| Oracle® Transparent Gateway for DRDA Installation and User’s Guide 10g Release 1 (10.1) for UNIX Part No. B12009-01 |
|
 |
 |
| Oracle® Transparent Gateway for DRDA Installation and User’s Guide 10g Release 1 (10.1) for UNIX Part No. B12009-01 |
|
|
|
The table below is a worksheet that lists all of the parameter names and the reasons that you will need them for configuring the Gateway and the Communications Interfaces (SNA and TCP/IP). Use the worksheet to gather the specific information that you need before you begin the configuration process.
Table E-1 List of Parameters Needed to Configure the Gateway
| Reason | Name of Parameter Needed | Your Specific Parameters Here |
|---|---|---|
| For: Gateway’s Oracle Home |
ORACLE_HOME |
___________________________________________ |
| For: Gateway’s System ID |
ORACLE_SID |
___________________________________________ |
| For: Primary Service Definition |
SNA Network Name |
___________________________________________ |
| For: Primary Service Definition |
Control Point Name |
___________________________________________ |
| For: Connection Properties Address |
Remote Network Address |
___________________________________________ |
| For: Connection Properties Address |
Remote SAP Address |
___________________________________________ |
| For: System Identification: Local Node Name and Remote Node Name |
For Each: Network Name |
___________________________________________ |
| For: System Identification: Local Node Name and Remote Node Name |
Control Point Name |
___________________________________________ |
| For: System Identification: Local Node Name and Remote Node Name |
Local Node ID |
___________________________________________ |
| For: System Identification: Local Node Name and Remote Node Name |
Remote Node ID |
___________________________________________ |
| For: Creating a Local LU Definition: |
LU Alias |
___________________________________________ |
| For: Creating a Local LU Definition: |
LU Name |
___________________________________________ |
| For: General APPC Mode Definition |
Mode Name |
___________________________________________ |
| For: APPC Mode Limits |
Parallel Session Limit |
___________________________________________ |
| For: APPC Mode Limits | Minimum Contention Winner Limit |
___________________________________________ |
| For: APPC Mode Limits | Partner Min Contention Winner Limit |
___________________________________________ |
| For: APPC Mode Limits |
Automatic Activation Limit |
___________________________________________ |
| For: APPC Mode Characteristics |
Pacing Send Count |
___________________________________________ |
| For: APPC Mode Characteristics |
Pacing Receive Count |
___________________________________________ |
| For: APPC Mode Characteristics |
Max Send RU Size |
___________________________________________ |
| For: Remote LU Definition, General Properties |
Appropriate Connection name |
___________________________________________ |
| For: Remote LU Definition, General Properties |
LU ALias |
___________________________________________ |
| For: Remote LU Definition, General Properties |
Network Name |
___________________________________________ |
| For: Remote LU Definition, General Properties |
Uninterpreted Network Name |
___________________________________________ |
| For: Remote LU Properties Options |
Any Security Options needed |
___________________________________________ |
| For: Remote collection ID |
DRDA_PACKAGE_COLLID |
___________________________________________ |
| For: Remote package name |
DRDA_PACKAGE_NAME |
___________________________________________ |
| For: Creating CPI-C Symbolic Destination Names (Side Information Profiles), general information |
Appropriate Name for each Side Information Profile |
___________________________________________ |
| For: Creating CPI-C Symbolic Destination Names (Side Information Profiles), general information |
Appropriate Mode |
___________________________________________ |
| For: Partner Information in CPI-C Name Properties |
TP Name |
___________________________________________ |
| For: Partner Information in CPI-C Name Properties |
Partner LU Name Alias |
___________________________________________ |
| For: Configuring TCP/IP |
Local Hostname, Domain Name |
___________________________________________ |
| For: Configuring TCP/IP |
IP Address |
___________________________________________ |
| For: Configuring TCP/IP |
Network Mask |
___________________________________________ |
| For: Configuring TCP/IP |
Name Server IP Address |
___________________________________________ |
| For: Configuring TCP/IP | Destination Hostname or IP Address |
___________________________________________ |
| For: Configuring TCP/IP |
Destination Service Port Number |
___________________________________________ |
| For: Recovery user ID |
DRDA_RECOVERY_USERID |
___________________________________________ |
| For: Recovery Password |
DRDA_RECOVERY_PASSWORD |
___________________________________________ |
| For: Remote Database Name |
DRDA_REMOTE_DB_NAME |
___________________________________________ |
| For: Connection Parameter |
DRDA_CONNECT_PARM |
___________________________________________ |
| For: Owner ID of DRDA package |
DRDA_PACKAGE_OWNER |
___________________________________________ |
| For: DB Name used with Oracle Database server |
HS_DB_NAME |
___________________________________________ |
| For: DB Domain used with Oracle Database server |
HS_DB_DOMAIN |
___________________________________________ |
|
Note: The user ID that is used to bind or rebind the DRDA package must have the appropriate privileges on the remote database as described in Chapter 5, " Configuring the DRDA Server". Your database administrator will need to provide these privileges. |
