Oracle® Enterprise Manager Ops Center

Quick Start Guide

12c Release 1 (12.1.1.0.0)

E25147-03

July 2012

This guide describes how to perform a simple software deployment.

Introduction

Oracle Enterprise Manager Ops Center is an enterprise-level datacenter automation software tool. This guide walks you through how to quickly install and configure the software for a basic monitoring setup. After you configure the software, you can add assets, view the operating system analytics, monitor assets, and view alerts and incidents.

This configuration is not practical for larger datacenters, but it does get you started with the software. You can update or change the configuration at any time to add remote Proxy Controllers for a larger scale deployment and to enable other features, such as OS provisioning and updates.

The following topics are covered in this guide:

Get Ready

Install and Configure the Software

Add Assets

View Analytics

Monitor Assets

Where to Go From Here

For an overview of the software and features, see the Oracle Enterprise Manager Ops Center Concepts Guide.

Get Ready

Many configurations are possible, but we have simplified it for a quick start. This guide describes how to install and configure an Enterprise Controller with a colocated Proxy Controller that uses a local database.

You will configure the Enterprise Controller to run in disconnected mode. You can change the connection mode to connect the Enterprise Controller to the Internet after you configure the software. The Internet connection, either directly or through an HTTP proxy, provides the most efficient and direct method of obtaining operating system and software updates. You can also view service requests and configure automated service requests when you are in connected mode.

A lightweight utility, called the OCDoctor, verifies that your system meets the requirements to successfully install and run the software.

What You Will Need

You need the following for a simple installation and configuration:

A system to run the software:

SPARC or x86 platform that is running a supported Oracle Solaris or Linux OS, such as Oracle Solaris 11, Oracle Solaris 10 9/10, or Oracle Linux 5.5.

87 GB of disk space.

6 GB Swap Space.

6 GB Memory.

Root access.

One or more systems to monitor:

Root access to a SPARC or x86 platform that is running a recent operating system version, such as Oracle Solaris 10 or 11, or Oracle Linux 5.5.

A newer Oracle Sun server (at least 2006).

Enable the SSH services on the OS and know the port number (the default is 22).

OCDoctor utility to test for requirements.

See Run the OCDoctor to Identify Prerequisites for where to download the file.

The Oracle Enterprise Manager Ops Center 12c software.

See Get the Software for where to download the software bundle.

An e-mail address for a My Oracle Support (MOS) user account. This is needed for the service request, automated service request, provisioning, and update features.

(Optional) An Internet connection.

Run the OCDoctor to Identify Prerequisites

The OCDoctor quickly identifies potential issues before you download and install the software. In some cases, it provides a fix. New versions of the OCDoctor are released regularly. Be sure to get the latest version.

To check the computer compatibility before downloading the software:

Go to http://java.net/projects/oc-doctor/downloads and download the OCDoctor-LATEST.zip file to the /var/tmp/OC directory on the system.

Unzip the file and run the utility with the --ec-prereq option.

The utility checks for conditions and returns an OK or Warning.

For example:

# ./OCDoctor.sh --ec-prereq
Ops Center Doctor version 4.0.5 (Aug 11 2011 [Build 402])
========== Checking Enterprise Controller Requirements ... ====================
OK: Size of Main Memory: 8192 MB
OK: Size of swap space: 8197 MB
OK: Found enough disk space on /var/opt/sun/xvm (114G)
OK: Installed Solaris Package Cluster: SUNWCall
OK: Solaris 10 found
OK: Solaris 10 u9 found
<Output omitted>

If you receive any warnings, fix them before installing the software.

For example, a warning appears when you use NIS and you have a groupip 60 in your NIS group. To temporarily bypass, comment out the NIS entries during the installation.

passwd: files # nisgroup: files # nis

Get the Software

Platform-specific software bundles are located on the Oracle Technology Network.

Make a /var/tmp/OC directory on your system.

Go to the Oracle Technology Network http://www.oracle.com/technetwork/indexes/downloads/index.html. Scroll down to find the link to the Oracle Enterprise Manager Ops Center Downloads site. Read and accept the license at the top of the page.

Download the Enterprise Controller for your OS platform and save the bundle on the directory you created in step 1.

Description of download.png follows
Description of the illustration download.png

Unzip the bundle.

Install and Configure the Software

The software is easy to install, just launch the script. Once installed, open the application in a browser and answer the configuration questions about how you want to run the software, then you are ready to start adding assets to monitor.

You are prompted to provide a My Oracle Support (MOS) account during setup. The MOS account is required to fully enable all capabilities. The account is not required for installation or basic monitoring. You can provide a MOS account in the UI after the installation is complete to enable other features.

Install the Software

Go to the /var/tmp/OC/xvmoc_full_bundle directory and run the install script.

# ./install

The Oracle Configuration Manager installation starts. Enter a MOS e-mail address to associate with Oracle Enterprise Manager Ops Center.

Description of start_install.jpg follows
Description of the illustration start_install.jpg

The installer takes about 15 minutes to run and updates as the steps are completed, as shown below. When all items are completed, you are prompted to configure the software.

Ops Center Enterprise Controller Installer
(version 12.1.0.0 on SunOS)

1. Check for installation prerequisites. [Completed]
2. Configure file systems. [Completed]
3. Install prerequisite packages. [Not Completed]
4. Install Agent components. [Not Completed]
5. Create Deployable Proxy Bundles. [Not Completed]
6. Install application packages. [Not Completed]
7. Run postinstall tasks. [Not Completed]
8. Install Expect. [Not Completed]
9. Install IPMI tool. [Not Completed]
10. Set database credentials. [Not Completed]
11. Install and configure Oracle Database. [Not Completed]
12. Install Service container components. [Not Completed]
13. Install Core Channel components. [Not Completed]
14. Install Proxy Core components. [Not Completed]
..........................
19. Initialize and start services. [Not Completed]
(2 of 19 Completed)

Executing current step: Install prerequisite packages...

Configure the Software

A simple deployment configures the Proxy Controller on the Enterprise Controller system. This configuration does not set up the image and update libraries or DHCP services that are required for provisioning and updating your operating systems.

In this procedure, the Enterprise Controller is configured to run in disconnected mode, which means that it is not connected to the Internet.

To log into the software, go to https://<system name>:9443.

Enter the system's root user name and password. Select Ops Center local as the default database source. Click Log In.

Description of login.png follows
Description of the illustration login.png

If the Prerequisite Checklist appears, your system might not meet the minimum requirements.

Description of prereq_checklist.png follows
Description of the illustration prereq_checklist.png

If the checklist indicates system changes are required, cancel the configuration and make the suggested changes.

To continue, click Next.

Click Next to accept the following default values on the Enterprise Controller Setup page:

EC Name – The default is the system that the Enterprise Controller is installed on. This name appears in the UI masthead. You can change the name for better identification.

Administrative User – Set the currently logged in User as the Administrative User. This is the only user that the software recognizes until you add other users. The Administrative User has the Enterprise Controller Admin and All Assets Admin roles.

Colocated Proxy – Installs the Proxy Controller on the same system as the Enterprise Controller.

Description of ec_setup.png follows
Description of the illustration ec_setup.png

The Proxy Controller configuration job is launched. Close the window when the configuration is complete.

Verify that the Proxy Controller you installed and configured is online, then click Next.

Description of pc_status.png follows
Description of the illustration pc_status.png

On the Connection Mode page, select the Disconnected mode option, then click Next.

Description of disconnect_mode_setup.png follows
Description of the illustration disconnect_mode_setup.png

On the Create Software Libraries page, accept the default locations for the libraries, then click Next to configure the Update libraries.

Description of config_sw_lib_setup-a.png follows
Description of the illustration config_sw_lib_setup-a.png

The Software Libraries store firmware images, ISO images, and flash archives. The Linux and Oracle Solaris 8-10 Software Update Library and the Oracle Solaris 11 Software Update Library store the OS images. The Oracle Solaris 11 Software Update Library is only created when you install the Enterprise Controller on an Oracle Solaris 11 operating system.

The Linux/Oracle Solaris 8-10 Software Bundle page appears, click Next to skip this step.

To perform OS provisioning, you must configure DHCP on the Proxy Controller. Click Next to skip this step.

Description of dhcp_config.png follows
Description of the illustration dhcp_config.png

Click Finish.

Description of summary_install_config.png follows
Description of the illustration summary_install_config.png

If you are going to manage Oracle Solaris 11 operating systems, upgrade the Oracle Solaris 11 Agent Controller. See the Oracle Enterprise Manager Ops Center Administration Guide for how to upgrade the Agent Controller from the UI.

Congratulations! You completed the installation and configuration. You can now add your systems to the UI and begin monitoring them.

Add Assets

Discovery profiles define the assets that you want to begin managing. The profiles are based on the type of asset, such as Oracle Solaris operating systems and server hardware with ILOM service processors.

You need at least two Discovery profiles, one for server hardware and another for operating systems. You can add the IP ranges and discovery credentials when you create the profile or when you use the profile to add assets. In this procedure, the profile does not contain IP addresses or credentials. The details to add specific assets are supplied when you apply the plan to the targets.

Create at least two Discovery profiles, the first to define the hardware and the other to define the operating system. Generally, the discovery order does not matter, but a good practice is to discover the chassis first, then blades, and finally the operating system.

Create Discovery Profiles

In Plan Management, scroll down to Profiles and Policies, then click Discovery.

Description of nav_discover.png follows
Description of the illustration nav_discover.png

Click Create Profile in the Actions pane.

Enter a name for the discovery profile. Select the asset type, either the Server Hardware or the Operating Systems. Expand the asset type to further define the type. This example is for a system with an ILOM service processor. Click Next.

Description of disc_ilom_1.png follows
Description of the illustration disc_ilom_1.png

On the Tags page, click Next to skip adding tags in this procedure.

On the IP Ranges page, click Next to skip this step. This information is added later.

On the Discovery Credentials page, click Next to skip this step. This information is added later.

Click Finish to create the profile. The new profile appears in the center pane.

Repeat this procedure until you have at least one service processor-specific hardware discovery profile and one OS-specific operating system discovery profile.

Add Hardware

Use the hardware discovery profile that you created earlier to add the hardware to the UI.

Open Assets in the Navigation pane, then click Add Assets in the Actions pane.

Description of all_assets.png follows
Description of the illustration all_assets.png

In Add Assets, select the first option to add and manage various types of assets. Click Next.

Description of add_assets.png follows
Description of the illustration add_assets.png

Select the Discovery Profile that you created earlier. When you select the profile, the page expands to include fields for the host name or IP address and discovery credentials.

Enter the name or IP address of the service processor. You can use a comma delimited list to add more names or IP addresses.

Select Automatic from the Network list.

The credentials that you created earlier appear at the bottom of the page. To change them, click New and complete the Create Credentials page.

Click Add Now.

Description of add_assets_now.png follows
Description of the illustration add_assets_now.png

A job is launched to discover and manage the asset. You can use the same profile to discover other systems with ILOM service processors.

Add Operating System

Use the OS discovery profile that you created earlier to add the operating system to the UI.

Open Assets in the Navigation pane, then click Add Assets in the Actions pane.

Description of all_assets.png follows
Description of the illustration all_assets.png

Select the first option to add and manage various types of assets. Click Next.

Description of add_assets.png follows
Description of the illustration add_assets.png

Select the OS discovery profile that you created. Click Next.

Click Next to skip adding tags in this procedure.

Do not specify IP addresses now. Click Next

Define the discovery credentials and management option.

To use previously defined credentials, click Select and choose from the list.

To create a new set of credentials, click New to launch a pop-up wizard.

Description of discovercreds.png follows
Description of the illustration discovercreds.png

For new credentials, enter a name and description that identifies the credential. Enter the root user name and password for the system, then click OK to return to the Discovery Credentials page.

Description of create_credentials.png follows
Description of the illustration create_credentials.png

In the Management section of the Discovery Credentials page, select Deploy Agent Controller to install the Agent Controller on the asset.

Description of discovercreds.png follows
Description of the illustration discovercreds.png

A job is launched to discover and manage the asset. When the job completes successfully, expand Servers in Assets to see the hardware and associated OS.

View Analytics

The Analytics feature provides details on operating system and zone performance. The charts, reports, and utilization data provide details of an individual operating system. You can use the information to improve performance and diagnose issues.

The most robust data is available when the operating system is agent managed. The Summary provides an overview of CPU, memory, network, and I/O utilization, as shown in Figure 1. Next to the graph is a table of the top five processes, or consumers, for each type of utilization. You can drill down to view greater details about one of the top five processes, or you can click the Processes tab to view details or to kill a process.

Figure 1 OS Analytics Summary Page

Description of Figure 1 follows
Description of "Figure 1 OS Analytics Summary Page"

Services

The Services tab provides a view of Oracle Solaris 10 and 11 Service Management Facility (SMF) services. The Oracle Solaris SMF feature defines the relationships between applications, or services. SMF is a method of managing services by providing a framework for startup scripts, init run levels, and configuration files. Each service is identified by a Fault Managed Resource Identifier (FMRI).

The Services tab contains SMF service instances, state, dependencies, and severity information. You can drill down to see specific service details, including the configuration, dependencies, and the processes that are in the service contract.

You can perform the following actions in the Services tab:

View a list of services currently installed and their states

View a list of dependencies and dependents for FMRI

View the relationship between services and processes

View details about why a service is not available

Obtain logs for debugging

Clear faults for FMRI

Invoke the disable, enable, and restart actions on FMRI

Read configuration files

Services information is available for agent managed and agentlessly managed Oracle Solaris 10 and 11 operating systems, including global and non-global zones.

Thresholds

The Thresholds tab contains information about all of the monitored attributes for the selected operating system. Monitored attributes include per-instance attributes, such as File System Usage for each file-system on the asset. Figure 2 shows a partial list of the monitored attributes available for display.

Figure 2 CPU Usage

Description of Figure 2 follows
Description of "Figure 2 CPU Usage"

Charts for the historical data of those attributes show the alert monitor threshold levels, when configured, for that attribute. Figure 3 shows the chart for the System Load Average - 15 minutes. The time frame selected is Live. Beneath the chart are the severity levels for this monitored attribute (SystemLoad.average15MinutePerCpuCore), the operator, and the threshold values. Instead of editing the thresholds in the Monitoring tab, you can change the values on this page. You can either add values in the New Value column or click Suggest Thresholds to auto populate the fields with suggested values. Click Apply Thresholds to change the existing thresholds.

Note:

When the threshold monitor is modified, the asset is removed from the default monitoring profile and a custom profile created.

Figure 3 Thresholds

Description of Figure 3 follows
Description of "Figure 3 Thresholds"

Metrics

The Metrics tab provides you with specific details about various operating system elements, such as the percentage of memory used, and view graphs. When monitoring thresholds are enabled for an element, you can reset the thresholds.

Click the Metrics tab to see OS-specific components. The following list are the types of component details available for an agent-managed Oracle Solaris OS:

Load

File Systems

Networks

Users

Buffer Activity

Disk Usage

Paging Activity

Message Activity

Tables Status

TTY Activity

Kernel Memory

DNLC

IPC Message Queue

IPC Shared Memory

IPC Semaphore Usage

CPU Detail

File Access

Disk Errors

Memory Utilization

Expand a component to view the available elements. Click an element to view the details. In Figure 4, the Load component is expanded and the elements, such as percentage of memory used, CPU utilization percentage, CPU core count, and system uptime options are available in the Load list. Memory Used % is selected and the details and a graph are visible.

Figure 4 Component Navigation

Description of Figure 4 follows
Description of "Figure 4 Component Navigation"

The type of resource determines the available details. Figure 5 is an example of the details and graph for the Memory Used % element. This example shows a system in trouble. The Details shows the last known value memory usage at 95.59111 percent and the established monitoring parameters. A warning incident is generated at 80 percent and a critical incident is generated when the used memory reaches 95 percent.

View the bar graph to see how the memory usage has trended over the selected time period. The yellow and red horizontal lines indicate the warning and critical thresholds.

Figure 5 Memory Used % Details and Graph

Description of Figure 5 follows
Description of "Figure 5 Memory Used % Details and Graph"

The wrench icon appears above the graph. For this graph, click the icon to change the graph style to line, bar, or area. You can change the definition of the X axis from 1 day to 1 hour, 5 days, 3 weeks, 6 weeks, or 6 months. The export icon enables you to export the graph to file in CSV or XML format.

You have the opportunity to reset the threshold values for the monitoring rule from this page, or to view recommended threshold values based on past performance. When you click the Set Thresholds button, you can modify the monitoring rule for this operating system. Doing this creates a custom set of monitoring rules for the asset. See Monitoring Rules and Policies for more information about editing individual monitoring rule parameters and creating a custom monitoring policy.

Monitor Assets

The software has a set of default monitoring rules for many types of assets. When you discover and manage an asset, such as an operating system, the software begins monitoring the status based on the default rules.

How Monitoring Works

Many assets have a default monitoring profile. Different types of monitoring profiles are available, depending on the asset type. Some profiles contain individual monitoring rules, thresholds and alert levels. These alert levels are editable for Critical, Warning, and Informational incident notification. Some profiles, such as system-defined rules, are not editable but you can disable them. You can customize the alerts and monitoring profiles for each asset or group of assets.

To view or edit the default monitoring rules for an asset, click a managed asset from the Assets tree in the Navigation pane, then click the Monitoring tab in the center pane.

Description of monitoring.png follows
Description of the illustration monitoring.png

The icons at the top of the center pane enable you to add, edit, enable, disable, or delete rules.

When an asset first meets or exceeds a monitoring threshold or state, an alert and an incident are generated. Subsequent alerts are aggregated under the existing incident.

How to Create an Alert and Incident

An easy way to generate an alert and incident is to shutdown a monitored system. The shutdown generates a critical status alert. The System Down incident appears in the Message Center.

How to View and Assign Incidents

You can see the incidents that are unassigned, assigned to you, and assigned to others the Message Center.

Description of message_center_1.png follows
Description of the illustration message_center_1.png

Details appear in the center pane. The details include a bar chart, a list of incidents by category and severity, and a detailed list of the individual incidents.

Description of message_center.png follows
Description of the illustration message_center.png

You can also see incidents and the associated alerts for each asset in the Incidents tab.

Where to Go From Here

The initial setup uses a disconnected mode without registering your MOS account and without creating the software libraries. You can edit the configuration at any time to change the connection mode, create the DHCP and software libraries, and register a My Oracle Support (MOS) account. You must register your MOS account and create the software libraries before you can use the Service Request, Automated Service Request, provisioning, and update features.

What You'll Need When the Enterprise Controller is on Oracle Solaris 11

When you have the Enterprise Controller installed on an Oracle Solaris 11, you might need the following:

If you use an HTTP proxy to connect to the Internet, you must set the http_proxy and https_proxy environment variables to specify the proxy server to use.

The location of the key and certificate files for Oracle Solaris 11. If you do not have key and certificate files, go to https://pkg-register.oracle.com/ and log in using your MOS credentials to download them.

Related Articles and Resources

The documentation is available at http://www.oracle.com/pls/topic/lookup?ctx=oc121.

See the platform-specific Installation Guide for a more complex installation.

See the Oracle Enterprise Manager Ops Center Concepts Guide for an introduction to the product and an overview of the features. See the Oracle Enterprise Manager Ops Center Feature Reference Guide for more information about the features.

See the Oracle Enterprise Manager Ops Center Administration Guide for details about connection modes and editing authentications to add a MOS user account.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Oracle Enterprise Manager Ops Center Quick Start Guide, 12c Release 1 (12.1.1.0.0)

E25147-03

Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

This image is a screen capture of the Create Credentials wizard. The name and description fields are completed. The user login name, password, and confirm password fields are completed. The Privileged Role and Role Password fields are empty. The SSH Port is completed with the number 22.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Enterprise Controller Setup page. It shows the default settings for the EC Name, the Administrative User, and the Proxy Controllers, as described in the step.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Create Software Libraries page showing the library locations.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Add Assets link in the Actions pane. The Assets drawer is expanded in the Navigation pane, All Assets is selected. The cursor is on the Add Assets action in the Actions pane.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Discovery Credentials page. The Discovery section has the name of the credential file that was created in the previous step.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Configure DHCP for OS Provisioning page. The DHCP shows that DHCP is disabled for the Proxy Controller.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the log in page. The system name appears. The User name field is completed with root. The password field is completed and Ops Center local appears in the Source field.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

The image is a screen capture that shows the Display drop-down list that is on the Thresholds page. The list shows CPU Usage %, Memory Usage %, Swap Usage %, System Load Average - 1 Minute, System Load Average -15 Minutes. System Load Average - 15 Minutes, CIFS Usage, CPU Context Switches, CPU Interrupts, CPU System Call Rate, CPU System Time, and CPU User Time.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Connection Mode page that shows the Disconnected Mode selected.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This graphic shows the upper portion of the Navigation pane. The cursor is hovering over the first section, the Message Center. The Message Center is expanded to show the following options, each with an icon at the beginning: Unassigned Incidents, My Incidents, Incidents Assigned to Others, Open Service Requests, My Service Requests, Service Requests Opened by Others, and Notifications.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Add Assets page. The first radio button is selected to add.and manage various types of assets is selected.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture that shows Memory Used % Details in text and graph formats. The following Details are shown for this parameter: Last Known Value is 95.59111, Threshold Active and Threshold Enabled are both Yes. The Critical Value is 95.00, the Warning Value is 80.0, the Info Value is not available. The Memory Free % graph has two icons in the upper right corner. The graph is a line graph with Percentage on the Y axis on the left and Time on the X axis on the bottom.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

The image is a screen capture of the Component Navigation for an Oracle Solaris operating system. The Load component is expanded and five parameters, as described in the text, appear under Load. Memory Used % is selected.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Proxy Controller Status page that shows the hostname, the status as ONLINE, the IP/Subnet Mask, and a link to check the connectivity.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture that shows the Summary page with the configuration selections chosen, including the EC Name, the Administrative User, the Proxy Controllers, the Host Name, IP/Subnet Mask, Status, Connection Mode, and libraries.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture that shows the following tabs: Dashboard, Summary, Connectivity, Incidents, Service Requests, Monitoring, and Jobs. The Monitoring tab as two subtabs: Alert Monitoring Rules and Service Dependencies. The Alert Monitoring Rules table indicates that there are 20 rules. Two sections of the table appear: Boolean Control Monitoring Rules (2), Enumerated Control Monitoring Rules (1). The table has four columns: Alert Monitoring Rules, Alert Limits, Enabled ?, and Active ?. The first rule is highlighted. The rule is OS Running, the Alert Limits cell has a blue icon with a white i in the center and is defined as Info: false. The Enabled and Active cells each have a Yes in the cell. The second rule is Powered On and has the same information in the remaining three cells. The third rule is an Enumerated Control Monitoring Rule. The Rule is Server Port Status, the Alert Limit has a yellow triangle with white exclamation point icon and is defined as a Warning: Disabled, disabled, Down, down, DOWN. The rule is enabled and active.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This graphic shows the Unassigned Incidents section. The left side of the graphic contains a table showing the Incidents Composition. The right side of the graphic contains a table for Unassigned Incidents. The table column titles are: Severity, Total, Chassis, Servers, OSes, M-Series, Storage, Switches, and Others. The first column contains three icons. The first row is for Critical incidents, as indicated by an icon with a red circle and a white x. The second row is for Warning Incidents, as indicated by an icon with a yellow triangle and a white exclamation point. The third row is for Informational Incidents, as indicated by a blue circle with a white i. Numbers in the table indicate the number of unassigned incidents in which categories and severity levels.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Analytics section. There are two tabs: Analytics and Zones. The Analytics tab is selected. The Analytics tab has the following subtabs: Summary, Processes, Services, Thresholds, History, Metrics, and Charts. The Summary page is selected. The four utilization charts appear, along with the corresponding table with the top five processes, for each type of utilization.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

The image is a screen capture that shows the System Load Average - 5 Minutes chart that is on the Thresholds page. The chart shows Queue Length on the Y axis and Time on the X axis. Below that is a table that shows the Severity levels for the monitored attribute, the Operator, the Current Value, and the New Value. Below that are three buttons: Clear, Suggest Thresholds, and Apply Thresholds.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Plan Management section of the Navigation pane. Profiles and Policies is expanded in this section and the cursor is on Discovery.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This graphic shows a list of the files in the xmoc_full_bundle file. The list contains. install, Linux_i686, SunOS_i386, xvmoc_update_bundle, license, ocasmp, and SunOS_ sparc. The install command is entered. When the script starts, the following message appears: Proceeding with Oracle Configuration Manager installation and configuration. A notice advises users to provide an e-mail address to be informed of security issues, and to install and initiate the Oracle Configuration Manager. The prompt is on Email address/User Name.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Identify Profile page. The Name and Description fields are completed. Server Hardware is expanded in the Asset Type and ILOM Service Processor is selected.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Discovery Profile page. The ipgs-sp-discovery profile is selected. The Hostnames/IP Addresses field is completed, the Network chosen in Automatic, and the SSH and IPMI credentials defined in the profile appear. There are three buttons in the Discovery section: New, Select, and Clear. The bottom of the page has three buttons: Add Now, Advanced, and Cancel.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the Prerequisite Checklist. The image shows a warning level severity issue, indicated by a yellow triangle with an exclamation point in the center. The Check is for Disk Space, the Comment is that 87G is recommended for the root filesystem, but only 43G is available.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

This image is a screen capture of the download page. The options are for Solaris Operating System 10 (SPARC), for Solaris Operating System 10 (x86), and for Red Hat Enterprise Linux 5.0 - 5.5 and Oracle Linux 5.3, 3.3 x86. Each platform has a link for the Enterprise Controller and for Proxy Controllers.

Oracle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Legal Notices

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2012, Oracle and/or its affiliates. All rights reserved.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Alpha and Beta Draft Documentation Notice

If this document is in prerelease status:

This documentation is in prerelease status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.