Oracle® Fusion Middleware Release Notes 11g Release 1 (11.1.1) for Linux x86 Part Number E10133-33 |
|
|
PDF · Mobi · ePub |
This chapter describes issues associated with Fusion Middleware Control. It includes the following topics:
Note:
This chapter contains issues you might encounter while using Fusion Middleware Control to manage any of the Oracle Fusion Middleware products.
Be sure to review the product-specific release note chapters elsewhere in this document for any additional issues specific to the products you are using.
This section describes general issue and workarounds. It includes the following topic:
Section 5.1.3, "Verifying the DISPLAY Variable to Correct Problems Displaying Graphics"
Section 5.1.4, "Incomplete Information Available on the MDS Configuration Page"
Section 5.1.6, "Table Display Problems When Using Some Language Variants"
Section 5.1.8, "Additional Fusion Middleware Control Release Notes"
Section 5.1.9, "Problem with Performance Charts After Moving a Chart Region"
Section 5.1.13, "Error Message on Deleting the Shared Folder After Scale-Out"
For security purposes, your sessions with the Fusion Middleware Control will time out after a predefined period of inactivity, and you will be asked to log in to the console again. In most cases, you are returned to the page you had displayed before the session timed out.
However, in some circumstances, such as when you are using the Fusion Middleware Control deployment wizards, you will not be returned the same location in the product after you log in. In those cases, you will have to navigate to the specific Fusion Middleware Control page you were using before the session timed out.
In Fusion Middleware Control, you can view the Oracle TopLink management pages by selecting TopLink Sessions from the Application Deployment menu.
However, if you receive an error message when you select this command, you can remedy the problem by adding one or both of the following MBean system properties, as follows
On Windows operating systems:
rem set JAVA_OPTIONS=%JAVA_OPTIONS% -Declipselink.register.dev.mbean=true rem set JAVA_OPTIONS=%JAVA_OPTIONS% -Declipselink.register.run.mbean=true
On UNIX operating systems:
JAVA_OPTIONS="${JAVA_OPTIONS} -Declipselink.register.dev.mbean=true" JAVA_OPTIONS="${JAVA_OPTIONS} -Declipselink.register.run.mbean=true"
For more information, see the following URL on the Eclipse WIKI Web site:
http://wiki.eclipse.org/Integrating_EclipseLink_with_an_Application_Server_(ELUG)#How_to_Integrate_JMX
The graphics subsystem for the Fusion Middleware Control generates some of its graphics on demand, and if the DISPLAY environment variable is set, Fusion Middleware Control tries to open the specified DISPLAY environment.
If Fusion Middleware Control fails to start due to graphics errors, check to see whether the DISPLAY environment variable is set to a proper DISPLAY environment.
If the DISPLAY environment variable is set incorrectly, unset the DISPLAY environment variable. Then restart Fusion Middleware Control.
After deploying a Oracle SOA Suite application that requires Oracle Metadata Services (MDS), in some rare circumstances, you may find that the MDS configuration page for the application does not contain complete information about the MDS repository.
To address this problem, use the Metadata Repositories page to register the repository again. For more information, see "Create and Register an MDS Repository" in the Fusion Middleware Control online help.
To start, stop, or restart Oracle Web Cache from Fusion Middleware Control, from the Web Cache menu, you can choose Control, and then Start Up, Shut Down, or Restart.
If you select Shut Down, and then Start Up on a configuration page, Fusion Middleware Control may return exception errors. If these errors occur in your environment, perform the operations from Web Cache Home page.
When you use Fusion Middleware Control in some non-English language environments, some of the tables on the component home pages display incorrectly. For example, some rows of the table appear to be merged and without content.
These issues can be safely ignored, since no data on the pages is hidden. The table cells that appear incorrectly do not contain performance data or other information.
If you configure Microsoft Internet Explorer 7 so it always displays pop-up windows in a new browser tab, then you may experience problems using Fusion Middleware Control. For example, in some cases, Enteprise Manager content displays in a new tab as expected, but Fusion Middleware Control stops responding to mouse clicks. The only way to continue working is to close the tab.
To avoid this problem, use the Internet Options dialog box in Internet Explorer to disable the option for displaying pop-up windows in a new tab.
Refer to Chapter 4, "Oracle Fusion Middleware Administration" for additional Fusion Middleware Control release notes.
Additional Fusion Middleware Control release notes are also included in the component chapters of the Release Notes.
Oracle Enterprise Manager Fusion Middleware Control provides performance charts on many of the component home pages. For example, it provides charts that display the current response and load metrics, as well as the CPU and memory usage.
If you move one of these charts to a new location on the home page, then sometimes the Table View link (which provides a tabular view of the data) does not work properly and the chart might stop refreshing automatically.
To fix this problem, click the refresh icon at the top, right corner of the page to refresh the page.
Some of the newer Intel-based computers support the SSE4.2 instruction set. If you are using the 160_18
version of the Java Development Kit (JDK) on one of these computers, then you might see some display issues in the Oracle Enterprise Manager Fusion Middleware Control.
This is related to the following issue on the Sun Developer Network (SDN):
http://bugs.sun.com/view_bug.do?bug_id=6875866
In particular, when using Fusion Middleware Control, you might experience some font size and alignment issues, and an error similar to the following appears in the server log file:
Servlet failed with Exception java.lang.StringIndexOutOfBoundsException: String index out of range
To remedy this problem:
Locate and open the setDomainEnv
configuration file in your Oracle WebLogic Server domain home.
For example:
DOMAIN_HOME/bin/setDomainEnv.sh
Add the following to the JAVA_OPTIONS
entry in the setDomainEnv
file and save your changes:
-XX:-UseSSE42Intrinsics
For example:
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES}
-Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag}
-Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag} -XX:-UseSSE42Intrinsics"
Locate the following directory in your Oracle WebLogic Server domain home:
DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/jmb4hf/public/adf/styles/cache/
Delete the style sheets (.css) files from the directory.
Restart the Oracle WebLogic Server domain.
Clear the cache in your Web browser.
To use the Apple Safari browser to display Fusion Middleware Control, you must have the Adobe Flash browser plugin installed.
If you experience problems displaying graphics or other Fusion Middleware Control elements, download and install a newer version of the plugin from the Adobe Web site.
After you install the Oracle Fusion Middleware 11g Release 1 (11.1.1.4.0) patch set, you might experience problems when accessing the Fusion Middleware Control pages used to manage the Oracle Identity Management components.
Specifically, an error similar to the following appears in the Administration Server log files:
[ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000In^zrbUF8DQ6ubU4UH1D1qXF00000s,0] [APP: em] [[ oracle.adf.controller.ControllerException: ADFC-00025: The ADF controller has not been successfully initalized.
If you experience this problem, restart the Administration Server. After the restart, you should be able to log in and access the Fusion Middleware Control pages.
If Oracle Essbase is configured, then the Shared Folder Path field is displayed in the Essbase Agents region on the Failover page of the Availability tab for the Business Intelligence node in Fusion Middleware Control.
You use the Shared Folder Path field when setting up a highly available Essbase deployment. The field specifies a shared location for Essbase configuration files, security files, and all applications and corresponding databases.
If you remove an existing value in the Shared Folder Path field and attempt to apply the change without specifying a replacement value, then the following error message is displayed:
OBI_SYSMAN_1261, "You must not delete the shared folder after a previous scaleout"
To continue, either specify a valid path to the shared location in the Shared Folder Path field, or discard the change.
This section describes documentation errata. It includes the following topics:
Section 5.2.1, "Search Unavailable for Some Embedded Administrator's Guides"
Section 5.2.2, "Patching Section in the Fusion Middleware Control Online Help is Not Supported"
Search is unavailable for the following embedded administrator's guides in the Fusion Middleware Control help system:
Oracle Fusion Middleware Administrator's Guide for Oracle Identity Federation
Oracle Fusion Middleware System Administrator's Guide for Content Server for installations with Oracle Enterprise Content Management Suite
The Fusion Middleware Control online help system includes the contents of the Oracle Fusion Middleware System Administrator's Guide for Oracle Business Intelligence Enterprise Edition. In the Fusion Middleware Control online help, this guide includes Section 17.11, which describes patching the Oracle BI Presentation Catalog. This functionality is not supported in Release 11.1.1.5. The section is not included in the version of the guide that ships with Oracle BI EE or that is posted on the Oracle Technology Network.