAR2(128)

NULL

RECIPIENT_LIST

AQ$_RECIPIENT_LIST_T

NULL

EXCEPTION_QUEUE

VARCHAR2(51)

WWSBR_EVENT_ERR_Q

ORIGINAL_MSGID

RAW(16)

NULL

The WWSBR_EVENT_Q queue is a multiconsumer queue. This enables more than one subscriber to consume a single message, allowing for multiple subscribers without having to make multiple copies of each message. Since all messages in the queue have the same priority, this queue works on a first-in first-out basis.

Each message that CMEF enqueues to the WWSBR_EVENT_Q queue contains a payload that contains information about the portal object to which the event relates, such as page ID or page group ID. Subscribers can use this payload information to perform actions on the portal object. The contents of the CMEF message payload are described in more detail in Section 16.3.6, "CMEF Message Payload".

CMEF enqueues messages for immediate consumption, that is, a message is posted on the WWSBR_EVENT_Q queue as soon as an action occurs in the portal; there is no delay. Messages created by CMEF do not have an expiration time.

16.2.2 Subscribers and Dequeuing Messages

On the consuming end, subscribers have various mechanisms to consume the messages produced by CMEF. Subscribers can process messages as they arrive, and thus must wait for the messages to arrive. Alternatively, subscribers can choose to be notified when the messages arrive. These notifications can be Oracle Call Interface (OCI) callback functions, PL/SQL functions, or even e-mails.

16.2.2.1 Adding a Subscriber to the WWSBR_EVENT_Q Queue

For a subscriber to be able to consume messages produced by CMEF, you need to add it to the WWSBR_EVENT_Q queue using the DBMS_AQADM.ADD_SUBSCRIBER procedure and you need to login as the Portal schema user:

GRANT EXECUTE ON DBMS_AQADM TO <<PORTAL_SCHEMA>>;
GRANT Aq_administrator_role TO <<PORTAL_SCHEMA>>;

Example 16-1 adds the JAY subscriber to the WWSBR_EVENT_Q queue.

Example 16-1 Adding a Subscriber to WWSBR_EVENT_Q

subscriber := sys.aq$_agent('JAY', null, null);
dbms_aqadm.add_subscriber(
queue_name => 'portal.wwsbr_event_q',
subscriber => subscriber
);

Since Oracle Streams AQ supports a maximum of 1024 subscribers for each multiconsumer queue, you can add up to a maximum of 1024 subscribers to the WWSBR_EVENT_Q queue. All consumers that are added as subscribers to this queue must have unique values for the AQ$_AGENT parameter.

You can remove a subscriber using the DBMS_AQADM.REMOVE_SUBSCRIBER procedure.

For an example of a simple subscriber, refer to Section 16.3.1, "Creating Subscriber Code".

16.2.2.2 Subscriber Queue Management

Oracle Enterprise Manager DBA Studio enables you to manage Oracle Streams AQ. You can use DBA Studio to create queue tables, create queues, browse AQ messages, archive or purge AQ messages, add AQ subscribers, and manage propagation. DBA Studio also shows the topology for the propagation of messages between queues at database level and queue level.

The Oracle Diagnostics and Tuning pack supports alerts and monitoring for AQ queues. You can set up alerts for when the number of messages for a particular subscriber exceeds a threshold, or when there is an error in propagation. In addition, you can monitor queues for the number of messages in a ready state or the number of messages for each subscriber, and so on.

You can also manage the subscriber queue using the standard AQ APIs. For more information, refer to your Oracle Enterprise Manager documentation.

16.2.2.3 Dequeuing Messages

The operation of retrieving messages from a queue is known as dequeuing (Figure 16-1).

Figure 16-1 The Dequeuing Process

You use the DBMS_AQ.DEQUEUE procedure for dequeuing messages from the WWSBR_EVENT_Q queue. Example 16-2 illustrates dequeuing for the subscriber JAY.

Example 16-2 Dequeuing Messages

...
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := 'JAY';
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := dbms_aq.BROWSE;
dbms_aq.dequeue(
queue_name         => 'WWSBR_EVENT_Q',
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
...

- NAVIGATION: Use the NAVIGATION parameter of the DBMS_AQ.DEQUEUE operation to determine the sequence in which you want to dequeue the messages. The default NAVIGATION parameter for the dequeue request is NEXT_MESSAGE. This means that the subsequent dequeue operation will retrieve the messages from the queue based on the snapshot obtained in the first dequeue. In particular, a message that is enqueued after the dequeue command will be processed only after processing all the messages already enqueued before in the queue. This is sufficient for messages enqueued for the WWSBR_EVENT_Q queue since it does not have priority-based ordering.

Note:

NEXT_MESSAGE with some delay is the optimal way of processing AQ messages. When the first message in the queue needs to be processed by every dequeue command, subscribers must explicitly use the FIRST_MESSAGE navigation option.

- DEQUEUE_MODE: A dequeue request can either view a message or delete a message. To view a message, the subscriber can use the BROWSE or LOCK modes. To consume a message, the subscriber can use the REMOVE or REMOVE_NODATA modes. If a subscriber browses a message, the message remains available for further processing. Similarly a locked message remains available for further processing after the subscriber releases the lock by performing a transaction commit or rollback. To prevent a viewed message from being dequeued by a concurrent user, you should view the message in locked mode. After a subscriber consumes a message using either of the REMOVE modes, the message is no longer available for dequeue requests.
When a subscriber dequeues a message using REMOVE_NODATA mode, the request does not retrieve the payload of the message. This mode is useful when the user has already examined the message payload, possibly by means of a previous BROWSE dequeue. In this way, you can avoid the overhead of payload retrieval that can be substantial for large payloads.

Note:

One event is enqueued for each subscriber. Thus removing an event from one subscriber's queue does not remove it from the queues of other subscribers.

- CONSUMER_NAME: A subscriber can dequeue a message from the WWSBR_EVENT_Q queue by supplying this queue name:

- In PL/SQL you supply the consumer name using the CONSUMER_NAME field in the DEQUEUE_OPTIONS_T record.

- In OCI you supply the consumer name using the OCISetAttr procedure to specify a text string as the OCI_ATTR_CONSUMER_NAME of an OCI_DTYPE_AQDEQ_OPTIONS descriptor.

- In Visual Basic (OO4O) you supply the consumer name by setting the consumer property of the OraAQ object.

Multiple processes or operating system threads can use the same to dequeue concurrently from a queue. Unless the message ID of a specific message is specified during dequeue, the consumers can dequeue messages that are in the READY state.

Note:

You should not need to use the Search parameters to dequeue CMEF events.

16.2.3 Exception Handling

A message is considered processed when all intended consumers have successfully dequeued the message. If a message cannot be processed for some reason, it moves to an exception queue.

A message is considered expired if one or more consumers does not dequeue it before the expiration time. Expired messages also move to an exception queue. An exception queue is a repository for all expired or unserviceable messages.

Applications cannot directly enqueue into exception queues. Also, an exception queue cannot have subscribers associated with it. However, an application that intends to handle these expired or unserviceable messages must dequeue from the exception queue.

CMEF exceptions are sent to the WWSBR_EVENT_ERR_Q exception queue. Expired messages from the WWSBR_EVENT_Q multiconsumer queue cannot be dequeued by the intended recipients of the message. However, they can be dequeued in REMOVE mode once by specifying a NULL consumer name in the dequeue options. The queue monitor removes expired messages from multiconsumer queues. This allows dequeuers to complete the dequeue operation by not locking the message in the queue table.

Since the queue monitor removes messages that have been processed by all consumers from multiconsumer queues at regular intervals, users may see a delay between when the messages have been completely processed and when they are physically removed from the queue.

Note:

The WWSBR_EVENT_ERR_Q exception queue, like all exception queues, is a single-consumer queue.

16.2.4 Listening for Messages

Oracle Streams AQ can monitor multiple queues for messages with a single LISTEN call. A subscriber can use LISTEN to wait for messages for multiple subscriptions. It can also be used by gateway applications to monitor multiple queues. If the LISTEN call returns successfully, a dequeue must be used to retrieve the message. Without the LISTEN call, an application which sought to dequeue from a set of queues would have to continuously poll the WWSBR_EVENT_Q queue to determine if there is a message.

Alternatively, you could design your subscriber to have a separate dequeue process for each queue. However, if there are long periods with no traffic in any of the queues, including WWSBR_EVENT_Q, these approaches will create unacceptable overhead. The LISTEN call is well suited for such subscribers. When there are messages for multiple agents in the agent list, LISTEN returns with the first agent for whom there is a message.

You can use the LISTEN call to monitor receipt of messages on one or more queues on behalf of a list of agents. The call takes a list of agents as an argument. You specify the queue to be monitored in the address field of each agent listed. You also must specify the name of the agent when monitoring multiconsumer queues. Example 16-3 shows how to use the LISTEN call to listen to messages on multiple queues.

Example 16-3 Listening to Messages on Multiple Queues

declare
agent_w_msg   aq$agent;
qlist         dbms_aq.agent_list_t;
begin
-- MYQ1, MYQ2, MYQ3 are multiconsumer queues in the SCOTT schema.
qlist(1) := aq$agent('agent1', 'scott.MYQ1', null);
qlist(2) := aq$agent(null, 'scott.MYQ2', null);
qlist(3) := aq$agent('agent3', 'scott.MYQ3', null);
-- Listen with a timeout of 100 seconds.
dbms_aq.listen(
agent_list => qlist,
wait       => 100,
agent      => agent_w_msg
);
dbms_output.put_line('MSG in Q: '||agent_w_msg.address||'for '
||agent_w_msg.name);
dbms_output.put_line('');
end;
/

This is a blocking call that returns when there is a message ready for consumption for an agent in the list. If there are messages for more than one agent, only the first agent listed is returned. If there are no messages found when the wait time expires, an error is raised.

A successful return from the call is only an indication that there is a message for one of the listed agents in one of the specified queues. The interested agent should dequeue the relevant message. Example 16-4 illustrates the dequeue process combined with listening. Here, we dequeue the messages for the subscriber, JAY, for a certain time period.

Example 16-4 Listening and Dequeuing Messages

begin
agent_list(1)     := sys.aq$_agent('JAY', 'WWSBR_EVENT_Q', null);
wait_time integer := 100;
loop
-- Wait for order status messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
-- If there are messages for JAY, dequeue them.
if (agent_w_message.name = 'JAY') then
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := 'JAY';
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := dbms_aq.BROWSE;
dbms_aq.dequeue(
queue_name         => 'item_queue',
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
end if;
end loop;
exception
when NO_MESSAGES then
dbms_output.put_line('No more messages for Jay');
end;
/

16.3 Using the Content Management Event Framework

Every portal item and page action generates a CMEF message that is enqueued to the WWSBR_EVENT_Q queue. A subscriber can use the information contained within this message to perform various actions using the Oracle Portal PL/SQL APIs.

There are three basic steps in handling CMEF events, each of which is described and illustrated later in this section. These steps are as follows:

1. Section 16.3.1, "Creating Subscriber Code"

2. Section 16.3.2, "Adding a Subscriber to WWSBR_EVENT_Q"

3. Section 16.3.3, "Enabling CMEF Events at the Page Group Level"

This section also provides a description of the message payload, followed by several examples of common portal actions and the events they generate.

16.3.1 Creating Subscriber Code

Oracle Streams AQ offers a content-based subscription model. Subscriber applications can specify interest based on message content. You should execute CMEF event subscriber code in the Oracle Portal schema. Example 16-5 shows a sample subscriber.

Example 16-5 An Example Subscriber

create or replace <procedure name> as
agent_list         dbms_aq.aq$_agent_list_t;
wait_time          integer       := <time in seconds>;
agent_w_message    sys.aq$_agent;
dequeue_options    dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle     raw(16);
message            <portal schema>.wwsbr_event;
l_subscriber       varchar2(30)  := '<subscriber name>';
l_queue            varchar2(30)  := 'PORTAL.WWSBR_EVENT_Q';
l_mode             binary_integer := dbms_aq.[BROWSE|LOCK|REMOVE|REMOVE_NODATA];
...
<additional parameters>
...
BEGIN
agent_list(1) := sys.aq$_agent(l_subscriber, l_queue, null);
loop
-- Listen for messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
-- If there are messages for the subscriber then dequeue them.
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation    := dbms_aq.[NEXT_MESSAGE|FIRST_MESSAGE];
dequeue_options.dequeue_mode  := l_mode;
-- Dequeue messages.
dbms_aq.dequeue(
queue_name         => l_queue,
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
-- Determine the type of event that occurred and act accordingly.
...
<your code here>
...
end if;
end loop;
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
end;
/

16.3.2 Adding a Subscriber to WWSBR_EVENT_Q

A subscriber subscribes to a queue from where it consumes messages. You have to add a subscriber to the WWSBR_EVENT_Q queue in order to process CMEF event messages, as shown in Example 16-6.

Example 16-6 Adding a Subscriber to WWSBR_EVENT_Q

declare
subscriber sys.aq$_agent;
begin
subscriber := sys.aq$_agent('<subscriber>', null, null);
dbms_aqadm.add_subscriber(
queue_name => '<portal schema>.wwsbr_event_q',
subscriber => subscriber
);
end;
/

16.3.3 Enabling CMEF Events at the Page Group Level

In Oracle Portal, CMEF is enabled or disabled at the page group level. By default, CMEF is enabled when a user creates a page group, and thus, events are triggered whenever changes occur within the Oracle Portal user interface or WebDAV.

To enable or disable CMEF for a page group, perform the following steps:

1. Go to any page of the page group and switch to Edit mode.

2. In the toolbar at the top of the page, click the Properties link next to Page Group.

Note:

Make sure you click the link next to Page Group and not the one next to Page (Figure 16-2).

Figure 16-2 The Page Group Properties Link on the Edit Mode Toolbar

3. Click the Configure tab to bring it forward.

4. In the Content Management Event Framework section you can see whether CMEF is enabled or disabled. If you want to change this setting, click the Edit link (Figure 16-3).

Figure 16-3 Status of CMEF for a Page Group

5. To enable CMEF, select the Enable Content Management Event Framework check box (Figure 16-1). To disable CMEF, clear the check box.

Figure 16-4 Enabling or Disabling CMEF for a Page Group

6. Click OK to save your changes.

7. Click Close to return to the page.

16.3.4 Examining CMEF Events

Use the CMEF Events page (Figure 16-5) to examine the subscribers that have been added to the WWSBR_EVENTS_Q queue.

To access the CMEF Events page, perform the following steps:

1. Login to your portal as the portal schema owner.

2. Enter the following URL in the browser Address field:

http://<host>:<port>/portal/pls/<dad>/<schema>.wwsbr_event_dbg.show

- host is the machine on which your portal middle tier is installed.

- port is the port used by your portal

- dad is the Database Access Descriptor (DAD) for your Oracle Portal installation.

- schema is the schema in which Oracle Portal is installed.

Note:

The CMEF Events page is not supported by Oracle, but it is included within Oracle Portal for debugging purposes. It is only accessible by the portal schema owner.

Figure 16-5 CMEF Events Page

16.3.5 Running a CMEF Subscriber

To run a subscriber, issue the command shown in Example 16-7 at a SQL prompt.

Example 16-7 Running a Subscriber

begin
<subscriber procedure>();
end;
/

16.3.6 CMEF Message Payload

Every Oracle Portal user interface or PL/SQL content management action falls under one of the three main CMEF events: INSERT, UPDATE, DELETE. States provide more meaning to events. For example, the following types of ADD/INSERT ITEM events:

- Add an item and publish it immediately.

- Add an item and publish it at a later date.

- Add an item that requires approval, because the user has Manage Items With Approval privileges.

For a detailed list of the actions and related events and states, refer to Appendix G, "Content Management Event Framework Events".

Each CMEF event has an associated CMEF message payload as shown in Table 16-2.

Table 16-2 CMEF Message Payload Properties

Message Property

Type

Description

ACTION

VARCHAR2(30)

The portal action that triggered the event.

RAW_EVENT

VARCHAR2(30)

The event produced as a result of the portal action.

STATE

VARCHAR2(30)

Provides additional information related to the event.

OBJECT_ID

NUMBER

The ID of the object to which the event relates (for example, item, page, category, and so on).

OBJECT_SITE_ID

NUMBER

The ID of the page group to which the object belongs.

OBJECT_LANGUAGE

VARCHAR2(30)

The session language.

NULL if the action is independent of language.

PAGE_ID

NUMBER

For items, the ID of the page on which the item appears.

NULL for other objects.

PAGE_SITE_ID

NUMBER

For items, the ID of the page group to which the page identified in PAGE_ID belongs.

NULL for non-item related events.

OBJECT_CLASS

VARCHAR2(30)

Records the class of object about which an event has been raised.

EVENTS_USER

VARCHAR2(256)

The name of the user who performed the portal action.

EVENTS_DATE

VARCHAR2(60)

The date on which the event occurred. Format: dd-mon-yyyy HH12:MI PM

ID1 (OVERLOADED)

NUMBER

For items, the item type ID.

For pages, the page type ID.

For item and page types, the base type ID.

SITE_ID1 (OVERLOADED)

NUMBER

For item types, the ID of the page group to which the item type belongs.

For pages, the ID of the page group to which the page type belongs.

For item and page types, the ID of the page group to which the base type belongs.

GROUP_ID

NUMBER

When multiple messages are associated with a particular event, related messages have the same group ID.

OBJECT PATH

VARCHAR2(4000)

A unique path to the portal object being referenced by this message on the queue (this can be NULL). It is used only for pages, items, categories, perspectives, item types, and page types.

OBJECT UID

VARCHAR2(4000)

A unique immutable identifier to the portal object being referenced by this message. It is used only for pages, items, categories, perspectives, item types, and page types.

16.3.7 Oracle Portal Actions and CMEF Events

This section describes some of the most common portal actions and shows how to include code in your subscriber to detect these actions. These actions may occur through the Oracle Portal user interface, the Oracle Portal PL/SQL APIs, or WebDAV.

For a more detailed list of portal actions and the events and message payloads that they generate, refer to Appendix G, "Content Management Event Framework Events".

16.3.7.1 Page and Page Group Actions

In Oracle Portal, a portal is a collection of one or more page groups. A page group is a hierarchical collection of pages for which common attributes and mechanisms can be established.

16.3.7.1.1 Creating a Page

Creating a page produces the following CMEF message payload:

Action

Event

State

Object Class

ADD_PAGE

INSERT

PUBLISHED

PAGE

ADD_ITEM

INSERT

PUBLISHED

ITEM

The first message is for the page itself, and the second is for the portlet instance that displays the default navigation page on the page.

If you want your subscriber to respond to the creation of a page, perform the following check:

if ((message.object_class = 'PAGE') and
(message.raw_event    = wwsbr_event_q_access.EVENT_INSERT) then
. . .
end if;

16.3.7.1.2 Updating the Access Control List of a Page

Changing the ACL of a page so that it does not inherit from that of its page group, then clicking Apply or OK produces the following message payload:

Action

Event

State

Object Class

SPECIFY_PAGE_ACL

UPDATE

GENERAL

PAGE

Now, adding a user to the ACL of a page, then clicking Add produces the following message payload:

Action

Event

State

Object Class

ADD_PAGE_ACL

UPDATE

GENERAL

PAGE

Changing the ACL of a page so that it does not inherit from that of its page group, immediately adding a user or group to the ACL, and then clicking Apply or OK produces the following message payload:

Action

Event

State

Object Class

SPECIFY_AND_ADD_PAGE_ACL

UPDATE

GENERAL

PAGE

Changing the ACL of a page so that it inherits that of the page group then clicking Apply or OK produces the following message payload:

Action

Event

State

Object Class

INHERIT_PAGE_ACL

UPDATE

GENERAL

PAGE

Clicking Apply or OK on the Page Properties page, produces an additional message:

Action

Event

State

Object Class

UPDATE_PAGE_ACL

UPDATE

GENERAL

PAGE

16.3.7.1.3 Updating the Access Control List of a Page Group

Updating the access control list (ACL) of a page group by adding a user or group, or deleting a user or group produces the following message payload:

Action

Event

State

Object Class

ADD_PAGEGROUP_ACL
or

DELETE_PAGE_GROUP_ACL

UPDATE

GENERAL

PAGE_GROUP

UPDATE_PAGE_GROUP_ACL

UPDATE

GENERAL

PAGE_GROUP

If you want your subscriber to respond to general ACL updates on a page group, perform the following check:

if ((message.action       = 'UPDATE_PAGE_GROUP_ACL') and
(message.object_class = 'PAGE_GROUP') and
(message.raw.event    = wwsbr_event_q_access.EVENT_UPDATE)) then
. . .
end if;

However, if you are more interested in filtering for actual update and delete events on the page group's ACL, then your subscriber should perform the following checks:

if ((message.object_class = 'PAGE_GROUP') and
(message.raw_event    = wwsbr_event_q_access.EVENT_UPDATE)) then
if (message.action = 'ADD_PAGE_GROUP_ACL') then
. . .
end if;
if (message.action = 'DELETE_PAGE_GROUP_ACL') then
. . .
end if;
. . .
end if;

Note:

The ADD_PAGE_GROUP_ACL and DELETE_PAGE_GROUP_ACL events are triggered when the user clicks Add for each user that is added to/deleted from the ACL. The UPDATE_PAGE_GROUP_ACL is generated when the user clicks Apply or OK.

16.3.7.1.4 Deleting a Page

Deleting a page produces the following message payload:

Action

Event

State

Object Class

DELETE_PAGE

DELETE

PURGED

PAGE

Note:

Events are not generated for the sub-pages or items that are on the page.

16.3.7.2 Item Actions

Items are one of the basic components of a portal page. Items in a portal are based on item types. An action on an item triggers a CMEF event irrespective of the item type.

For example, an ADD_ITEM action occurs whenever a user adds an item of a base, extended, or custom item type. This ensures that there is consistent CMEF messaging behavior when an item action occurs.

16.3.7.2.1 Creating an Item and Publishing it at the Same Time

If a user has Manage privileges, creating an item of any type on a page produces the following message payload:

Action

Event

State

Object Class

ADD_ITEM

INSERT

PUBLISHED

ITEM

If you want you subscriber to respond to this action, perform the following check:

if ((message.action       = 'ADD_ITEM') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'PUBLISHED')) then
. . .
end if;

16.3.7.2.2 Adding an Item That Requires Approval

If approvals and notifications are enabled for a page (or page group), and a user with Manage Items With Approval privileges, adding an item to a page produces the following message payload:

Action

Event

State

Object Class

SUBMIT_ITEM_FOR_APPROVAL

INSERT

NOT_PUBLISHED

ITEM

If you want your subscriber to respond to this action, perform the following check:

if ((message.action       = 'SUBMIT_ITEM_FOR_APPROVAL') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'NOT_PUBLISHED')) then
. . .
end if;

16.3.7.2.3 Approving an Item

Approving an item triggers either an INSERT or UPDATE event, which may also be followed by either a DELETE or UPDATE event depending upon whether or not versioning is enabled.

Item approved; versioning disabled

This is the simplest case. If the item still has approval steps to pass through, then an UPDATE event is triggered:

Action

Event

State

Object Class

APPROVE_ITEM_STEP

UPDATE

GENERAL

ITEM

If the item has completed all approval steps, then an INSERT event is triggered:

Action

Event

State

Object Class

APPROVE_ITEM

INSERT

PUBLISHED

ITEM

Item approved; versioning enabled; current version overwritten

If item versioning is set to Simple at the page or page group level, and a user selects Overwrite Current Version when editing an item, on approval of the item, two events are generated. The first event is for the item that is approved, and a second DELETE event for the item that is overwritten as a result of the item being approved:

Action

Event

State

Object Class

APPROVE_ITEM

INSERT

PUBLISHED

ITEM

APPROVE_ITEM

DELETE

PURGED

ITEM

Item approved; versioning enabled; new and current version

If item versioning is set to Audit at the page or page group level, or it is set to Simple and a user selects Add Item As New And Current Version, on approval of the item an INSERT event is generated. An UPDATE event is also generated that is related to marking the previous version of the item as UNPUBLISHED:

Action

Event

State

Object Class

APPROVE_ITEM

INSERT

PUBLISHED

ITEM

APPROVE_ITEM

UPDATE

UNPUBLISHED

ITEM

If you are writing a subscriber that sends a notification when an item is approved or has passed through a stage of being approved, you should perform the following check:

-- If an item is approved.
if ((message.action       = 'APPROVE_ITEM') and
(message.object.class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'PUBLISHED')) then
. . .
-- If an item has passed an approval step.
elsif ((message.action       = 'APPROVE_ITEM_STEP') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'UPDATE') and
(message.state        = 'PUBLISHED')) then
. . .
end if;

Item approved, versioning enabled; new but not current version

An INSERT event occurs for the item that is added, but the state of the item is marked as NOT_PUBLISHED to indicate that it is not published as the current version:

Action

Event

State

Object Class

APPROVE_ITEM

INSERT

NOT_PUBLISHED

ITEM

16.3.7.2.4 Applying a Category or Perspective to an Item

Applying a different category or perspective to an item produces the same message payload as editing an item:

Action

Event

State

Object Class

EDIT_ITEM

UPDATE

GENERAL

ITEM

Note:

No specific event is generated when the category or perspectives applied to an item are changed, and no additional information is provided.

If you want your subscriber to respond to this action, perform the following check:

if ((message.action       = 'EDIT_ITEM') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'UPDATE') and
(message.state        = 'GENERAL') then
. . .
end if;

16.3.7.2.5 Deleting an Item

Deleting an item from a page group that retains deleted items (that is, items are marked for deletion, but not actually deleted) produces the following message payload:

Action

Event

State

Object Class

DELETE_ITEM

DELETE

MARKED_FOR_DELETE

ITEM

Deleting an item from a page group that does not retain deleted items (that is, deleted items are immediately and permanently removed) produces the following message payload:

Action

Event

State

Object Class

DELETE_ITEM

DELETE

PURGED

ITEM

Your subscriber can use the state value within the message payload to determine what type of delete action occurred:

if ((message.action       = 'DELETE_ITEM') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'DELETE')) then
. . .
-- If item is in a page group that does not actually delete items.
if (message.state = 'MARKED_FOR_DELETE') then
. . .
-- If item is in a page group that actually deletes items.
elsif (message.state = 'PURGED') then
. . .
end if;
end if;

16.4 Installing the Examples

If you would like to deploy and use the examples within the next few sections, we recommend that you create them in a separate schema, called CMEFSAMPLES. To create this schema, use the following steps:

1. Create the database schema CMEFSAMPLES. You need to do this as the SYS user, since you need to grant permissions packages to which only SYS has access. This database schema must be in the same database as that in which the Oracle Portal repository resides. For example:

@connect "/ as sysdba"
drop user cmefsamples cascade;
create user cmefsamples identified by oracle1
default tablespace users temporary tablespace temp;
grant connect, resource to cmefsamples;

2. As the SYS schema, grant the following privileges to CMEFSAMPLES:

@connect "/ as sysdba"
grant create table                  to cmefsamples;
grant create sequence               to cmefsamples;
grant create view                   to cmefsamples;
grant create procedure              to cmefsamples;
grant create trigger                to cmefsamples;
grant create indextype              to cmefsamples;

grant create synonym                to cmefsamples;
grant create public synonym         to cmefsamples;

grant create database link          to cmefsamples;
grant create public database link   to cmefsamples;
grant execute on dbms_utility       to cmefsamples;
grant aq_administrator_role         to cmefsamples;
grant aq_user_role                  to cmefsamples;
grant execute  on dbms_aqadm        to cmefsamples;
grant execute  on dbms_aq           to cmefsamples;
grant execute  on aq$_agent         to cmefsamples;
grant execute  on dbms_job          to cmefsamples;

execute dbms_aqadm.grant_type_access('cmefsamples');
execute dbms_aqadm.grant_system_privilege('ENQUEUE_ANY','cmefsamples',FALSE);
execute dbms_aqadm.grant_system_privilege('DEQUEUE_ANY','cmefsamples',FALSE);
execute dbms_aqadm.grant_system_privilege('MANAGE_ANY', 'cmefsamples', FALSE);
EXECUTE DBMS_AQADM.GRANT_QUEUE_PRIVILEGE('ENQUEUE','portal.WWSBR_EVENT_Q','cmefsamples', FALSE);
EXECUTE DBMS_AQADM.GRANT_QUEUE_PRIVILEGE('DEQUEUE','portal.WWSBR_EVENT_Q','cmefsamples', FALSE);

3. Grant the CMEFSAMPLES schema the permission to call the Oracle Portal PL/SQL APIs. For information about how to do this, refer to Section 9.3, "Providing Access to the APIs and Secure Views".

4. Log in to the portal schema and grant permissions on the following:

EXECUTE DBMS_AQADM.GRANT_QUEUE_PRIVILEGE('DEQUEUE','WWSBR_EVENT_Q','cmefsamples', FALSE);
grant execute on wwsbr_event_q_access to cmefsamples;
grant execute on wwpob_page_util to cmefsamples;
grant select on wwsbr_all_folders to cmefsamples;
grant execute on wwsbr_thing_types to cmefsamples;
grant execute on wwv_thingdb to cmefsamples;
grant execute on wwsbr_event to cmefsamples;

5. Log in to the CMEFSAMPLES schema and run the following:

sqlplus cmefsamples/<password>
create synonym aq$_agent for sys.aq$_agent;

You can download the code for the following examples from OTN:

http://www.oracle.com/technology/products/ias/portal/files/cm_overview_10g1014_cmef_samples.zip

16.5 Example: Portal Object Event Logging

The LOG_PORTAL_EVENT subscriber in Example 16-9 listens to CMEF events and then writes them to a log database table called CMEF_LOG_TABLE (Example 16-8).

Example 16-8 The CMEF_LOG_TABLE

create table cmef_log_table(
action          varchar2(30),
event           varchar2(30),
state           varchar2(30),
object_type     varchar2(30),
object_id       number,
object_site_id  number,
object_language varchar2(30),
page_id         number,
page_site_id    number,
performed_by    varchar2(30)
)

Example 16-9 The LOG_PORTAL_EVENT Subscriber

create or replace procedure log_portal_event as
agent_list         dbms_aq.aq$_agent_list_t;
wait_time          integer        := 5;
agent_w_message    sys.aq$_agent;
dequeue_options    dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle     raw(16);
message            portal.wwsbr_event;
l_subscriber       varchar2(30)   := 'CMEF_LOG_PORTAL_EVENT';
l_queue            varchar2(30)   := 'PORTAL.WWSBR_EVENT_Q';
l_mode             binary_integer := dbms_aq.REMOVE;
begin
agent_list(1) := sys.aq$_agent(l_subscriber, l_queue, null);
loop
-- Wait for messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := l_mode;
dbms_aq.dequeue(
queue_name         => l_queue,
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
insert into cmef_log_table values(
message.action,
message.raw_event,
message.state,
message.object_class,
message.object_id,
message.object_site_id,
message.object_language,
message.page_id,
message.page_site_id,
message.events_user
);
commit;
end if;
end loop;
end;
/

The LOG_PORTAL_EVENT subscriber continuously listens for events on the WWSBR_EVENT_Q queue until the wait time of 5 seconds (as specified in the wait_time variable) is reached. It then dequeues CMEF events in REMOVE mode and then inserts the message payload values into the log table.

You could use the code in Example 16-9 to build an HTML page that displays the results of the log table. For example, the table in Figure 16-6 shows the CMEF message payload for an edit item action:

Figure 16-6 HTML Table Displaying CMEF Message Payload Values

The properties of the CMEF message payload (for example, message.raw_event) are described in Section 16.3.6, "CMEF Message Payload".

If you want the LOG_PORTAL_EVENT subscriber to continually remove messages off the WWSBR_EVENT_Q queue, then you need to remove the following from Example 16-9:

dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := l_mode;
END IF;

Example 16-10 shows how to add the LOG_PORTAL_EVENT subscriber created in the previous section to the WWSBR_EVENT_Q queue.

Example 16-10 Adding the LOG_PORTAL_EVENT Subscriber to WWSBR_EVENT_Q

declare
subscriber sys.aq$_agent;
begin
subscriber := sys.aq$_agent('CMEF_LOG_PORTAL_EVENT', null, null);
dbms_aqadm.add_subscriber(
queue_name => 'portal.wwsbr_event_q',
subscriber => subscriber
);
end;
/

To run the LOG_PORTAL_EVENT subscriber, issue the command shown in Example 16-11.

Example 16-11 Running the LOG_PORTAL_EVENT CMEF Subscriber

begin
log_portal_event();
end;
/

16.6 Example: Item Notification

The item_notify subscriber in Example 16-12 sends an e-mail notification whenever a user adds, updates, or deletes an item on a specified page:

Example 16-12 The CMEF_ITEM_NOTIFY Subscriber

create or replace procedure item_notify as
MIME_TYPE_TEXT      constant varchar(30)  := 'text/plain';
CUSTOM_ATTRIBUTE_ID constant number := 1020;
ADDED               constant varchar2(20) := 'added';
UPDATED             constant varchar2(20) := 'updated';
DELETED             constant varchar2(20) := 'deleted';
ITEM                constant varchar2(10) := 'ITEM';
agent_list          dbms_aq.aq$_agent_list_t;
wait_time           integer               := 5;
begin_time          pls_integer;
end_time            pls_integer;
agent_w_message     sys.aq$_agent;
dequeue_options     dbms_aq.dequeue_options_t;
message_properties  dbms_aq.message_properties_t;
message_handle      raw(16);
message             portal.wwsbr_event;
l_subscriber        varchar2(30)          := 'CMEF_ITEM_NOTIFY';
l_queue             varchar2(30)          := 'PORTAL.WWSBR_EVENT_Q';
l_page_id           number                := 33; -- Page ID of page.
l_mode              binary_integer        := dbms_aq.REMOVE;
l_rec               varchar2(256);
l_body              varchar2(4000)        := null;
l_from_user         varchar2(30)          := '<from-email-address>';
l_to_user           varchar2(30)          := '<to-email-address>';
l_event             varchar2(30)          := '';
l_portal_user_name  varchar2(30)          := 'portal';
l_portal_password   varchar2(30)          := '<portal password>';
l_display_name      varchar2(256)         := '';

begin
begin_time :=  dbms_utility.get_time;
agent_list(1) := sys.aq$_agent(l_subscriber, l_queue, null);
loop
-- Wait for messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait          := DBMS_AQ.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := l_mode;
dbms_aq.dequeue(
queue_name         => l_queue,
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
if ((message.object_class = ITEM)) then
-- Determine the type of event that occurred.
if (message.raw_event = portal.wwsbr_event_q_access.EVENT_INSERT) then
l_event  := ADDED;
elsif (message.raw_event = portal.wwsbr_event_q_access.EVENT_UPDATE) then
l_event  := UPDATED;
elsif (message.raw_event = portal.wwsbr_event_q_access.EVENT_DELETE) then
l_event  := DELETED;
end if;
if ((l_event = ADDED) or
(l_event = UPDATED) or
(l_event = DELETED)) then
-- Set the Portal Context.
portal.wwctx_api.set_context(l_portal_user_name, l_portal_password);

begin
-- Get the Item Display name from the all items view.
select display_name
into l_display_name
from portal.wwsbr_all_items
where id=message.object_id
and caid=message.object_site_id;
exception
when NO_DATA_FOUND then
dbms_output.put_line(sqlerrm);
exit;
end;

-- Only send an e-mail if the item has a display name.
if (l_display_name is not null) then
-- Construct the body of the message.
l_body := l_body || '<br>An item titled '
|| CSBR_UTIL.file_viewer_hyperlink(
message.object_id, message.page_site_id, l_display_name)
|| ' was '
|| l_event || ' on '
|| to_char(message.events_date,'dd-mon-yyyy hh12:mi pm')
|| ' by ' || message.events_user || '. ';
-- Send the message.
html_email(
p_from => l_from_user,
p_to => l_to_user,
p_subject => 'Item ' || l_event || ' Notification',
p_text => 'Text',
p_html => l_body
);
end if;
end if;
end if;
end if;
end_time :=  dbms_utility.get_time;
if (end_time - begin_time) > 3000 then
exit;
end if;
end loop;
end;
/

The ITEM_NOTIFY CMEF subscriber removes the actual events from the queue so that multiple e-mails are not sent to the user.

Note:

For descriptions of the file_viewer_hyperlink function, which gets the URL of the item, and the html_email procedure, which handles the actual sending of the message, refer to "Additional Code".

For further information on the performance and timing of AQ events, refer to the Streams Advanced Queuing page on OTN:

http://www.oracle.com/technology/products/aq

For an example of how to add a subscriber to the WWSBR_EVENT_Q queue, refer to Example 16-10.

For an example of how to run a subscriber, refer to Example 16-11.

The ITEM_NOTIFY CMEF subscriber runs for 3 seconds. This ensures that the subscriber does not continuously run and consume system resources. Alternatively, you could modify the wait_time value used in the subscriber to a higher value, say 60 seconds, so that the subscriber listens for new events every minute. You could also use a DBMS_JOB to have the subscriber run at a specified interval, for example, 30 minutes, as shown in Example 16-13.

Example 16-13 Using DMBS_JOB

declare
v_job number;
begin
dbms_job.submit(
job      => v_job,
what     => 'item_notify()',
interval => 'SYSDATE + (30/(24*60))'
);
end;
/

Additional Code

Example 16-14 shows the CSBR_UTIL package.

Example 16-14 CSBR_UTIL Package

create or replace package CSBR_UTIL as
function file_viewer_hyperlink(
p_item_id in number,
p_caid    in number,
p_text    in varchar2) return varchar2;
end;

create or replace package body CSBR_UTIL as

function file_viewer_url(
p_item_id in number,
p_caid    in number) return varchar2 is

l_return      varchar2(10000);
l_item_name   varchar2(100);
l_folder_id   number;
l_folder_name varchar2(100);
l_portal_url  varchar2(1000);
begin
select name, folder_id
into l_return, l_folder_id
from portal.wwsbr_all_items
where id   = p_item_id
and caid   = p_caid
and active = 1;
begin
while 1=1 loop
select parent_id, name
into l_folder_id, l_folder_name
from portal.wwsbr_all_folders
where id = l_folder_id
and caid = p_caid;
l_return := l_folder_name||'/'||l_return;
end loop;
exception
when NO_DATA_FOUND then
null; -- Exit loop at no rows found, this is expected.
END;
-- Set the Portal URL.
l_portal_url := 'http://<host>:<port>/portal/page/<dad>/';
return l_portal_url||l_return;
exception
when OTHERS then
dbms_output.put_line(sqlerrm);
return 'Error';
end file_viewer_url;

function file_viewer_hyperlink(
p_item_id in number,
p_caid    in number,
p_text    in varchar2) return varchar2 is
begin
return ('<a href="'||file_viewer_url(
p_item_id => p_item_id,
p_caid    => p_caid)||'">'||p_text||'</a>');
end file_viewer_hyperlink;

end;
/

Example 16-15 shows the html_email procedure.

Note:

For this procedure to work you will need to deploy the Oracle Database Sendmail package on your database.

Example 16-15 The HTML E-mail Procedure

create or replace procedure html_email(
p_to      in varchar2,
p_from    in varchar2 default '',
p_subject in varchar2,
p_text    in varchar2 default null,
p_html    in varchar2 default null
)
is
l_boundary   varchar2(255) default 'a1b2c3d4e3f2g1';
l_connection utl_smtp.connection;
l_body_html  clob := empty_clob; -- This LOB will be the e-mail message.
l_offset     number;
l_ammount    number;
l_temp       varchar2(32767) default null;
begin
l_connection := utl_smtp.open_connection('<Mail Server here>');
utl_smtp.helo( l_connection, '<Mail Server here>' );
utl_smtp.mail( l_connection, p_from );
utl_smtp.rcpt( l_connection, p_to );
l_temp := l_temp || 'MIME-Version: 1.0' || chr(13) || chr(10);
l_temp := l_temp || 'To: ' || p_to || chr(13) || chr(10);
l_temp := l_temp || 'From: ' || p_from || chr(13) || chr(10);
l_temp := l_temp || 'Subject: ' || p_subject || chr(13) || chr(10);
l_temp := l_temp || 'Reply-To: ' || p_from || chr(13) || chr(10);
l_temp := l_temp || 'Content-Type: multipart/alternative; boundary=' || chr(34) || l_boundary || chr(34) || chr(13) || chr(10);
------------------------------------------------------------------------------
-- Write the headers.
dbms_lob.createtemporary( l_body_html, false, 10 );
dbms_lob.write(l_body_html, length(l_temp), 1,l_temp);

-------------------------------------------------------------------------------
-- Write the text boundary.
l_offset := dbms_lob.getlength(l_body_html) + 1;
l_temp   := '--' || l_boundary || chr(13) || chr(10);
l_temp   := l_temp || 'content-type: text/plain; charset=us-ascii' || chr(13) || chr(10) || chr(13) || chr(10);
dbms_lob.write(l_body_html, length(l_temp), l_offset, l_temp);

------------------------------------------------------------------------------
-- Write the plain text portion of the e-mail.
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html, length(p_text), l_offset, p_text);

------------------------------------------------------------------------------
-- Write the HTML boundary.
l_temp := chr(13) || chr(10) || chr(13) || chr(10) || '--' || l_boundary || chr(13) || chr(10);
l_temp := l_temp || 'content-type: text/html;' || chr(13) || chr(10) || chr(13) || chr(10);
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html, length(l_temp), l_offset, l_temp);

------------------------------------------------------------------------------
-- Write the HTML portion of the message.
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html, length(p_html), l_offset, p_html);

------------------------------------------------------------------------------
-- Write the final HTML boundary.
l_temp := chr(13) || chr(10) || '--' || l_boundary || '--' || chr(13);
l_offset := dbms_lob.getlength(l_body_html) + 1;
dbms_lob.write(l_body_html, length(l_temp), l_offset, l_temp);

------------------------------------------------------------------------------
-- Send the e-mail in 1900 byte chunks to UTL_SMTP.
l_offset := 1;
l_ammount := 1900;
utl_smtp.open_data(l_connection);
while l_offset < dbms_lob.getlength(l_body_html) loop
utl_smtp.write_data(l_connection, dbms_lob.substr(l_body_html,l_ammount,l_offset));
l_offset := l_offset + l_ammount;
l_ammount := least(1900, dbms_lob.getlength(l_body_html) - l_ammount);
end loop;
utl_smtp.close_data(l_connection);
utl_smtp.quit( l_connection );
dbms_lob.freetemporary(l_body_html);
end;
/

16.7 Example: Item Validation

The item_valication CMEF subscriber in Example 16-16 validates that a URL item added to a specified portal page includes a URL. If the item includes a URL, then the item is approved using the wwsbr_api.approve API. Otherwise the item is rejected using the wwsbr_api.reject API.

Example 16-16 The ITEM_VALIDATION CMEF Subscriber

create or replace procedure item_validation as
MIME_TYPE_TEXT      constant varchar2(30) := 'text/plain';
agent_list          dbms_aq.aq$_agent_list_t;
wait_time           integer               := 5;
begin_time          pls_integer;
end_time            pls_integer;
agent_w_message     sys.aq$_agent;
dequeue_options     dbms_aq.dequeue_options_t;
message_properties  dbms_aq.message_properties_t;
message_handle      raw(16);
message             portal.wwsbr_event;
l_subscriber        varchar2(30)          := 'CMEF_ITEM_VALIDATION';
l_queue             varchar2(30)          := 'PORTAL.WWSBR_EVENT_Q';
l_mode              binary_integer        := dbms_aq.REMOVE;
l_attribute_site_id number                := 0;
l_event             varchar2(30);
l_doc               wwdoc_api.document_record;
l_desc              varchar2(4000);
l_portal_user_name  varchar2(30)          := 'portal';
l_portal_password   varchar2(30)          := ' <portal password>';
l_itemtype          varchar2(30)          := '';
l_url               varchar2(4000)        := '';
begin
begin_time :=  dbms_utility.get_time;
agent_list(1) := sys.aq$_agent(l_subscriber, l_queue, null);
loop
-- Wait for messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait := DBMS_AQ.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode := l_mode;
dbms_aq.dequeue(
queue_name         => l_queue,
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
-- If the event is an ITEM INSERT event and marked for later publication.
if ((message.action       = 'SUBMIT_ITEM_FOR_APPROVAL') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'NOT_PUBLISHED')) then

-- Set the Portal Context.
portal.wwctx_api.set_context(l_portal_user_name, l_portal_password);
-- Get the Object Information.
begin
select itemtype, url
into l_itemtype, l_url
from portal.wwsbr_all_items
where id=message.object_id
and caid=message.object_site_id;
exception
when NO_DATA_FOUND then
dbms_output.put_line(sqlerrm);
exit;
end;
-- If the item type is a URL and no URL is specified.
if (l_itemtype = portal.wwsbr_thing_types.BASE_ITEM_TYPE_URL) and
(l_url is null) then
begin
-- Update item to indicate that a URL needs to be specified.
l_desc := '<font color=RED>NO URL SPECIFIED</font>';
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
wwsbr_api.set_attribute(
p_site_id           => message.object_site_id,
p_thing_id          => message.object_id,
p_attribute_site_id => l_attribute_site_id,
p_attribute_id      => wwsbr_api.ATTRIBUTE_DESCRIPTION,
p_attribute_value   => l_desc
p_log_cmef_message  => FALSE
);
-- Reject the item.
wwsbr_api.reject(
p_item_id => message.object_id,
p_site_id => message.object_site_id,
p_comment => 'Rejected'
);
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
exception
when OTHERS then
dbms_output.put_line(sqlerrm);
end;
else
-- Approve the item.
begin
wwsbr_api.approve(
p_item_id => message.object_id,
p_site_id => message.object_site_id,
p_comment => 'Approved'
);
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
exception
when OTHERS then
dbms_output.put_line(sqlerrm);
end;
end if;
commit;
end if;
end if;
end_time :=  dbms_utility.get_time;
if (end_time - begin_time) > 3000 then
exit;
end if;
end loop;
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
end;
/

The following check in the item_validation CMEF subscriber determines whether the item requires approval:

-- If the event is an ITEM INSERT event and marked for later publication.
if ((message.action       = 'SUBMIT_ITEM_FOR_APPROVAL') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'NOT_PUBLISHED')) then
. . .
end if;

The item_validation CMEF subscriber uses the wwsbr_api.set_attribute API to set the item description to indicate that the user did not specify a URL. The subscriber also chooses not to log CMEF messages when calling this API (p_log_cmef_messages = FALSE).

-- Update item to indicate that a URL needs to be specified.
l_desc := '<font color=RED>No FILE NAME SPECIFIED</font>';
wwsbr_api.set_attribute(
p_site_id           => l_thing.siteid,
p_thing_id          => l_thing.id,
p_attribute_site_id => l_attribute_site_id,
p_attribute_id      => wwsbr_api.ATTRIBUTE_DESCRIPTION,
p_attribute_value   => l_desc
p_log_cmef_message  => FALSE
);

Approving or rejecting an item with the approve or reject APIs triggers an event just the same as if the item were approved or rejected through the Oracle Portal UI. For example, calling the wwsbr_api.approve API triggers an INSERT event with an action of APPROVE_ITEM.

wwsbr_api.approve(
p_item_id => l_thing.id,
p_site_id => l_thing.siteid,
p_comment => 'Approved'
);

For an example of how to add a subscriber to the WWSBR_EVENT_Q queue, refer to Example 16-10.

For an example of how to run a subscriber, refer to Example 16-11.

16.8 Example: Integrating External Workflow

Organizations often find that they want to integrate their business processes into their enterprise portal. Using the capabilities of Oracle Workflow, you can implement portals to route information of any type according to the compliance rules defined for your organization. With CMEF, you can integrate both traditional, applications-based workflow and e-business integration workflow with your Oracle Portal content management system.

This section provides an example of how to integrate external workflow with the Oracle Portal content management system.

16.8.1 Integrating Workflow with Oracle Portal

Oracle Workflow is a component of Oracle Application Server and Oracle E-Business Suite that enables you to design internal business processes and store them in a central repository. You can use Oracle Workflow to support a wide variety of compliance mandates, designing processes that are both auditable and repeatable, and enforce pre-set approvals and limits. Oracle's newest compliance solution, Oracle Internal Controls Manager (Oracle ICM) works in conjunction with Oracle Workflow to monitor internal business processes and ensure they are performed as designed.

In general, there are five steps involved in integrating Oracle Workflow with the Oracle Portal content management system for content approval, and these steps are as follows:

1. Enable approvals and notifications in Oracle Portal.

2. Grant users the Manage Items With Approval privileges.

3. Create a portal user that will be used by the Oracle Workflow process to either approve or reject items and add that user to the portal approval process.

4. Register the workflow process with Oracle Workflow. This workflow process calls your compliance process, or it may perform your actual compliance process.

5. Create subscriber code and add the subscriber to WWSBR_EVENT_Q to process CMEF events. This subscriber initializes the workflow engine and then calls the workflow process.

We can see how this works by modifying the item validation example described in Section 16.7, "Example: Item Validation" to call a workflow process to perform the item validation.

Let's take a look at how this process would work, based on the diagram in Figure 16-7.

Figure 16-7 Process Flow for Workflow Integration with Oracle Portal

16.8.2 Example Overview

Figure 16-7 shows the process flow diagram for using CMEF to integrate Oracle Workflow with the Oracle Portal content management system. When a user with Manage Items With Approval privileges adds an item to the portal, that item is marked as pending. Just as with the ITEM_VALIDATION subscriber in Example 16-16, an Oracle Streams Advanced Queuing subscriber is required to listen for events on the WWSBR_EVENT_Q queue (see Example 16-17). If the event is of type SUBMIT_ITEM_FOR_APPROVAL, the subscriber launches the workflow engine process, WF_CHECKURL, and passes the parameters for the portal item to the workflow process. The workflow process calls an external PL/SQL procedure (see Example 16-18) to perform its business logic, which in this case includes either approving or rejecting the portal item.

If the user specifies a URL, then Oracle Workflow approves the item using the wwsbr_api.approve API. Otherwise, Oracle Workflow rejects the item using the wwsbr_api.reject API.

This example assumes the following prerequisites:

- The CMEFSAMPLES schema exists in the same database as the portal schema.

- The Oracle OWF_MGR workflow schema is installed in the same database as the portal schema.

- The AQ_TM_PROCESSES parameter should be set to at least five. To check this, log in to the database as the SYS user and execute the following query:

select value
from   v$parameter
where  name = 'aq_tm_processes';

If the value is less than five, then set the value as follows:

alter system set aq_tm_processes=5;

- Restart your database.

- Oracle Portal 11g has been installed.

16.8.3 Detailed Example Description

When a portal user with Manage Items With Approval privileges adds an item to a page, a SUBMIT_ITEM_FOR_APPROVAL event is added to the WWSBR_EVENT_Q queue. The item is marked as pending on the portal page. This user's items must be approved before they are made visible on the page.

The Streams Advanced Queuing subscriber CMEF_WORKFLOW listens for events on WWSBR_EVENT_Q. If the event is of type SUBMIT_ITEM_FOR_APPROVAL, then it launches the workflow engine process and passes the parameters for the portal item to the workflow process.

The workflow process WF_CHECKURL performs its business logic, which in this case includes either approving or rejecting portal items.WF_ CHECKURL uses the views and APIs to approve or reject the item. If it approves the item, then an APPROVE_ITEM event is added to WWSBR_EVENT_Q. If it rejects the item, then a REJECT_ITEM event is added to WWSBR_EVENT_Q.

When the user refreshes the page, he or she will either see the item published on the page (if it was approved), or removed (if it was rejected).

The following six steps occur within this example:

1. Section 16.8.3.1, "Enable Approvals and Notifications in Oracle Portal"

2. Section 16.8.3.2, "Grant Users the Manage Items With Approval Privileges"

3. Section 16.8.3.3, "Run Scripts Required for the CMEF Workflow Integration Example"

4. Section 16.8.3.4, "Create Subscriber and Check Procedures"

5. Section 16.8.3.5, "Register the WF_CHECKURL Process with Oracle Workflow"

6. Section 16.8.3.6, "Add the CMEF_WORKFLOW Subscriber to the WWSBR_EVENT_Q Queue"

Each of these steps is described in more detail in the following sections.

16.8.3.1 Enable Approvals and Notifications in Oracle Portal

The first thing you need to do is enable approvals and notifications in the page group.

To enable approvals and notifications, perform the following steps:

1. Go to any page of the page group and switch to Edit mode.

2. In the toolbar at the top of the page, click the Properties link next to Page Group.

Note:

Make sure you click the link next to Page Group and not the one next to Page (Figure 16-2).

3. Click the Configure tab to bring it forward.

4. In the Approvals and Notifications section you can see whether approvals and notifications are enabled or disabled. If you want to change this setting, click the Edit link (Figure 16-8).

Figure 16-8 Status of Approvals and Notifications for a Page Group

5. To enable approvals and notifications, select the Enable Approvals and Notifications check box (Figure 16-9).

Figure 16-9 Enabling or Disabling Approvals and Notifications for a Page Group

6. Click OK to save your changes.

7. Click Close to return to the page.

16.8.3.2 Grant Users the Manage Items With Approval Privileges

Note:

You can skip this step if your external workflow process does not require the approval or rejection of portal items.

The next step is to grant Manage Items With Approval privileges to all users who need approval for their items. For the purposes of this example, let's specify that all users require approval for their items.

To specify that all users require approval for their items, perform the following steps:

1. Go to any page in the page group and switch to Edit mode.

2. In the toolbar at the top of the page, click the Properties link next to Page Group.

Note:

Make sure you click the link next to Page Group and not the one next to Page (Figure 16-2).

3. Click the Approval tab to bring it forward.

4. Select the Require Approval for All Users check box (Figure 16-10).

Figure 16-10 Specifying That All Users Require Approval for Their Items

5. Click OK.

16.8.3.3 Run Scripts Required for the CMEF Workflow Integration Example

Before you proceed to the next step, there are several tasks that you need to perform. These steps are as follows:

1. Log in to the SYS schema and run the following command:

GRANT EXECUTE ON owf_mgr.wf_engine to cmefsamples;

2. Log in to the portal schema and run provsyns.sql. When prompted for the schema/provider name enter owf_mgr.

3. Log in to the CMEFSAMPLES schema and run the following:

drop sequence WF_SEQ

create sequence WF_SEQ
increment by 1
start with 1
maxvalue 1000000000
minvalue 1
cache 20

grant select on wf_seq to owf_mgr;

This creates the sequence required by workflow, and allows the OWF_MGR workflow schema SELECT privileges on the sequence.

4. Create the synonym WF_ENGINE to the workflow schema:

create synonym wf_engine for owf_mgr.wf_engine;

16.8.3.4 Create Subscriber and Check Procedures

You need to create a subscriber that listens to the WWSBR_EVENT_Q queue, waiting until a user adds an item that requires approval. The subscriber calls the WF_CHECKURL workflow process to perform the item validation and to send the e-mail notification. Example 16-17 shows the WORKFLOW_APPROVAL subscriber code.

Example 16-17 The WORKFLOW_APPROVAL Subscriber

create or replace procedure workflow_approval is
MIME_TYPE_TEXT      constant varchar2(30) := 'text/plain';
agent_list          dbms_aq.aq$_agent_list_t;
wait_time           integer               := 30;
begin_time          pls_integer;
end_time            pls_integer;
agent_w_message     aq$_agent;
dequeue_options     dbms_aq.dequeue_options_t;
message_properties  dbms_aq.message_properties_t;
message_handle      raw(16);
message             portal.wwsbr_event;
l_subscriber        varchar2(30)          := 'CMEF_WORKFLOW';
l_queue             varchar2(30)          := 'PORTAL.WWSBR_EVENT_Q';
l_mode              binary_integer        := dbms_aq.REMOVE;
l_attribute_site_id number                := 0;
l_event             varchar2(30);
l_doc               wwdoc_api.document_record;
l_desc              varchar2(4000);
l_itemkey           varchar2(100);
l_job_nr            number;
l_itemtype          varchar2(100)         := 'WF';
l_wf_process        varchar2(100)         := 'WF_CHECKURL';
l_is_indirect       boolean               := TRUE;
l_portal_user_name  varchar2(30)          := 'portal';
l_portal_password   varchar2(30)          := '<portal password>';
l_url               varchar2(4000);       := '';

begin
begin_time := dbms_utility.get_time;
agent_list(1) := aq$_agent(l_subscriber, l_queue, null);
loop
-- Wait for messages.
dbms_aq.listen(
agent_list => agent_list,
wait       => wait_time,
agent      => agent_w_message
);
if (agent_w_message.name = l_subscriber) then
dequeue_options.wait          := dbms_aq.NO_WAIT;
dequeue_options.consumer_name := l_subscriber;
dequeue_options.navigation    := dbms_aq.FIRST_MESSAGE;
dequeue_options.dequeue_mode  := l_mode;
dbms_aq.dequeue(
queue_name         => l_queue,
dequeue_options    => dequeue_options,
message_properties => message_properties,
payload            => message,
msgid              => message_handle
);
-- If the event is an ITEM INSERT event and marked for later publication.
if ((message.action       = 'SUBMIT_ITEM_FOR_APPROVAL') and
(message.object_class = 'ITEM') and
(message.raw_event    = 'INSERT') and
(message.state        = 'NOT_PUBLISHED') then
portal.wwctx_api.set_context(l_portal_user_name, l_portal_password);
-- Get the URL property for the object.
select url
into l_url
from portal.wwsbr_all_items
where id = message.object_id
and caid = message.object_site_id;
-- Get the nextval of the workflow sequence for the itemkey.
select wf_seq.nextval
into l_job_nr
from dual;
l_itemkey := lpad(to_char(l_job_nr), 5, '0');
-- Launch the workflow engine process and pass the paramters for
-- the portal item to the workflow process.
wf_engine.createprocess(l_itemtype, l_itemkey, l_wf_process);
-- Set the value for the portal URL.
wf_engine.setitemattrtext(l_itemtype, l_itemkey, 'PORTAL_URL', l__url);
-- Set the value for the portal item ID.
wf_engine.setitemattrnumber(l_itemtype, l_itemkey, 'PORTAL_ITEM_ID', message.object_id);
-- Set the value for the portal page group ID.
wf_engine.setitemattrnumber(l_itemtype, l_itemkey, 'PORTAL_SITE_ID', message.object_site_id);
-- Start the workflow process.
wf_engine.startprocess(l_itemtype, l_itemkey);
end if;
end if;
end_time := dbms_utility.get_time;
if (end_time - begin_time) > 3000 then
exit;
end if;
end loop;
exception
when OTHERS then
dbms_output.put_line(sqlerrm);
end workflow_approval;
/

You also need to create a procedure to check whether the user specified a file name for the item to determine whether or not it can be approved. The workflow process delegates the actual validation and approval of the item to this CHECK_URL procedure. Example 16-18 shows how to create the CHECK_URL procedure.

Example 16-18 The CHECK_URL Procedure

create or replace procedure check_url(
itemtype  in  varchar2,
itemkey   in  varchar2,
actid     in  number,
funcmode  in  varchar2,
resultout out varchar2) is

MIME_TYPE_TEXT      constant varchar2(30) := 'text/plain';
agent_list          dbms_aq.aq$_agent_list_t;
wait_time           integer               := 30;
begin_time          pls_integer;
end_time            pls_integer;
agent_w_message     aq$_agent;
dequeue_options     dbms_aq.dequeue_options_t;
message_properties  dbms_aq.message_properties_t;
message_handle      RAW(16);
message             portal.wwsbr_event;
l_subscriber        varchar2(30)      := 'CMEF_WORKFLOW';
l_queue             varchar2(30)      := 'PORTAL.WWSBR_EVENT_Q';
l_mode              BINARY_INTEGER    := dbms_aq.REMOVE;
l_attribute_site_id number            := 0;
l_event             varchar2(30);
l_doc               wwdoc_api.document_record;
l_desc              varchar2(4000);
l_itemtype          varchar2(100)    := 'WF';
l_itemkey           varchar2(100);
l_url               varchar2(100);
l_siteid            number;
l_itemid            number;
l_ignore            boolean          := FALSE;
l_is_indirect       boolean          := TRUE;
l_portal_user_name  varchar2(30)     := 'portal';
l_portal_password   varchar2(30)     := '<portal password>');
begin
-- Get the values for the attributes stored in the procedure.
l_url := wf_engine.getitemattrtext(itemtype,itemkey,'PORTAL_URL',l_ignore);
l_itemid := wf_engine.getitemattrnumber(itemtype,itemkey,'PORTAL_ITEM_ID',l_ignore);
l_siteid := wf_engine.getitemattrnumber(itemtype,itemkey,'PORTAL_SITE_ID',l_ignore);
-- Set the portal context.
portal.wwctx_api.set_context(l_portal_user_name, l_portal_password);
-- If the item type is a URL item and no URL is specified.
if l_url is null then
begin
-- Update the item to indicate that the URL needs to be specified.
l_desc := '<font color=RED>NO URL SPECIFIED</font>';
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
wwsbr_api.set_attribute(
p_site_id           => l_siteid,
p_thing_id          => l_itemid,
p_attribute_site_id => l_attribute_site_id,
p_attribute_id      => wwsbr_api.attribute_description,
p_attribute_value   => l_desc
p_log_cmef_message  => FALSE
);
-- Reject the item.
wwsbr_api.reject(
p_item_id     => l_itemid,
p_site_id     => l_siteid,
p_is_indirect => l_is_indirect,
p_comment     => 'Rejected'
);
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
end;
else
-- Approve the item.
begin
wwsbr_api.approve(
p_item_id => l_itemid,
p_site_id => l_siteid,
p_comment => 'Approved'
);
-- Reset the CMEF global variables.
wwsbr_api.clear_cmef_context;
end;
end if;
commit;
-- Process cache invalidation messages.
wwpro_api_invalidation.execute_cache_invalidation;
exception
when OTHERS then
dbms_output.put_line(sqlerrm);
end check_url;
/

Note:

CMEFSAMPLES will need to grant execute on WORKFLOW_APPROVAL and CHECK_URL to OWF_MGR:

grant execute on workflow_approval to owf_mgr;
grant execute on check_filename to owf_mgr;

16.8.3.5 Register the WF_CHECKURL Process with Oracle Workflow

The WF_CHECKURL process actually approves or rejects the portal item and sends the e-mail notification. You need to register this process with Oracle Workflow using the Oracle Workflow Builder (Figure 16-11).

Figure 16-11 The CHECK_FILE Oracle Workflow Process

Use the following steps to install the WF_CHECKURL process into the OWF_MGR schema:

1. Open the Oracle Workflow Builder.

Tip:

After installing the Workflow Builder, you may have to run it from the command line because you will have to set the ORACLE_HOME environment variable to that of the Workflow Builder. For example:

set ORACLE_HOME=c:\oraclewf

2. Start a new workflow project.

3. Save the workflow project as wf_checkurl.wft.

4. Close the Oracle Workflow Builder.

5. Open wf_checkurl.wft in a text editor, for example, Notepad.

6. Copy and paste the WF_CHECKURL code into the file. You can download this code from Portal Center:

http://www.oracle.com/technology/products/ias/portal/files/cm_overview_10g1014_cmef_samples.zip

7. Save the file and close the text editor.

8. Open wf_checkurl.wft in Oracle Workflow Builder.

9. Save wf_checkurl.wft into your portal database using the OWF_MGR schema.

Tip:

If you do not know the OWF_MGR password, see MetaLink Note 198800.1.

16.8.3.6 Add the CMEF_WORKFLOW Subscriber to the WWSBR_EVENT_Q Queue

Next, you need to add the CMEF_WORKFLOW subscriber to the WWSBR_EVENT_Q queue so that it can process the CMEF events and trigger the WF_CHECKURL Oracle Workflow process, as shown in Example 16-19.

Example 16-19 Adding the CMEF_WORKFLOW Subscriber to WWSBR_EVENT_Q

declare
subscriber sys.aq$_agent;
begin
1_subscriber := sys.aq$_agent('CMEF_WORKFLOW', null, null);
dbms_aqadm.add_subscriber(
queue_name => 'portal.wwsbr_event_q',
1_subscriber => subscriber
);
end;
/

Now, when a user with Manage Items With Approval privileges add an item to a page, it is marked as Pending and a single INSERT event occurs, with a state of NOT_PUBLISHED:

Action

Event

State

Object Class

SUBMIT_ITEM_FOR_APPROVAL

INSERT

NOT_PUBLISHED

ITEM

The CMEF_WORKFLOW_APPROVAL subscriber responds to this action and invokes the PORTAL_ITEM_WORKFLOW Oracle Workflow process.

The PORTAL_ITEM_APPROVAL Oracle Workflow process performs its business logic and calls the Oracle Portal approve or reject API to approve or reject the item. It also sends an e-mail notification to the specified e-mail ID indicating the approval status.

Part IV

Appendixes

Part IV contains the following appendixes:

- Appendix A, "Creating Portlets with the Portlet Builder"

- Appendix B, "Troubleshooting Portlets and Providers"

- Appendix C, "Mapping Profile Items to Attributes"

- Appendix D, "Manually Packaging and Deploying PDK-Java Providers"

- Appendix E, "Oracle Portal Provider Test Suite"

- Appendix F, "Content Management APIs and Views"

- Appendix G, "Content Management Event Framework Events"

A Creating Portlets with the Portlet Builder

You can find information on using Portlet Builder in Appendix A "Creating Portlets with the Portlet Builder" of the Oracle Fusion Middleware Developer's Guide for Oracle Portal Release 2 (10.1.4) in the Oracle Application Server Release 2 (10.1.2.0.2) library located on the Oracle Technology Network (http://www.oracle.com/technology/documentation/appserver1012.html).

B Troubleshooting Portlets and Providers

This appendix describes common problems that you might encounter when using Oracle Portal and explains how to solve them. It contains the following topics:

- Section B.1, "Diagnosing General Portlet Problems"

- Section B.2, "Diagnosing Java Portlet Problems"

- Section B.3, "Diagnosing OmniPortlet Problems"

- Section B.4, "Diagnosing Web Clipping Problems"

- Section B.5, "Need More Help?"

Note:

Throughout this chapter, you will see references to ORACLE_HOME. ORACLE_HOME represents the full path of the Oracle home, and is used in cases where it is easy to determine which Oracle home is referenced. The following conventions are used in procedures where it is necessary to distinguish between the middle tier, OracleAS Infrastructure, or Oracle Metadata Repository Oracle home:

- MW_HOME, represents the full path of the Oracle Fusion Middleware home.

- ORACLE_HOME, represents the full path of the middle-tier Oracle home.

- ORACLE_INSTANCE, represents the full path of the instance home associated with ORACLE_HOME.

- INFRA_ORACLE_HOME, represents the full path of the Oracle Application Server Infrastructure Oracle home.

- METADATA_REP_ORACLE_HOME, represents the full path of the Oracle Infrastructure home containing the Oracle Metadata Repository.

B.1 Diagnosing General Portlet Problems

This section describes common problems and solutions for all portlets. It contains the following topic:

- Section B.1.1, "Portlet Refresh Failure"

- Section B.1.2, "HTML Tags Appearing in Portlet"

B.1.1 Portlet Refresh Failure

When using the JavaScript document.write() method in conjunction with a Mozilla browser, you may find that portlet refresh does not work.

Problem

When using a Mozilla browser, such as Firefox, the document.write() method causes portlet refresh to no longer work as expected.

Solution

Avoid using document.write() in your output if you also want portlet refresh to work on Firefox. If this is not possible, you can choose to have the portlet not display the Refresh and Restore icons during rendering. You can also turn off portlet refresh and restore at the region level.

B.1.2 HTML Tags Appearing in Portlet

After upgrading from an earlier release to 11g Release 1 (11.1.1), you may find unformatted HTML appearing in your portlets, for example, in the portlet title.

Problem

When viewing a portlet, you see raw HTML. For example, you might see the following in a portlet title:

<b>Oracle Application Server 10<i>g</i> Collateral</b>

when what you expected to see was:

Oracle Application Server 10g Collateral

To protect against cross site scripting (XSS) attacks, Oracle Portal Release 10.1.4 escapes all user input by default. Thus, some HTML that was formatted in earlier releases now appears unformatted because it has been escaped to plain text.

Solution

You can resolve this issue in one of the following two ways:

- Tell your users to stop entering HTML tags as part of their input and have them enter only plain text.

- Turn on compatibility mode to make your Oracle Portal instance behave the way it did in releases prior to Release 10.1.4, that is, stop the default escaping of HTML to plain text. Note that turning on compatibility mode makes your portal instance less secure.

For more information on these options, refer to Oracle Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer.

B.2 Diagnosing Java Portlet Problems

This section describes common problems and solutions for Java portlets. It contains the following topics:

- Section B.2.1, "Portlet Logging"

- Section B.2.2, "Installation and Deployment Problems"

- Section B.2.3, "Portlet Code Does Not Compile"

- Section B.2.4, "Application Server Connection Test Fails"

- Section B.2.5, "Provider Test Page Shows Error"

- Section B.2.7, "Portlet Does Not Display on Page"

- Section B.2.8, "After Initial Successful Display, Portlet Does Not Display on Page"

B.2.1 Portlet Logging

In addition to specific issues listed in the other sections of this appendix, the following general techniques can help you to troubleshoot portlet problems.

Problem 1

When accessing a portal page, the portlet does not display or displays an error message.

Solution 1

Check the diagnostic log file look for errors.

For Oracle Portal:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\logs\WLS_PORTAL-diagnostic.log

For a custom Web provider:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\logs\WLS_PORTAL-diagnostic.log

Problem 2

Pertinent information that may help solve the problem is not being recorded in the log file.

Solution 2

Increase the provider's log level to produce more detailed logging information by adding the following entry to the web.xml file:

<env-entry>
<env-entry-name>oracle/portal/provider/global/log/logLevel</env-entry-name>
<env-entry-value>6</env-entry-value>
<env-entry-type>java.lang.Integer</env-entry-type>
</env-entry>

B.2.2 Installation and Deployment Problems

This section describes problems that you may encounter when installing and deploying the PDK-Java framework and samples.

B.2.2.1 Cannot Find a Java Class Object

You receive an error message about a Java class that does not exist. For example:

An unexpected error occurred-29540 : class
oracle/webdb/provider/web/HttpProviderDispatcher does not exist (WWC-43000)

Problem

The referenced Java class object is not in the database or it is invalid. Oracle Portal, not PDK-Java, generates the error message when it cannot execute the class.

Solution

Log in to the database as your main Oracle Portal schema. Execute a SELECT statement to verify that the object is in the schema. For example:

SELECT object_name, object_type, status FROM user_objects
WHERE object_name like '%HttpProvider%'

Note that the name between quotes is case sensitive.

You should receive the following back:

/3334f18_HttpProviderDispatcher

Check for invalid or missing JAVA CLASS objects. Something could be wrong with the Oracle Portal installation. If so, then recompiling invalid objects might help resolve it.

B.2.2.2 Cannot Deploy the template.ear File

You receive the following error message when deploying your EAR file based on template.ear:

Invalid J2EE application file specified - Base Exception:
Cannot get xml document by parsing WEB-INF/web.xml in template.war: <Line 88,
Column 14> : '--' is not allowed in comments.
Resolution:

Problem

The web.xml file contains a syntax error.

Solution

Verify that the syntax of web.xml is correct. Some versions of web.xml shipped in template.war have a misplaced comment tag. Make sure that all opening comment tags, <!--, have a matching closing tag, -->, before starting a new comment tag.

B.2.2.3 Error When Attempting to Register Provider

A number of errors may occur when you attempt to register your provider. This section explains what can go wrong and how you can correct it. If your scenario is not covered in this section, then check the application.log of your provider or, if that does not help, use logcfg.sql for Portal Repository logging. For more information logcfg.sql and application.log, refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Problem 1

You receive the following error message:

Internal error (WWC-00006)
The provider URL specified may be wrong or the provider is not running.
(WWC-43176)

When OracleAS Portal attempts to register your provider, it must contact the listener that serves your Web portlets. If you have already accessed the provider's test page, http://host.domain:port/context/providers/servicename, according to the installation instructions, Oracle Portal may not recognize your machine.

Solution 1

Make sure the machine where Oracle Portal resides can access your Web provider listener. The easiest way to test this setup is to start a browser on the host of the Oracle Portal repository database and try to access the provider's test page. If the browser needs a proxy setting to reach the provider, then you should set the same proxy for Oracle Portal on the Administer tab. You should also use this proxy when registering the provider.

If your Web provider server is not part of the DNS, then add an entry in the Oracle Portal server's host file.

If a firewall exists between the machine with the Oracle Portal database and the machine with the provider, then make sure that the necessary port is open.

Problem 2

You receive the following error:

Internal error (WWC-00006)
The provider URL specified may be wrong or the provider is not running.
(WWC-43176)
The following error occurred during the call to Web provider: Can't read
deployment properties for service: _default (WWC-43147)

When you register a provider, you have the option of specifying a Service Id. If you do not specify anything in the Service Id field, the registration URL will not contain the service name part, http://host.domain:port/context/providers/. Therefore, Oracle Portal is looking for a default service, which is stored in a deployment file called _default.properties. When this file is not found, you receive this error.

Solution 2

Make sure that you bundle a file called _default.properties into your WAR file with the following path:

/Web-inf/deployment/

The _default.properties file should define the default service to use when none is specified for the provider. The file should look similar to the following:

serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/test/provider.xml
autoReload=true
testPageURI=/htdocs/testpage/TestPage.jsp

Problem 3

You receive the following error message:

Internal error (WWC-00006)
The provider URL specified may be wrong or the provider is not running.
(WWC-43176)
The following error occurred during the call to Web provider: Can't read
deployment properties for service: test (WWC-43147)

Oracle Portal cannot find the deployment properties file for the service you specified in the Service Id field or the service name part of the registration URL, http://host.domain:port/context/providers/servicename. For example, suppose you received this error in response to your attempt to register your provider with the following URL:

http://host.domain:port/context/providers/test

In this case, you probably do not have a file called test.properties in your WAR file in /Web-inf/deployment/.

Solution 3

Make sure that you bundle a deployment properties file (for example, test.properties) into your WAR file with the following path:

/Web-inf/deployment/

The file should look similar to the following:

serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/test/provider.xml
autoReload=true
testPageURI=/htdocs/testpage/TestPage.jsp

Problem 4

You receive the following error message:

An error occurred when attempting to call the providers register function.
(WWC-43134)
The provider URL specified may be wrong or the provider is not running.
(WWC-43176)
The following error occurred during the call to Web provider: Class
oracle.portal.provider.v2.render.RenderManager has no set or add method for tag
"createdOn" (WWC-43147)

Solution 4

If you are using DefaultProvider, provider.xml includes the element <createdOn>. When the XML is parsed, the initialization process looks for a method called setCreatedOn in the class representing the containing element. For example:

<renderer class="my.local.Renderer">
<createdOn>12-Mar-2001</createdOn>
...
</renderer>

In this example, the initialization process looks for my.local.Renderer.setCreatedOn(). In your case, the appropriate method does not exist, causing this error.

Problem 5

You receive an error like the following:

(WWC-00006)
An unexpected error occurred: User-Defined Exception
(WWC-43000)
wwpro_api_provider_registry.register_provider
An unexpected error occurred: ava.sql.SQLException: Inserted value too large for column:

This error indicates that your portlet has exceeded the data limit for a portlet. Each portlet is limited to 4K of data. The lengths of all of the following contribute toward this data limit:

- provider name, display name, and description

- parameter name, display name, and description

- event name, display name, and description

Solution 5

You can take the following two actions to reduce the amount of data used for the portlet:

- Reduce the length of the portlet's parameter and event names, display names, and descriptions.

- Reduce the number of parameters and events in your portlet

B.2.2.4 Error Adding a Portlet to a Provider

You added a portlet to your provider, but, when you view the provider in Oracle Portal, you do not see the new portlet.

Problem

The most common problem is a syntactical error in provider.xml, but it could also be that the updated provider.xml file is not being found for some reason.

Solution

Try the following:

- Examine provider.xml. Ensure that you have two syntactically correct opening and closing portlet tags within the provider tag. For example:

<provider class="oracle.portal.provider.v2.DefaultProviderDefinition"
session="true">
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition"
version="1">
<id>1</id>
...
</portlet>
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition"
version= "1">
<id>2</id>
...
</portlet>
</provider>

- Check the test page for errors. If no errors are found, then refresh the provider.

- Check the application.log of the provider for errors.

B.2.2.5 Portlet Does Not Exist

You received the following error message:

Error: The listener returned the following Message: 500 Portlet with id $1 doesn't
exist

Problem

You removed a portlet from provider.xml without first removing the portlet from the page. The portlet no longer appears on the Customization page and therefore you cannot remove it from the page.

Solution

Delete the region that contains the portlet. Remember, when deleting a portlet from provider.xml, delete the portlet from the page first.

B.2.2.6 File Not Found

You receive the following error message:

Request URI:/jpdk/snoop/snoopcustom.jsp Exception: javax.servlet.ServletException:
java.io.FileNotFoundException:
C:\iAS\Apache\Apache\htdocs\jpdk\snoop\snoopcustom.jsp (The system cannot find the
path specified)

Problem

You added a JSP portlet to your page. Oracle Portal cannot locate the JSP in the file system through provider.xml.

Solution

Confirm the file name and location and verify the information within provider.xml.

B.2.2.7 XML Parser Error

The XML Parser may fail at times when parsing your provider.xml. This section explains what can go wrong and how you can correct it.

Problem 1

You receive the following error message:

Error: The XML parser encountered an Error, and could not complete the conversion
for portlet id=150, it returned the following message: XML Parsing Error

You attempted to register your provider or display portlets on a page, and received this error message. When altering provider.xml, one or more of the tags were corrupt and the file cannot be parsed.

Solution 1

Review provider.xml for errors.

Problem 2

You receive the following error message:

Error: The XML parser encountered an Error, and could not complete the conversion
for portlet id=146, it returned the following message: XSL reference value missing
in XML document.

You attempt to add your portlet to a page or register your provider, and you receive this error. The portlet information within provider.xml may be incorrect. Another possibility is that your classes cannot be located.

Solution 2

Check that no tags are missing and that they appear in the correct sequence. Verify that your class files exist and are specified correctly within provider.xml.

B.2.2.8 Error Adding Portlets

You receive the following error message when trying to add portlets to a page:

Error: An unexpected error occurred: ORA-29532: Java call terminated by uncaught
Java exception: Attribute value should start with quote.
(WWC-43000) An unexpected error occurred: Attribute value should start with quote.
at oracle.xml.parser.v2.XMLError.flushErrors(XMLError.java:205)

Problem

Oracle Portal has an issue with provider.xml. Most likely, an attribute within the file is corrupt.

Solution

Review provider.xml for errors.

B.2.2.9 Content Request Timed Out

You receive the following error message:

ERROR TIMEOUT FOR CONTENT=timeout

Problem

You successfully registered your Web provider. When adding portlets to a page or refreshing a page with existing portlets, you receive the timeout error message. This error indicates that Oracle Portal timed out trying to contact your Java portlet listener.

Solution

Verify that you can still access the sample page:

http://host:port/context/providers/servicename

You set the timeout period by adding the following init parameters to the page servlet of Oracle Portal's appConfig.xml at:

MW_HOME\user_projects\domains\<DomainName>\config\fmwconfig\servers\WLS_PORTAL\applications\portal\configuration

Note that this appConfig.xml file is for the Parallel Page Engine. For example:

<requesttime>1000</requesttime>
<minTimeout>100</minTimeout>
<stall>500</stall>

For more information about appConfig.xml and its configuration parameters, refer to Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

You may also set a timeout value for individual providers when you register them with Oracle Portal. Note that the provider timeout value must match or exceed the minTimeout parameter value in appConfig.xml in order to have any effect. For information about registering PDK-Java providers, refer to Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet". For information about registering WSRP providers, refer to Section 6.3.4, "Registering and Viewing Your JSR 168 Portlet."

B.2.2.10 Message 500 Returned

You receive the following error message:

Error: The listener returned the following Message: 500

Problem

This generic message displays when Oracle Portal receives an Internal Server Error while attempting to display your portlet. This problem might have any one of several causes.

Solution

Review the WLS_PORTAL-diagnostic.log file located at MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\logs to discover the cause of the error.

B.2.2.11 JPS Portlets with the get Method not Working

HTML forms can be submitted using either the get or post method, but the WSRP standard only requires the consumer (portal) to use the post method. Support of the get method is optional according to the standard. Since portal consumers are not required to support the get method, we highly recommended that you use the post method when developing your portlets.

Problem

You have JPS portlets that use the get method and they are not working correctly in Oracle Portal. Forms with get lose the query string in the action URL when the form is submitted. The query string is needed for the portlets to return back to the portal and for the WSRP state.

Solution

Replace the get method with the post method.

B.2.2.12 Portlet Displays Session Expired Message After Redeployment

When you redeploy your portlets to the portlet container, all existing sessions between the producer and all of its consumers are lost. If a consumer tries to reuse an existing producer session, it may receive an error message the first time it tries to contact the producer after redeployment.

Problem

You receive an error message in your portlet the first time you access it after redeployment.

Error: Could not get markup. The cookie or session is invalid or there is a runtime exception.

Solution

To reestablish the producer's session, refresh the portal page. You won't see this error message if you are re-accessing the portlet from a new browser session because it automatically establishes a new producer session.

B.2.3 Portlet Code Does Not Compile

When you try to compile the code for your portlet, you receive a compilation error.

Problem

The Portlet Development library is not selected.

Solution

Make sure that Portlet Development library is selected for the project. Edit your project's properties and select the Profiles > Development > Libraries entry in the pane on the right. Make sure that the Portlet Development library is listed under Selected Libraries.

B.2.4 Application Server Connection Test Fails

In Oracle JDeveloper, the Application Server Connection Test fails with the message Connection refused: connect.

Problem 1

WebLogic Server is not running.

Solution 1

Make sure WebLogic Server is up and running by typing the following URL in your browser: http://yourhostyourdomain:7001

Problem 2

The connection information is incorrect.

Solution 2

Verify the connection information that you provided in the Connection Setup wizard.

B.2.5 Provider Test Page Shows Error

When accessing the provider test page with your browser, an error is shown.

Problem 1

The provider.xml syntax is incorrect.

Solution 1

Correct the provider.xml syntax. Refer to the PDK-Java XML Provider Definition Tag Reference document on Portal Studio:

http://www.oracle.com/technology/products/ias/portal/html/javadoc/xml_tag_reference_v2.html

Problem 2

Needed JAR files are missing from the deployment environment.

Solution 2

Search the JAR files for the missing class. When the missing JAR file is identified, you can add to the lib directory of the application from the Oracle JDeveloper Deployment Profile. Refer to the Oracle JDeveloper Online Help System for more information about the deployment profile.

B.2.6 Web Provider Not Appearing in Portlet Repository

Users cannot see a Web provider, such as Omniportlet, in the Portlet Repository even though it has been registered successfully and is visible in the navigator.

Problem

The Web provider uses DBPreferenceStore and the database information stored in data-sources.xml is incorrect.

Solution

Correct the information in data-sources.xml. Refresh the provider and invalidate the Portlet Repository cache.

B.2.7 Portlet Does Not Display on Page

When you access a portal page, the portlet does not display on the page.

Problem 1

The provider is not running.

Solution 1

Make sure that the provider is up and running by entering the provider registration URL in your browser's address bar.

Problem 2

The security manager for the provider is preventing the portlet from displaying.

Solution 2

In the provider definition file, provider.xml, delete or comment out the security manager, if any.

Problem 3

The user may not have the Execute privilege for the portlet as defined on the portlet's Access page.

Solution 3

Check the privileges for the portlet and, if the user or a group the user belongs to does not have the Execute privilege, grant them access. Portlets sometimes inherit their access privileges from the provider. You can use the Navigator in Oracle Portal to find the portlet's provider and check its access privileges, then drill down to the portlet to see its access privileges.

Problem 4

You get an error trying to display the portlet after you redeployed it.

Solution 4

Refer to Section B.2.2.12, "Portlet Displays Session Expired Message After Redeployment".

B.2.8 After Initial Successful Display, Portlet Does Not Display on Page

When you access a portal page, the portlet initially displays on the page but returns error messages in subsequent display attempts.

Problem

The provider session information is incorrect.

Solution

Check whether or not the provider uses sessions. If it does, edit the provider registration information to make sure that you registered it accordingly:

Login Frequency: Once per User Sessions

You should also confirm that <session> is set to true in provider.xml.

B.3 Diagnosing OmniPortlet Problems

This section provides information to help you troubleshoot problems you may encounter while using OmniPortlet.

To view errors that occur during the execution of OmniPortlet, perform the following:

- Open the WLS_PORTAL.log file:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\logs

- Display the HTML source (for example, in Microsoft Internet Explorer browser, choose View > Source), and locate the errors embedded in the output HTML as comments.

To alter the logging level of the OmniPortlet Provider, perform the following action:

- Open the web.xml file and modify the context-param value of oracle.portal.log.LogLevel to the possible values ranging from 1 to 8 (where 8 means debug). The web.xml file is located at:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\portalTools_11.1.1.1.0\kjdcke\war\WEB-INF\web.xml

The OmniPortlet errors that you are most likely to encounter, and possible solutions, are as follows:

- Section B.3.1, "OmniPortlet Cannot Access the Specified URL"

- Section B.3.2, "Portlet Content Is Not Refreshed"

B.3.1 OmniPortlet Cannot Access the Specified URL

Your OmniPortlet displays errors or does not display the correct content.

Problem 1

The URL is not active.

Solution 1

Type the URL directly in your browser address field to test its validity.

Problem 2

If a proxy server is required to reach the site, the proxy settings are not valid. The following messages may display:

Failed to open specified URL.Cannot open the URL specified because of connection timeout.

Solution 2

Check that your proxy settings are valid by clicking Edit for the HTTP Proxy Setting in the OmniPortlet Provider Test Page.

Problem 3

The message OmniPortlet timed out displays in your OmniPortlet.

Solution 3

Perform either of the following tasks:

1. If a proxy server is required to reach the site, see "Solution 2".

2. If the URL request takes a long time to process (for example, it executes a long running query), try increasing the timeout value (in seconds) in the OmniPortlet provider.xml file in:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\portalTools_11.1.1.1.0\1pwj8k\war\WEB-INF\providers\omniPortlet

If you change the timeout value, you also need to do the following:

- Bounce your middle-tier.

- Increase the provider registration Timeout value of the Oracle Portal instances with which this provider is registered.

Problem 4

If HTTP authentication is required and the user name and password are missing or not valid, the following error message displays:

Authorization failed when connecting to the URL specified. Provide correct user name and password to connect.

Solution 4

To configure the Secured Data (Web Clipping) Repository Setting, click Edit on the OmniPortlet Provider Test Page. On the Source tab, click Edit Connection and enter a valid user name and password on the Connection Information page. To enter the connection information, the Secured Data Repository must be already be configured. To configure its settings, click Edit on the OmniPortlet Provider Test Page.

Problem 5

If opening a URL to an HTTPS site with a certificate and the certificate is identified as not valid, the following error message displays in the portlet:

SSL handshake failed for HTTPS connection to the specified URL. The certificate file needs to be augmented.

Solution 5

See the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Problem 6

If the proxy server requires authentication and the user name and password are missing or not valid, the following error message displays:

Invalid or missing user proxy login information.

Solution 6

Check that your proxy server user name and password are valid. Refer to Section B.4.5, "HTTP Error Code 407 When Clipping Outside Firewall" for more information.

B.3.2 Portlet Content Is Not Refreshed

After changing portlet properties in the Edit Defaults page, your portlet content is not refreshed.

Problem 1

Oracle Web Cache invalidation is not configured properly.

Solution 1

See Section I.2.1.3 "Configuring Caching (PDK Only)" in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Problem 2

You have personalized the portlet.

Solution 2

See Section B.3.3, "Edit Defaults Changes are Not Reflected in the Personalized Portlet".

B.3.3 Edit Defaults Changes are Not Reflected in the Personalized Portlet

When you personalize the portlet at runtime using the Personalize link, the new property values are not reflected in the personalized version of the portlet.

Problem

When you personalize the portlet, a complete copy of the personalization object file is created. Since all properties are duplicated, subsequent modifications through Edit Defaults are not reflected in the personalized version.

Solution

To ensure the latest changes are made to the portlet, click Personalize again (after the modifications using Edit Defaults), then select the Reset to Defaults option.

B.4 Diagnosing Web Clipping Problems

This section provides information to help you troubleshoot the following problems you may encounter while using the Web Clipping provider or Web Clipping Studio:

- Section B.4.1, "Setting Logging Levels"

- Section B.4.2, "Reviewing Error Messages"

- Section B.4.3, "Checking the Status of the Provider with the Test Page"

- Section B.4.4, "Problem Connecting to the Web Site for Clipping"

- Section B.4.5, "HTTP Error Code 407 When Clipping Outside Firewall"

- Section B.4.6, "Cannot Clip a Page"

- Section B.4.7, "Images Not Retrieved with Clipping"

- Section B.4.8, "Resolving Problems with Migration of URL-based Portlets"

B.4.1 Setting Logging Levels

By default, the logging level of Web Clipping is set to level 3, which provides information about configuration, severe errors, and warnings. This level is reasonable for day-to-day operations. To view information useful for debugging, you should set the logging level to 8.

To set the logging level, edit the web.xml file, which is located at:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\portalTools_11.1.1.1.0\kjdcke\war\WEB-INF\web.xml

To set the level to 8 and display debugging information, set the value of the parameter oracle.portal.log.LogLevel as follows:

<context-param>
<param-name>oracle.portal.log.LogLevel</param-name>
<param-value>8</param-value>
</context-param>

After you make the change, restart the Web application.

B.4.2 Reviewing Error Messages

Errors that occur when accessing the Test Page or executing of the Web Clipping portlet are written to:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\logs\WLS_PORTAL.log

B.4.3 Checking the Status of the Provider with the Test Page

You can use the Web Clipping Provider Test Page to determine if the provider is functioning properly. To access the Test Page, click Web Clipping Provider from the Portal Tools Application Welcome Page, which is located at:

http://host:port/portalTools

The Provider Test Page: Web Clipping is displayed. It provides the following information:

- Portlet information about the Web Clipping portlet. The Web Clipping provider contains only one portlet.

- Provider initialization parameters and values.

- Provider status, with links to pages for editing the configuration.

For more information about using the Test Page, see the "Administering Web Clipping" appendix in the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

B.4.4 Problem Connecting to the Web Site for Clipping

You encounter difficulties making or maintaining connections to the Web site containing the clipping.

Problem 1

If you cannot access the Web site using Web Clipping Studio, you may be using an incorrect URL.

Solution 1

To be sure a URL is correct, test the URL that you want to clip in a browser before you attempt to clip it. Also test the URL to be sure that it is accessible from the provider middle tier.

Problem 2

The connection times out when attempting to browse to any Web site and your environment uses a proxy server to connect to HTTP servers outside a firewall.

Solution 2

Make sure that the proxy servers are configured correctly.

To configure the proxy servers, go to the Web Clipping Provider Test Page, as described in Section B.4.3, "Checking the Status of the Provider with the Test Page". In the Web Clipping Provider Test Page, click Edit in the Actions column of the HTTP Proxy row. In the Edit Provider page, specify the HTTP Proxy Host and the HTTP Proxy Port for the HTTP Proxy.

For access to servers inside the firewall, you can specify a list of domain names that need not go through the firewall by selecting No Proxy for Domains beginning with and entering the URL. You do not need to restart the managed server for the new settings to take effect.

For more information about configuring proxy servers, see the "Administering Web Clipping" appendix of the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Problem 3

Your configuration includes a load balancer and you experience difficulty making or maintaining connections while attempting to add a clip to a Web Clipping portlet.

Solution 3

The configuration was not set up correctly. To solve this problem, perform the following:

- If multiple Oracle WebLogic Server instances are set up behind a load balancer, the Web Clipping Repository and HTTP proxy must be configured identically on all Oracle WebLogic Server instances before you join them to the load balancer.
Web clippings have definitions that must be stored persistently in the Web Clipping Repository hosted by an Oracle Database server. In a multiple middle-tier environment, all instances of Oracle WebLogic Server must store definitions in the same repository.

- The Load Balancer must be session-enabled. If it is not, the first request connects, but subsequent requests, which may be routed to a different instance, fail.

For more information about configuring with a load balancer, see the "Performing Advanced Configuration" chapter of the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

Problem 4

You use a reverse proxy, but cannot make a connection.

Solution 4

Make sure that the reverse proxy server is configured correctly. See the "Performing Advanced Configuration" chapter of the Oracle Fusion Middleware Administrator's Guide for Oracle Portal for information about configuring a reverse proxy.

Problem 5

You cannot connect and the error log contains a message about denying logon to the database. (See Section B.4.1, "Setting Logging Levels" for information about the error log.)

Solution 5

The PORTAL schema password for the infrastructure database may have been modified manually and it may not match the password stored in Oracle Internet Directory. Refer to the Oracle Fusion Middleware Administrator's Guide for Oracle Internet Directory for more information about setting the password.

B.4.5 HTTP Error Code 407 When Clipping Outside Firewall

The proxy servers are configured for proxy authentication and you receive HTTP error code 407 when you attempt to clip a page outside the firewall.

Problem

The proxy servers are configured for proxy authentication, but you have not configured proxy authentication.

Solution

You must manually configure proxy authentication. Web Clipping supports both global proxy and per-user authentication. You can specify the realm of the proxy server and whether all users login automatically with a provided user name and password, each user logs in with an individual user name and password, or all users log in with a specified user name and password. For more information about configuring proxy authentication, see the "Administering Web Clipping" appendix of the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

B.4.6 Cannot Clip a Page

You can connect to the Web site, but you cannot clip the page.

Problem

The page may be overpopulated with IFrames.

Solution

View the page in a browser and look at the page source. If it contains IFrames, start browsing in Web Clipping Studio using the URL pointed to by the IFrame src attribute.

B.4.7 Images Not Retrieved with Clipping

Images in a Web clipping are not retrieved with the rest of the clipping.

Problem

Because images are treated as links (using the src attribute of the IMG tag), images from clipped sites are served directly from the original sites. If the images require that you enable proxy settings during creation of the clipping, then disabling the browser proxy setting disables the viewing of the images in a clipping.

Solution

Enable proxy settings in the browser.

B.4.8 Resolving Problems with Migration of URL-based Portlets

You can migrate URL-based portlets that are stored in a provider.xml file to Web Clipping portlets. This section explains how to troubleshoot issues that arise as you migrate your portlets to Web Clipping portlets. For more information on the migration process itself, refer to Section 5.6, "Migrating from URL-Based Portlets".

B.4.8.1 File Not Found Exception When Running Migration Tool

When you run the migration tool, you receive the following exception:

Exception in thread "main" java.io.FileNotFoundException:
/wrongpath/somservice.properties (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at oracle.webdb.wcs.client.urlservices.UrlServicesMigrator.importService
(UrlServicesMigrator.java:631)
at oracle.webdb.wcs.client.urlservices.UrlServicesMigrator.main
(UrlServicesMigrator.java:724)
at oracle.webdb.wcs.WcWebdbMain.main(WcWebdbMain.java:60)

Problem

The files you specified for the deployment properties file for either the URL-based portlets service or the Web Clipping Portlet service do not exist.

Solution

Verify the path to both service deployment properties files in the argument list to see if they point to the correct location.

B.4.8.2 Null Pointer Exception When Running Migration Tool

When you run the migration tool, you receive the following exception:

Exception in thread "main" java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:375)
at java.util.Properties.setProperty(Properties.java:97)
at oracle.webdb.wcs.client.urlservices.UrlServicesMigrator.setRepository
(UrlServicesMigrator.java:415)
at oracle.webdb.wcs.client.urlservices.UrlServicesMigrator.main
(UrlServicesMigrator.java:733)
at oracle.webdb.wcs.WcWebdbMain.main(WcWebdbMain.java:58)

Problem

The Repository settings are not configured for the Web Clipping Provider.

Solution

See Section 5.6.1, "Preparing for Migration" for information about steps you must take before running the migration tool.

B.4.8.3 Target provider.xml is Already Migrated Error

When you run the migration tool, you receive the following error:

Error: Target provider.xml is already migrated.

Problem

The provider.xml file pointed to by the URL-based portlets service deployment properties file has already been migrated. The provider definition class specified in the provider.xml file is already in WcProviderDefinition.

Solution

If you want to redo the migration, rename your service in both the deployment properties file and the entire directory name under WEB-INF/providers and then run the migration again.

B.4.8.4 Cannot Migrate provider.xml with Class Error

When you run the migration tool, you receive the following error:

Error: Can't migrate provider.xml with class <someclass>

Problem

The provider.xml file pointed to by the URL-based portlets service deployment properties file contains a provider class name that does not match the one used by URL-based portlets. Specifically, the Provider class name specified in the file is not oracle.portal.provider.v2.http.URLProviderDefinition. The migration tool is intended to migrate URL-based Portlet provider definitions, not any other kind of provider definitions. Even those classes which sub-class from URL-based portlets provider definition will not be correctly migrated.

Solution

You cannot migrate this service.

B.5 Need More Help?

You can find more solutions on Oracle MetaLink, http://metalink.oracle.com. If you do not find a solution for your problem, log a service request.

See Also:

Oracle Portal Release Notes, available on the Oracle Technology Network.

C Mapping Profile Items to Attributes

When developing portlet functionality that requires access to a user's identity, you often need to map between attributes in Oracle Portal and Oracle Internet Directory, and userProfileItems in WSRP. Note that for Oracle Portal, these attributes are static and cannot be configured. This appendix provides a table that shows the mapping between various attributes.

C.1 Mapping userProfileItems to Attributes

Table C-1 provides a mapping of userProfileItems to Oracle Internet Directory and Oracle Portal attributes.

Note:

In cases where the Oracle Internet Directory attribute holds a complex string, like homePostalAddress, it is parsed into the needed component strings. The delimiter is assumed to be the dollar sign ($). For example, suppose you had the following value for homePostalAddress in Oracle Internet Directory:

123 Main St$$$Smallville$NY$10001

In the Oracle Portal profile attributes, this string would be parsed as follows:

- 123 Main St goes into HOME_ADDR1.

- Smallville goes into HOME_CITY.

- NY goes into HOME_STATE.

- 10001 goes into HOME_ZIP.

Table C-1 userProfileItems Mapping

Oracle Portal Profile Attributes

Oracle Internet Directory Attributes

WSRP userProfileItems

FIRST_NAME

givenName

name/given

LAST_NAME

sn

name/family

MIDDLE_NAME

middleName

name/middle

KNOWN_AS

displayName

name/nickname

DATE_OF_BIRTH

orclDateOfBirth

bDate

ORGANIZATION

o

employerInfo/employer

TITLE

title

employerInfo/jobtitle

HOME_ADDR1

homePostalAddress

homeInfo/postal/name

HOME_ADDR2

homeInfo/postal/street

HOME_ADDR3

homeInfo/postal/organization

HOME_CITY

homeInfo/postal/city

HOME_STATE

homeInfo/postal/stateprov

HOME_ZIP

homeInfo/postal/postalcode

HOME_COUNTRY

homeInfo/postal/country

HOME_PHONE

homePhone

homeInfo/telecom/telephone/number

OFFICE_ADDR1

street

businessInfo/postal/name

OFFICE_ADDR2

businessInfo/postal/street

OFFICE_ADDR3

businessInfo/postal/organization

OFFICE_CITY

l

businessInfo/postal/city

OFFICE_STATE

st

businessInfo/postal/stateprov

OFFICE_ZIP

postalCode

businessInfo/postal/postalcode

OFFICE_COUNTRY

c

businessInfo/postal/country

WORK_PHONE

telephoneNumber

businessInfo/telecom/telephone/number

FAX

facsimileTelephoneNumber

businessInfo/telecom/fax/number

MOBILE_PHONE

mobile

businessInfo/telecom/mobile/number

EMAIL

mail

businessInfo/online/email

D Manually Packaging and Deploying PDK-Java Providers

This appendix explains how to manually package your PDK-Java provider implementation into a portable format suitable for deployment on the Oracle WebLogic Server or another J2EE application server. It then explains how to deploy the resulting EAR file in an Oracle WebLogic Server environment and subsequently register it with one or more Oracle Portal instances.

Note:

In general, we recommend that you package and deploy your providers using the tools available in Oracle JDeveloper. However, if you find that you must package and deploy your providers manually for some reason, we provide the information in this appendix for your reference.

- Section D.1, "Introduction"

- Section D.2, "Packaging and Deploying Your Providers"

D.1 Introduction

Before preceding with packaging and deploying your provider, you must understand the following basic concepts:

- Section D.1.1, "WAR and EAR files"

- Section D.1.2, "Service Identifiers"

D.1.1 WAR and EAR files

WAR and EAR files are used to deploy applications on a J2EE application server, such as Oracle WebLogic Server. The WAR and EAR files encapsulate all of the components necessary to run an application in a single file. These files make the deployment of an application very easy and consistent, reducing the possibility of errors when moving an application from development to test, and test to production.

- WAR files represent a Web application and include all the components of that Web application, including Java libraries or classes, servlet definitions and parameter settings, JSP files, static HTML files, and any other required resources.

- EAR files represent an enterprise application.

D.1.2 Service Identifiers

PDK-Java enables you to deploy multiple providers under a single adapter servlet. The providers are identified by a service identifier. When you deploy a new provider, you must assign a service identifier to the provider and use that service identifier when creating your provider WAR file. The service name is used to look up a file called service_id.properties, which defines the characteristics of the provider, such as whether to display its test page.

For example, you can register the PDK-Java samples provider using the following URL and a service identifier of urn:sample:

http://mycompany.com/jpdk/providers

Alternatively, you can use a URL of the form:

http://mycompany.com/jpdk/providers/sample

where the provider name (sample) is appended to the URL of the PDK-Java samples provider. In this case, you should leave the Service Id field blank when registering the provider.

You can specify the service identifier separately in cases where multiple portals are sharing the same provider. By registering each portal with a different service identifier, you can specify the provider properties for each consumer independently.

Once your provider has been deployed, you must use the correct service identifier to register your provider with Oracle Portal, which ensures that requests are routed to the correct provider. If the adapter servlet receives a request without a service identifier, the request goes to the default provider.

Note:

If you do not know the service identifier, check the provider test page or contact the administrator of the provider. If you are using the Federated Portal Adapter, the URL points to the adapter, not the provider, thus you must enter a value for this field. In this case, the service identifier would be urn: followed by the name of the database provider.

D.2 Packaging and Deploying Your Providers

The following sections show the steps you must perform to package and deploy a provider manually:

- Section D.2.1, "Packaging Your Provider"

- Section D.2.2, "Deploying Your EAR File Using Fusion Middleware Control"

- Section D.2.3, "Testing Deployment"

- Section D.2.4, "Setting Deployment Properties"

- Section D.2.5, "Securing Your Provider"

- Section D.2.6, "Registering Your Provider"

D.2.1 Packaging Your Provider

The steps in this section explain how to manually package a WAR file. If you are familiar with one of the various utilities for assembling WAR files, you are free to assemble your WAR file that way.

- Section D.2.1.1, "Preparing Your Directories"

- Section D.2.1.2, "Specifying Your Default Service"

- Section D.2.1.3, "Creating Your WAR File"

- Section D.2.1.4, "Creating Your EAR File"

D.2.1.1 Preparing Your Directories

In preparation for creating your WAR file, you need to perform the following steps:

1. Create a working directory where you can collect the necessary files.

2. Extract the template.war file from /pdk/jpdk/v2/template.war into your working directory. Make sure that you extract the file paths, too.

3. If your provider needs any additional JAR files, add them to the WEB-INF/lib directory.

4. If your provider needs any additional Java classes not contained in a JAR file, add them to the WEB-INF/classes directory. Make sure that you save the class file in a directory structure that corresponds to their Java package names.

5. Add any static HTML files, JSPs and images to your working directory. Create subdirectories as needed to organize the files. Note that the subdirectories will become part of the path necessary to access the HTML or JSP files.

6. Create a subdirectory for your provider under the providers directory.

7. Copy the _default.properties file to service_name.properties and edit it to reflect your provider's configuration.

8. Set the definition value in the provider_name.properties file that is available in the WEB-INF/deployment folder, as follows:

definition=providers/provider_dir_you_created/provider.xml

9. Place your provider definition file in the subdirectory you just created.

10. Edit _default.properties to reflect the configuration settings of your default provider. The default provider is accessed if a service identifier is not specified in a request. Refer to Section D.2.1.2, "Specifying Your Default Service" for more information on this step.

11. If you use servlets to render content, edit WEB-INF/web.xml to add your servlets to the list of pre-defined servlets. Be careful not to remove the entries for servlets required by PDK-Java.

D.2.1.2 Specifying Your Default Service

The default service is the provider that receives any request without a service name. You specify a default provider by editing the _default.properties file in the deployment directory of your WAR file.

Edit the definition entry to point to the provider definition file that represents your default provider. Paths should be relative to the WEB-INF directory within your WAR file, not the physical location of the file in the file system.

The _default.properties file looks similar to the following:

serviceClass=oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter
loaderClass=oracle.portal.provider.v2.http.DefaultProviderLoader
showTestPage=true
definition=providers/sample/provider.xml
autoReload=true

D.2.1.3 Creating Your WAR File

Once you have specified the contents of your WAR file, you are ready to create the WAR file itself. To create the WAR file, perform the following steps:

1. Zip the contents of the working directory you created in Section D.2.1.1, "Preparing Your Directories", including the subdirectory paths but not the working directory path itself.

2. Rename the resulting file to give it a meaningful name and change the extension to .war.

D.2.1.4 Creating Your EAR File

To create the EAR file manually, perform the following steps:

1. Create another working directory for the creation of your EAR file.

2. Extract the template.ear file from /pdk/jpdk/v2/template.ear into your working directory. Make sure that you extract the file paths, too.

3. Open the META-INF/application.xml file that was contained in the template EAR file. It should look something like the following:

<?xml version "1.0">
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.
//DTD J2EE Application 1.3//EN"
"http://java.sun.com/j2ee/dtds/application_1_3.dtd">
<application>
<display-name>Display Name of the Application</display-name>
<description>Description of the application</description>
<module>
<web>
<web-uri>yourwarfile.war</web-uri>
<context-root>/</context-root>
</web>
</module>
</application>

Table D-1 describes the elements of application.xml.

Table D-1 Elements of application.xml

Element

Description

<display-name>

Is the name of the application.

<description>

Is a description of the application and its functions.

<web-uri>

Is the name of your WAR file.

<context-root>

Is the prefix you would like to map to your application by default (for example, /myapp).

4. Save application.xml back to the same location without changing the name of the file.

5. Copy the WAR file you created earlier into your working directory. Put it in the working directory itself, not a subdirectory.

6. Zip the contents of the working directory, including the subdirectory paths but not the working directory path itself.

7. Rename the resulting file to give it a meaningful name and change the extension to .ear.

D.2.2 Deploying Your EAR File Using Fusion Middleware Control

You can deploy your EAR file to your WebLogic Managed Server (WLS_PORTAL) using Fusion Middleware Control. To deploy the EAR file:

1. Start the Oracle Fusion Middleware Control and navigate to the home page of the Portal instance in which you configured PDK-Java (for example, WLS_PORTAL).

2. From the WebLogic Server menu, choose Application Deployment, and then Deploy.
The Select Archive page is displayed.

3. In the Archive or Exploded Directory section, you can select one of the following:

- Archive is on the machine where this browser is running. Then, enter the location of the archive or click Browse to find the archive file.

- Archive or exploded directory is on the server where Enterprise Manager is running. Then, enter the location of the archive or click Browse to find the archive file.

4. Click Continue. The URL mapping for Web Modules displays. The mappings will default to the context roots specified in application.xml (for example, /myapp), but you can change them to avoid clashing with the context roots of other deployed applications.

5. In the Deployment Plan section, you can select one of the following:

- Automatically create a new deployment plan.

- Deployment plan is on the machine where this web browser is running. If you select this option, enter the path to the plan.

- Deployment plan is on the server where Enterprise Manager is running. I If you select this option, enter the path to the plan.

6. Click Next.
The Select Target page is displayed.

7. Select the target to which you want to deploy the application. The Administration Server, Managed Servers, and clusters are listed. You can select a cluster, one or more Managed Server in the cluster, or a Managed Server that is not in a cluster. Although the Administration Server is shown in the list of targets, you should not deploy an application to it. The Administration Server is intended only for administrative applications such as the Oracle WebLogic Server Administration Console.

8. Click Next.
The Application Attributes page is displayed.

9. In the Application Attributes section, for Application Name, enter the application name.

10. In the Context Root of Web Modules section, if the web module does not have the context root configured in the application.xml file, you can specify the context root for your application. The context root is the URI for the web module. Each web module or EJB module that contains web services may have a context root.

11. If the application's adf-config.xml file archive contains MDS configuration, the Target Metadata Repository section is displayed. It allows you to choose the repository and partition for this application:

- To change the repository, click the icon next to the Repository Name. In the Metadata Repositories dialog box, select the repository and click OK.

- To change the partition, enter the partition name in Partition Name.

12. In the Distribution section, you can select one of the following:

- Distribute and start application (servicing all requests)

- Distribute and start application in admin mode (servicing only admin requests)

- Distribute only

13. Click Next.
The Deployment Wizard, Deployment Settings page is displayed.

14. On this page, you can perform common tasks before deploying your application or you can edit the deployment plan or save it to a disk. You can:

- Configure Web modules

- Configure application security

15. Expand Deployment Plan.
You can edit and save the deployment plan, if you choose.

16. Click Deploy.
Application Server Control displays processing messages.

17. When the deployment is completed, click Close.

D.2.3 Testing Deployment

To test your provider deployment, you access the provider test page with a URL of the following form:

http://host:port/context_root/providers

where:

host and port are the host name and port number of the HTTP listener for your target Oracle WebLogic Server instance. In an Oracle Application Server installation with Oracle Web Cache installed, port should be the Oracle Web Cache listener port (for example, 8090). In the Oracle WebLogic Server installation, the default HTTP port number is 8888.

context_root is the URI path prefix you mapped to the provider Web application on deployment (for example, /myapp) or the default one specified in application.xml in the case of a manual deployment with dcmctl.

For example:

http://my.host.com:8090/newProvider/providers

If your.properties file specifies showTestPage=true, you should see the familiar test page for your default provider. To view the test page for a specific provider service, you can append the service name to the URL. For example:

http://my.host.com:8090/newProvider/providers/myService

D.2.4 Setting Deployment Properties

In PDK-Java, you can specify a number of deployment properties through JNDI variables. Table D-2 provides a list of these variables with descriptions.

Table D-2 JNDI Variables for Provider Deployment

Variable

Description

oracle/portal/provider/global/log/logLevel

Is the logging level (0-8) used by PDK-Java and applies to all providers.

oracle/portal/service_name/showTestPage

Is a Boolean flag that specifies whether a provider's test page is accessible. The default value is true.

oracle/portal/service_name/maxTimeDifference

Is the provider's HMAC time difference.

oracle/portal/service_name/definition

Is the location of the provider's definition file, provider.xml.

oracle/portal/service_name/autoReload

Is a Boolean auto reload flag. The default value is true.

oracle/portal/service_name/sharedKey

Is the HMAC shared key. It has no default value.

oracle/portal/service_name/rootDirectory

Is the location for provider customizations. It has no default value.

Setting the Variables

You can set the values of the variables in Table D-2 as you would any other JNDI variables. Refer to Section 7.2.4.2, "Setting JNDI Variable Values" for information on how to set JNDI variables.

D.2.5 Securing Your Provider

When using the PDK-Java framework in a production environment, you should secure your providers. For more information on securing providers, refer to Section 7.2.7, "Implementing Portlet Security" and the Oracle Fusion Middleware Administrator's Guide for Oracle Portal.

D.2.6 Registering Your Provider

Once you have successfully deployed and verified your provider, you can register it as you would any other provider. Refer to Section 6.5.5, "Registering and Viewing Your Oracle PDK-Java Portlet" for more information about registering your provider.

E Oracle Portal Provider Test Suite

The Oracle Portal Provider Test Suite performs sanity, performance, and unit tests on a Web provider without an installation of Oracle Portal or Internet access from the provider machine. The following two types of utilities are available to the user in the test suite:

- Section E.1, "Provider Test Page"

- Section E.2, "Test Harness"

You can download the Oracle Portal Provider Test Suite from the Oracle Portal Developer Kit (PDK) page on Oracle Technology Network (OTN):

http://www.oracle.com/technology/products/ias/portal/pdk.html

From the Oracle Portlet Developer Kit (PDK) home page, select Download the PDK-Java TestSuite.

E.1 Provider Test Page

The provider test page provides a basic sanity test for the provider. It contains a list of portlets, servlet initialization arguments, and the version numbers of the ptlshare and pdkjava libraries. The provider test page is the simplest utility available for testing any Web provider. You access the test page by a URL after deploying the enterprise application or Web application on Oracle WebLogic Server. You test the Web provider by accessing this URL from a browser:

http://server:port/application_name/providers/provider_name

For example, the PDK-Java comes with a sample application and portlets. The application is encapsulated in a WAR file, which in turn is encapsulated in an EAR file. When you deploy it, Oracle WebLogic Server extracts the files and creates a directory structure with the sample portlets under:

MW_HOME\user_projects\domains\<DomainName>\servers\WLS_PORTAL\tmp\_WL_user\jpdk

To view the test page for this provider, you would use this URL:

http://server:port/jpdk/providers/sample

When you access the test page, the SOAP servlet validates the XML provider definition, provider.xml, ensuring that the corresponding provider is well formed. This validation is useful for debugging deployment issues with your provider before attempting to register it with a Oracle Portal. If you successfully deploy your Web application on WLS, you receive a success message on the test page.

You can turn the test page on and off by using the JNDI variable oracle/portal/provider/provider_name/showTestPage to true or false. Once a provider is tested and in service you might want to restrict access to the test page. For more information about retrieving and setting JNDI variables, refer to Section 7.2.4, "Using JNDI Variables".

E.2 Test Harness

The test harness is a command line utility for unit- and performance-testing your providers without accessing an Oracle Portal instance. The test harness sends HTTP requests to the target Web provider and records the responses for further analysis. The responses are logged into an XML file. Performance statistics are logged into another file for analysis.

The test harness provides considerable flexibility in the following ways:

- You create your own test definition. Based on the information in the test definition, the harness sends requests to the provider. The test definition file is in XML format and lists request instances to send to the target Web provider.

- The information returned by the provider is stored in a standard XML file, which makes it easier to understand and analyze.

- You can perform load testing of the Web provider.

E.2.1 Test Definition File

The test definition file is an XML file that lists the request instances for a particular test. You can optionally subdivide the request instances into request groups within the test definition file. You can include the details of the request instances in the test definition file or refer to a request library XML file that defines the instance details.

In addition to the request instances, the test definition file also includes information about the host and port of the target Web provider and any pre-processors to which it needs to be sent. A pre-processor enables you to include application-specific logic in the request instances at runtime in the test harness. For example, a pre-processor might check the validity of XML in the SOAP messages being sent to the target Web provider. The test harness provides the following three built-in pre-processors:

- Oracle Portal pre-processor

- Validation-based caching pre-processor

- HMAC (Hashed Message Authentication Checksum) pre-processor

The following sample test definition file illustrates the format and content of the file:

<?xml version="1.0" encoding="ISO-8859-1"?>
<?testDefinition version="0.1"?>
<testDefinition>
<defaultHost>machine.name.com</defaultHost>
<defaultPort>80</defaultPort>
<defaultPath>/jpdk/providers/sample</defaultPath>
<property name="portletId" value="1"/>
<preProcessorDefinitions>
<preProcessor
class="oracle.webdb.testharness.preprocessor.PortalPreProcessor">
<name>portal</name>
</preProcessor>
<preProcessor class="oracle.webdb.testharness.preprocessor.HMACPreProcessor">
<name>hmac</name>
<sharedKey>1234567890aBcDeFgHiJ</sharedKey>
</preProcessor>
</preProcessorDefinitions>
<requestGroup id="register">
<description>Carries out necessary registrations</description>
<cycles>1</cycles>
<threads>1</threads> -- increase the number to load test the Web provider.
<requestInstance id="register_provider">
<libraryId>ptl902</libraryId>
<definitionId>registerProvider</definitionId>
<runs>1</runs>
</requestInstance>
<requestInstance id="register_portlet">
<libraryId>ptl902</libraryId>
<definitionId>registerPortlet</definitionId>
<runs>1</runs>
</requestInstance>
</requestGroup>
<requestGroup id="show">
<description>Carries out work necessary to show the portlet</description>
...
...
</requestGroup>
...
</testDefinition>

E.2.2 runTest Command

The runTest command invokes the test harness with the specified options using the specified test definition.

runTest options test_definition

Table E-1 describes the command options for runTest.

Table E-1 runTest Options

Option

Description

-n testname

Assigns the specified name to this run. Defaults to a date-time name.

-g groupId

Is a comma separated list of the identifiers of the request groups in the test definition file to be run for this test. To run all groups, specify --all-groups.

-p perfLogFile

Is the name of the performance log file. Defaults to the test name. To disable performance testing, use --no-perf.

-l resLogFile

Is the name of the response log file. Defaults to the test name.

-v resLogLevel

Is the level of response logging (MIN | HEADERS | ALL). Default is ALL.

-c csvFile

Is the name of the response data CSV file. Default is to not generate it.

-s ctlFile

Is the name of the response data ctl file. Default is to not generate it.

--no-perf

Switches off all logging of performance data.

--all-groups

Runs all groups in the test definition.

-verbose

Produces verbose informational logging.

E.2.3 Running a Test with Test Harness

In order to test Web providers using the test harness, do the following:

1. Extract the pdktestsuite.zip file to a convenient location. This will create a directory called pdk\testsuite\pdktest to which all the test harness files are extracted.

2. Set an environment variable called PDKTEST_HOME to point to the location created in the previous step. For example, if you extracted to your D drive, you would now have a directory called D:\pdk\testsuite\pdktest. Set the value of PDKTEST_HOME, to D:\pdk\testsuite\pdktest. The Test Harness provides executable scripts in the bin directory.

3. Create a test definition file similar to the one in Section E.2.1, "Test Definition File".

4. Invoke the runTest command as described in Section E.2.2, "runTest Command".

F Content Management APIs and Views

This appendix lists the supported Oracle Portal content management APIs and views. It contains the following sections:

- Section F.1, "Supported APIs"

- Section F.2, "Secure Views"

F.1 Supported APIs

This section provides an overview of the APIs available to you for performing content management tasks.

For more information about the contents of the different packages, refer to the Oracle Portal PL/SQL API Reference on Portal Center:

http://portalcenter.oracle.com

In the Portal Focus Areas section, click Portlet Development, then in the APIs and References section, click PL/SQL API Reference.

F.1.1 The WWSBR_API Package

This package contains APIs for accessing and manipulating the contents in the portal schema of the MDS Repository. You can perform the following actions using these APIs:

- Create, edit, and delete portal objects, such as pages, categories, and items.

- Copy and move items and pages.

- Check items in and out.

- Approve or reject pending items.

F.1.2 The WWSRC_API Package

This package contains APIs for searching content in the MDS Repository. You can perform the following actions using these APIs:

- Search for items, pages, categories, and perspectives.

- Filter search results based on specific attribute values.

- Return search results as an XML document.

F.1.3 The WWSEC_API Package

This package contains APIs for administering Oracle Portal security. You can perform the following actions using these APIs:

- User maintenance (create user profile entries, activate portal access, update user properties, delete user profile entries, and other associated tasks).

- Group maintenance (create, activate, update, delete groups, and other associated tasks).

- Access control (grant, check, copy, update, remove user/group privileges, and other associated tasks).

F.1.4 The WWCTX_API Package

This package contains APIs for enabling access to a session context. These APIs provide the methods necessary to manage a session context for a specific user.

A session is established when a user accesses the portal. A public session is created upon initial access. It is converted to an authenticated session after the user logs in and exists until the user logs out. Old sessions are also periodically cleaned up by the portal.

F.1.5 The WWPRO_API_INVALIDATION Package

This package contains APIs for invalidating content cached in the Oracle Web Cache. Use these APIs when your code causes content to change to make sure that those changes are immediately visible to users. For example, you may need to call an API to invalidate the cache in code that adds an item to a page.

F.2 Secure Views

The views in wwsbr_api_views enable you to safely build custom queries against the portal schema of the MDS Repository, without having to worry about the definitions changing between releases. Table F-1 lists the currently supported views:

Table F-1 Secure Content Repository Views

View

Description

WWSBR_ALL_CATEGORIES

Describes all categories.

WWSBR_ALL_CONTENT_AREAS

Describes all page groups.

WWSBR_ALL_FOLDER_REGIONS

Describes all page regions on pages that the current user is able to view.

WWSBR_ALL_FOLDERS

Describes pages on which the current user has View privileges or higher.

WWSBR_ALL_ITEMS

Describes the items that the current user is able to view.

WWSBR_ALL_NAVIGATION_BARS

Describes all navigation pages that the current user is able to view.

WWSBR_ALL_PERSPECTIVES

Describes all perspectives.

WWSBR_ALL_STYLES

Describes all styles.

WWSBR_APPROVER

Describes the approvers for every page group approval step.

WWSBR_ATTRIBUTES

Describes all attributes.

WWSBR_CONTENT_AREA_APPROVAL

Describes the approval definition for a page group.

WWSBR_CONTENT_AREA_ITEM_TYPES

Describes which item types are available to which page groups.

WWSBR_FOLDER_ATTRIBUTES

Describes the attributes associated with pages that the current user is able to view

WWSBR_FOLDER_PERSPECTIVES

Describes the perspectives associated with pages that the current user is able to view.

WWSBR_FOLDER_TYPE_ATTRIBUTES

Describes the attributes that are available within each page type.

WWSBR_FOLDER_TYPES

Describes all page types.

WWSBR_ITEM_APPROVAL

Describes item approval information for every item that goes through approval.

WWSBR_ITEM_ATTRIBUTES

Describes the attributes and attribute values associated with items that the current user is able to view.

WWSBR_ITEM_PERSPECTIVES

Describes the perspectives associated with items that the current user is able to view.

WWSBR_ITEM_TYPE_ATTRIBUTES

Describes the attributes that are available within each item type.

WWSBR_ITEM_TYPES

Describes all item types.

WWSBR_SUBSCRIPTION

Describes user subscription to portal pages and items.

WWSBR_USER_FOLDERS

Describes pages on which the current user has Manage privileges or higher.

WWSBR_USER_PAGES

Describes pages on which the current user has Manage privileges or higher.

Note:

In the following tables, an asterisk (*) indicates that the column is part of the view's primary key.

F.2.1 WWSBR_ALL_CATEGORIES

Table F-2 lists the columns in the WWSBR_ALL_CATEGORIES view, which describes all categories.

Table F-2 WWSBR_ALL_CATEGORIES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the category.

CAID*

NOT NULL

NUMBER

Page group ID for the category.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

PARENTID

NUMBER

ID of the parent category.

0 (zero) if the category has no parent.

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

VARCHAR2(60)

Internal name of the category. Unique within parent category.

DISPLAY_NAME

NOT NULL

VARCHAR2(240)

Display name, or title, of the category.

F.2.2 WWSBR_ALL_CONTENT_AREAS

Table F-3 lists the columns in the WWSBR_ALL_CONTENT_AREAS view, which describes all page groups. This view shows all page groups in the repository, regardless of the current user's privileges.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME and LANGUAGE columns.

Table F-3 WWSBR_ALL_CONTENT_AREAS

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the page group.

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

NOT NULL

VARCHAR2(60)

Internal name of the page group.

DISPLAY_NAME

VARCHAR2(256)

Display name, or title, of the page group.

DEFAULT_LANGUAGE

NOT NULL

VARCHAR2(30)

Language code for the default language of the page group.

F.2.3 WWSBR_ALL_FOLDER_REGIONS

Table F-4 lists the columns in the WWSBR_ALL_FOLDER_REGIONS view, which describes all page regions on pages viewable by the current user.

Table F-4 WWSBR_ALL_FOLDER_REGIONS

Column

Null?

Data Type

Description

Notes

ID*

NUMBER(38)

ID of the region.

DISPLAY_NAME*

VARCHAR2(4000)

Display name, or title, of the region.

LANGUAGE

VARCHAR(7)

Language code.

FOLDER_ID

NUMBER(38)

ID of the page containing the region.

Foreign key to:

- WWSBR_ALL_FOLDERS.ID

- WSBR_USER_FOLDERS.ID

FOLDER_CAID

NUMBER(38)

Page group ID for the page containing the region.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

PARENT_ID

NUMBER(38)

ID of the parent region, if the region is nested.

TYPE

VARCHAR2(30)

The region type.

Valid values:

- NONE - undefined

- TAB - tab region

- SUBPAGE - sub page region

- ITEM - item region

- PORTLET - portlet region

SEQ

NUMBER

Sequence of a region within the parent region.

ALLOW_CONTENT

NUMBER

Indicates if the region allows content to be added.

Valid values:

- 0 - does not allow content to be added

- 1 - allows content to be added

F.2.4 WWSBR_ALL_FOLDERS

Table F-5 lists the columns in the WWSBR_ALL_FOLDERS view, which describes the pages on which the current user has View privileges or higher.

Table F-5 WWSBR_ALL_FOLDERS

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

Unique identifier of the page within the page group.

CAID*

NOT NULL

NUMBER

ID of the page group.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

PARENT_ID

NUMBER

ID of the parent page.

0 (zero) if root page of the page group.

NAME

NOT NULL

VARCHAR2(60)

Internal name of the page.

Must be unique within the parent page.

DISPLAY_NAME

NOT NULL

VARCHAR2(256)

Display name, or title, of the page.

CATEGORY_ID

NUMBER

ID of the category assigned to the page.

Foreign key to WWSBR_ALL_CATEGORIES.ID

CATEGORY_SITEID

NUMBER

Page group ID for the category assigned to the page.

Foreign key to WWSBR_ALL_CATEGORIES.CAID

DESCRIPTION

VARCHAR2(2000)

Description of the page.

TYPE_ID

NOT NULL

NUMBER

ID of the page type.

Foreign key to WWSBR_FOLDER_TYPES.ID

TYPE_SITEID

NOT NULL

NUMBER

Page group ID for the page type.

Foreign key to WWSBR_FOLDER_TYPES.CAID

BASE_TYPE_ID

NOT NULL

NUMBER

The ID of the page base type

Foreign key to WWSBR_FOLDER_TYPES.ID where WWSBR_FOLDER_TYPES.IS_BASE_FOLDER_TYPE=1

IS_PORTLET

NOT NULL

NUMBER(1)

Indicates if the page is published as a portlet.

Valid values:

- 0 - not a portlet

- 1 - is a portlet

IS_CACHING_ON

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

CACHE_MODE

NUMBER(1)

The caching mode for the page.

Valid values:

- 2 - no caching

- 1 - cache page definition only

- 0 - cache page definition and content for x minutes

- 4 - cache page definition only at system level

- 3 - cache page definition and content at system level for x minutes

SUB_FOLDER_SEQUENCE

NUMBER

The sequence (order) of the page in its parent page's sub-page region.

DISPLAY_IN_PARENT_FOLDER

NOT NULL

NUMBER(1)

Indicates if the page is displayed in its parent page's sub page region.

ITEMVERSIONING

VARCHAR2(30)

Determines the level of item versioning for the page.

Valid values:

- versionnone - no versioning

- versionsimple - simple versioning

- versionaudit - audit versioning.

STYLE_ID

NOT NULL

NUMBER

ID for the style used by the page.

Foreign key to WWSBR_ALL_STYLES.ID

STYLE_CAID

NOT NULL

NUMBER

Page group ID for the style used by the page.

Foreign key to WWSBR_ALL_STYLES.CAID

URL_VALUE

VARCHAR2(4000)

URL value for a URL type page.

SEARCH_VALUE

VARCHAR2(2000)

DEPRECATED. This column is retained for backward compatibility only.

PLSQL_VALUE

VARCHAR2(2000)

PL/SQL value for a PL/SQL page.

IMAGE

VARCHAR2(350)

Unique name of the image associated with the page.

Matches the NAME column in the document table.

TITLE_IMAGE_NAME

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

ROLLOVER_IMAGE_NAME

VARCHAR2(350)

The unique name of the rollover image associated with the page.

Matches the NAME column in the document table.

BANNER_IMAGE_NAME

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

NAVIGATION_BAR_ID

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

NAVIGATION_BAR_CAID

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

IS_PUBLIC

NOT NULL

NUMBER(1)

Indicates that the page is viewable by public users.

Valid values:

- 0 - not public

- 1 - is public

ITEM_LEVEL_SECURITY

NOT NULL

NUMBER(1)

Indicates that item level security is enabled for the page.

Valid values:

- 0 - ILS disabled

- 1 - ILS enabled

DISPLAY_FULL_SCREEN

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

PLSQL_FOLDER_EXECUTOR

VARCHAR2(30)

For PL/SQL type pages, the database schema used to execute the PL/SQL code.

CREATEDATE

DATE

Date the page was created.

CREATOR

VARCHAR2(256)

User name of the person who created the page.

UPDATEDATE

DATE

Date the page was last updated.

UPDATOR

VARCHAR2(256)

User name of the person who last updated the page.

F.2.5 WWSBR_ALL_ITEMS

Table F-6 lists the columns in the WWSBR_ALL_ITEMS view, which describes the items viewable by the current user.

For an example of how to use this view, refer to Section 10.3.4, "Finding an Item ID".

Table F-6 WWSBR_ALL_ITEMS

Column

Null?

Data Type

Description

Notes

MASTERID

NOT NULL

NUMBER

Master ID of the item.

All versions and translations of an item have the same master ID.

ID*

NOT NULL

NUMBER

ID of the item.

Each version of an item receives a new ID. If translations and approvals are enabled, multiple rows may exist for the same ID.

CAID*

NOT NULL

NUMBER

Page group ID for the item.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

- WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

IS_CURRENT_VERSION*

NOT NULL

NUMBER(1)

Indicates that the item is the current version.

Valid values:

- 0 - not current version

- 1 - is current version

FOLDER_ID

NOT NULL

NUMBER

ID of the page containing the item.

Foreign key to:

- WWSBR_ALL_FOLDERS.ID

- WWSBR_USER_FOLDERS.ID

- WWSBR_ALL_FOLDER_REGIONS.FOLDER_ID

FOLDER_REGION_ID

NOT NULL

NUMBER

ID of the region containing the item.

Foreign key to WWSBR_ALL_FOLDER_REGIONS.ID

NAME

NOT NULL

VARCHAR2(256)

Internal name of the item.

The name is a system generated GUID value that can be used as an alternate ID. The name is also used in path based URLs.

DISPLAY_NAME

VARCHAR2(256)

Display name, or title, of the item.

ITEMTYPE

NOT NULL

VARCHAR2(30)

The base item type, for example, BASEFILE, BASETEXT, BASEURL, and so on.

SUBTYPE

VARCHAR2(40)

ID of the item type.

Foreign key to WWSBR_ITEM_TYPES.ID

SUBTYPE_CAID

NUMBER

Page group ID of the item type.

Foreign key to WWSBR_ITEM_TYPES.CAID

PARENT_ITEM_ID

NUMBER

ID of the parent item, if the item is a sub item.

0 (zero) if the item is not a sub item.

CATEGORY_ID

NUMBER

ID for the category assigned to the item.

Foreign key to WWSBR_ALL_CATEGORIES.ID

CATEGORY_CAID

NUMBER

page group ID for the category assigned to the item.

Foreign key to WWSBR_ALL_CATEGORIES.CAID

AUTHOR

VARCHAR2(50)

Author of the item.

DESCRIPTION

VARCHAR2(2000)

Description of the item.

PUBLISH_DATE

NOT NULL

DATE

Date the item will be published.

EXPIREMODE

VARCHAR2(90)

Expiration mode for the item.

Valid values:

- 'PERMANENT' - item never expires

- 'NUMBER' - item expires in EXPIRENUMBER days from CREATEDATE

- 'DATE' - item expires on EXPIREDATE

EXPIRENUMBER

NUMBER

Number of days after CREATEDATE when item will expire.

Only valid when EXPIREMODE = 'NUMBER'.

EXPIREDATE

DATE

Date when item will expire.

Only valid when EXPIREMODE = 'DATE'.

IMAGE

VARCHAR2(350)

Image associated with the item.

This value may be a reference (for example, a path to an image stored on the file system or in the content repository) or a unique document name that matches the NAME column in the document table.

KEYWORDS

VARCHAR2(2000)

Keywords for the item.

URL

VARCHAR2(4000)

URL for a URL type item.

FILENAME

VARCHAR2(350)

Unique name of the file associated with a file type item.

Matches the NAME column in the document table.

TEXT

CLOB

Text for a text type item.

FOLDER_LINK_ID

NUMBER

Page ID for a page link type item

Foreign key to:

- WWSBR_ALL_FOLDERS.ID

- WWSBR_USER_FOLDERS.ID

FOLDER_LINK_CAID

NUMBER

Page group ID for a page link type item.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

ACTIVE*

NOT NULL

NUMBER(1)

Indicates the active status of the item.

Valid values:

- 1 - active

- 2 - pending approval as new and current version

- 3 - pending approval as new but not current version

- 0 - pending approval

- -1 - deleted

- -7 - rejected

- -9 - reject deleted

CAN_BE_CHECKEDOUT

NUMBER(1)

Indicates if the item can be checked out.

Valid values:

- 0 - cannot be checked out

- 1 - can be checked out

IS_ITEM_CHECKEDOUT

NUMBER(1)

Indicates if the item is checked out.

Valid values:

- 0 - item is not checked out

- 1 - item is checked out

CHECKER_USERNAME

VARCHAR2(256)

User name of the user who checked out the item.

CHECKOUT_DATE

DATE

Date the item was checked out.

FULLSCREEN

NOT NULL

NUMBER(1)

Indicates the rendering behavior for an item shown as a link.

Valid values:

- 0 - clicking the link displays the item in a new browser window

- 1 - clicking the link displays the item in the same browser window

INPLACE

NOT NULL

NUMBER(1)

Indicates the rendering behavior for a text or PL/SQL item.

Valid values:

- 0 - a link to the item is displayed; the rendering behavior of the link depends on the value of the FULLSCREEN column

- 1 - the item is rendered in-place in the region

CREATEDATE

NOT NULL

DATE

Date the item was created.

CREATOR

NOT NULL

VARCHAR2(256)

User name of the person who created the item.

UPDATEDATE

DATE

Date the item was last updated.

UPDATOR

VARCHAR2(256)

User name of the person who last updated the item.

SECURITY

VARCHAR2(25)

Indicates whether security has been set for the item.

Valid values:

- item - ILS is enabled on the page and security is set at the item level

- folder - security is set at the page level

VISIBLE

NOT NULL

NUMBER(1)

Indicates whether the item is hidden.

Valid values:

- 0 - item is hidden

- 1 - item is shown

SEQUENCE

NOT NULL

NUMBER

Regular sequence of the item if there is no grouping.

CATEGORY_SEQUENCE

NOT NULL

NUMBER

Sequence of the item when items are grouped by category.

AUTHOR_SEQUENCE

NOT NULL

NUMBER

Sequence of the item when items are grouped by author.

CREATE_DATE_SEQUENCE

NOT NULL

NUMBER

Sequence of the item when items are grouped by create date.

ITEMTYPE_SEQUENCE

NOT NULL

NUMBER

Sequence of the item when items are grouped by item type.

F.2.6 WWSBR_ALL_NAVIGATION_BARS

Table F-7 lists the columns in the WWSBR_ALL_NAVIGATION_BARS view, which describes all navigation pages viewable by the current user.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME, CAID, and LANGUAGE columns.

Table F-7 WWSBR_ALL_NAVIGATION_BARS

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the navigation page.

CAID*

NOT NULL

NUMBER

Page group ID for the navigation page.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

NOT NULL

VARCHAR2(60)

Internal name of the navigation page.

Unique within page group.

DISPLAY_NAME

NOT NULL

VARCHAR2(256)

Display name, or title, of the navigation page.

STYLE_ID

NOT NULL

NUMBER

ID for the style used by the navigation page.

Foreign key to WWSBR_ALL_STYLES.ID

STYLE_CAID

NOT NULL

NUMBER

Page group ID for the style used by the navigation page.

Foreign key to WWSBR_ALL_STYLES.CAID

IS_PORTLET

NOT NULL

NUMBER(1)

Indicates if the page is published as a portlet.

Valid values:

- 0 - not a portlet

- 1 - is a portlet

ALIGNMENT

VARCHAR2

DEPRECATED. This column is retained for backward compatibility.

F.2.7 WWSBR_ALL_PERSPECTIVES

Table F-8 lists the columns in the WWSBR_ALL_PERSPECTIVES view, which describes all perspectives.

Table F-8 WWSBR_ALL_PERSPECTIVES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the perspective.

CAID*

NOT NULL

NUMBER

Page group ID for the perspective.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

PARENTID

NUMBER

ID of the parent perspective.

0 (zero) if the perspective has no parent

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

VARCHAR2(60)

Internal name of the perspective.

Unique within parent perspective.

DISPLAY_NAME

NOT NULL

VARCHAR2(240)

Display name, or title, of the perspective.

F.2.8 WWSBR_ALL_STYLES

Table F-9 lists the columns in the WWSBR_ALL_STYLES view, which describes all styles.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME, CAID, and LANGUAGE columns.

Table F-9 WWSBR_ALL_STYLES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the style.

CAID*

NOT NULL

NUMBER

Page group ID for the style.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

NOT NULL

VARCHAR2(65)

Internal name of the style.

Unique within the page group.

DISPLAY_NAME

VARCHAR2(350)

Display name, or title, of the style.

F.2.9 WWSBR_APPROVER

Table F-10 lists the columns in the WWSBR_APPROVER view, which describes the approvers for every page group approval step. The STEP_ID column corresponds to the STEP_ID column in the WWSBR_CONTENT_AREA_APPROVAL view. For every step, there could be one or more approvers. An approver can be a user or group and this information is stored in the APPROVER_TYPE column.

Table F-10 WWSBR_APPROVER

Column

Null?

Data Type

Description

Notes

ID

NOT NULL

NUMBER

Internal ID, unique to each row.

Foreign key to WWSBR_CONTENT_AREA_APPROVAL.ID

STEP_ID*

NOT NULL

NUMBER

Sequential step ID of an approval process.

APPROVER_ID*

NOT NULL

NUMBER

User ID of the approver.

APPROVER_TYPE*

NOT NULL

VARCHAR2(10)

The type of the approver.

Valid values:

- USER - approver is a user

- GROUP - approver is a group

F.2.10 WWSBR_ATTRIBUTES

Table F-11 lists the columns in the WWSBR_ATTRIBUTES view, which describes all attributes.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME, CAID, and LANGUAGE columns.

Table F-11 WWSBR_ATTRIBUTES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the attribute.

CAID*

NOT NULL

NUMBER

Page group ID for the attribute.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

NOT NULL

VARCHAR2(256)

Internal name of the attribute.

Functions as alternate key (unique within page group).

DISPLAY_NAME

VARCHAR2(256)

Display name, or title, of the attribute.

IS_BASE_ATTRIBUTE

NOT NULL

NUMBER(1)

Indicates that the attribute is a base attribute.

Valid values:

- 0 - not a base attribute

- 1 - is a base attribute

DATA_TYPE

NOT NULL

VARCHAR2(30)

Data type of the attribute.

LENGTH

NUMBER(5)

Length of the attribute.

IS_TRANSLATABLE

NOT NULL

NUBMER(1)

Indicates that the attribute is translatable, meaning that a different value can be stored for each translation. If the attribute is not translatable, the same value is stored for all translations.

Valid values:

- 0 - not translatable

- 1 - is translatable

F.2.11 WWSBR_CONTENT_AREA_APPROVAL

Table F-12 lists the columns in the WWSBR_CONTENT_AREA_APPROVAL view, which describes the approval definition for a page group or a page. For every approval definition there are x rows corresponding to the x steps defined in the approval process. To determine the approvers for each step, see the WWSBR_APPROVER view.

Table F-12 WWSBR_CONTENT_AREA_APPROVAL

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the approval process

STEP_ID

NUMBER

ID of the step in the approval process

CAID

NOT NULL

NUMBER

ID of the page group against which the approval process is defined.

FOLDER_ID

NUMBER

ID of the page against which the approval process is defined.

ALL_OR_ANY

VARCHAR2(10)

Indicates if all the approvers need to approve the item for it to be published, or just one.

Valid values:

- ALL - all approvers must approve the item

- ANY - only one approver needs to approve the item

PARALLEL_OR_SERIAL

VARCHAR2(10)

Indicates if all the approvers are notified at the same time, or one after the other.

Valid values:

- P - all approvers are notified at the same time

- S - approvers are notified one after the other

F.2.12 WWSBR_CONTENT_AREA_ITEM_TYPES

Table F-13 lists the columns in the WWSBR_CONTENT_AREA_ITEM_TYPES view, which describes which item types are available to which page groups. An item type cannot be assigned to an item unless the item type is available within the item's page group.

Table F-13 WWSBR_CONTENT_AREA_ITEM_TYPES

Column

Null?

Data Type

Description

Notes

CAID*

NOT NULL

NUMBER

ID of the page group.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

ITEM_TYPE_ID*

NOT NULL

NUMBER

ID of the item type.

Foreign key to WWSBR_ITEM_TYPES.ID

ITEM_TYPE_CAID*

NOT NULL

NUMBER

Page group ID for the item type.

Foreign key to WWSBR_ITEM_TYPES.CAID

F.2.13 WWSBR_FOLDER_ATTRIBUTES

Table F-14 lists the columns in the WWSBR_FOLDER_ATTRIBUTES view, which describes the attributes associated with pages viewable by the current user.

Table F-14 WWSBR_FOLDER_ATTRIBUTES

Column

Null?

Data Type

Description

Notes

FOLDER_CAID*

NOT NULL

NUMBER

Page group ID of the page.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

FOLDER_ID*

NOT NULL

NUMBER

ID of the page.

Foreign key to:

- WWSBR_ALL_FOLDERS.ID

- WWSBR_USER_FOLDERS.ID

ATTRIBUTE_ID*

NUMBER

ID of the attribute.

Foreign key to WWSBR_ATTRIBUTES.ID

ATTRIBUTE_CAID*

NUMBER

Page group ID for the attribute.

Foreign key to WWSBR_ATTRIBUTES.CAID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

Foreign key to:

- WWSBR_ALL_FOLDERS.LANGUAGE

- WWSBR_USER_FOLDERS.LANGUAGE

- WWSBR_ATTRIBUTES.LANGUAGE

VALUETYPE

NOT NULL

VARCHAR2(30)

Data type of the attribute.

VALUE

VARCHAR2(2000)

Value of the attribute.

F.2.14 WWSBR_FOLDER_PERSPECTIVES

Table F-15 lists the columns in the WWSBR_FOLDER_PERSPECTIVES view, which describes the perspectives associated with pages viewable by the current user.

Table F-15 WWSBR_FOLDER_PERSPECTIVES

Column

Null?

Data Type

Description

Notes

FOLDER_CAID*

NOT NULL

NUMBER

ID of the page's page group.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

FOLDER_ID*

NOT NULL

NUMBER

Page group ID for the page.

Foreign key to:

- WWSBR_ALL_FOLDERS.CAID

- WWSBR_USER_FOLDERS.CAID

PERSPECTIVE_ID*

NOT NULL

NUMBER

ID of the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.ID

PERSPECTIVE_CAID*

NOT NULL

NUMBER

Page group ID for the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.CAID

PERSPECTIVE_NAME

VARCHAR2(60)

Internal name of the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.NAME

F.2.15 WWSBR_FOLDER_TYPE_ATTRIBUTES

Table F-16 lists the columns in the WWSBR_FOLDER_TYPE_ATTRIBUTES view, which describes the attributes that are available within each page type.

Note:

An alternative way of uniquely identifying a row in this view is to use the FOLDER_TYPE_ID, FOLDER_TYPE_CAID, ATTRIBUTE_ID, and ATTRIBUTE_CAID columns.

Table F-16 WWSBR_FOLDER_TYPE_ATTRIBUTES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the page type attribute row.

CAID*

NOT NULL

NUMBER

Page group ID.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

FOLDER_TYPE_ID

NOT NULL

NUMBER

ID of the folder type.

Foreign key to WWSBR_FOLDER_TYPES.ID

FOLDER_TYPE_CAID

NOT NULL

NUMBER

Page group ID for the page type.

Foreign key to WWSBR_FOLDER_TYPES.CAID

ATTRIBUTE_ID

NOT NULL

NUMBER

ID of the attribute.

Foreign key to WWSBR_ATTRIBUTES.ID

ATTRIBUTE_CAID

NOT NULL

NUMBER

Page group ID for the attribute.

Foreign key to WWSBR_ATTRIBUTES.CAID

DEFAULT_VALUE

VARCHAR2(2000)

Default value of the attribute.

The default value is always stored as VARCHAR2, regardless of the attribute's base type.

F.2.16 WWSBR_FOLDER_TYPES

Table F-17 lists the columns in the WWSBR_FOLDER_TYPES view, which describes all page types.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME, CAID, and LANGUAGE columns.

Table F-17 WWSBR_FOLDER_TYPES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the page type.

CAID*

NOT NULL

NUMBER

Page group ID for the page type.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

VARCHAR2(30)

Internal name of the page type.

Functions as alternate key (unique within page group).

DISPLAY_NAME

VARCHAR2(256)

Display name, or title, of the page type.

DESCRIPTION

VARCHAR2(2000)

Description of the page type.

IS_BASE_FOLDER_TYPE

NOT NULL

NUMBER

Indicates that the item is a base page type.

Valid values:

- 0 - not a base page type

- 1 - is a base page type

BASE_FOLDER_TYPE_ID

NUMBER

ID of the base page type on which this page type is based.

F.2.17 WWSBR_ITEM_APPROVAL

Table F-18 lists the columns in the WWSBR_ITEM_APPROVAL view, which describes item approval information for every item that goes through approval. You can use this view to find information like:

- Where is item x in the approval chain?

- Who is currently reviewing item x?

- Which approver rejected item x?

In addition to the information about pending items, you can also use this view to query details on approvals, including approval date, comments, approver, and so on.

Table F-18 WWSBR_ITEM_APPROVAL

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

Internal ID.

APPROVAL_INSTANCE_ID

NOT NULL

NUMBER

Internal ID.

ITEM_ID

NOT NULL

NUMBER

ID of the item pending approval.

CAID

NOT NULL

NUMBER

ID of the page group that contains the item pending approval.

LANGUAGE

NOT NULL

VARCHAR2(30)

Language code.

FOLDER_ID

NUMBER

ID of the page on which the item pending approval appears.

STEP_ID

NUMBER

ID of the step for which the item requires approval.

APPROVAL_ID

NUMBER

ID of the approval process for the item.

Foreign key to WWSBR_CONTENT_AREA_APPROVAL.ID

CURRENT_APPROVER_ID

NOT NULL

NUMBER

ID of the approver of the approval step.

For an ANY approval step this value will be the same for all rows of the approval step. For an ALL approval step this value will be the same as APPROVER_ID.

CURRENT_APPROVER_TYPE

VARCHAR2(10)

The type of the current approver.

Valid values:

- USER - approver is a user

- GROUP - approver is a group

APPROVAL_DATE

DATE

Date when the item was approved.

APPROVER_ID

NUMBER

ID of the approver.

Use wwsec_api.user_name to get the user name of the approver.

APPROVER_COMMENT

VARCHAR2(4000)

Comment specified at the time of approval or rejection.

STATUS

NOT NULL

NUMBER(1)

Status of the item.

Valid values:

- 1 - active

- 2 - pending approval as new and current version

- 3 - pending approval as new but not current version

- 9 - draft

- 0 - pending approval

- -1 - deleted

- -7 - rejected

- -9 - reject deleted

SUBMITTER

VARCHAR2(256)

ID of the user who submitted the item for approval.

VALUE1

VARCHAR2(256)

Not used.

F.2.18 WWSBR_ITEM_ATTRIBUTES

Table F-19 lists the columns in the WWSBR_ITEM_ATTRIBUTES view, which describes the attributes and attribute values associated with items viewable by the current user.

Table F-19 WWSBR_ITEM_ATTRIBUTES

Column

Null?

Data Type

Description

Notes

ITEM_CAID

NOT NULL

NUMBER

Page group ID for the item.

Foreign key to WWSBR_ALL_ITEMS.CAID

ITEM_MASTERID

NOT NULL

NUMBER

Master ID of the item.

Foreign key to WWSBR_ALL_ITEMS.MASTERID

ATTRIBUTE_ID

NUMBER

ID of the attribute.

Foreign key to WWSBR_ATTRIBUTES.ID

ATTRIBUTE_CAID

NUMBER

Page group ID for the attribute.

Foreign key to WWSBR_ATTRIBUTES.CAID

LANGUAGE

NOT NULL

VARCHAR2(30)

Language code.

Foreign key to WWSBR_ALL_ITEMS.LANGUAGE

VALUETYPE

NOT NULL

VARCHAR2(30)

Date type of the attribute.

VALUE

VARCHAR2(4000)

Value of the attribute.

F.2.19 WWSBR_ITEM_PERSPECTIVES

Table F-20 lists the columns in the WWSBR_ITEM_PERSPECTIVES view, which describes the perspectives associated with items viewable by the current user.

Table F-20 WWSBR_ITEM_PERSPECTIVES

Column

Null?

Data Type

Description

Notes

ITEM_CAID*

NOT NULL

NUMBER

Page group ID for the item.

Foreign key to WWSBR_ALL_ITEMS.CAID

ITEM_ID*

NOT NULL

NUMBER

ID of the item.

Foreign key to WWSBR_ALL_ITEMS.ID

ITEM_MASTERID*

NUMBER

Master ID of the item.

Foreign key to WWSBR_ALL_ITEMS.MASTERID

PERSPECTIVE_ID*

NOT NULL

NUMBER

ID of the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.ID

PERSPECTIVE_CAID*

NOT NULL

NUMBER

Page group ID for the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.CAID

PERSPECTIVE_NAME

VARCHAR2(60)

Internal name of the perspective.

Foreign key to WWSBR_ALL_PERSPECTIVES.NAME

F.2.20 WWSBR_ITEM_TYPE_ATTRIBUTES

Table F-21 lists the columns in the WWSBR_ITEM_TYPE_ATTRIBUTES view, which describes the attributes that are available within each item type.

Note:

An alternative way of uniquely identifying a row in this view is to use the ITEM_TYPE_ID, ITEM_TYPE_CAID, ATTRIBUTE_ID, and ATTRIBUTE_CAID columns.

Table F-21 WWSBR_ITEM_TYPE_ATTRIBUTES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the item type attribute row.

CAID*

NOT NULL

NUMBER

Page group ID.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

ITEM_TYPE_ID

NOT NULL

NUMBER

ID of the item type.

Foreign key to WWSBR_ITEM_TYPES.ID

ITEM_TYPE_CAID

NOT NULL

NUMBER

Page group ID for the item type.

Foreign key to WWSBR_ITEM_TYPES.CAID

ATTRIBUTE_ID

NOT NULL

NUMBER

ID of the attribute.

Foreign key to WWSBR_ATTRIBUTES.ID

ATTRIBUTE_CAID

NOT NULL

NUMBER

Page group ID for the attribute.

Foreign key to WWSBR_ATTRIBUTES.CAID

HIDDEN_ATTRIBUTE

NOT NULL

NUMBER(1)

Indicates if the attribute should be hidden.

This column is used for certain built-in item types and is not intended for customer use.

Value values:

- 0 - is hidden

- 1 - not hidden

DEFAULT_VALUE

VARCHAR2(2000)

Default value of the attribute.

The default value is always stored as VARCHAR2, regardless of the attribute's base type.

F.2.21 WWSBR_ITEM_TYPES

Table F-22 lists the columns in the WWSBR_ITEM_TYPES view, which describes all item types.

Note:

An alternative way of uniquely identifying a row in this view is to use the NAME, CAID, and LANGUAGE columns.

Table F-22 WWSBR_ITEM_TYPES

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

ID of the item type.

CAID*

NOT NULL

NUMBER

Page group ID for the item type.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

NAME

VARCHAR2(30)

Internal name of the item type.

Functions as alternate key (unique within page group).

DISPLAY_NAME

VARCHAR2(256)

Display name, or title, of the item type.

DESCRIPTION

VARCHAR2(2000)

Description of the item type.

IS_BASE_ITEM_TYPE

NOT NULL

NUMBER

Indicates that the item is a base item type.

Only non-base item types can be assigned to items.

Valid values:

- 0 - not a base item type

- 1 - is a base item type

BASE_ITEM_TYPE_ID

NUMBER

ID of the base item type on which this item type is based.

F.2.22 WWSBR_SUBSCRIPTION

Table F-23 lists the columns in the WWSBR_SUBSCRIPTION view, which describes user subscription to portal pages and items.

Table F-23 WWSBR_SUBSCRIPTION

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

Internal ID.

OBJECT_CONTEXT_ID

NOT NULL

NUMBER

ID of the page group to which the subscribed object belongs.

FOLDER_ID

NOT NULL

NUMBER

ID of the page to which the subscribed object belongs.

OBJECT_ID

NUMBER

ID of the subscribed item.

In the case of a page subscription, this value is NULL.

GROUP_ID

NUMBER

Not used.

RECIPIENT_ID

NOT NULL

NUMBER

ID of the user or group who has subscribed to the object.

RECIPIENT_TYPE

VARCHAR2(10)

Not used.

F.2.23 WWSBR_USER_FOLDERS

Table F-24 lists the columns in the WWSBR_USER_FOLDERS view, which describes the pages on which the current user has Manage privileges or higher.

Table F-24 WWSBR_USER_FOLDERS

Column

Null?

Data Type

Description

Notes

ID*

NOT NULL

NUMBER

Unique identifier of the page within the page group.

CAID*

NOT NULL

NUMBER

ID of the page group.

Foreign key to WWSBR_ALL_CONTENT_AREAS.ID

LANGUAGE*

NOT NULL

VARCHAR2(30)

Language code.

PARENT_ID

NUMBER

ID of the parent page.

0 (zero) if root page of the page group.

NAME

NOT NULL

VARCHAR2(60)

Internal name of the page.

Must be unique within parent page.

DISPLAY_NAME

NOT NULL

VARCHAR2(256)

Display name, or title, of the page.

CATEGORY_ID

NUMBER

ID of the category assigned to the page.

Foreign key to WWSBR_ALL_CATEGORIES.ID

CATEGORY_CAID

NUMBER

Page group ID for the category assigned to the page.

Foreign key to WWSBR_ALL_CATEGORIES.CAID

DESCRIPTION

VARCHAR2(2000)

Description of the page.

TYPE_ID

NOT NULL

NUMBER

ID of the page type.

Foreign key to WWSBR_FOLDER_TYPES.ID

TYPE_CAID

NOT NULL

NUMBER

Page group ID for the page type.

Foreign key to WWSBR_FOLDER_TYPES.CAID

BASE_TYPE_ID

NOT NULL

NUMBER

The ID of the page base type

Foreign key to WWSBR_FOLDER_TYPES.ID where WWSBR_FOLDER_TYPES.IS_BASE_FOLDER_TYPE=1

IS_PORTLET

NOT NULL

NUMBER(1)

Indicates if the page is published as a portlet.

Valid values:

- 0 - not a portlet

- 1- is a portlet

IS_CACHING_ON

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

CACHE_MODE

NUMBER(1)

The caching mode for the page.

Valid values:

- 2 - no caching

- 1 - cache page definition only

- 0 - cache page definition and content for x minutes

- 4 - cache page definition only at system level

- 3 - cache page definition and content at system level for x minutes

SUB_FOLDER_SEQUENCE

NUMBER

The sequence (order) of the page in its parent page's sub-page region.

DISPLAY_IN_PARENT_FOLDER

NOT NULL

NUMBER(1)

Indicates if the page is displayed in its parent page's sub page region.

ITEMVERSIONING

VARCHAR2(30)

Determines the level of item versioning for the page.

Valid values:

- versionnone - no versioning

- versionsimple - simple versioning

- versionaudit - audit versioning.

STYLE_ID

NOT NULL

NUMBER

ID for the style used by the page.

Foreign key to WWSBR_ALL_STYLES.ID

STYLE_CAID

NOT NULL

NUMBER

Page group ID for the style used by the page.

Foreign key to WWSBR_ALL_STYLES.CAID

URL_VALUE

VARCHAR2(4000)

URL value for a URL type page.

SEARCH_VALUE

VARCHAR2(2000)

DEPRECATED. This column is retained for backward compatibility only.

PLSQL_VALUE

VARCHAR2(2000)

PL/SQL value for a PL/SQL page.

IMAGE

VARCHAR2(350)

Unique name of the image associated with the page.

Matches the NAME column in the document table.

TITLE_IMAGE_NAME

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

ROLLOVER_IMAGE_NAME

VARCHAR2(350)

The unique name of the rollover image associated with the page.

Matches the NAME column in the document table.

BANNER_IMAGE_NAME

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

.

NAVIGATION_BAR_ID

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

NAVIGATION_BAR_CAID

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

IS_PUBLIC

NOT NULL

NUMBER(1)

Indicates that the page is viewable by public users.

Valid values:

- 0 - not public

- 1 - is public

ITEM_LEVEL_SECURITY

NOT NULL

NUMBER(1)

Indicates that item level security is enabled for the page.

Valid values:

- 0 - ILS disabled

- 1 - ILS enabled

DISPLAY_FULL_SCREEN

VARCHAR2

DEPRECATED. This column is retained for backward compatibility only.

PLSQL_FOLDER_EXECUTOR

VARCHAR2(30)

For PL/SQL type pages, the database schema used to execute the PL/SQL code.

CREATEDATE

DATE

Date the page was created.

CREATOR

VARCHAR2(256)

User name of the person who created the page.

UPDATEDATE

DATE

Date the page was last updated.

UPDATOR

VARCHAR2(256)

User name of the person who last updated the page.

F.2.24 WWSBR_USER_PAGES

Table F-25 lists the columns in the WWSBR_USER_PAGES view, which describes the pages on which the current user has Manage privileges or higher. This view is for use with the wwsbr_api.modify folder API and contains more columns that the WWSBR_USER_FOLDERS view.

Table F-25 WWSBR_USER_PAGES

Column

Null?

Data Type

Description

Notes

GUID

NOT NULL

RAW(32)

Globally unique ID of the page.

ID

NOT NULL

NUMBER

ID of the page.

SITEID

NOT NULL

NUMBER

Page group ID of the page.

LANGUAGE

NOT NULL

VARCHAR2(30)

Language code.

PARENTID

NUMBER

ID of the parent page.

NAME

NOT NULL

VARCHAR2(60)

Name of the page.

This name is used in path based URLs.

TITLE

NOT NULL

VARCHAR(256)

Display name, or title, of the page.

SETTINGSSETID

NOT NULL

NUMBER

ID of the style used by the page.

SETTINGSSETSITEID

NOT NULL

NUMBER

Page group ID of the style used by the page.

ISPUBLIC

NOT NULL

NUMBER(1)

Indicates that the page is viewable by public users.

Valid values:

- 0 - not public

- 1 - is public

IMAGE

VARCHAR2(350)

Unique document name of the image associated with the page, for example 6001.JPG.

ROLLOVERIMAGE

VARCHAR2(350)

Unique document name of the rollover image associated with the page, or the inactive tab image for the tab, for example 6001.JPG.

TITLEIMAGE

VARCHAR2(350)

Unique document name of the active tab image for the tab, for example 6001.JPG.

LEADER

VARCHAR2(256)

E-mail address of the page contact.

DESCRIPTION

VARCHAR2(2000)

Description of the page.

PRODUCTION

NUMBER(1)

Not used.

CREATEDATE

DATE

Date the page was created.

CREATOR

VARCHAR2((256)

User name of the person who created the page.

UPDATEDATE

DATE

Date the page was last updated.

UPDATOR

VARCHAR2(256)

User name of the person who last updated the page.

PUBLISHDATE

DATE

Not used.

ICON

VARCHAR2(256)

Not used.

CTXTXT

VARCHAR2(1)

Used internally by search.

HAVEITEMSECURITY

NOT NULL

NUMBER(1)

Indicates that item level security is enabled for the page.

Valid values:

- 0 - ILS disabled

- 1 - ILS enabled

ITEMVERSIONING

VARCHAR2(30)

Indicates the level of item versioning for the page.

Valid values:

- versionnone - no versioning

- versionsimple - simple versioning

- versionaudit - audit versioning

TOPICID

NUMBER

ID of the category assigned to the page.

TOPIC_SITEID

NUMBER

Page group ID of the category assigned to the page.

VALUE

VARCHAR2(2000)

For PL/SQL pages, the PL/SQL code.

For JSP pages, the JSP source document name. Do not change this value for JSP pages.

TYPE

NOT NULL

NUMBER

ID of the page type for the page.

TYPE_SITEID

NOT NULL

NUMBER

Page group ID of the page type for the page.

BASE_TYPE

NOT NULL

NUMBER

ID of the base page type.

IS_PORTLET

NOT NULL

NUMBER(1)

Indicates if the page is published as a portlet.

Valid values:

- 0 - not a portlet

- 1 - is a portlet

QUOTA

VARCHAR2(5)

Not used.

SYSPRIV_NAME

NOT NULL

VARCHAR2(200)

The root page from which the page inherits access settings.

PLSQL_EXECUTOR

VARCHAR2(30)

For PL/SQL type pages, the database schema used to execute the PL/SQL code.

Valid values:

- $PUBLIC$

- $CREATOR$

- <database user name>

KEYWORDS

VARCHAR2(2000)

Keywords for the page.

IS_READY

NUMBER(1)

Indicates that page creation is complete.

Valid values:

- 1 - page creation is complete

INHERIT_PRIV

VARCHAR2(200)

The page from which this page inherits its privileges.

Use the following format:

<page group id>/<page id>

CACHE_MODE

NUMBER(1)

Caching mode for the page.

Valid values:

- 2 - no caching

- 1 - cache page definition only

- 0 - cache page definition and content for x minutes

- 4 - cache page definition only at system level

- 3 - cache page definition and content at system level for x minutes

CACHE_EXPIRES

NUMBER(38)

Cache period in minutes.

TEMPLATE_ID

NUMBER(38)

ID of the template on which the page is based.

TEMPLATE_SITEID

NUMBER(38)

Page group ID of the template on which the page is based.

ALLOW_PAGE_STYLE

NUMBER(1)

For templates, indicates if pages can use a different style.

Valid values

- 1 - allow pages to use different style.

ALLOW_PAGE_ACL

NUMBER(!)

For templates, indicates if pages have different access settings.

Valid values:

- 1 - allow pages to have different access settings

DAV_ID

NOT NULL

VARCHAR2(60)

DAV_LOCK_TOKEN

VARCHAR2(36)

IS_TEMPLATE

NOT NULL

NUMBER(1)

Indicates that the page is a template.

Valid values:

- 1 - is template

INIT_JSPFILE

VARCHAR2(256)

For JSP pages, initial JSP file if the JSP source of the page is a JAR or WAR file.

UI_TEMPLATE_ID

NUMBER(38)

ID of HTML page skin.

TEMPLATE_ISPUBLIC

NOT NULL

NUMBER(1)

Indicates if the template is ready to use.

Valid values:

- 1 - template is ready to use

CONTAINER_ID

NOT NULL

NUMBER

ID of the container page.

DEFAULT_ITEM_REGION_ID

NUMBER

ID of the default item region for the page.

DEFAULT_PORTLET_REGION_ID

NUMBER

ID of the default portlet region for the page.

ITEMTYPE_INHERIT_FLAGS

NUMBER(1)

For WebDAV, indicates if default item types are inherited from parent page.

Valid values:

- 7 - inherit all item types from parent page

- 0 - specify all types on this page

REGFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for regular files.

ZIPFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for zip files.

IMAGEFILE_ITEMTYPE

RAW(32)

For WebDAV, GUID of default item type for image files.

DISPLAYINPARENT

NOT NULL

NUMBER(1)

Indicates if the page is displayed in its parent page's sub page region.

Valid values:

- 1 - display page in parent's sub page region

SEQ

NUMBER

The sequence (order) of the page in its parent page's sub page region.

ALPHABETICAL_SORT

NOT NULL

NUMBER(1)

Indicates that sub pages are displayed in alphabetical order.

Valid values:

- 1 - display sub pages in alphabetical order

IS_ITEM_PAGE

NUMBER(1)

Indicates that the template is for items (with item placeholder item)

Valid values:

- 1 - is item template

ITEM_PAGE_ID

NUMBER(38)

ID of the item template.

ITEM_PAGE_SITE_ID

NUMBER(28)

Page group ID of the item template.

ITEM_PAGE_TABSTRING

VARCHAR2(512)

Tab strings of the item template.

Use the following format:

<tab name>:<sub tab name>:...:<sub tab name>

INHERIT_ITEM_PAGE

NUMBER(1)

For item template only, indicates that items inherit the parent page's item template.

Valid values:

- 1 - inherit parent page's item template

ALLOW_ITEM_PAGE_OVERRIDE

NUMBER(1)

For item template only, indicates that items can have their own item template.

Valid values:

- 1 - allow items on the page to have their own item template

HAS_INPLACE_ITEM

NOT NULL

NUMBER(1)

Indicates if the page or tab has a placeholder item.

Valid values:

- 1 - has a placeholder item

TIMEOUT

NUMBER

Limit time, in seconds, used to fetch portlets.

LAST_ITEM_TEMPLATE_ASSIGNMENT

DATE

Set by trigger.

The script content on this page is for navigation purposes only and does not alter the content in any way.

G Content Management Event Framework Events

This appendix lists and describes the Oracle Portal actions and the CMEF events that they generate. It contains the following sections:

- Section G.1, "Actions and Events for Items"

- Section G.2, "Actions and Events for Pages"

- Section G.3, "Actions and Events for Tabs"

- Section G.4, "Actions and Events for Page Groups"

- Section G.5, "Actions and Events for Attributes"

- Section G.6, "Actions and Events for Item Types"

- Section G.7, "Actions and Events for Page Types"

- Section G.8, "Actions and Events for Categories"

- Section G.9, "Actions and Events for Perspectives"

- Section G.10, "Actions and Events for Templates"

G.1 Actions and Events for Items

Table G-1 lists the actions performed when adding and updating items and the events raised by those actions.

Table G-1 Adding and Editing Items

Description

Action

Event

State

Object Class

An item is added and published immediately

ADD_ITEM

INSERT

PUBLISHED

ITEM

An item is added but set to be published some time in the future

ADD_ITEM

INSERT

NOT_PUBLISHED

ITEM

A portlet instance is added

ADD_ITEM

INSERT

PUBLISHED

ITEM

An item is updated but there is no change to the state of the item (that is, it stays as published or unpublished)

EDIT_ITEM

UPDATE

GENERAL

ITEM

An item that was originally set to be published later is edited, and chosen to be published now

EDIT_ITEM

UPDATE

PUBLISHED

ITEM

A published item is updated and set to be published some time in the future

EDIT_ITEM

UPDATE

UNPUBLISHED

ITEM

An expired item is updated and unexpired

EDIT_ITEM

UPDATE

PUBLISHED

ITEM

An item is hidden

HIDE_ITEM

UPDATE

UNPUBLISHED

ITEM

An item that was hidden is shown

SHOW_ITEM

UPDATE

PUBLISHED

ITEM

An item is expired

EXPIRE_ITEM

UPDATE

UNPUBLISHED

ITEM

An item is unexpired

UNEXPIRE_ITEM

UPDATE

PUBLISHED

ITEM

An item is checked-out

CHECK_OUT_ITEM

UPDATE

CHECKED_OUT

ITEM

An item is checked-in

CHECK_IN_ITEM

UPDATE

CHECKED_IN

ITEM

Table G-2 lists the actions performed when copying and moving items and the events raised by those actions.

Table G-2 Copying and Moving Items

Description

Action

Event

State

Object Class

An item is copied - the copied item is in the published state

COPY_ITEM

INSERT

PUBLISHED

ITEM

An item is copied - the copied item is in the unpublished state

COPY_ITEM

INSERT

NOT_PUBLISHED

ITEM

An item is moved (within a page or to a different page or page group) - the item is in the published state

MOVE_ITEM

DELETE

PURGED

ITEM

--

MOVE_ITEM

INSERT

PUBLISHED

ITEM

An item is moved (within a page or to a different page or page group) - the item is in the unpublished state

MOVE_ITEM

DELETE

PURGED

ITEM

--

MOVE_ITEM

INSERT

NOT_PUBLISHED

ITEM

Table G-3 lists the actions performed when deleting and restoring items and the events raised by those actions.

Table G-3 Deleting and Restoring Items

Description

Action

Event

State

Object Class

An item is deleted in a page group that is set to retain deleted items

DELETE_ITEM

DELETE

MARKED_FOR_DELETE

ITEM

An item is deleted in a page group that is not set to retain deleted items

DELETE_ITEM

DELETE

PURGED

ITEM

An item in the unpublished state is undeleted (item is either hidden or expired or is set to be published in the future)

UNDELETE_ITEM

UPDATE

NOT_PUBLISHED

ITEM

An item in the published state is undeleted

UNDELETE_ITEM

UPDATE

PUBLISHED

ITEM

Table G-4 lists the actions performed when defining privileges for items and the events raised by those actions.

Table G-4 Defining Item Privileges

Description

Action

Event

State

Object Class

Specify item level access privileges

SPECIFY_ITEM_ACL

UPDATE

GENERAL

ITEM

Add user to item ACL

ADD_ITEM_ACL

UPDATE

GENERAL

ITEM

User's privilege is updated on an item

UPDATE_ITEM_ACL

UPDATE

GENERAL

ITEM

Delete user from item ACL

DELETE_ITEM_ACL

UPDATE

GENERAL

ITEM

Choose to inherit security from parent page

INHERIT_ITEM_ACL

UPDATE

GENERAL

ITEM

Table G-5 lists the actions performed when working with item versions and the events raised by those actions.

Table G-5 Item Versioning

Description

Action

Event

State

Object Class

A new version of an item is added and is set to be the current version

ADD_ITEM_VERSION

INSERT

PUBLISHED

ITEM

A new version of an item is added but is not set to be the current version

ADD_ITEM_VERSION

INSERT

NOT_PUBLISHED

ITEM

A version of an item is deleted in a page group that is set to retain deleted items

DELETE_ITEM_VERSION

DELETE

MARKED_FOR_DELETE

ITEM

A version of an item is deleted in a site that is not set to retain deleted items

DELETE_ITEM_VERSION

DELETE

PURGED

ITEM

The current version of an item is changed (the previous current version and the new current version are in the published state)

SWITCH_ITEM_VERSION

UPDATE

UNPUBLISHED

ITEM

--

SWITCH_ITEM_VERSION

UPDATE

PUBLISHED

ITEM

The current version of an item is changed (the previous current version and the new current version are in the unpublished state)

SWITCH_ITEM_VERSION

UPDATE

GENERAL

ITEM

--

SWITCH_ITEM_VERSION

UPDATE

NOT_PUBLISHED

ITEM

The current version of an item is changed (the previous current version was in the published state and the new current version is in the unpublished state)

SWITCH_ITEM_VERSION

UPDATE

UNPUBLISHED

ITEM

--

SWITCH_ITEM_VERSION

UPDATE

NOT_PUBLISHED

ITEM

The current version of an item is changed (the previous current version was in the unpublished state and the new current version is in the published state)

SWITCH_ITEM_VERSION

UPDATE

GENERAL

ITEM

--

SWITCH_ITEM_VERSION

UPDATE

PUBLISHED

ITEM

Table G-6 lists the actions performed when working with item approvals and the events raised by those actions.

Table G-6 Item Approvals

Description

Action

Event

State

Object Class

An item is added in pending mode

SUBMIT_ITEM_FOR_APPROVAL

INSERT

NOT_PUBLISHED

ITEM

An item is added in draft mode

ADD_DRAFT_ITEM

INSERT

NOT_PUBLISHED

ITEM

A pending item is edited by an approver

EDIT_ITEM_BY_APPROVER

UPDATE

GENERAL

ITEM

An item is approved but is pending approval from the next approver

APPROVE_ITEM_STEP

UPDATE

GENERAL

ITEM

An item is approved by all approvers (the approved item overwrites the current, published version)

APPROVE_ITEM

UPDATE

PUBLISHED

ITEM

An item is approved by all approvers (the approved item becomes the new current version)

APPROVE_ITEM

INSERT

PUBLISHED

ITEM

--

APPROVE_ITEM

UPDATE

UNPUBLISHED

ITEM

An item is approved by all approvers (the approved item becomes a new, but not current version)

APPROVE_ITEM

INSERT

NOT_PUBLISHED

ITEM

An item is updated and submitted for approval

SUBMIT_ITEM_FOR_APPROVAL

UPDATE

NOT_PUBLISHED

ITEM

An item is rejected

REJECT_ITEM

UPDATE

GENERAL

ITEM

A rejected item is resubmitted for approval

SUBMIT_ITEM_FOR_APPROVAL

UPDATE

GENERAL

ITEM

A draft item is updated (attributes such as author, description, and so on are updated)

EDIT_DRAFT_ITEM

UPDATE

GENERAL

ITEM

A draft item is updated (the publish date is updated to publish the item some time in the future)

EDIT_DRAFT_ITEM

UPDATE

UNPUBLISHED

ITEM

A draft item is updated (the publish date is updated to publish the item immediately)

EDIT_DRAFT_ITEM

UPDATE

PUBLISHED

ITEM

A draft item is submitted for approval

SUBMIT_ITEM_FOR_APPROVAL

UPDATE

NOT_PUBLISHED

ITEM

An item is copied into a page where draft items are enabled

COPY_DRAFT_ITEM

INSERT

NOT_PUBLISHED

ITEM

An item is copied to a page and is submitted for approval

SUBMIT_ITEM_FOR_APPROVAL

INSERT

NOT_PUBLISHED

ITEM

G.2 Actions and Events for Pages

Table G-7 lists the actions performed when adding and editing pages and the events raised by those actions.

Table G-7 Adding and Editing Pages

Description

Action

Event

State

Object Class

A page is created - there are two messages: one for the page that is added and one for the portlet instance for the default navigation page

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

A page based on a template is created. The template contains one item and one portlet

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

DELETE_PAGEFoot 1

DELETE

PURGED

PAGE

--

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

A page is renamed. If the root page is renamed there are two messages: one for the page and one for the page group.

RENAME_PAGE

UPDATE

GENERAL

PAGE

A page property is updated (for example the description)

EDIT_PAGE

UPDATE

GENERAL

PAGE

A page is copied (the page contains one portlet instance and one item)

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

COPY_ITEM

INSERT

PUBLISHED

ITEM

--

COPY_ITEM

INSERT

PUBLISHED

ITEM

A page is moved under a different parent

MOVE_PAGE

DELETE

PURGED

PAGE

--

MOVE_PAGE

INSERT

PUBLISHED

PAGE

A page is translated

EDIT_PAGE

UPDATE

GENERAL

PAGE

--

EDIT_PAGE

INSERTFoot 2

PUBLISHED

PAGE

--

EDIT_PAGE

UPDATE

GENERAL

PAGE

Versioning is enabled or disabled for a page

EDIT_PAGE

UPDATE

GENERAL

PAGE

Footnote 1 As the page designer steps through the wizard, a page is created that includes the default navigation page. However, as soon as it is determined that the page is based on a template, this page is deleted and a new page (based on the template) is created instead.

Footnote 2 The first update is for the default language, the last is for the current translation. The message of interest is the insert for the current translation.

Table G-8 lists the actions performed when deleting pages and the events raised by those actions.

Table G-8 Deleting Pages

Description

Action

Event

State

Object Class

A page is deleted (if the page has sub-pages, a message is logged for each deleted sub-page, however no messages are logged for deleted items)

DELETE_PAGE

DELETE

PURGED

PAGE

Table G-9 lists the actions performed when defining privileges for pages and the events raised by those actions.

Table G-9 Defining Page Privileges

Description

Action

Event

State

Object Class

ILS is enabled or disabled on a page

UPDATE_PAGE_ACL

UPDATE

GENERAL

PAGE

--

UPDATE_PAGE_ILS

UPDATE

GENERAL

PAGE

A page is displayed to public users

UPDATE_PAGE_ACL

UPDATE

GENERAL

PAGE

--

UPDATE_PAGE_PUBLIC_SETTING

UPDATE

GENERAL

PAGE

A user is added to a page ACL

ADD_PAGE_ACL

UPDATE

GENERAL

PAGE

A user is deleted from a page ACL

DELETE_PAGE_ACL

UPDATE

GENERAL

PAGE

A user's privilege is changed in a page ACL

UPDATE_PAGE_ACL

UPDATE

GENERAL

PAGE

A page is set to inherit its ACL from its parent

INHERIT_PAGE_ACL

UPDATE

GENERAL

PAGE

An ACL is specified at the page level (the page does not inherit its ACL from its parent)

UPDATE_PAGE_ACL

UPDATE

GENERAL

PAGE

--

SPECIFY_PAGE_ACL

UPDATE

GENERAL

PAGE

G.3 Actions and Events for Tabs

Table G-10 lists the actions performed when adding and editing tabs and the events raised by those actions.

Table G-10 Adding and Editing Tabs

Description

Action

Event

State

Object Class

A tab is added

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

A tab is added in a region that contains two items

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

DELETE_ITEMFoot 1

DELETE

PURGED

ITEM

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

DELETE_ITEM

DELETE

PURGED

ITEM

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

A tab is hidden

HIDE_ITEM

UPDATE

UNPUBLISHED

ITEM

A hidden tab is shown

SHOW_ITEM

UPDATE

PUBLISHED

ITEM

A tab is deleted

DELETE_PAGE

DELETE

PURGED

PAGE

--

DELETE_ITEM

DELETE

PURGED

ITEM

A tab is renamed

RENAME_PAGE

UPDATE

GENERAL

PAGE

A tab property is updated (for example, the display name)

EDIT_PAGE

UPDATE

GENERAL

PAGE

Footnote 1 Items on the original page are moved to the tab. So the item is first deleted from the original page and then added to the new tab.

G.4 Actions and Events for Page Groups

Table G-11 lists the actions performed when adding and editing page groups and the events raised by those actions.

Table G-11 Adding and Editing Page Groups

Description

Action

Event

State

Object Class

A page group is added

ADD_PAGE_GROUP

INSERT

GENERAL

PAGE_GROUP

A page group is renamed

RENAME_PAGE_GROUP

UPDATE

GENERAL

PAGE_GROUP

Table G-12 lists the actions performed when deleting and purging page groups and the events raised by those actions.

Table G-12 Deleting and Purging Page Groups

Description

Action

Event

State

Object Class

A page group is deleted. Messages are not logged for any items or sub-pages.

DELETE_PAGE_GROUP

DELETE

PURGED

PAGE_GROUP

Deleted items are purged from a page group (one message for each item and one message for the actual purge operation)

DELETE_ITEM

DELETE

PURGED

ITEM

--

PURGE_DELETED_ITEM

DELETE

PURGED

PAGE_GROUP

Expired items are purged from a page group (one message for each item and one message for the actual purge operation)

DELETE_ITEM

DELETE

PURGED

ITEM

--

DELETE_ITEM

DELETE

PURGED

ITEM

--

PURGE_EXPIRED_ITEM

DELETE

PURGED

PAGE_GROUP

Choose to not retain deleted items at the page group level, thus purging all existing retained deleted items (one message for each item and one message for the actual purge operation)

DELETE_ITEM

DELETE

PURGED

ITEM

--

PURGE_DELETED_ITEM

DELETE

PURGED

PAGE_GROUP

Table G-13 lists the actions performed when defining privileges for page groups and the events raised by those actions.

Table G-13 Defining Page Group Privileges

Description

Action

Event

State

Object Class

A user is added to a page group ACL

ADD_PAGE_GROUP_ACL

UPDATE

GENERAL

PAGE_GROUP

An user's privilege is changed in a page group ACL

UPDATE_PAGE_GROUP_ACL

UPDATE

GENERAL

PAGE_GROUP

A user is deleted from a page group ACL

DELETE_PAGE_GROUP_ACL

UPDATE

GENERAL

PAGE_GROUP

Table G-14 lists the actions performed when installing translations for page groups and the events raised by those actions.

Table G-14 Page Group Translations

Description

Action

Event

State

Object Class

A translation is installed

TRANSLATE_PAGE

INSERT

PUBLISHED

PAGE

G.5 Actions and Events for Attributes

Table G-15 lists the actions performed when working with attributes and the events raised by those actions.

Table G-15 Attributes

Description

Action

Event

State

Object Class

An attribute is added. The data type of the attribute is stored in the STATE field, for example, DATA_TYPE_TEXT.

ADD_ATTRIBUTE

INSERT

DATA_TYPE_TEXT

ATTRIBUTE

An attribute is updated

EDIT_ATTRIBUTE

UPDATE

DATA_TYPE_TEXT

ATTRIBUTE

An attribute is promoted (the message is the same regardless of how many items use the attribute)

MOVE_ATTRIBUTE

UPDATE

GENERAL

ATTRIBUTE

An attribute is deleted (the message is the same even if there are items using the attribute)

DELETE_ATTRIBUTE

DELETE

DATA_TYPE_TEXT

ATTRIBUTE

G.6 Actions and Events for Item Types

Table G-16 lists the actions performed when working with item types and the events raised by those actions.

Table G-16 Item Types

Description

Action

Event

State

Object Class

A custom item type is created

ADD_ITEM_TYPE

INSERT

GENERAL

ITEM_TYPE

An item type is edited and changes are made in the Main tab (if you edit the name, a different message is generated, see following description)

EDIT_ITEM_TYPE

UPDATE

MAIN_TAB

ITEM_TYPE

An item type is renamed

RENAME_ITEM_TYPE

UPDATE

MAIN_TAB

ITEM_TYPE

An attribute is attached to an item type

EDIT_ITEM_TYPE

UPDATE

ATTRIBUTES_TAB

ITEM_TYPE

An attribute is detached from an item type

DETACH_ATTRIBUTE

UPDATE

ATTRIBUTES_TAB

ITEM_TYPE

Attribute default values are updated

EDIT_ITEM_TYPE

UPDATE

ATTRIBUTES_TAB

ITEM_TYPE

A procedure is attached to an item type

EDIT_ITEM_TYPE

UPDATE

PROCEDURES_TAB

ITEM_TYPE

A procedure attached to an item type is edited and new parameters are added

EDIT_ITEM_TYPE

UPDATE

PROCEDURES_TAB

ITEM_TYPE

An item type is promoted

MOVE_ITEM_TYPE

UPDATE

GENERAL

ITEM_TYPE

An item type is deleted (the message is the same even if there are items based on the item type)

DELETE_ITEM_TYPE

DELETE

PURGED

ITEM_TYPE

G.7 Actions and Events for Page Types

Table G-17 lists the actions performed when working with page types and the events raised by those actions.

Table G-17 Page Types

Description

Action

Event

State

Object Class

A custom page type is created

ADD_PAGE_TYPE

INSERT

GENERAL

PAGE_TYPE

A page type is edited and changes are made in the Main tab (if you edit the name, a different message is generated, see following description)

EDIT_PAGE_TYPE

UPDATE

MAIN_TAB

PAGE_TYPE

A page type is renamed

RENAME_PAGE_TYPE

UPDATE

MAIN_TAB

PAGE_TYPE

An attribute is attached to a page type

EDIT_PAGE_TYPE

UPDATE

ATTRIBUTES_TAB

PAGE_TYPE

Attribute default values are added

EDIT_PAGE_TYPE

UPDATE

ATTRIBUTES_TAB

PAGE_TYPE

An attribute is detached from a page type

DETACH_ATTRIBUTE

UPDATE

ATTRIBUTES_TAB

PAGE_TYPE

A procedure is attached to a page type

EDIT_PAGE_TYPE

UPDATE

PROCEDURES_TAB

PAGE_TYPE

A procedure attached to a page type is edited and new parameters are added

EDIT_PAGE_TYPE

UPDATE

PROCEDURES_TAB

PAGE_TYPE

A page type is promoted

MOVE_PAGE_TYPE

UPDATE

GENERAL

PAGE_TYPE

A page type is deleted

DELETE_PAGE_TYPE

DELETE

PURGED

PAGE_TYPE

G.8 Actions and Events for Categories

Table G-18 lists the actions performed when working with categories and the events raised by those actions.

Table G-18 Categories

Description

Action

Event

State

Object Class

A category is added

ADD_CATEGORY

INSERT

GENERAL

CATEGORY

A category is renamed

RENAME_CATEGORY

UPDATE

GENERAL

CATEGORY

--

RENAME_PAGE

UPDATE

GENERAL

PAGE

A category is edited and changes are made in the Main tab

EDIT_CATEGORY

UPDATE

GENERAL

CATEGORY

An image is attached to a category

EDIT_CATEGORY_IMAGE

UPDATE

GENERAL

CATEGORY

An image is detached from a category

DELETE_CATEGORY_IMAGE

UPDATE

GENERAL

CATEGORY

A category is promoted

MOVE_CATEGORY

UPDATE

GENERAL

CATEGORY

A category is deleted

DELETE_CATEGORY

DELETE

GENERAL

CATEGORY

G.9 Actions and Events for Perspectives

Table G-19 lists the actions performed when working with perspectives and the events raised by those actions.

Table G-19 Perspectives

Description

Action

Event

State

Object Class

A perspective is added

ADD_PERSPECTIVE

INSERT

GENERAL

PERSPECTIVE

A perspective is renamed

RENAME_PERSPECTIVE

UPDATE

GENERAL

PERSPECTIVE

--

RENAME_PAGE

UPDATE

GENERAL

PAGE

A perspective is edited and changes are made in the Main tab

EDIT_PERSPECTIVE

UPDATE

GENERAL

PERSPECTIVE

An image is attached to a perspective

EDIT_PERSPECTIVE_IMAGE

UPDATE

GENERAL

PERSPECTIVE

An image is detached from a perspective

DELETE_PERSPECTIVE_IMAGE

UPDATE

GENERAL

PERSPECTIVE

A perspective is promoted

MOVE_PERSPECTIVE

UPDATE

GENERAL

PERSPECTIVE

A perspective is deleted

DELETE_PERSPECTIVE

DELETE

GENERAL

PERSPECTIVE

G.10 Actions and Events for Templates

Table G-20 lists the actions performed when working with templates and the events raised by those actions.

Table G-20 Templates

Description

Action

Event

State

Object Class

A page based on a template is createdFoot 1

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

DELETE_PAGE

DELETE

PURGED

PAGE

--

ADD_PAGE

INSERT

PUBLISHED

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

ADD_ITEM

INSERT'

PUBLISHED

ITEM

A page is edited to be based on a template, resulting in content from one region being deleted

DELETE_ITEM

DELETE

PURGED

ITEM

--

EDIT_PAGE

UPDATE

GENERAL

PAGE

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

--

ADD_ITEM

INSERT

PUBLISHED

ITEM

An item is added to a template. There is a message for the item on the template itself and then additional messages for each time the item is replicated on pages based on the template

ADD_ITEM

INSERT

PUBLISHED

ITEM

An item is deleted from a template. There is a message for the item on the template itself and then additional messages (with different page IDs and page group IDs) for each time the item is deleted from pages based on the template.

DELETE_ITEM

DELETE

PURGED

ITEM

A page is detached from a template. One or more messages, as shown, is produced for each item and portlet that was on the template

COPY_ITEM

INSERT

PUBLISHED

ITEM

A template, on which one or more pages are based, is deleted.Foot 2

DELETE_PAGE

DELETE

PURGED

PAGE

--

COPY_ITEM

INSERT

PUBLISHED

ITEM

--

COPY_ITEM

INSERT

PUBLISHED

ITEM

--

DELETE_ITEM

DELETE

PURGED

ITEM

--

COPY_ITEM

INSERT

PUBLISHED

ITEM

Footnote 1 The first two inserts are for the page creation. The next delete is because that page gets deleted when you attach the template. The next insert is for the new page based on the template. The following two item inserts are for item replication from the template. There will be an insert event for every item and portlet on the template.

Footnote 2 The delete event is for the deletion of the actual template. The first two inserts are when the replicated items on a page based on the template are copied over. There will be an insert message for each item on the template. The following delete and insert events are for a non-replicated item on the page based on the template. There will be a delete and corresponding insert event for every non-replicated item on the page.

Glossary

About mode

An optional portlet Show mode that displays information about the portlet's copyright, version, and author.

access control list

See ACL.

ACL

Access Control List. A list of groups and users authorized for specific access to an object.

action

In the context of CMEF, an action occurs when something happens in a portal (either through the Oracle Portal user interface, WebDAV, or PL/SQL APIs). Actions within a portal trigger CMEF events, which cause Oracle Portal to write messages to the WWSBR_EVENT_Q queue. A subscriber can consume these messages and perform its own actions depending on what those messages are.

add-in

See extension.

advanced search

A search engine that enables users to:

- Find content that contains any or all terms in the search string.

- Search selected page groups, or search across all page groups.

- Restrict a search to a particular page, category, perspective, item type, or attribute.

If Oracle Text is installed and enabled, all text attributes and the actual content of documents and URLs are searched. If Oracle Text is not installed, or is disabled, the following metadata is searched: item attributes (Display Name, Description, Keywords, and Author), page attributes (Display Name, Description, and Keywords) and category/perspective attributes (Display Name and Description).

If Oracle Text is installed and enabled, you can also use advanced search to perform near, soundex, and fuzzy searches.

See also search portlet. Contrast with basic search and custom search.

API

Application Programming Interface. A set of exposed data structures and functions that an application can use to invoke services on a portal object, such as a portlet, page, or page group. Note that Oracle Portal APIs are exposed through the PDK available from the Oracle Portal Developer Kit (PDK) page on OTN:

http://www.oracle.com/technology/products/ias/portal/pdk.html

application

INTERNAL: Obsolete terminology. DO NOT USE to refer to a provider of portlets built using the Portlet Builder (for example, forms, reports, charts). Use database provider instead.

Application Programming Interface

See API.

Application Service Provider

See ASP.

approval notification

A message in the Notification portlet indicating that a user whose content requires approval has created or updated an item. The intended recipients of approval notifications (approvers) relating to a particular page group or page are identified in an approval process. An approver may respond to the notification by approving or rejecting the item in question.

approval process

A series of one or more steps that determines which users (or groups) need to review content that requires approval before it can be published. Each step in an approval process must have one or more approvers. Routing to the approvers can be in serial (one at a time) or in parallel (all at once), and each step can be defined to require a response (either an approval or a rejection) by any one member or by all members. Once the required number of responses is received during a step, the process continues to the next step. The process ends when the item is rejected, or the final step is reached and the document is approved.

approver

A user identified in a page group or page approval process, either explicitly or implicitly through group membership, as someone who needs to review content that requires approval before it can be published. An approver may choose to approve or reject such content.

ASP

Application Service Provider. A service that provides remote hosting of applications, maintaining and operating the hardware, software, and other resources required to run the applications.

attribute

A portal object that stores information (or metadata) about an item or page: for example, Create Date, Expire Date, or Author. A page group administrator can create custom attributes to extend the functionality of item types and page types. For example, a base attribute on a file is Display Name; a custom attribute might be a check box to indicate whether the file is confidential. Custom attributes are useful for assigning unique, searchable identifiers to items.

authenticated user

A user who is logged on to a portal. By default, authenticated users can access and, based on privileges granted to the user, act on certain portal objects, such as pages.

Contrast with public users, who can access public content only.

authorization

The evaluation of security constraints to send a message or make a request. Authorization uses specific criteria—authentication and restriction—to determine whether the request should be permitted.

authorized user

See authenticated user.

banner

See region banner. See also navigation page.

base attribute

See attribute.

base item type

See item type.

base page type

See page type.

basic search

A search engine that enables users to find content that contains a specific search string.

If Oracle Text is installed and enabled, all text attributes and the actual content of documents and URLs are searched. If Oracle Text is not installed, or is disabled, the following metadata is searched: item attributes (Display Name, Description, Keywords, and Author), page attributes (Display Name, Description, and Keywords) and category/perspective attributes (Display Name and Description).

See also search portlet. Contrast with advanced search and custom search.

basic search box item

A navigation item that users can add to a page to enable other users to perform basic searches. The search box can initiate a search of all page groups or a specified subset of page groups.

batch job

The process of running a Portlet Builder portlet in the background using the Oracle Portal batch job facility. An end user can run a portlet in batch mode by selecting options on the portlet's personalization form. Batch processing is useful if the portlet is based on a large amount of data, if the portlet displays many rows of data, or if the job may take a long time to run.

bind variable

A variable in a SQL statement that must be replaced with a valid value or address of a value in order for the statement to execute successfully. Portlet developers typically use bind variables (for example, dept) to display a parameter entry field in a portlet's personalization form. The entry field enables end users to choose the data that the portlet will display.

bookmark

See favorite.

breadcrumbs

See page path item.

Builder page

See Portal Builder page.

bulk load

See zip file item.

caching

The act of storing frequently accessed information, typically Web pages or portlets in Oracle Portal, in a location where it can be accessed quickly to avoid frequent content generation. For example, Oracle Web Cache stores dynamically-generated portlets in its memory, then serves them to the PPE when there is a request for the specified portlet. This storage reduces the total time spent handling the request by avoiding connections to the back-end database and other Web sites.

See also expiry-based caching, invalidation-based caching, system level caching, user level caching, and validation-based caching.

calendar

A portlet created with the Portlet Builder that displays the results of a SQL query in calendar format.

call interface

The call interface displays the arguments that were selected when a Portlet Builder portlet was originally created or last edited.

category

A predefined attribute used to group or classify pages, items, and portlets in a page group. A category helps users answer the question: What is this item or page? For example, in a travel page group, you might have categories for maps, snapshots, and hotel reviews. Users can assign only one category to a particular item or page.

See also perspective.

chart

A portlet created with the Portlet Builder that displays the results of a SQL query as a chart, such as a bar chart, pie chart, or line chart. Bar charts are based on at least two table or view columns: one that identifies the bars on the chart and another that calculates the size of the bars on the chart.

check out/check in

A mechanism that allows a user to lock an item, by checking it out, so that other users cannot edit that same item. This prevents users from overwriting each others changes. After editing the item, the user releases it by checking it back in, making it available again for other users to edit.

child object

An object that is part of a hierarchy. For example, sub-pages, sub-categories, and sub-perspectives are child objects of a page, category, and perspective respectively.

See also manifest.

child page

In Oracle Instant Portal, a page created beneath a top-level page. Child pages are listed along the left side of the top-level page to which they belong, in the navigation area, and usually support the top-level page's main theme. You can add, delete, re-position, or edit child pages right in the navigation area, assuming you have the appropriate privileges.

CHTML

Compact HTML. A subset of HTML recommendations, designed for small devices.

classification

Categories and perspectives are used to classify the content of a page or item so that it is easy for users to locate that content during a search.

See also category and perspective.

CLOB

Character Large Object. A Large Object (LOB) datatype whose value is composed of character data corresponding to the database character set. A CLOB can be indexed and searched by the Oracle Text search engine.

cluster

A database object used to store tables that are related to one another and that are often joined together in the same area on a disk.

CMEF

Content Management Event Framework. A feature that enables you to extend Oracle Portal's content management event functionality by adding programmatic hooks to certain pre-defined portal events. The framework publishes these events to an Oracle Streams Advanced Queuing (AQ) queue. This allows third party programs to subscribe to these events and to use the APIs to extend the functionality of the portal. CMEF should not be confused with the portlet events feature.

CMEF event

An action within a portal triggers a corresponding CMEF event. A developer can write code that responds to CMEF events.

community

See Portal Community.

compact HTML

See CHTML.

content area

In Oracle Instant Portal, refers to the area in which a page's items (or content) appear, on the right side of the screen.

content contributor

A user who has the appropriate privileges to add items to a page. Appropriate page privileges include Manage Content and Manage Items With Approval. Appropriate item privileges include Manage, Edit, and View.

content item type

A means of classifying the actual content of an item that is being uploaded to a page, such as a document, text, or an image.

Built-in content item types are:

- file item and simple file item

- text item and simple text item

- URL item and simple URL item

- image item and simple image item

- image map item

- PL/SQL item and simple PL/SQL item

- page link item and simple page link item

- zip file item

See also item type. Contrast with navigation item type.

Content Management Event Framework

See CMEF.

content repository

The Oracle Portal schema within the Oracle Metadata Repository that contains the content and metadata associated with a particular portal instance.

Contribute privileges

A privilege level on an Oracle Instant Portal page that allows the user to add, edit, move, or delete items on the page. A user with Contribute privileges also has all View privileges.

CSS

Cascading Style Sheet. A simple mechanism for adding style, such as fonts, colors, and spacing, to Web documents.

current version

The version of an item that is displayed on the page. The current version is not necessarily the most recent version of the item.

See also versioning.

custom attribute

See attribute.

custom item type

See item type.

custom page type

See page type.

custom provider

A type of provider that enables you to create and maintain portlets that access customer-specific content or applications. You can build custom portlets in Oracle Portal either declaratively or programmatically.

custom search

A search engine that enables users to define a variety of searches against information stored in the Oracle Portal schema of the Oracle Metadata Repository. By editing the defaults of the Custom Search portlet, you can define unique search forms and search results pages that meet the specific search requirements, or configure portlets that execute and return results based on predefined search criteria.

If Oracle Text is installed and enabled, all text attributes and the actual content of documents and URLs are searched. If Oracle Text is not installed, or is disabled, the following metadata is searched: item attributes (Display Name, Description, Keywords, and Author), page attributes (Display Name, Description, and Keywords) and category/perspective attributes (Display Name and Description).

See also search portlet. Contrast with advanced search and basic search.

DAD

Database Access Descriptor. A set of values that specify how an application connects to an Oracle database to fulfill an HTTP request. The information in the DAD includes the user name (which also specifies the schema and the privileges), password, connect-string, error log file, standard error message, and Globalization Support parameters such as language, date format, date language, and currency.

Database Access Descriptor

See DAD.

database administrator

See DBA.

database object

See object.

database provider

A type of provider that is written as a PL/SQL stored procedure and is used to create portlets that reside in the database. One example of a database provider is a provider built using the Portlet Builder to provide form, report, and chart portlets.

Contrast with Web provider.

data portlet

A portlet built using the Portlet Builder that displays data in a spreadsheet format.

DAV

See WebDAV.

DBA

Database Administrator. A user belonging to the DBA group. By default, members in the DBA group have access to all Oracle Portal product pages, and have the Manage privilege for all pages, page groups, database providers, and administration.

default language

The language in which a page group is originally created. After creating the page group, you can add translations to it to enable users to add content in different languages.

default subscriber

The base subscriber that is installed along with the install of Oracle Portal.

de-militarized zone

See DMZ.

dequeue

The operation of retrieving a CMEF message from an Oracle Streams AQ queue.

Contrast with enqueue.

developer

A user who builds portlets for others to include on their pages. Relies heavily on the APIs to extend the capabilities of Oracle Portal; may frequently consult the Portal Knowledge Exchange or the forums for advice or inspiration.

Developer Services

See Portal Developer Services.

DIP

Directory Integration Platform. The provisioning platform provided by Oracle Internet Directory to synchronize different directories and directory enabled applications.

direct access URL

Obsolete terminology. See path-based URL.

Directory Information Tree

See DIT.

Directory Integration Platform

See DIP.

display name

An object's external name used throughout Oracle Portal, for example, in the Navigator, on pages, and in the page editor. When the object is published as a portlet, the display name is used as the title of the portlet in the Portlet Repository.

Distinguished Name

See DN.

DIT

Directory Information Tree. A hierarchical tree-like structure in Oracle Internet Directory consisting of the DNs of the entries.

DN

Distinguished Name. The unique name of a directory entry in Oracle Internet Directory. It includes all the individual names of the parent entries back to the root. The DN tells you exactly where the entry resides in the directory's hierarchy. This hierarchy is represented by a directory information tree (DIT).

DMZ

De-militarized Zone. A computer host or small network inserted as a "neutral zone" between a company's private network and the outside public network. It prevents outside users from getting direct access to a server that has company data. A DMZ is an optional and more secure approach to a firewall and effectively acts as a proxy server as well. (The term comes from the geographic buffer zone that was set up between North Korea and South Korea following the UN police action in the early 1950s.)

document control

See check out/check in.

draft item

An item that has been added to a page but has not yet been submitted for approval. In View mode, a draft item is visible only to its author. When a draft item is ready for approval, the author can submit it, at which point the approval process is triggered. Draft items can be added to a page only if approvals are enabled for the page group.

durable URL

A URL that uses the item's GUID (globally unique ID) to uniquely identify it. An item's GUID does not change so its durable URL will not break when the item is edited, renamed, moved, or imported to a different portal instance.

Contrast with path-based URL.

dynamic page

A portlet created with the Portlet Builder that displays dynamic content on a page. The dynamic page wizard enables you to specify one or many PL/SQL blocks within HTML code to create a page. This code executes every time an end user requests the page.

dynamic URL

A URL that contains a query string (one or more parameters and the characters ? and &).

Contrast with path-based URL

edge side includes

See ESI.

Edit Defaults mode

An optional portlet Show mode that enables administrators to set the defaults of a portlet for all users.

Contrast with Edit mode.

Edit mode

1. Page editing: Edit mode enables an authenticated user with appropriate privileges to set page properties and to add, modify, or delete portlets and items on the page. To switch to Edit mode, the user clicks an Edit link on the page. There are three Edit mode views: Graphical view, Layout view, and List view.
See also Mobile Preview mode and Pending Items Preview mode.

2. Portlets: An optional portlet Show mode that enables personalization of the portlet for each user, for each instance.
Contrast with Edit Defaults mode.

3. Oracle Instant Portal: Opposite of View mode. When the Edit mode handle bar is clicked, thus displaying the edit toolbar and the Add Item and Add Page buttons, the page is said to be in Edit mode. This is the only state in which action may be taken upon the page.

Edit mode handle bar

In Oracle Instant Portal, the gray icon that one clicks to display the edit toolbar. When the edit toolbar is displayed, the page is in Edit mode. Users with View privileges on the page do not see the Edit mode handle bar.

email item

In Oracle Instant Portal, an item represented by a yellow envelope and, optionally, a title on the page. When the user clicks the envelope, an e-mail editor is opened displaying a blank e-mail. The e-mail is pre-populated with the address specified by the item's creator.

enqueue

The operation of publishing messages to an Oracle Streams AQ queue.

Contrast with dequeue.

Oracle Enterprise Manager

Oracle Enterprise Manager is a component of the Oracle Fusion Middleware that enables administrators to manage Oracle Fusion Middleware services through a single environment. For example, an administrator can use Oracle Enterprise Manager to monitor the services that make up an Oracle Portal instance, including HTTP services, the PPE, the Oracle database, providers, and Oracle Ultra Search.

enterprise portal

A common, integrated starting point that provides personalized access to relevant enterprise information sources. Enterprise portals enable site visitors to personalize their view of the resources available on the public Internet.

ESI

Edge Side Includes. A markup language to enable partial page caching (PPC) of HTML fragments.

event

An action within a portal triggers a corresponding event. Page designers can specify what should happen when these events occur, for example, by specifying that a particular event forces the reloading of the current page, and passes parameters to the newly loaded page.

Event servlet

The Event servlet implements the functionality of Oracle Portal to allow for dynamic page navigation when accessing an event enabled portlet. The Event servlet runs in the same container as the PPE.

expandable rich text item

In Oracle Instant Portal, a type of text item designed to conserve space on the page. When in View mode, an expandable rich text item is represented by a white envelope, a title, and a summary. When the user clicks the envelope, the item expands to reveal the text associated with the item. Compare to a rich text item, in which the full text of the item is never hidden. Both expandable rich text and rich text items may contain images, hyperlinks, and tables, as well as any valid HTML code.

expiration period

The number of days after which, or an exact date on which, an item expires. After an item expires, it is viewable only by the item's or page's owner and the page group administrator in Edit mode. Expired items are removed from the database during a system purge of all expired items.

expiry-based caching

A caching method that uses a retention period to specify how long the item is valid in the cache before a refresh is required. When there is a request for the item beyond the retention period, it is refreshed in the cache.

Oracle Web Cache uses both expiry-based caching and invalidation-based caching. Any data saved in Oracle Web Cache is considered valid until it is invalidated or it expires. For example, if expiry-based caching is specified for a fully assembled page, the page content remains valid in the cache for the specified retention period before it needs to be regenerated.

See also invalidation-based caching and validation-based caching.

expiry notification

A message automatically sent to a user or group indicating that an item on the page is about to expire. The notification is set up by the page group administrator.

explicit object

An object which is explicitly selected, from the Navigator or Bulk Actions, for export.

See also manifest and referenced object.

export

A method of creating a set of files (transport set) that contains page groups, pages, portlets, and other content from a single Oracle Portal instance. You can then import this set of files into another Oracle Fusion Middleware instance.

eXtensible Markup Language

See XML.

extension

A Java class that extends the functionality of Oracle JDeveloper. For example the PDK includes an extension to aid with the development of portlets with Oracle JDeveloper.

external application

An application external to Oracle Portal that is typically launched from the External Applications portlet. As each external application is configured by a portal administrator, users simply supply their user name and password information. The Oracle Application Server Single Sign-On will present these credentials for future authentication challenges.

external object

An object which is an external dependency of an explicit object. External objects ensure that the explicit objects perform on the target portal.

See also manifest.

favorite

A hyperlink in the Favorites portlet that provides quick access to a frequently visited URL, either inside or outside your company firewall. An authenticated user can personalize the Favorites portlet with his or her own preferred set of frequently accessed URLs.

Favorite Content area

An area on the Oracle Instant Portal home page in which a user's favorite content appears. Users select items for this area by clicking an icon that looks like a house beside the item. The Favorite Content area is different for each user.

favorite group

A collection of favorites (and favorite groups) that are usually logically related.

Federated Portal Adapter

See FPA.

file item

A type of item that a user can add to a page. When a user adds a file item to a page, the file is uploaded into the Oracle Portal schema of the Oracle Metadata Repository and is displayed as a hyperlink on the page. When a user clicks the display name link, the file may be downloaded to the user's computer or displayed in the user's Web browser, depending on the file type and the configuration of the browser.

In Oracle Instant Portal file items are represented by a rectangle with a red asterisk at the top and, optionally, a title and summary. When the user clicks the icon, the file associated with the item opens in a second browser window.

firewall

A system (either hardware or software) that acts as an intermediary to protect a set of computers or networks from outside attack. It regulates access to computers on a local area network from outside, and regulates access to outside computers from within the local area network. A firewall can work either by acting as a proxy server that forwards requests so that the requests behave as though they were issued by the firewall machine, or by examining requests and attempting to eliminate suspect calls.

form

A portlet created with the Portlet Builder that provides a transactional interface to one or more database tables, views, or procedures. For example, you can the Portlet Builder to build a form for entering new employee information into your Human Resources database.

See also master-detail form.

FPA

Federated Portal Adapter. The Federated Portal Adapter is a module in the portal instance (written in both Java and PL/SQL) that receives SOAP messages for a Web provider, parses the SOAP, and then dispatches the messages to a database provider as PL/SQL procedure calls. In effect, the Federated Portal Adapter makes a database provider behave exactly the same way as a Web provider, allowing users to distribute their database providers across database servers. All remote providers can be treated as Web providers, hiding their implementation (database or Web) from the user. The most common use is to share database providers (including page groups) owned by one portal instance among other portal instances.

frame driver

A portlet created with the Portlet Builder consisting of a Web page divided into two frames. A driving frame contains a SQL query that drives the contents of the second (target) frame.

Full Screen mode

An optional portlet Show mode that provides more content than can be shown in the portlet when it is sharing a page with other portlets.

function

A PL/SQL subprogram that performs a specified sequence of actions and then returns a value. Functions are usually small blocks of code written to perform a specific task within the scope of a larger application.

In a page, end users execute functions by clicking the title of a PL/SQL or custom item.

gist

An Oracle Text summary consisting of the document paragraphs that best represent the overall subject matter. You can use such summaries to skim the main content of the text or assess your interest in the text's subject matter.

global privilege

A privilege that grants a certain level of access to a user or group on all objects of a particular type. For example, you could grant a Web Designer group Manage privileges on all styles.

grantee

A user who is given privileges on an object by another user.

Graphical view

A page editing view that renders page content in-place on the page. Graphical view enables you to view pages and items as they appear on the finished page as you edit.

Contrast with Layout view and List view.

group

A collection of Oracle Portal users who typically share a common need or interest; for example, Human Resources, Accounting, and so on. Groups make it easy to grant access to an object (such as a page or portlet) to several users at once. You can also use groups to implement user roles by assigning role-related privileges to a group, then adding users in that role. Oracle Internet Directory tracks the membership of Oracle Portal groups.

group owner

A user who has the privilege to add or delete members from a group, or to delete the group itself. Groups can have more than one owner.

HA

High Availability. A collection of solutions to ensure that your applications meet the required availability to achieve your business goals, eliminating single points of failure with no or minimal outage in service.

Handheld Device Markup Language

See HDML.

HDML

Handheld Device Markup Language. A simple language to define hypertext-like markup content and applications for handheld devices with small display.

Help mode

An optional portlet Show mode that displays usage information about the functionality of the portlet.

hierarchy

A portlet created with the Portlet Builder that displays data from a self-referencing table or view. At least two columns in the table must share a recursive relationship. A hierarchy can contain up to three levels and display data such as employees in an organization chart or the hierarchical relationship between menus in a Web site.

home page

The page, defined within Oracle Portal, that typically displays when logging on or when a user clicks a Home smart link item. The portal administrator chooses this page for public users; authenticated users may choose their own. If the portal administrator enables mobile page design, he or she can specify a separate mobile home page to display when the portal is accessed from a mobile device.

hosted site

See stripe.

HTML

Hyper Text Markup Language. A format for encoding hypertext documents that may contain text, graphics, and references to programs and other hypertext documents.

HTML content layout

A type of HTML Template that uses item-level substitution tags to define a formatting scheme for individual regions. The HTML content layout repeats itself for each item or portlet in the region.

Contrast with HTML page skin.

HTML page skin

A type of HTML Template that uses page-level substitution tags to control the appearance of the area surrounding page content. You can apply HTML page skins to pages or Portal Templates.

Contrast with HTML content layout.

HTML Template

A portal object built using your own HTML code that wraps around your page or region content. You can use an Oracle Portal wizard or any third party HTML editor to build HTML Templates.

See also HTML content layout and HTML page skin. Contrast with Portal Template.

HTTP

Hyper Text Transfer Protocol. The underlying format, or protocol, used across the Web to format and transmit messages and determine what actions Web servers and browsers should take in response to various commands. HTTP is the protocol typically used between Oracle WebLogic Server and its clients.

Hyper Text Markup Language

See HTML.

Hyper Text Transfer Protocol

See HTTP.

IDE

Integrated Development Environment. A visual tool containing editors, debuggers, screen painters, object browsers, and the like.

ILS

Item Level Security. A mechanism that controls granular access to items on a given page. ILS authorizes item managers to grant explicit item access to users and groups that take precedence over page-level privileges.

image item

A type of item that a user can add to a page. You can add images in JPEG, GIF, or PNG formats.

In Oracle Instant Portal, as opposed to the images that are added as part of a rich text item or expandable rich text item, image items are designed to standalone on the page. An image item is added through the Add Item icon; an image that is part of a text item is added through the Insert Image window.

image map item

A type of item that a user can add to a page. An image map is a single image with hotspots that, when clicked, link to other URLs. For example, you can create an image map of the world in which each continent is hyperlinked to more information about the continent.

import

A method of transporting content and objects (for example, page groups, pages, and portlets) into an Oracle Portal instance. For example, you can import a page, its associated style, and its contents from one instance of Oracle Portal to another.

index

An optional structure associated with a table used to locate rows of the table quickly, and (optionally) to guarantee that every row is unique.

in-place editing

In Oracle Instant Portal, the ability to add items or pages in context, as opposed to having to create these objects elsewhere and then add them to the page or portal.

Integrated Development Environment

See IDE.

internal image name

The name used to identify an image that has been uploaded to the portal. Uploaded images can be reused within the portal by referencing their internal names.

internal provider

A type of provider that makes page group objects (pages, navigation pages, and so on) available to instances of Oracle Portal.

invalidation-based caching

A caching method where an item remains in the cache until it is explicitly invalidated. For example, a user may update an item, requiring the item in the cache to be invalidated. The next time there is a request for the invalidated item, it is refreshed in the cache

Oracle Web Cache uses both expiry-based caching and invalidation-based caching. Any data saved in Oracle Web Cache is considered valid until it is invalidated or it expires. When the information cached in Oracle Web Cache becomes inaccurate, it must be invalidated. For example, page metadata saved in Oracle Web Cache is invalidated when a page designer changes the page structure or when user privileges change. Likewise, a portlet instance is invalidated whenever it is personalized by an end user.

See also expiry-based caching and validation-based caching.

item

1. An individual piece of content (text, hyperlink, image, and so on) that resides on a page in an item region. Users with an appropriate privilege level can add items to a page. Item content and metadata are stored in the Oracle Portal schema of the Oracle Metadata Repository. Items are rendered on the page according to the layout, style, and attribute display defined for the item region.
See also item type.

2. In Oracle Instant Portal, the means through which content is added to a page. Available item types are rich text item, expandable rich text item, file item, URL item, email item, and image item.

item ID

The local database reference to the content of an item. An item ID value is used in custom item types to pass items to PL/SQL procedures. The function uses the item ID to access the content of the item.

item level security

See ILS.

item metadata

The stored information or attributes of an item.

item placeholder item

A type of item that a user can add to a page. An item placeholder identifies where the content from items that use a Portal Template for items will display in relation to the rest of the template content.

item type

An object that defines the contents of an item and the attributes that are stored (metadata) about an item. Base item types included with Oracle Portal are categorized as content item types and navigation item types.

Custom item types are item types created by page group administrators to extend the functionality provided by base item types and store additional attribute information about items.

item versioning

See versioning.

J2EE

Java 2 Platform, Enterprise Edition. A platform that enables application developers to develop, deploy, and manage multitier, server-centric, enterprise level applications. The J2EE platform offers a multitiered distributed application model, integrated XML-based data interchange, a unified security model, and flexible transaction control. You can build your own J2EE portlets and expose them through Web providers.

See also Oracle WebLogic Server.

J2SE

Java 2 Platform, Standard Edition. A platform that enables application developers to develop, deploy, and manage Java applets and applications on a desktop client platform such as a personal computer or workstation. J2SE not only defines API standards, but also specifies the deployment of enterprise applications, thus enabling application server administrators to perform the deployment regardless of the vendor of the J2SE server.

Java 2 Platform, Enterprise Edition

See J2EE.

Java 2 Platform, Standard Edition

See J2SE.

JavaScript

A scripting language developed by Netscape that enables generation of portlets that introduce dynamic behavior in otherwise static HTML. The Portlet Builder enables you to use JavaScript to create routines that validate entry fields in forms and personalization forms. You can also create JavaScript event handlers for entry fields and buttons on forms.

Java Specification Request

See JSR 168.

JavaServer Page

See JSP.

JSP

JavaServer Pages. An extension to servlet functionality that provides a simple programmatic interface to Web pages. JSPs are HTML pages with special tags and embedded Java code that is executed on the Web or application server. JSPs provide dynamic functionality to HTML pages. They are actually compiled into servlets when first requested and run in the servlet container.

See also JSP tags.

JSR 168

Java Specification Request (JSR) 168. Defines a set of APIs for building standards-based portlets using Java. Portlets built to this specification can be rendered to a portal locally or deployed to a WSRP container for rendering portlets remotely. For more information, see http://jcp.org/en/jsr/detail?id=168.

JSP tags

Tags that can be embedded in JSPs to enclose Java code. These tags use the <jsp: syntax and enclose action elements in the JSP with begin and end tags similar to XML elements.

keyword

An attribute used to provide additional information about a page or item so that users can easily locate the page or item during a search.

Layout view

A page editing view that enables you to add, arrange, and remove regions on the page. You can also hide, show, delete, or move content in this view.

Contrast with Graphical view and List view.

LBR

Load-balancing router. A very fast network device that distributes Web requests to a large number of servers. It provides portal users with a single published address, without their having to send each request to a specific middle tier server.

LDAP

Lightweight Directory Access Protocol. A standard for representing and accessing user and group profile information.

level

An object used to provide structure to mobile pages and as a way to limit the amount of content displayed on the smaller screens of mobile devices. Users drill down into the levels on a mobile page to view more content.

library

A collection of one or more PL/SQL or Java program units. Libraries can be referenced by several applications simultaneously.

Lightweight Directory Access Protocol

See LDAP.

Link mode

An optional portlet Show mode that enables portlets to render themselves on mobile devices, such as cellular telephones.

List view

A page editing view that displays a listing of all page content and provides options that enable you to perform actions (delete, move, copy, and so on) on multiple objects.

Contrast with Graphical view and Layout view.

list of objects item

A type of navigation item that a user can add to a page to list objects (for example, pages and perspectives) as a drop-down list or as links (with or without associated images).

list of values

See LOV.

load-balancing router

See LBR.

local provider group

The collection of providers that are defined within an instance of Oracle Portal. Provider groups make it easier to share providers defined or registered within one instance of Oracle Portal with other Oracle Portal instances.

See also provider group. Contrast with remote provider group.

lock

1. A setting automatically applied to a Portlet Builder portlet when it is being edited. The setting prevents other users from editing the portlet.

2. In WebDAV the action of preventing other users from editing a file. Locking a file in a WebDAV client checks out the corresponding item in the portal itself.

login/logout link item

A type of navigation item that a user can add to a page to enable other users to log in or log out of the portal.

LOV

List of values. A portlet created with the Portlet Builder that enables developers to add selectable values to entry fields in forms. A single list of values can be displayed in different formats, such as combo boxes, radio buttons, or check boxes.

Manage privileges

A privilege level on an Oracle Instant Portal page that allows the user to edit, move, or delete a top-level page and all its child pages. A user with Manage privileges on a portal's home page is considered an administrator of that portal. A user with Manage privileges also has all Contribute and View privileges.

manifest

The list of objects in a transport set and their dependents, which provides a granular level of control over the import mode.

master-detail form

A portlet created with the Portlet Builder that displays a master table row and multiple detail rows within a single HTML page. Values in the master row determine which detail rows are displayed for querying, updating, inserting, and deleting.

See also form.

master item ID

An identifier for an item that is the same for all versions of that item.

menu

A portlet created with Portlet Builder that displays a Web page containing options that end users can click to navigate to other menus, other Portlet Builder portlets, or URLs.

message payload

Provides details about CMEF events such as the portal action that triggered the event, the type of event (INSERT, UPDATE, or DELETE), and the state of the event.

metadata

Data that describes data. For example item attributes store item metadata, such as display name, description, and author.

middle tier

Part of the Oracle Fusion Middleware architecture that handles HTTP user requests by forwarding them to the appropriate portal database or provider, assembles portal pages, and manages caching of portal content.

MIME type

Multipurpose Internet Mail Extension type. A message format used on the Internet to describe the contents of a message. MIME is used by HTTP servers to describe the type of content being delivered.

mobile page

A type of page that enables page designers to produce pages specifically for mobile devices, for example, cellular phones.

Mobile Preview mode

A preview mode that enables you to preview how your page will look on a mobile device.

mobile XML

See Oracle Application Server Wireless XML.

Model-View-Controller

See MVC.

mod_weblogic

The Oracle HTTP Server module that manages the communication between the Oracle HTTP Server and Oracle WebLogic Server.

mod_plsql

The Oracle HTTP Server module that handles the database connections made from the Oracle HTTP Server. It enables PL/SQL database procedures to generate HTTP responses containing formatted data and HTML code that can display in a Web browser.

MVC

A classic design pattern often used by applications that need the ability to maintain multiple views of the same data. The MVC pattern hinges on a clean separation of objects into one of three categories: models for maintaining data, views for displaying all or a portion of the data, and controllers for handling events that affect the model or views. Because of this separation, multiple views and controllers can interface with the same model. Even new types of views and controllers that never existed before, such as portlets, can interface with a model without forcing a change in the model design.

navigation area

In Oracle Instant Portal, the area along the left side of the page in which the search box and a list of the page's child pages appear.

navigation item type

A means of providing navigation and access to portal-specific functions.

Built-in navigation item types include:

- smart link item

- smart text item

- login/logout link item

- basic search box item

- list of objects item

- object map link item

- page path item

- page function item

See also item type. Contrast with content item type.

navigation page

A special purpose page within a page group that is typically embedded on other pages or Portal Templates to implement standard user interface effects such as navigation bars and banners. Often contains navigation item types for navigation within the portal.

Navigator

A feature for locating objects and interacting with Oracle Portal. Provides access to objects to which the user has privileges, such as page groups, providers, and database objects.

New Content area

An area on the Oracle Instant Portal home page in which content added anywhere in the portal over the last 24 hours is gathered.

nondefault subscriber

A subscriber that has a stripe on a hosted Oracle Portal provided by an ASP.

object

1. Portal object: A structure such as a page group, portlet, page, or style.

2. Database object: An Oracle database structure such as a table, procedure, or trigger. These objects can be created using Oracle Portal wizards or Oracle database commands.

object map link item

A type of navigation item that a user can add to a page to display a map of objects that are available in the portal.

OEM

See Oracle Enterprise Manager.

OID

See Oracle Internet Directory.

OmniPortlet

A Web provider that provides portlets that can display spreadsheet, XML, and Web Service data as tabular, chart, news, bullet, and form layouts.

Oracle Metadata Repository

An Oracle database that contains schemas and business logic used by Fusion Middleware components (including Oracle Portal) and other pieces of the infrastructure.

Oracle Portal uses a schema within the Oracle Metadata Repository to store and manage the content and metadata associated with the portal instance. This is sometimes referred to as the content repository.

Oracle Portal

A component of Oracle Fussion Middleware used for the development, deployment, administration, and configuration of enterprise class portals. Oracle Portal incorporates a portal building framework with self-service publishing features to enable you to create and manage information accessed within your portal.

Oracle Portal Developer Kit

See PDK.

Oracle Application Server Single Sign-On

A component of Oracle Fussion Middleware that enables users to log in to all features of the Oracle Fusion Middleware product suite, as well as to other Web applications, using a single user name and password. Oracle Portal is integrated with Oracle Application Server Single Sign-On as a partner application and delegates authentication to it.

Oracle Web Cache

A component of Oracle Fussion Middleware that improves the performance, scalability, and availability of frequently used Web sites. By storing frequently accessed URLs in memory, Oracle Web Cache eliminates the need to repeatedly process requests for those URLs on the Web server. Oracle Web Cache uses invalidation-based caching and is integrated with Oracle Portal for improved performance.

See also portal cache.

Oracle Application Server Wireless

A component of Portal used to deliver information and applications to mobile devices. Using Oracle Application Server Wireless, you can create custom portal sites that use different kinds of content, including Web pages, custom Java applications, and XML-based applications. Oracle Application Server Wireless sites make this diverse information accessible to mobile devices without your having to rewrite the content for each target device platform.

Oracle Application Server Wireless XML

A device independent markup language used for communication between Oracle Portal and Oracle Application Server Wireless.

Oracle Portal

See Oracle Portal.

Oracle Portal Verification Service

(Previously known as Portal Studio). A major component of Portal Center (http://www.oracle.com/technology/products/ias/portal) that is specifically tuned to the needs of the portal developer. This site provides developers a way to test and display remote portlets exposed as Web or WSRP providers without having to install their own copy of Oracle Portal. Developer's portlets reside on their servers and must be accessible over the Internet. You can access Oracle Portal Verification Service directly at http://portalstandards.oracle.com/portal/page/portal/OracleHostedWSRPPortal/Welcome.

Oracle Enterprise Manager

See Oracle Enterprise Manager.

Oracle HTTP Server

The Web server component of Oracle Fusion Middleware, built on Apache Web server technology and used to service HTTP requests. It is the part of the middle tier that handles requests between the Web and Oracle Portal. Extensions to the Oracle HTTP Server support Java servlets, JSPs, Perl, PL/SQL, and CGI applications.

Oracle Instant Portal

A product built on top of OracleAS Portal, designed to provide a common place to share and exchange content for smaller groups of users.

Oracle Instant Portal administrator

A user who has full privileges over the entire portal. Any user with Manage privileges on the portal's home page is considered an Oracle Instant Portal administrator for that portal. The PORTAL and ORCLADMIN users, created during the installation process, are Oracle Instant Portal administrators for all portals. Only an Oracle Instant Portal administrator can change the banner or style, manage users, and create new top-level pages.

Oracle Internet Directory

The repository for storing Oracle Portal user credentials and group memberships. By default, the Oracle Application Server Single Sign-On authenticates user credentials against Oracle Internet Directory information about dispersed users and network resources. Oracle Internet Directory combines LDAP version 3 with the high performance, scalability, robustness, and availability of the Oracle database.

Oracle JDeveloper

Oracle JDeveloper is an integrated development environment (IDE) for building applications and Web services using the latest industry standards for Java, XML, and SQL. Developers can use Oracle JDeveloper to create Java portlets.

Oracle PartnerNetwork Solutions Catalog

(http://solutions.oracle.com/) A collection of information on Oracle Partner joint products and services. The Solutions Catalog includes information on partners who offer Oracle Portal related products and services.

Oracle Streams Advanced Queuing

Oracle Streams Advanced Queuing (AQ) provides database-integrated message queuing functionality. It is built on top of Oracle Streams and leverages the functions of the Oracle database so that messages can be stored persistently, propagated between queues on different computers and databases, and transmitted using Oracle Net Services and HTTP(S).

Oracle Technology Network

See OTN.

Oracle Text

A feature of Oracle9i and later that provides advanced search and retrieval services on content stored in an Oracle repository. It is fully integrated into Oracle Portal to provide users with the ability to perform a full text search and retrieve content managed within the Oracle Portal schema of the Oracle Metadata Repository. It also provides automatic grouping and classification of results by gist and theme.

Oracle Ultra Search

An Oracle Text-based application that supports crawling, indexing, and federated searching of multiple, heterogeneous repositories including databases, file systems, Web servers, and e-mailing list archives.

Contrast with search portlet.

Oracle WebLogic Server

A scalable, enterprise-ready Java Platform, Enterprise Edition (Java EE) application server. The WebLogic Server (WLS) infrastructure supports the deployment of many types of distributed applications and is an ideal foundation for building applications based on Service Oriented Architectures (SOA). SOA is a design methodology aimed at maximizing the reuse of application services.

The WebLogic Server complete implementation of The Sun Microsystems Java EE 5.0 specification provides a standard set of APIs for creating distributed Java applications that can access a wide variety of services, such as databases, messaging services, and connections to external enterprise systems. End-user clients access these applications using Web browser clients or Java clients.

Oracle Workflow

Oracle Workflow enables you to automate and continuously improve business processes, routing information of any type according to easily-changeable business rules to users both inside and outside a company's enterprise.

OTN

Oracle Technology Network. The online Oracle technical community that provides a variety of technical resources for building Oracle-based applications. You can access OTN at http://www.oracle.com/technology/.

Overwrite mode

See Replace on Import mode.

package

A database object consisting of a PL/SQL specification and a body. The specification includes the data types and subprograms that can be referenced by other program units. The body includes the actual implementation of the package.

page

A portal object that contains portlets and items. Each time you display a page, it is dynamically assembled and formatted according to the portlets and layout chosen for that page.

See also page type.

page designer

A user with the Manage privilege on a page (also known as a page manager). A user with this privilege can perform any action on the page and can create sub-pages under the page. The page designer is often responsible for designing the layout (or region configuration) of the page and assigning privileges on the page to other users (for example, to determine who can add content to the page).

The scope of a page designer's control over a page may be limited if the page is based on a template.

page function item

A type of navigation item that a user can add to a page. A page function is a procedure call that a user can add to a custom page type. If there are no page functions associated with the current page, the page function item does not display.

page group

A portal object that groups and sets properties of related portal objects, such as pages, styles, navigation pages, and perspectives. Page groups typically contain a hierarchy of pages and sub-pages for organizing content.

page group administrator

A user who has full privileges over an entire page group. Page group administrators set up and maintain the page group; designate page owners; and create a taxonomy. Page group administrators can also view and manage all the pages in the page group.

page group map

A hierarchical representation of all page groups in a portal, which enables users to access individual pages within the page group. The page group map is tailored for each user; only the pages the user is authorized to view or edit are displayed.

page group quota

See quota.

page link item

A type of item that a user can add to a page. A page link provides a route using a hyperlink to another page within the portal. When the user clicks the display name link, the page referenced by the item is displayed in the user's browser.

page manager

See page designer.

page metadata

Stored information or attributes about a page, which is used by Oracle Portal to set its layout and cache.

page path item

A type of navigation item that a user can add to a page. A page path is a chain of page reference names. Page paths, often called breadcrumbs, describe the complete directory path.

page toolbar

In page Edit mode, the links at the top of the page that enable you to edit various aspects of the page, switch editing views (for example, from Graphical view to Layout view), edit page group properties, and so on.

page type

A portal object that defines the content of a page and the information that is stored about a page. Base page types included with Oracle Portal are: standard page, mobile page, PL/SQL page, JSP, and URL page. Custom page types are page types created by page group administrators to extend the functionality provided by base page types and store additional information about pages.

Parallel Page Engine

See PPE.

parameter

A value passed between pages and portlets, or between portlets.

A page parameter is a page level parameter (created by a page designer) whose values can be mapped to portlet parameters.

A portlet parameter is declared by a provider. Page designers map page parameters to portlet parameters. When the PPE requests a portlet from a provider, only the portlet parameters that the portlet declared and mapped to page parameters are sent.

parameter entry field

A field on a personalization form that enables end users to enter values that will be passed to an Oracle Portal portlet.

partial page caching

See PPC.

partner application

An application that has delegated its authentication to Oracle Application Server Single Sign-On. If registered with the OracleAS Single Sign-On Server, users can log in to multiple partner applications using a single log in page. In a given session, once users have been authenticated by the OracleAS Single Sign-On Server, they won't need to log in again to access additional partner applications.

path aliasing

See path-based URL.

path-based URL

A path-based URL identifies the path taken through the portal to get to a particular object. It is an easy-to-read URL but as it contains the names of portal objects, the URL becomes invalid if the name of any object within the path changes.

For example, the path-based URL to access a top-level page (sample_page) of the page group MyPageGroup:

http://mymachine.mycompany.com:5000/portal/page/mydad/MyPageGroup/sample_page

Contrast with durable URL.

PDK

Oracle Portal Developer Kit. The development framework used to build and integrate Web content and applications with Oracle Portal. It includes toolkits, samples, and technical articles that help make portal development simple. You can take existing Java servlets, JSPs, URL-accessible content and Web Services and turn them into portlets. It is typically used by external developers and vendors to create portlets and services. The PDK is regularly updated on Portal Center (http://portalcenter.oracle.com/) to provide developers with the latest tools and techniques.

See also PDK-Java, PDK-PL/SQL, and PDK-URL Services.

PDK-Java

A toolkit for implementing portlets in Java and adding portal features. Used to declaratively turn your existing Java servlets, JSPs, and Web services into portlets.

See also PDK. Contrast with PDK-PL/SQL.

PDK-PL/SQL

A set of articles, samples, and services that enable PL/SQL programmers to easily create portlets and extend them by using PL/SQL APIs.

See also PDK. Contrast with PDK-Java.

PDK-URL Services

A utility for declaratively turning secured and public Web content into portlets. These services are capable of dynamically passing parameters to target URLs, clipping and reformatting content, and providing Oracle Application Server Single Sign-On for applications requiring form-based or basic authentication. These services also allow developers to take any application written in any language and easily create integrated portlets. PDK-URL Services takes the URL of an application, parses the content, and uses the PDK-Java framework to create a portlet.

See also PDK.

Pending Approvals Monitor

A portlet that enables you to list pending approvals in the page groups that you administer. You can list the pending approvals by approver, date, page group, or submitter.

Pending Items Preview mode

A preview mode that enables you to view items that are awaiting approval. This mode can be used by content contributors to preview items they have added before they are approved, and by approvers to preview items before they approve or reject them.

See also Edit mode.

personalization form

A page that prompts end users for values to pass to a Portlet Builder portlet. End users can view the personalization form for a portlet, if one has been created, by clicking the portlet's Personalize link.

personal page

An area within Oracle Portal where authenticated users can store personal content and share it with other users. The portal administrator can choose to create a personal page for a user when creating a user account.

perspective

A cross-category grouping of items. Perspectives help users answer the question, Who will be interested in this item? For example, you can add links to diverse vacation spots around the world and assign perspectives like Vacations for Nordic Enthusiasts, Archeology Expeditions, and Extreme Vacations for Adventurers to items about vacation types. Users publishing content using an item type that includes a perspective attribute may specify none, one, or many values.

Contrast with category.

PL/SQL item

A type of item that a user can add to a page. A PL/SQL item contains a block of PL/SQL code. When a user clicks the item, the code is executed. The result displays in the user's browser. PL/SQL items can also be displayed directly on the page.

PL/SQL function

See function.

PL/SQL page

A type of page. PL/SQL pages contain PL/SQL code that generates HTML when the page is rendered.

plug-in

See extension.

poll

A set of questions used to find out information from users.

Contrast with survey and test.

portal

A common interface (that is, a Web page) that provides a personalized, single point of interaction with Web-based applications and information relevant to individual users or class of users. Portals built using Oracle Portal are made up of pages managed within page groups, containing portlets and items.

portal administrator

A user with the highest level of privileges in Oracle Portal. Portal administrators can view and modify anything in Oracle Portal, even pages and database providers marked private. (The only exception is groups: although portal administrators can modify the PORTAL_ADMINISTRATORS and PORTAL_PUBLISHERS groups, they cannot modify any other group unless they have been named group owner.)

Portal Builder page

A predefined page that contains development and administrative portlets used to build and manage portal objects and services.

portal cache

A mechanism for storing cache entries for objects that use validation-based caching. It also acts as a backup to the memory-based Oracle Web Cache when objects use both validation-based caching and invalidation-based caching.

Portal Catalog

See Oracle PartnerNetwork Solutions Catalog.

Portal Center

(http://portalcenter.oracle.com/) A Web site where you can find out everything you want to know about Oracle Portal. Updated frequently, it always has the latest product information, and is home to the Portal Developer Services and Oracle Portal Verification Service. This Web site contains all information about the product (including documentation, demonstrations, and so on), and provides access to Oracle Portal expertise.

Portal Community

A network of people dedicated to creating and exchanging information about Oracle Portal. This community includes anyone who uses Oracle Portal; it can leverage the Portal Knowledge Exchange for sharing Portal-related information and take advantage of the Portal Developer Services.

Portal DB provider

See database provider.

Portal Developer Kit

See PDK.

Portal Developer Services

The network of people dedicated to creating and exchanging Oracle Portal expertise. This program provides online testing tools through Portal Center (http://portalcenter.oracle.com/), as well as other venues, and interaction with the product team and other portal developers, using newsletters, surveys, and the Portal Knowledge Exchange.

See also Portal Community.

Portal Knowledge Exchange

A self-service Web site where subscribers to the Portal Developer Services can share white papers, techniques, and portlets with others in the Portal Community. Contributions can also be rated so that the most valuable contributions can be easily located.

portal page

See page.

portal repository

See Oracle Metadata Repository.

Portal Services

A set of services running in the Oracle Portal instance that are used to assemble portal pages and to access portal and page metadata. The Parallel Page Engine (PPE) is one of the Portal Services that assembles portal pages. Other services, like those previously provided by mod_plsql, are incorporated into the Portal Services as well.

portal session

A period of interaction between a browser and Oracle Portal, from the initial access to log off, closure of the browser window, or expiration of the session after a period of inactivity.

Portal smart link item

See smart link item.

Portal smart text item

See smart text item.

Portal Studio

See Oracle Portal Verification Service.

Portal Template

A portal object built declaratively using a wizard that enforces specific layouts, colors, fonts, and backgrounds for pages and items. You can use Portal Templates with navigation pages, standard pages, and pages based on custom page types that are based on the standard page type. You can also use Portal Templates with text items, PL/SQL items, URL items, and all file items with a MIME type of text/html or text/plain.

Contrast with HTML Template.

portlet

A reusable, pluggable Web component that typically displays portions of Web content. Portlets are the fundamental building blocks of a portal page. Using the Portlet Builder, you can easily create your own portlets. Oracle Portal also provides several ways to build portlets programmatically and to integrate any kind of Web content. Portlets may be implemented using various technologies, such as Java, JSPs, Java servlets, PL/SQL, Perl, ASP, and so on. The PDK covers the standard-based portlet development options that Oracle Portal provides.

Portlet Builder

A collection of portlet-building wizards that are accessible through the Provider tab in the Portal Navigator. You can use these wizards to build charts, forms, reports, calendars, and lists of values.

portlet instance

A portlet placed on a particular page.

portlet provider

See provider.

portlet publisher

A user who can publish portal objects (pages or otherwise) as portlets so that they can be included on pages.

portlet record

A programmatic structure that contains detailed information about a portlet, such as its implementation style and Show mode (PL/SQL).

Portlet Repository

A special page group that contains the portlets available from the local providers and any registered remote providers. When you register a provider, the provider and its portlets are added to the Portlet Repository.

PPC

Partial Page Caching. A feature that enables Oracle Web Cache to independently cache and manage fragments of HTML documents. A template page is configured with Edge Side Includes (ESI) markup tags that tell Oracle Web Cache to fetch and include the HTML fragments. The fragments themselves are HTML files containing discrete text or other objects.

PPE

Parallel Page Engine. A multithreaded servlet engine that runs in the Portal and services page requests. The PPE reads page metadata, calls providers for portlet content, accepts provider responses, and assembles the requested page in the specified page layout. The Parallel Page Engine is part of the Portal Services, which run on the Oracle Fusion Middleware middle tier.

pretty URL

See path-based URL.

Preview mode

An optional portlet Show mode that provides users with a preview of the portlet before they add it to a page.

primary key

One or more columns in a database table that, in combination, uniquely identify a row in a table.

privilege

In Oracle Portal, the right to perform an action. Privileges are either global (set through in the User or Group Profile) or specific to particular objects (usually set through the object's Access tab). When building applications, access can also be granted to database objects, shared portlets, portlets, and applications.

producer

See provider.

profile

The information stored about an Oracle Portal user or group, such as password, user ID, and privileges.

property sheet

A built-in attribute that displays a summary of an item's attributes or a page's properties.

provider

The communication link between Oracle Portal and a portlet. There are two types of providers: Web providers and database providers. Web providers may reside anywhere on the network and are addressed through SOAP. Web providers may be implemented using any Web technology. You can build your own Web providers by using the PDK-Java and the PDK-URL Services. Database providers reside within an Oracle database and manage portlets while performing data-intensive operations.

Providers act as containers for portlets; each portlet communicates with Oracle Portal through its provider. Providers also manage the portlets they contain.

provider definition

A declarative, XML-based configuration file (provider.xml) that describes a Web provider, its portlets, and the location of the content to be displayed in the portlets. This configuration file also describes the behavior of the provider and its portlets.

provider group

A logical collection of Web providers defined by a provider group service. A portal administrator can register provider groups for use with their portal. Once registered, a provider group simplifies the process of registering individual providers in the group. This enables organizations that create Web providers to publish registration details of their providers and facilitate automatic registration with any Oracle Portal instance. The only information that must be given to the portal administrator is the name and location of the provider group.

See also local provider group and remote provider group.

provider record

The record returned by a database provider containing specified information about a portlet.

proxy server

A proxy server typically sits on a network firewall and enables clients behind the firewall to access Web resources. All requests from clients go to the proxy server rather than directly to the destination server. The proxy server forwards the request to the destination server and passes the received information back to the client. The proxy server channels all Web traffic at a site through a single, secure port; this enables an organization to create a secure firewall by preventing Internet access to internal machines, while allowing Web access.

public page

Any page in a page group that is viewable by public users (users who are not logged onto Oracle Portal). The page designer or page group administrator must explicitly designate a page as public.

public user

A user who can access, but is not logged onto, Oracle Portal. When users first access Oracle Portal, they do so as public users, whether or not they have the ability to log on. A public user can view any page that has been marked as public, but cannot personalize or edit any content, or view pages that have any form of access control.

Contrast with authenticated user.

purge

See system purge.

query

A SQL SELECT statement that specifies which data to retrieve from one or more tables or views in a database.

queue

The abstract storage unit used by a messaging system, such as CMEF, to store messages.

quota

The amount of space provided in a page group or in the Oracle Portal schema of the Oracle Metadata Repository to store uploaded documents.

recent object

A portal object, such as a page or portlet, that has recently been displayed or edited. Each authenticated user has his or her own Recent Objects portlet that provides links to the last n objects accessed.

referenced object

An object which is directly or indirectly referenced by an explicit object.

See also manifest.

reference path

The path that uniquely identifies a portlet instance on a page. A reference path can be used to target parameters to individual portlets on a given page.

region

A carved-out area on a standard page used to define the page layout, define page content (portlets and items), and control the style and attributes for content displayed in a region. A standard page can have one or multiple regions. Regions can be created above, beneath, or beside other regions.

You can create the following types of regions:

- Undefined regions are regions that have not been assigned a particular type.

- Item regions allow you to add items such as text, images, files, and so forth.

- Portlet regions allow you to include portlets in a region.

- Sub-Page Links regions allow you to display a list of the current page's sub-pages in a region.

- Tab regions allow you to include tabs in a region.

region banner

A colored, horizontal bar with a title displayed in a region of a portal page. A banner breaks up the visual flow of a page and groups related items that appear beneath it.

remote database

A database running on a separate machine that can be accessed over the network through a connect string or database link.

remote provider group

The collection of providers that are defined outside of your local instance of Oracle Portal.

See provider group. Contrast with local provider group.

Replace on Import mode

An import mode. When this option is selected, if the object exists on the target, then it is replaced. If the object does not exist then it is created. When this option is not selected, if the object exists on the target, it is referenced. If it does not exist on the target, it is created.

report

A portlet created with the Portlet Builder that displays the results of a SQL query in a tabular format.

Reuse mode

See Replace on Import mode.

rich text editor

A WYSIWIG editor that enables content contributors to easily apply formatting to text items.

rich text item

One of the available items in Oracle Instant Portal, designed for smaller blocks of text. A rich text item appears on the page as a title, a summary, and the full text of the item. Compare to expandable rich text item, in which the text is hidden until the user clicks an icon. Both expandable rich text and rich text items may contain images, hyperlinks, and tables, as well as any valid HTML code.

root page

The top level of the page hierarchy in a page group; it contains all other sub-pages in the page group. Also known as the page group's home page.

routing method

A mechanism for organizing an approval process. Oracle Portal provides three approval routing methods:

- All, Parallel enables Oracle Portal to send the approval to recipients in the step all at the same time. All of the recipients must respond to the approval before the item approval can move to the next step.

- All, Serial enables Oracle Portal to send the approval to recipients in the step one at a time in the sequence specified. All of the recipients must respond to the approval before the item approval can move to the next step.

- Any, Parallel enables Oracle Portal to send the approval to recipients in the step all at the same time. However, only one of the recipients must respond to the approval before the item approval can move to the next step.

row

A set of values in a table; for example, the values representing one employee in the SCOTT.EMP table.

saved search

A mechanism for saving search criteria under a single name. This feature enables you to repeat the search quickly, by choosing the saved search name rather than re-entering the criteria manually. You can save the results of a basic search, advanced search, or custom search. The Saved Searches portlet lists all the saved searches in a page group.

schema

A collection of database objects, including logical structures such as tables, views, sequences, stored procedures, synonyms, indexes, clusters, and database links. A schema has the name of the user who controls it.

search portlet

A portlet that enables users to search for pages and content within the Oracle Portal schema of the Oracle Metadata Repository. Users can also search based on text strings, categories, perspectives, and attributes, and using operators such as CONTAINS, GREATER THAN, LESS THAN, and EQUAL TO.

Contrast with Oracle Ultra Search.

secure view

A view on the data in the content repository that is guaranteed to not change between releases. You should use the secure views to query data on the documents and items stored in the content repository to ensure that those queries will continue to work with later releases of Oracle Portal.

self registration

A mechanism that allows users to create new accounts for themselves through a link in the Login portlet.

sequence

A database object used to automatically generate numbers for table rows.

servlet

A Java program that usually runs on a Web server, extending the Web server's functionality. HTTP servlets take client HTTP requests, generate dynamic content (such as through querying a database), and provide an HTTP response.

session

See portal session.

shared object

A portal object such as a personal page, navigation page, style, Portal Template, perspective, category, or custom type that can be shared across page groups.

shared portlet

A portlet created with the Portlet Builder that is shared between other Portlet Builder portlets. Each shared portlet can be displayed on multiple pages with the same personalization.

Shared Screen mode

A portlet Show mode that renders the body of the portlet. Every portlet must have at least a Shared Screen mode.

Show mode

The ways by which a portlet can be called to display information. These methods include:

- Shared Screen mode

- Edit mode

- Edit Defaults mode

- Preview mode

- Help mode

- About mode

- Link mode

- Full Screen mode

simple file item

Similar to a file item except with fewer attributes, which makes it quicker and easier to create.

simple image item

Similar to an image item except with fewer attributes, which makes it quicker and easier to create.

Simple Object Access Protocol

See SOAP.

simple page link item

Similar to a page link item except with fewer attributes, which makes it quicker and easier to create.

simple PL/SQL item

Similar to a PL/SQL item except with fewer attributes, which makes it quicker and easier to create.

simple text item

Similar to a text item except with fewer attributes, which makes it quicker and easier to create.

simple URL item

Similar to a URL item except with fewer attributes, which makes it quicker and easier to create.

Single Sign-On

See Oracle Application Server Single Sign-On.

smart link item

A type of navigation item that is self-configuring. For example, if you add a Home smart link to a navigation page, when a user clicks the Home link, he or she is automatically taken to his or her home page.

smart text item

A type of navigation item that is self-configuring. For example, if you add a Current Date smart text item to a navigation page, the current date is automatically pulled from the server and does not need to be specified (through complex coding) by you.

snapshot

A table that contains the results of a query on one or more tables, called master tables, in a remote database.

snapshot log

A table associated with the master table of a snapshot tracking changes to the master table.

SOAP

Simple Object Access Protocol. A lightweight, XML-based protocol for exchanging information in a decentralized, distributed environment. SOAP supports different styles of information exchange, including: Remote Procedure Call style (RPC) and Message-oriented exchange. RPC style information exchange allows for request-response processing, where an endpoint receives a procedure-oriented message and replies with a correlated response message. Message-oriented information exchange supports organizations and applications that need to exchange business or other types of documents where a message is sent but the sender may not expect or wait for an immediate response.

SSL accelerator card

A hardware device that handles traffic much faster than regular SSL software.

See also LBR.

SSO

See Oracle Application Server Single Sign-On.

standard page

A type of page used to contain and manage items and portlets.

state

In the context of CMEF, the state of an event provides additional information about that event so that developers can correctly determine what a subscriber should do when a portal action triggers an event with that particular state.

stored procedure

A set of PL/SQL procedures that are stored in a database.

stripe

A secure slice on a virtual private portal that is assigned to a particular subscriber.

structured UI template

A shared portlet that controls the look and feel of Portlet Builder portlets and runs in standalone mode. Structured UI templates display the same image and text in the same location around every portlet that uses the template.

See user interface (UI) template. Contrast with unstructured UI template.

struts

A development framework for Java servlet applications based upon the MVC design paradigm.

style

A set of values and parameters that controls the colors and fonts of pages and regions. Style settings include font style, size, color, alignment, and background color. Styles can be created for a specific page group or as a shared object that is used by pages within multiple page groups.

sub-category

A category that appears hierarchically beneath another (parent) category. This provides a way of grouping closely related categories together.

sub-item

An item that appears hierarchically beneath another (parent) item. This provides a way of grouping closely related items together, for example, the spreadsheet that is used by a particular HTML file item could be added as a sub-item of the HTML file item.

sub-page

A page that appears hierarchically beneath another (parent) page. Every page in a page group (except the root page) is a sub-page.

sub-perspective

A perspective that appears hierarchically beneath another (parent) perspective. This provides a way of grouping closely related perspectives together.

subscriber

In the context of CMEF, a subscriber consumes messages from the WWSBR_EVENT_Q queue and performs actions based on those messages.

In the context of hosted portals, a subscriber is a company that signs up with an ASP and receives a stripe on a hosted Oracle Portal.

subscription notification

A method by which end users can subscribe to a particular page or item so that they are notified (through the My Notifications portlet) when that page or item is updated. The page designer must include a Subscribe Portal smart link item for users to be able to subscribe to a page, and must display the Subscribe attribute for users to be able to subscribe to items. Additionally, the page group administrator must enable approvals and notifications for the page group.

substitution tag

A special portal tag used within HTML Templates and unstructured UI templates to dynamically embed titles, headings, and other elements into the template.

survey

A set of questions used to find out information from users. Surveys can redirect users to different sections of the survey depending on their answers to particular questions.

Contrast with poll and test.

synonym

An additional name assigned to a table or view that can thereafter be used to refer to it.

system level caching

A caching method where a single copy of an item is stored in the cache (on the middle tier) for all users. Consequently, such items cannot be user specific. All users see the same content for the item.

Contrast with user level caching.

system purge

A process that deletes all items in a page group from the Oracle Portal schema of the Oracle Metadata Repository that are marked as deleted or expired. System purges are performed by the page group administrator or portal administrator.

tab

An area on a page used to increase the amount of content that the page can display by effectively doubling (or tripling, quadrupling, and so on) the amount of real estate available. Tabs also allow you to group content that is common to a subject area, organization, specific role, and so forth.

table

The basic storage structure in a relational database.

tablespace

The allocation of space in the database.

template

See HTML Template, Portal Template or user interface (UI) template.

temporary tablespace

The allocation of space in the database used for the creation of temporary table segments for operations such as sorting table rows.

test

A set of questions used to assess a user's understanding of a particular subject or subjects. You can provide the correct answer for questions and assign each question a score. You can also hand score essay-type answers.

Contrast with poll and survey.

text item

A type of item that a user can add to a page. When you create a text item, you enter text (up to 32KB) in the Item Wizard. The text block is then stored in the Oracle Portal schema of the Oracle Metadata Repository.

theme

A snapshot generated by Oracle Text that describes a document. Rather than searching for documents that contain specific words or phrases, users can use Oracle Text to search for documents that are about a certain subject, even if that subject is not mentioned explicitly in the document.

title

See display name.

top-level page

An Oracle Instant Portal page represented by a tab in the portal's tab set. May contain one or more child pages. Page privileges applied to a top-level page are also applied to all its child pages.

translation

A page group rendered in another language. When a page group administrator creates a translation, content contributors can add content in that language. Page group users can also view the translated content by setting their language to one of the supported languages.

transport set

A collection of portal objects for export or import. It can contain more than one object of a particular type, such as multiple page groups and multiple pages.

trigger

A database object associated with a table. It executes before or after one or more specified events.

Ultra Search

See Oracle Ultra Search.

Uniform Resource Locator

See URL.

unstructured UI template

A shared portlet that is used to insert content and HTML code to control the look and feel of Portlet Builder portlets. Unstructured UI templates are based on HTML code that, when executed, dynamically embeds titles, headings, and other elements that make up a page.

See also substitution tag and user interface (UI) template. Contrast with structured UI template.

URL

Uniform Resource Locator. A compact string representation of the location for a resource that is available through the Internet. It is also the format Web clients use to encode requests to Oracle WebLogic Server.

URL item

A type of item that a user can add to a page. A URL item, when clicked, provides a route to another Web page. When a user clicks the URL item's display name, the Web page referenced by the URL displays.

In Oracle Instant Portal, a URL item is represented on the page by a globe and, optionally, a title and summary. When the user clicks the globe, the location specified in the item opens in a secondary browser window.

URL page

A type of page that provides a route to another Web page, identified by its URL. When a user clicks the page link, the Web page referenced by the link is displayed.

URL portlet

A portlet created with the Portlet Builder that displays the contents of a Web page specified by a URL.

user interface (UI) template

A shared portlet that controls the look and feel of Portlet Builder portlets in full page display mode. Selecting a UI template when you are building a portlet automatically selects a title on the page where the portlet is displayed, a title background, links to other Web pages, and background colors and images.

See also structured UI template and unstructured UI template. Contrast with HTML Template and Portal Template.

user level caching

A caching method where a copy of an item is stored in the cache (on the middle tier) for each user. Consequently, users may see different content for the same item.

Contrast with system level caching.

validation-based caching

A caching method that uses a validation check to determine if the cached item is still valid. This is the caching method used by the portal cache. Before an item in the portal cache is used, the PPE contacts the portal repository or the provider that the content came from to determine if the cached item is still valid.

Contrast with expiry-based caching and invalidation-based caching.

versioning

A mechanism that allows multiple versions of an item to simultaneously exist in the Oracle Portal schema of the Oracle Metadata Repository. This feature is useful for tracking document changes from one version to the next or for reverting to a previous version if necessary.

view

A virtual table whose rows do not actually exist in the database, but which is based on a table that is physically stored in the database.

View mode

The runtime view of a page.

Contrast with Edit mode.

View privileges

A privilege level on an Oracle Instant Portal page that allows the user to view content on the page. All users may navigate pages, select items for the Favorite Content area of the home page, and search for content.

virtual private database

See VPD.

virtual private portal

Features for hosting multiple companies or multiple organizations securely within the same portal instance.

VPD

Virtual Private Database. A feature for ASPs that want to leverage the Oracle database to host their customers. Essentially, it uses one physical database instance for all customers, but to each customer it looks as if they have their own database. Users cannot see any information that is not meant for them and complete customer isolation is achieved. It requires little to no changes in the core application to take effect as most of the work is done at the database level. Implementing VPD basically requires two key steps: adding a context column (for example, company name) to all the database tables, and implementing a policy to restrict queries on each table based on the context of the logged in user. VPD provides highly secure, full subscriber isolation using this method.

WAP

Wireless Application Protocol. A set of open, global protocols for developing applications and services that use wireless networks.

Web Cache

See Oracle Web Cache.

Web clipping

A feature that enables page designers to collect Web content into a single centralized portal. It can be used to consolidate content from hundreds of different Web sites scattered throughout a large organization.

WebDAV

Web-based Distributed Authoring and Versioning. A protocol extension to HTTP 1.1 that supports distributed authoring and versioning. With WebDAV, the Internet becomes a transparent read and write medium, where content can be checked out, edited, and checked in to a URL address.

Web Services for Remote Portlets

See WSRP.

Web provider

An entity that is called, using an HTTP request, by Oracle Portal and returns portlet content in HTML, XML, or WSRP. A Web provider acts as a proxy for one or more portlets that are defined within a particular application environment (for example, Java, ASP, or Perl) and executed as applications external to Oracle Portal. Web providers are particularly appropriate for Web-accessible information sources.

See also provider. Contrast with database provider.

Web server

A program that delivers Web pages.

Wireless Application Protocol

See WAP.

Wireless Markup Language

See WML.

wireless portal

A portal accessible from wireless devices, such as cellular telephones.

See also Oracle Application Server Wireless.

wizard

A graphical interface that guides a user step-by-step through a process. In Oracle Portal, wizards are used for creating database providers, portlets, database objects, pages, page groups, and items.

WML

Wireless Markup Language. An XML-based markup language used to define hypertext-like content and applications for handheld devices.

WSRP

Web Services for Remote Portlets (WSRP). A Web services standard that allows the plug-and-play of visual, user-facing Web services with portals or other intermediary Web applications. Being a standard, WSRP enables interoperability between a standards-enabled container based on a particular language (such as JSR 168, .NET, Perl) and any WSRP portal. So, a portlet (regardless of language) deployed to a WSRP-enabled container can be rendered on any portal that supports this standard.

XML

Extensible Markup Language. An open standard for describing data using a subset of the SGML syntax.

XML portlet

An Oracle Portal portlet that displays the executed results of XML code. To create the portlet, you either specify XML code or a URL that points to the XML code.

XSL

Extensible Stylesheet Language. The language used within stylesheets to transform or render XML documents.

zip file item

A type of item that a user can add to a page. Zip file items enable you to upload many files in a single operation. You can use them to migrate the contents of a file system or Web site into the Oracle Portal schema of the Oracle Metadata Repository. When you upload a zip file to Oracle Portal, then unzip the uploaded file, a page is created for each directory and an item is created for each file. The items are published in the target page.

Index

A  B  C  D  E  F  G  H  I  J  L  M  N  O  P  Q  R  S  T  U  V  W  X

A

About mode, 6.1.1.7

access control lists

see ACLs

ACLs, 7.2.7.4

portlet privileges, 7.2.7.4

privileges, 7.2.7.4

provider privileges, 7.2.7.4

add_category API, 12.3

add_content_area API, 12.1

add_folder API, 12.2

add_item API, 12.4, 12.4

add_item_ils_privileges API, 15.3.1

add_item_post_upload API, 12.4

add_perspective API, 12.3

ADF, 7.3.3

Apache struts

creating a portlet, 7.3.2

overview, 7.3.1.2

APIs, 1.4.7

providing access to, 9.3

supported, 9.2, F.1

wwctx_api.get_nls_language, 9.5.2, 14.2

wwctx_api.set_context, 10.1

wwctx_api.set_nls_language, 14.3

wwpro_invalidation_api.execute_cache_invalidation, 9.4.3

wwsbr_api.add_category, 12.3

wwsbr_api.add_content_area, 12.1

wwsbr_api.add_folder, 12.2

wwsbr_api.add_item, 12.4, 12.4

wwsbr_api.add_item_ils_privileges, 15.3.1

wwsbr_api.add_item_post_upload, 12.4

wwsbr_api.add_perspective, 12.3

wwsbr_api.approve, 16.7

wwsbr_api.check_in_item, 11.2.3

wwsbr_api.check_out_item, 11.2.3

wwsbr_api.clear_cmef_context, 9.4.5

wwsbr_api.copy_folder, 11.4.2

wwsbr_api.copy_item, 11.4.1

wwsbr_api.delete_folder, 11.5.2

wwsbr_api.delete_ils_privilege, 15.3.2

wwsbr_api.delete_item, 11.5.1

wwsbr_api.enable_ils_for_item, 15.3

wwsbr_api.inherit_folder_privileges, 15.3.3

wwsbr_api.modify_folder, 11.1

wwsbr_api.modify_item, 11.2.2

p_addnewversion, 11.2.4

wwsbr_api.modify_item_post_upload, 12.4

wwsbr_api.move_category, 11.3.3

wwsbr_api.move_folder, 11.3.2

wwsbr_api.move_item, 11.3.1

wwsbr_api.move_perspective, 11.3.3

wwsbr_api.reject, 16.7

wwsbr_api.set_attribute, 11.2.1

wwsbr_api.undelete_item, 11.5.1

wwsbr_api.upload_blob, 12.4

wwsec_api.grantee_list, 15.1

wwsec_api.remove_group_acl, 15.2.2

wwsec_api.remove_user_acl, 15.2.2

wwsec_api.set_group_acl, 15.2.1

wwsec_api.set_user_acl, 15.2.1

wwsrc_api.get_all_items_xml, 13.4.3

wwsrc_api.get_item_xml, 13.4.4

wwsrc_api.item_search, 13.1

wwsrc_api.page_search, 13.2

wwsrc_api.specify_attributes, 13.3

Application Development Framework, 7.3.3

application.log, B.2.1

approve API, 16.7

attributes

events, G.5

searching, 13.3

setting for items, 11.2.1

values, 11.2.1

authenticated content

Single Sign-On and, 1.4.3, 5.1, 5.3

authentication, 7.2.7.2.1

comparison of portlet builders, 2.18

external application, 7.2.7.3.2

message, 7.2.7.7

none, 7.2.7.3.3

partner application, 7.2.7.3.1

proxy

Web Clipping and, B.4.5

server, 7.2.7.2.3

single sign-on, 7.2.7.3

authorization, 7.2.7.2.2

B

BACK_LINK, 7.2.3.3.1

base attributes

values, 11.2.1

best practices

About mode, 6.1.1.7

CSS for Shared Screen mode, 6.1.1.1.2

Edit Defaults mode, 6.1.1.3.1

Edit mode, 6.1.1.2.1

error handling PL/SQL, 8.9.1

event handling PL/SQL, 8.10.1

for Java portlets, 6.1

Help mode, 6.1.1.6

HTML for Shared Screen mode, 6.1.1.1.1

Link mode, 6.1.1.8

navigation, 6.1.2

PL/SQL procedures and functions, 8.1.2

Preview mode, 6.1.1.4

security PL/SQL, 8.7.1

browsing

Web Clipping and, 5.2.2

C

caching, 7.2.9

activation, 7.2.9.2

adding, 7.2.9.3, 7.2.9.4, 7.2.9.5

expiry-based, 2.5, 7.2.9

expiry-based PL/SQL, 8.8.4

invalidation port, 7.2.9.4.2

invalidation-based, 2.5, 7.2.9

invalidation-based PL/SQL, 8.8.5

manually invalidating the cache, 7.2.9.4.4

PL/SQL, 8.8

provider servlet for invalidation based, 7.2.9.4.1

provider.xml for invalidation based, 7.2.9.4.3

style, 2.5

system-level, 2.5

user-level, 2.5

validation-based, 2.5, 7.2.9

validation-based PL/SQL, 8.8.3

categories

applying to an item, 16.3.7.2.4

creating, 12.3

events, G.8

character sets

Web Clipping and, 5.1, 5.7

character-separated values

building a portlet based on a spreadsheet, 4.3

chart portlets

comparison, 2.11

check_in_item API, 11.2.3

check_out_item API, 11.2.3

cipher manager, 7.2.8.3.6

clear_cmef_context API, 9.4.5

clipping sections, 5.2.2

CMEF

about, 16.1

applying a category, 16.3.7.2.4

applying a perspective, 16.3.7.2.4

approving an item, 16.3.7.2.3

creating a page, 16.3.7.1.1

creating a subscriber, 16.3.1

creating an item, 16.3.7.2.1

deleting a page, 16.3.7.1.4

deleting an item, 16.3.7.2.5

dequeuing messages, 16.2.2.3

enabling CMEF events, 16.3.3

enqueuing messages, 16.2.1

external workflow example, 16.8

installing examples, 16.4

item approval, 16.3.7.2.2

item notification example, 16.6

item verification example, 16.7

listening to messages, 16.2.4

message payload, 16.3.6

portal object event logging example, 16.5

registering a subscriber, 16.2.2.1, 16.3.2

running a subscriber, 16.3.5

updating a page group ACL, 16.3.7.1.3

updating page ACL, 16.3.7.1.2

communication

HTTPS, 7.2.7.8

security, 7.2.7.2.3

connection information

OmniPortlet, 3.2.2.2

connection problems

Web Clipping, B.4.4

constructResourceURL, 6.1.2.1.4

content

adding to page, 5.2

rendering inline, 2.10

Content Management Event Framework

see CMEF

context

setting for session, 10.1

context information

accessing PL/SQL, 8.6

function calls PL/SQL, 8.6.1

obtaining using wwctx_api package, 8.6.2

cookies

Web Clipping and, 5.7

copy_folder API, 11.4.2

copy_item API, 11.4.1

CSS

guidelines for Shared Screen mode, 6.1.1.1.2

customization

implementing PL/SQL session store, 8.4.2

preference store for PL/SQL, 8.4.1

customizations

transporting, 7.2.8

customizing

Show page, 7.2.2.3

D

data

filtering, 3.2.3

data sources

filtering data, 3.2.3

using a spreadsheet, 3.2.2.3

using a Web Service, 3.2.2.6

using an existing Web page, 3.2.2.7

using SQL, 3.2.2.4

using with portlets, 3.2.1

using XML, 3.2.2.5

database providers, 2.4.3, 2.4.3

DBA Studio, 16.2.2.2

DBMS_AQADM.ADD_SUBSCRIBER procedure, 16.2.2.1

DBMS_AQADM.REMOVE_SUBSCRIBER procedure, 16.2.2.1

DBMS_AQ.DEQUEUE procedure, 16.2.2.3

CONSUMER_NAME parameter, 16.2.2.3

DEQUEUE_MODE parameter, 16.2.2.3

NAVIGATION parameter, 16.2.2.3

DBMS_AQ.LISTEN procedure, 16.2.4

debugging information

Web Clipping and, B.4.1

delete_folder API, 11.5.2

delete_ils_privilege API, 15.3.2

delete_item API, 11.5.1

deploying

properties, D.2.4

testing, D.2.3

WAR file for PDK-Java portlet, 6.5.4

deployment plans

creating automatically, D.2.2

dequeuing, 16.2.2.3

DESIGN_LINK, 7.2.3.3.1

develop in-place portlets, 2.7

develop-in-place portlets, 2.1

DeviceClass header, 8.12

E

EAR file, D.1.1

creating manually, D.2.1.4

deploying manually, D.2.2

Edit Defaults mode, 3.2.6, 6.1.1.3

Edit Defaults page, 7.2.2.2

Edit mode, 6.1.1.2

Edit page, 7.2.2.2

enable_ils_for_item API, 15.3

encryption

example, 7.2.8.3.6

for transport, 7.2.8.3.4

message, 7.2.7.2.3

enqueuing, 16.2.1

error handling

PL/SQL, 8.9

error messages

Web Clipping, B.4.2

errors

Web Clipping and, B.4.1, B.4.5

event handling

PL/SQL, 8.10

EVENT_LINK, 7.2.3.3.1

events, 7.2.3

adding to a portlet, 3.2.7

attributes, G.5

categories, G.8

configuring with portlet parameters, 4.6

enabling for CMEF, 16.3.3

generated code in provider.xml, 7.2.3.4

item types, G.6

items, G.1

page groups, G.4

page types, G.7

pages, G.2

perspectives, G.9

submitting, 7.2.3.4

tabs, G.3

templates, G.10

using with OmniPortlet, 3.3

examples

building an OmniPortlet on a spreadsheet, 4.3

building an OmniPortlet on a Web Service, 4.2, 4.7

building an OmniPortlet on an existing Web page, 4.5

building an OmniPortlet on an XML data source, 4.4

configuring portlet parameters and events, 4.6

installing for CMEF, 16.4

OmniPortlet, 4

using HTMLlayout, 4.7

execute_cache_invalidation API, 9.4.3

expiration

portlet content, 5.2.3

Expires field

Web Clipping and, 5.2.3

expiry-based caching, 2.5

export

by reference, 7.2.8.3.5

by reference example, 7.2.8.3.7

customizations, 7.2.8

encrypting for, 7.2.8.3.4

encryption example, 7.2.8.3.6

example of, 7.2.8.2

JNDI variable, 7.2.8.3.2

logging interface, 7.2.8.1

programming interface, 7.2.8.1

securing communications, 7.2.8.3.1

security, 7.2.8.3

exportData, 7.2.8.1, 7.2.8.1, 7.2.8.1

external applications

authentication, 7.2.7.3.2

Web Clipping and, 1.4.3, 5.1, 5.3

external links, 6.1.2.1.3

F

file not found, B.2.2.6

files

creating file items, 12.4

uploading, 12.4

forms

building with URL types, 7.2.3.3.3

Web Clipping and, 5.2.3, 5.4.3

Full Screen mode, 6.1.1.5

fuzzy matching

with Web Clipping, 1.4.3, 5.1

G

generator

PL/SQL, 8.2

get method

transforming for JPS portlets, B.2.2.11

get_all_items_xml API, 13.4.3

get_item_xml API, 13.4.4

get_nls_language API, 9.5.2, 14.2

grantee_list API, 15.1

guidelines

About mode, 6.1.1.7

CSS for Shared Screen mode, 6.1.1.1.2

Edit Defaults mode, 6.1.1.3.1

Edit mode, 6.1.1.2.1

error handling PL/SQL, 8.9.1

event handling PL/SQL, 8.10.1

Help mode, 6.1.1.6

HTML for Shared Screen mode, 6.1.1.1.1

Link mode, 6.1.1.8

mobile, PL/SQL, 6.1.4, 8.1.3

navigation, 6.1.2

Preview mode, 6.1.1.4

security PL/SQL, 8.7.1

H

Help mode, 6.1.1.6

HTML

guidelines for Shared Screen mode, 6.1.1.1.1

HTML layout

using with OmniPortlet, 4.7

htmlFormHiddenFields, 7.2.3.3.3

HTTP error code 407

Web Clipping and, B.4.5

httpd.conf, 7.2.7.6

HTTPS, 7.2.7.8

configuration, 7.2.7.8

I

IDs

finding, 10.3

ILS, 15.3

defining privileges, 15.3.1

enabling for item, 15.3

enabling for page, 15.3

images

in Web Clipping clip, B.4.7

resource proxy, 6.1.2.1.4

import

by reference, 7.2.8.3.5

by reference example, 7.2.8.3.7

customizations, 7.2.8

encrypting for, 7.2.8.3.4

encryption example., 7.2.8.3.6

JNDI variable, 7.2.8.3.2

logging interface, 7.2.8.1

programming interface, 7.2.8.1

securing communications, 7.2.8.3.1

security, 7.2.8.3

importData, 7.2.8.1, 7.2.8.1, 7.2.8.1

inherit_folder_privileges API, 15.3.3

inline rendering, 2.10

Web Clipping and, 1.4.3, 5.1

input parameters

Web Clipping and, 5.2.3, 5.4.3

internal links, 6.1.2.1.4

internationalization

Web Clipping and, 5.1

intraportlet links, 6.1.2.1.1

URL parameters, 7.2.3.3.1

invalidation-based caching, 2.5

ISO-8859-1 character set, 5.7

item ID

finding, 10.3.4

item level security

see ILS

item types

events, G.6

item_search API, 13.1

items

applying a category, 16.3.7.2.4

applying a perspective, 16.3.7.2.4

approval, 16.3.7.2.2

approving, 12.6, 16.3.7.2.3

associating with uploaded files, 12.4

checking in, 11.2.3

checking out, 11.2.3

copying, 11.4.1

creating, 12.4, 16.3.7.2.1

creating file items, 12.4

defining privileges, 15.3.1

deleting, 11.5.1, 16.3.7.2.5

editing, 11.2.2

enabling ILS, 15.3

events, G.1

moving, 11.3.1

new version, 11.2.4

rejecting, 12.6

searching, 13.1

searching specific attributes, 13.3

security, 15.3

setting attributes, 11.2.1

setting perspectives, 12.5

translations, 14.5

J

J2EE application server, 2.4

Java Community Process, 2.2.3

Java Portlet Specification

see JPS

Java portlets

authentication for external application, 2.18.3

caching style, 2.5.2

capturing content, 2.9.3

charting, 2.11.3

comparing to other portlet builders, 2.1

development tool, 2.6.2

event support, 2.14.1

expertise required, 2.3.3

guidelines, 6.1

multi-lingual support, 2.16.1

pagination support, 2.17.3

parameter support, 2.13.2

rendering content inline, 2.10.3

security, 2.15.2

usage suitability, 2.2.3

user interface, 2.8.3

JavaScript

Web Clipping and, 5.7

JNDI, 7.2.4

declaring variables, 7.2.4.1

deployment properties, D.2.4

for export, 7.2.8.3.2

for import, 7.2.8.3.2

retrieving variables, 7.2.4.3

setting variable values, 7.2.4.2

variable naming conventions, 7.2.4.1.2

variable types, 7.2.4.1.1

variables provided by PDK-Java, 7.2.4.3

JPS, 6.2

creating portlet, 6.3.1

deploying portlet, 6.3.3

personalizing portlets, 7.1.1

JSR-168, 2.1

L

language

items, 14.5

setting for session, 14.3

string loading PL/SQL, 8.11.2.1

string retrieval PL/SQL, 8.11.2.2

language support

see multi-lingual portlets

layout

bullet, 3.2.5.4

chart, 3.2.5.2

form, 3.2.5.5

news, 3.2.5.3

OmniPortlet, 3.2.5

tabular, 3.2.5.1

LDAP

see Oracle Internet Directory

limitations

Web Clipping and, 5.7

Link mode, 6.1.1.8

for mobile PL/SQL portlets, 8.12

links

building with URL parameters, 7.2.3.3.2

portlet, 6.1.2.1

load balancers

Web Clipping and, B.4.4

logging

application.log, B.2.1

provider levels, B.2.1

Web Clipping files, B.4.2

Web Clipping levels, B.4.1

LOGIN_LINK, 7.2.3.3.1

logon denied message

Web Clipping and, B.4.4

M

matrix, portlet technologies, 2

message payload, 16.3.6

messages

500, B.2.2.5, B.2.2.10

authentication, 7.2.7.7

dequeuing, 16.2.2.3

encryption, 7.2.7.2.3

enqueuing, 16.2.1

listening, 16.2.4

migration

preference store, 7.2.2

MIME type

setting for mobile portlets, 8.12

MLS

see multi-lingual portlets

mobile

accessing configuration data, 7.2.10.1

determining device type, 8.12

DeviceClass header for PL/SQL, 8.12

Link mode for PL/SQL, 8.12

navigation, 7.2.10.2

PL/SQL guidelines, 6.1.4, 8.1.3

portlets, PDK-Java, 7.2.10

portlets, PL/SQL, 8.12

mod_osso

Web Clipping and, 5.7

mode

Edit Defaults, 3.2.6

modes

About, 6.1.1.7

adding render, 7.2.1

Edit, 6.1.1.2

Edit Defaults, 6.1.1.3

Full Screen, 6.1.1.5

Help, 6.1.1.6

Link, 6.1.1.8

list of Show, 6.1.1

Preview, 6.1.1.4

Shared Screen, 6.1.1.1

modify_folder API, 11.1

modify_item API, 11.2.2

p_addnewversion, 11.2.4

modify_item_post_upload API, 12.4

move_category API, 11.3.3

move_folder API, 11.3.2

move_item API, 11.3.1

move_perspective API, 11.3.3

multi-lingual

PL/SQL portlets, 8.11

multi-lingual portlets

comparison, 2.16

provider.xml, 7.2.11.2.2

resource bundles, 7.2.11.2.1

updating renderer, 7.2.11.2.1

N

navigation

implement within a portlet, 7.2.3.3.4

link API, 7.2.3.3.2

with Web Clipping, 1.4.3, 5.1

within a Java portlet, 6.1.2

NLS

see multi-lingual portlets

Web Clipping and, 5.1

O

OmniPortlet, 1.4.4

adding to a page, 4.1

authentication for external application, 2.18.2

building based on a spreadsheet, 4.3

building based on an existing Web page, 4.5

building based on an XML data source, 4.4

building based on character-separated values, 4.3

bullet layout, 3.2.5.4

caching style, 2.5.1

capturing content, 2.9.2

chart layout, 3.2.5.2

charting, 2.11.2

comparing to other portlet builders, 2.1

configuring portlet parameters and events, 4.6

connection information, 3.2.2.2

definition, 3.1

development tool, 2.6.1

event support, 2.14.1

Events tab, 3.2.7

examples, 4

expertise required, 2.3.2

Filter tab, 3.2.3

filtering data, 3.2.3

form layout, 3.2.5.5

HTML layout example, 4.7

Layout tab, 3.2.5

multi-lingual support, 2.16.1

news layout, 3.2.5.3

pagination support, 2.17.2

parameter support, 2.13.1

proxy authentication, 3.2.2.1

rendering content inline, 2.10.2

security, 2.15.1

Source tab, 3.2.2

spreadsheet example, 4.3

tabular layout, 3.2.5.1

troubleshooting, B.3

Type tab, 3.2.1

usage suitability, 2.2.2

using data sources, 3.2.1

using the wizard, 3.2

View tab, 3.2.4

Web page example, 4.5

Web Service example, 4.2, 4.7

XML example, 4.4

Oracle Diagnostics and Tuning pack, 16.2.2.2

Oracle Enterprise Manager

DBA Studio, 16.2.2.2

Oracle Internet Directory, 7.2.7.9

Oracle JDeveloper

deploying JPS portlet, 6.3.3

deploying PDK-Java portlet, 6.5.4

WAR file deployment, 6.5.4

Oracle Streams AQ

and CMEF, 16.2

Oracle struts portlet, 7.3.1.3

OracleAS Metadata Repository, 9.1

OracleAS Portal

repository, 2.4.4

using data sources, 3.2.1

OracleAS Portal pages

Web Clipping and, 5.7

OracleAS Web Cache

invalidation port, 7.2.9.4.2, 7.2.9.4.3

invalidation-based caching, 2.5

P

package

implementing portlet with PL/SQL, 8.3.1

implementing provider with PL/SQL, 8.3.2

page

partial refresh, 7.2.3.3.4

page designer, definition, Preface

page groups

creating, 12.1

enabling CMEF events, 16.3.3

events, G.4

searching all, 13.1

searching in specific, 13.2

updating ACL, 16.3.7.1.3

page manager

see page designer

page metadata, 2.4.4

page parameters, 2.12

page types

events, G.7

PAGE_LINK, 7.2.3.3.1

page_search API, 13.2

pages

copying, 11.4.2

creating, 12.2, 16.3.7.1.1

creating an item, 12.4

creating file items, 12.4

deleting, 11.5.2, 16.3.7.1.4

editing, 11.1

enabling ILS, 15.3

events, G.2

moving, 11.3.2

searching, 13.2

setting perspectives, 12.5

updating ACL, 16.3.7.1.2

pagination support in portlets, comparison, 2.17

Parallel Page Engine (PPE), 2.4.4

parameters, 7.2.3

adding, 7.2.3.2

building links with URL, 7.2.3.3.2

configuring portlet parameters and events, 4.6

generated code in provider.xml, 7.2.3.2

mapping public PL/SQL, 8.5.2

passing page PL/SQL, 8.5.2

passing private PL/SQL, 8.5.1

PL/SQL, 8.5

qualified PL/SQL, 8.5.1

retrieving values PL/SQL, 8.5.3

types, 2.12

unqualified PL/SQL, 8.5.1

using with OmniPortlet, 3.3

Web Clipping and, 5.2.3, 5.4.3

parameters and events

using with OmniPortlet, 3.3

partner application, 7.2.7.3.1

PDK, 1.4.7

PDK-Java, 6.4

comparing to other portlet builders, 2.1

deploying portlet, 6.5.4

JNDI variables, 7.2.4.3

manually packaging providers, D

personalizing portlets, 7.2.2

Portlet Wizard, 6.5.1

render modes, 7.2.1

testing portlet and provider, 6.5.3

PDK-PL/SQL

comparing to other portlet builders, 2.1

pending items

approving, 12.6

rejecting, 12.6

performance

caching, 7.2.9

caching PL/SQL, 8.8

personal pages

Web Clipping and, 5.4.1

personalizing

code generated by wizard, 7.2.2.2.1

Edit and Edit Defaults pages, 7.2.2.2

JPS portlets, 7.1.1

modifying generated code, 7.2.2.2.2

PDK-Java portlets, 7.2.2

personalizing content

Web Clipping, 5.4.1, 5.4.3

perspectives

applying to an item, 16.3.7.2.4

creating, 12.3

events, G.9

setting for items, 12.5

setting for pages, 12.5

PL/SQL

accessing context information, 8.6

building portlets, 8.3

caching, 8.8

error handling, 8.9

event handling, 8.10

generator, 8.2

implementing the portlet package, 8.3.1

implementing the provider package, 8.3.2

parameters, 8.5

preference store, 8.4.1

publishing generated portlets, 8.2.3

recommended procedures and functions, 8.1.2

running the generator, 8.2.2

security, 8.7

session store, 8.4.2

starter provider sample, 8.3

XML for generator, 8.2.1

PL/SQL portlets

authentication for external application, 2.18.4

building expertise required, 2.3.5

caching style, 2.5.3

capturing content, 2.9.4

charting, 2.11.5

comparing to other portlet builders, 2.1

development tool, 2.6.3

event support, 2.14.2

mobile guidelines, 6.1.4, 8.1.3

multi-lingual support, 2.16.1

pagination support, 2.17.3

parameter support, 2.13.2

rendering content inline, 2.10.5

security, 2.15.4

usage suitability, 2.2.5

user interface, 2.8.3

portal developer, definition, Preface

portal links, 6.1.2.1.2

Portal schema

password and Web Clipping, B.4.4

Portal Tools

OmniPortlet, 3.1

portals

about, 1.1

using data sources, 3.2.1

portlet

refresh, 7.2.3.3.4

Portlet Builder

caching style, 2.5.1

charting, 2.11.4

comparing to other portlet builders, 2.1

development tool, 2.6.1

event support, 2.14.2

expertise required, 2.3.4

multi-lingual support, 2.16.2

pagination support, 2.17.4

parameter support, 2.13.1

rendering content inline, 2.10.4

security, 2.15.3

usage suitability, 2.2.4

portlet developer,definition, Preface

portlet parameters

configuring, 4.6

Portlet Wizard

generated code for personalization, 7.2.2.2.1

modifying generated code, 7.2.2.2.2

PDK-Java, 6.5.1

PortletDefintion, 7.2.8.1

PortletInstance, 7.2.8.1

PortletRenderer, 7.2.2

portlets

adding a header and footer, 3.2.4

adding events, 3.2.7

building with PL/SQL, 8.3

bullet layout, 3.2.5.4

caching, PL/SQL, 8.8

changing the layout, 3.2.5

changing view options, 3.2.4

chart layout, 3.2.5.2

context information PL/SQL, 8.6

creating a struts portlet, 7.3.2

creating JPS-compliant, 6.3.1

customization export, 7.2.8

defined, 1.2

deploying JPS compliant, 6.3.3

deploying PDK-Java compliant, 6.5.4

deployment, 2.4

development tool, 2.6

error handling PL/SQL, 8.9

event handling PL/SQL, 8.10

export of customizations, 7.2.8

features and characteristics, 2

form layout, 3.2.5.5

guidelines, Java, 6.1

guidelines, PL/SQL

best practices, 8.1

implementing navigation within, 7.2.3.3.4

Java, 6, 7

Java Standards, 2.1

links, 6.1.2.1

mobile guidelines, 6.1.4, 8.1.3

mobile, PDK-Java, 7.2.10

mobile, PL/SQL, 8.12

modes list, 6.1.1

multi-lingual, 7.2.11

multi-lingual PL/SQL, 8.11

navigation link API, 7.2.3.3.2

news layout, 3.2.5.3

not displaying, B.2.7

OmniPortlet, 1.4.4

out of the box, 1.4.1

package, PL/SQL, 8.3.1

PDK-Java, 6.5.1

personalizing JPS, 7.1.1

personalizing PDK-Java, 7.2.2

PL/SQL, 8

PL/SQL parameters, 8.5

Portlet Builder, 1.4.5

privileges, 7.2.7.4

providers, 2.4

publishing generated, 8.2.3

record, for mobile PL/SQL, 8.12

security, 7.2.7

security managers, 7.2.7.5

security PL/SQL, 8.7

tabular layout, 3.2.5.1

technologies, 2

testing PDK-Java, 6.5.3

URL types, 7.2.3.3.1

verification service for WSRP, 6.3.4

Web Clipping, 1.4.3

Web source, 1.2

preference store, 7.2.2

creating and accessing in PL/SQL, 8.4.1.2

migration utility, 7.2.2

PL/SQL, 8.4.1

PrefStoreTransporter, 7.2.8.3.7

Preview mode, 6.1.1.4

private portlet parameters, 2.12

privileges, 7.2.7.4

defining for items, 15.3.1

portlet, 7.2.7.4

provider, 7.2.7.4

retrieving, 15.1

properties

Web Clipping portlet, 5.2.3, 5.4.3

provider_record, 8.13.2

ProviderInstance, 7.2.8.1

providers

architecture, 2.4.4

database providers, 2.4.3

logging levels, B.2.1

manually packaging, D

package, PL/SQL, 8.3.2

portlet deployment, 2.4

privileges, 7.2.7.4

registering for JPS, 6.3.4

registering for PDK-Java, 6.5.5

registering programmatically, 8.13

registration, 2.4.5

runTest, E.2.2

servlet for invalidation based caching, 7.2.9.4.1

test harness, E.2

test page, E.1

provider.xml

activating invalidation based caching, 7.2.9.4.3

events, 7.2.3.4

multi-lingual, 7.2.11.2.2

parameters, 7.2.3.2

portlet resource bundles, 7.2.11.2.2

preference information, 7.2.2.4

provider resource bundles, 7.2.11.2.2

session, 7.2.6.2

updating for render modes, 7.2.1.3

provsyns.sql script, 9.3

proxy authentication

OmniPortlet, 3.2.2.1

URL-based portlets and, 5.6.5

Web Clipping and, 1.4.3, 5.1, B.4.5

proxy server setting

Web Clipping and, B.4.4

proxy, resource, 6.1.2.1.4

public portlet parameters, 2.12

Q

queues

registering a subscriber, 16.2.2.1

WWSBR_EVENT_ERR_Q, 16.2.3

WWSBR_EVENT_Q, 16.2.1

R

refresh

partial page, 7.2.3.3.4

registering

JPS portlet, 6.3.4

PDK-Java portlet, 6.5.5

providers programmatically, 8.13

troubleshooting, B.2.2.3

reject API, 16.7

remove_group_acl API, 15.2.2

remove_user_acl API, 15.2.2

render modes, 7.2.1

updating provider.xml for, 7.2.1.3

resource

proxy, 6.1.2.1.4

resource bundles, 7.2.11.2.1

updating renderer, 7.2.11.2.1

resource links, 6.1.2.1.4

reverse proxy

Web Clipping and, B.4.4

runTest, E.2.2

S

searching

all page groups, 13.1

items, 13.1

limiting results returned, 13.2

pages, 13.2

specific attributes, 13.3

specific page groups, 13.2

sections

Web Clipping and, 5.2.2

secure content repository views, 9.2.1, F.2

security, 7.2.7

authentication, 7.2.7.2.1

authorization, 7.2.7.2.2

coding in PL/SQL, 8.7.2

communication, 7.2.7.2.3

features, 7.2.7.2

for export, 7.2.8.3

for import, 7.2.8.3

for transport communications, 7.2.8.3.1

guidelines for PL/SQL, 8.7.1

implementing PL/SQL, 8.7

managers, 7.2.7.5

message authentication, 7.2.7.7

server, 7.2.7.6

services

default, D.2.1.2

identfier, D.1.2

name, D.1.2

session

context, 10.1

language, 14.3

session information, 7.2.6

checking for valid session, 7.2.6.2

enabling in provider.xml, 7.2.6.2

storage implementation, 7.2.6.2

session store

creating and accessing in PL/SQL, 8.4.2

PL/SQL, 8.4.2

set_attribute API, 11.2.1

set_context API, 10.1

set_group_acl API, 15.2.1

set_nls_language API, 14.3

set_user_acl API, 15.2.1

Shared Screen mode, 6.1.1.1

Show modes

list, 6.1.1

Show page, 7.2.2.3

Simple Object Access Protocol (SOAP), 2.4

Single Sign-On

Web Clipping and, 1.4.3, 5.1, 5.3

single sign-on, 7.2.7.3

comparison of portlet builders, 2.18

external application, 2.18, 7.2.7.3.2

partner application, 7.2.7.3.1

SOAP, 2.4

specify_attributes API, 13.3

spreadsheet

building a portlet based on a spreadsheet, 4.3

building an OmniPortlet, 4.3

using as a data source, 3.2.2.3

SQL

using as a data source, 3.2.2.4

SSL, 7.2.7.8

configuration, 7.2.7.8

starter provider sample, 8.3

status

checking for Web Clipping, B.4.3

strings

loading language PL/SQL, 8.11.2.1

retrieving language PL/SQL, 8.11.2.2

struts

building portlet in JDeveloper, 7.3

creating a portlet, 7.3.2

OracleAS Portal integration, 7.3.1.3

overview, 7.3.1.2

subscribers

creating, 16.3.1

external workflow example, 16.8.3.4

item notification example, 16.6

item verification example, 16.7

portal object event logging example, 16.5

registering, 16.2.2.1, 16.3.2

running, 16.3.5

supported APIs, 9.2

supported views, 9.2.1, F.2

T

tabs

events, G.3

technologies, portlets, 2

templates

events, G.10

terminology, 9.2.2

test harness, E.2

test page

provider, E.1

Web Clipping, B.4.3

testing

portlet and provider for PDK-Java, 6.5.3

Time Out field

Web Clipping and, 5.2.3

timeout

troubleshooting, B.2.2.9

translations

creating, 14.5

transport

by reference, 7.2.8.3.5

by reference example, 7.2.8.3.7

customizations, 7.2.8

encrypting for, 7.2.8.3.4

encryption example, 7.2.8.3.6

example, 7.2.8.2

JNDI variable, 7.2.8.3.2

logging interface, 7.2.8.1

programming interface, 7.2.8.1

securing communications, 7.2.8.3.1

security, 7.2.8.3

troubleshooting

adding a portlet to your page, B.2.2.8

adding a portlet to your provider, B.2.2.4

installation and deployment, B.2.2

java portlets, B.2

OmniPortlet, B.3

portlet does not compile, B.2.3

portlets not displaying, B.2.7

registration, B.2.2.3

template.ear, B.2.2.2

timeout, B.2.2.9

Web Clipping, B.4

XML parser, B.2.2.7

U

undelete_item API, 11.5.1

upload_blob API, 12.4

URL rewriting field

Web Clipping and, 5.2.3

URL-based portlets

migrating to Web Clipping, 1.4.3, 5.1

URLs

in forms, 7.2.3.3.3

specifying for Web Clipping, 5.2.2, 5.3

types for portlets, 7.2.3.3.1

UrlUtils.constructLink, 7.2.3.3.2

users

page designer, Preface

portal developer, Preface

portlet developer, Preface

UTF-8 character sets

Web Clipping and, 5.1

V

validation-based caching, 2.5

variables

declaring JNDI, 7.2.4.1

JNDI, 7.2.4

JNDI naming conventions, 7.2.4.1.2

JNDI provided by PDK-Java, 7.2.4.3

JNDI types, 7.2.4.1.1

retrieving JNDI variables, 7.2.4.3

setting values for JNDI, 7.2.4.2

verification service

WSRP, 6.3.4

versions

new, 11.2.4

View mode, 6.1.1.1

views

providing access to, 9.3

supported, 9.2.1, F.2

WWSBR_ALL_CATEGORIES, F.2.1

WWSBR_ALL_CONTENT_AREAS, F.2.2

WWSBR_ALL_FOLDER_REGIONS, F.2.3

WWSBR_ALL_FOLDERS, F.2.4

WWSBR_ALL_ITEMS, 10.3.4, F.2.5

WWSBR_ALL_NAVIGATION_BARS, F.2.6

WWSBR_ALL_PERSPECTIVES, F.2.7

WWSBR_ALL_STYLES, F.2.8

WWSBR_APPROVER, F.2.9

WWSBR_ATTRIBUTES, F.2.10

WWSBR_CONTENT_AREA_APPROVAL, F.2.11

WWSBR_CONTENT_AREA_ITEM_TYPES, F.2.12

WWSBR_FOLDER_ATTRIBUTES, F.2.13

WWSBR_FOLDER_PERSPECTIVES, F.2.14

WWSBR_FOLDER_TYPE_ATTRIBUTES, F.2.15

WWSBR_FOLDER_TYPES, F.2.16

WWSBR_ITEM_APPROVAL, F.2.17

WWSBR_ITEM_ATTRIBUTES, F.2.18

WWSBR_ITEM_PERSPECTIVES, F.2.19

WWSBR_ITEM_TYPE_ATTRIBUTES, F.2.20

WWSBR_ITEM_TYPES, F.2.21

WWSBR_SUBSCRIPTION, F.2.22

WWSBR_USER_FOLDERS, F.2.23

WWSBR_USER_PAGES, F.2.24

W

WAR file, D.1.1

creating manually, D.2.1.3

for PDK-Java, 6.5.4

Web Clipping

authentication for external application, 2.18.1

caching style, 2.5.1

capturing content, 2.9.1

charting, 2.11.1

comparing to other portlet builders, 2.1

connection problems, B.4.4

development tool, 2.6.1

event support, 2.14.1

expertise required, 2.3.1

firewalls and, B.4.4

forms and, 5.2.3, 5.4.3

limitations, 5.7

load balancers and, B.4.4

logging levels and, B.4.1

multi-lingual support, 2.16.1

parameter support, 2.13.1

personal pages and, 5.4.1

proxy authentication, B.4.5

proxy servers and, B.4.4

rendering content inline, 2.10.1

reverse proxy and, B.4.4

searching, 5.4.2

security, 2.15.1

test page, B.4.3

troubleshooting, B.4

usage suitability, 2.2.1

user interface, 2.8.1

Web Clipping portlet, 1.4.3, 5

adding, 5.2

properties, 5.2.3, 5.4.3

Web Clipping provider, 5

Web Clipping Studio

using, 5.2.2

Web content

adding to page, 5.2

browsing for, 5.2.2

expiration, 5.2.3

reuse, 1.4.3, 5.1

specifying, 5.2.2, 5.3

timeout value, 5.2.3

Web page

building a portlet based on an existing Web page, 4.5

building an OmniPortlet, 4.5

using as a data source, 3.2.2.7

Web providers, 2.4.1

Web Service

building an OmniPortlet, 4.2, 4.7

using as a data source, 3.2.2.6

Web Services for Remote Portlets

see WSRP

Web source, 1.2

web.xml file

for Web Clipping, B.4.4

WSRP, 2.1, 2.4, 6.2

verification service, 6.3.4

WSRP producers, 2.4.2

wwctx_api

context information, 8.6.2

WWCTX_API package

get_nls_language API, 9.5.2, 14.2

set_context API, 10.1

set_nls_language API, 14.3

WWPRO_API_INVALIDATION package

execute_cache_invalidation API, 9.4.3

wwpro_api_provider_registry.register_provider, 8.13.3

WWSBR_ALL_CATEGORIES view, F.2.1

WWSBR_ALL_CONTENT_AREAS view, F.2.2

WWSBR_ALL_FOLDER_REGIONS view, F.2.3

WWSBR_ALL_FOLDERS view, F.2.4

WWSBR_ALL_ITEMS view, 10.3.4, F.2.5

WWSBR_ALL_NAVIGATION_BARS view, F.2.6

WWSBR_ALL_PERSPECTIVES view, F.2.7

WWSBR_ALL_STYLES view, F.2.8

WWSBR_API package

add_category API, 12.3

add_content_area API, 12.1

add_folder API, 12.2

add_item API, 12.4, 12.4

add_item_ils_privileges API, 15.3.1

add_item_post_upload API, 12.4

add_perspective API, 12.3

approve API, 16.7

check_in_item API, 11.2.3

check_out_item API, 11.2.3

clear_cmef_context API, 9.4.5

copy_folder API, 11.4.2

copy_item API, 11.4.1

delete_folder API, 11.5.2

delete_ils_privilege API, 15.3.2

delete_item API, 11.5.1

enable_ils_for_item API, 15.3

inherit_folder_privileges API, 15.3.3

modify_folder API, 11.1

modify_item API, 11.2.2

p_addnewversion, 11.2.4

modify_item_post_upload API, 12.4

move_category API, 11.3.3

move_folder API, 11.3.2

move_item API, 11.3.1

move_perspective API, 11.3.3

reject API, 16.7

set_attribute API, 11.2.1

undelete_item API, 11.5.1

upload_blob API, 12.4

WWSBR_APPROVER view, F.2.9

WWSBR_ATTRIBUTES view, F.2.10

WWSBR_CONTENT_AREA_APPROVAL view, F.2.11

WWSBR_CONTENT_AREA_ITEM_TYPES view, F.2.12

WWSBR_EVENT_ERR_Q queue, 16.2.3

WWSBR_EVENT_Q queue

dequeuing, 16.2.2.3

enqueuing, 16.2.1

WWSBR_FOLDER_ATTRIBUTES view, F.2.13

WWSBR_FOLDER_PERSPECTIVES view, F.2.14

WWSBR_FOLDER_TYPE_ATTRIBUTES view, F.2.15

WWSBR_FOLDER_TYPES view, F.2.16

WWSBR_ITEM_APPROVAL view, F.2.17

WWSBR_ITEM_ATTRIBUTES view, F.2.18

WWSBR_ITEM_PERSPECTIVES view, F.2.19

WWSBR_ITEM_TYPE_ATTRIBUTES view, F.2.20

WWSBR_ITEM_TYPES view, F.2.21

WWSBR_SUBSCRIPTION view, F.2.22

WWSBR_USER_FOLDERS view, F.2.23

WWSBR_USER_PAGES view, F.2.24

WWSEC_API package

grantee_list API, 15.1

remove_group_acl API, 15.2.2

remove_user_acl API, 15.2.2

set_group_acl API, 15.2.1

set_user_acl API, 15.2.1

WWSRC_API package

get_all_items_xml API, 13.4.3

get_item_xml API, 13.4.4

item_search API, 13.1

page_search API, 13.2

specify_attributes API, 13.3

X

XML

building a portlet based on XML, 4.4

building an OmniPortlet, 4.4

for PL/SQL Generator, 8.2.1

troubleshooting, B.2.2.7

using as a data source, 3.2.2.5

XML provider definition

see provider.xml

Copyright © 2004, 2011, Oracle and/or its affiliates. All rights reserved.