263 UTL_SMTP

The UTL_SMTP package is designed for sending electronic mails (e-mails) over Simple Mail Transfer Protocol (SMTP) as specified by RFC821.

This chapter contains the following topics:

Using UTL_SMTP

Overview

The UTL_SMTP protocol consists of a set of commands for an e-mail client to dispatch e-mails to an SMTP server. The UTL_SMTP package provides interfaces to the SMTP commands. For many of the commands, the package provides both a procedural and a functional interface. The functional form returns the reply from the server for processing by the client. The procedural form checks the reply and raises an exception if the reply indicates a transient (400-range reply code) or permanent error (500-range reply code). Otherwise, it discards the reply.

Note that the original SMTP protocol communicates using 7-bit ASCII. Using UTL_SMTP, all text data (in other words, those in VARCHAR2) are converted to US7ASCII before it is sent to the server. Some implementations of SMTP servers that support SMTP extension 8BITMIME [RFC1652] support full 8-bit communication between client and server. The body of the DATA command can be transferred in full 8 bits, but the rest of the SMTP command and response must be in 7 bits. When the target SMTP server supports 8BITMIME extension, users of multibyte databases may convert their non-US7ASCII, multibyte VARCHAR2 data to RAW and use the WRITE_RAW_DATA subprogram to send multibyte data using 8-bit MIME encoding.

UTL_SMTP provides for SMTP communication as specified in RFC821, but does not provide an API to format the content of the message according to RFC 822 (for example, setting the subject of an electronic mail). You must format the message appropriately. In addition, UTL_SMTP does not have the functionality to implement an SMTP server for an e-mail clients to send e-mails using SMTP.

Security Model

This package is an invoker's rights package. The invoking user must have the connect privilege granted in the access control list assigned to the remote network host to which the user must connect.

Constants

The UTL_SMTP package uses the constants shown in Table 263-1, "UTL_SMTP Constants".

Table 263-1 UTL_SMTP Constants

Name Type Value Description

ALL_SCHEMES

VARCHAR2(256)

'CRAM-MD5 PLAIN LOGIN'

List of all authentication schemes UTL_SMTP supports, in order of their relative security strength. The subset of the schemes in ALL_SCHEMES (namely, PLAIN and LOGIN) in which cleartext passwords are sent over SMTP must be used only in SMTP connections that are secured by Secure Socket Layer / Transport Layer Security (SSL/TLS).

NON_CLEARTEXT_PASSWORD_SCHEMES

VARCHAR2(256)

'CRAM-MD5'

List of authentication schemes that UTL_SMTP supports and in which no cleartext passwords are sent over SMTP. They can be used in SMTP connections that are not secured by SSL/TLS. Note that these schemes may still be weak when used in an insecure SMTP connection.


Types

CONNECTION Record Type

This is a PL/SQL record type used to represent an SMTP connection.

Syntax

TYPE connection IS RECORD (
    host              VARCHAR2(255),
    port              PLS_INTEGER,
    tx_timeout        PLS_INTEGER, 
    private_tcp_con   utl_tcp.connection,
    private_state     PLS_INTEGER);

Fields

Table 263-2 CONNECTION Record Type Fields

Field Description

host

Name of the remote host when connection is established. NULL when no connection is established.

port

Port number of the remote SMTP server connected. NULL when no connection is established.

tx_timeout

Time in seconds that the UTL_SMTP package waits before timing out in a read or write operation in this connection. In read operations, this package times out if no data is available for reading immediately. In write operations, this package times out if the output buffer is full and no data is to be sent into the network without being blocked. 0 indicates not to wait at all. NULL indicates to wait forever.

private_tcp_con

Private, for implementation use only. You should not modify this field.

private_state

Private, for implementation use only. You should not modify this field.


Usage Notes

The read-only fields in a connection record are used to return information about the SMTP connection after the connection is successfully made with the OPEN_CONNECTION Functions. Changing the values of these fields has no effect on the connection. The fields private_tcp_con and private_state for implementation use only. You should not modify these fields.

REPLY, REPLIES Record Types

These are PL/SQL record types used to represent an SMTP reply line. Each SMTP reply line consists of a reply code followed by a text message. While a single reply line is expected for most SMTP commands, some SMTP commands expect multiple reply lines. For those situations, a PL/SQL table of reply records is used to represent multiple reply lines.

Syntax

TYPE reply IS RECORD (
  code    PLS_INTEGER,
  text    VARCHAR2(508));

TYPE replies IS TABLE OF reply INDEX BY BINARY_INTEGER; 

Fields

Table 263-3 REPLY, REPLIES Record Type Fields

Field Description

code

3-digit reply code

text

Text message of the reply


Reply Codes

The following is a list of the SMTP reply codes.

Table 263-4 SMTP Reply Codes

Reply Code Meaning

211

System status, or system help reply

214

Help message [Information on how to use the receiver or the meaning of a particular non-standard command; this reply is useful only to the human user]

220

<domain> Service ready

221

<domain> Service closing transmission channel

250

Requested mail action okay, completed

251

User not local; forwards to <forward-path>

252

OK, pending messages for node <node> started. Cannot VRFY user (for example, info is not local), but takes message for this user and attempts delivery.

253

OK, <messages> pending messages for node <node> started

354

Start mail input; end with <CRLF.CRLF>

355

Octet-offset is the transaction offset

421

<domain> Service not available, closing transmission channel (This can be a reply to any command if the service knows it must shut down.)

450

Requested mail action not taken: mailbox unavailable [for example, mailbox busy]

451

Requested action terminated: local error in processing

452

Requested action not taken: insufficient system storage

453

You have no mail.

454

TLS not available due to temporary reason. Encryption required for requested authentication mechanism.

458

Unable to queue messages for node <node>

459

Node <node> not allowed: reason

500

Syntax error, command unrecognized (This may include errors such as command line too long.)

501

Syntax error in parameters or arguments

502

Command not implemented

503

Bad sequence of commands

504

Command parameter not implemented

521

<Machine> does not accept mail.

530

Must issue a STARTTLS command first. Encryption required for requested authentication mechanism.

534

Authentication mechanism is too weak.

538

Encryption required for requested authentication mechanism.

550

Requested action not taken: mailbox unavailable [for, mailbox not found, no access]

551

User not local; please try <forward-path>

552

Requested mail action terminated: exceeded storage allocation

553

Requested action not taken: mailbox name not allowed [for example, mailbox syntax incorrect]

554

Transaction failed


Operational Notes

SMTP connection is initiated by a call to OPEN_CONNECTION Functions which returns a SMTP connection. After a connection is established, the following calls are required to send a mail:

HELO Function and Procedure - identify the domain of the sender

MAIL Function and Procedure- start a mail, specify the sender

RCPT Function - specify the recipient

OPEN_DATA Function and Procedure- start the mail body

WRITE_RAW_DATA Procedure - write the mail body (multiple calls allowed)

CLOSE_DATA Function and Procedure - close the mail body and send the mail

The SMTP connection is closed by calling QUIT Function and Procedure.

Exceptions

The table lists the exceptions that can be raised by the interface of the UTL_SMTP package. The network error is transferred to a reply code of 421- service not available.

Table 263-5 UTL_SMTP Exceptions



INVALID_OPERATION

Raised when an invalid operation is made. In other words, calling API other than the WRITE_DATA Procedure, the WRITE_RAW_DATA Procedure or the CLOSE_DATA Function and Procedure after the OPEN_DATA Function and Procedure is called, or calling WRITE_DATA, WRITE_RAW_DATA or CLOSE_DATA without first calling OPEN_DATA.

TRANSIENT_ERROR

Raised when receiving a reply code in 400 range

PERMANENT_ERROR

Raised when receiving a reply code in 500 range


Rules and Limits

No limitation or range-checking is imposed by the API. However, you must be aware of the following size limitations on various elements of SMTP. Sending data that exceed these limits may result in errors returned by the server.

Table 263-6 SMTP Size Limitation

Element Size Limitation

user

Maximum total length of a user name is 64 characters

domain

Maximum total length of a domain name or number is 64 characters

path

Maximum total length of a reverse-path or forward-path is 256 characters (including the punctuation and element separators)

command line

Maximum total length of a command line including the command word and the <CRLF> is 512 characters

reply line

Maximum total length of a reply line including the reply code and the <CRLF> is 512 characters

text line

Maximum total length of a text line including the <CRLF> is 1000 characters (but not counting the leading dot duplicated for transparency)

recipients buffer

Maximum total number of recipients that must be buffered is 100 recipients


Examples

The following example illustrates how UTL_SMTP is used by an application to send e-mail. The application connects to an SMTP server at port 25 and sends a simple text message.

DECLARE
  c UTL_SMTP.CONNECTION;
 
  PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
  BEGIN
    UTL_SMTP.WRITE_DATA(c, name || ': ' || header || UTL_TCP.CRLF);
  END;
 
BEGIN
  c := UTL_SMTP.OPEN_CONNECTION('smtp-server.acme.com');
  UTL_SMTP.HELO(c, 'foo.com');
  UTL_SMTP.MAIL(c, 'sender@foo.com');
  UTL_SMTP.RCPT(c, 'recipient@foo.com');
  UTL_SMTP.OPEN_DATA(c);
  send_header('From',    '"Sender" <sender@foo.com>');
  send_header('To',      '"Recipient" <recipient@foo.com>');
  send_header('Subject', 'Hello');
  UTL_SMTP.WRITE_DATA(c, UTL_TCP.CRLF || 'Hello, world!');
  UTL_SMTP.CLOSE_DATA(c);
  UTL_SMTP.QUIT(c);
EXCEPTION
  WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
    BEGIN
      UTL_SMTP.QUIT(c);
    EXCEPTION
      WHEN UTL_SMTP.TRANSIENT_ERROR OR UTL_SMTP.PERMANENT_ERROR THEN
        NULL; -- When the SMTP server is down or unavailable, we don't have
              -- a connection to the server. The QUIT call raises an
              -- exception that we can ignore.
    END;
    raise_application_error(-20000,
      'Failed to send mail due to the following error: ' || sqlerrm);
END;

Summary of UTL_SMTP Subprograms

Table 263-7 UTL_SMTP Package Subprograms

Subprogram Description

AUTH Function and Procedure

Sends the AUTH command to authenticate to the SMTP server

CLOSE_CONNECTION Procedure

Closes the SMTP connection, causing the current SMTP operation to terminate

CLOSE_DATA Function and Procedure

Closes the data session

COMMAND Function and Procedure

Performs a generic SMTP command

COMMAND_REPLIES Function

Performs a generic SMTP command and retrieves multiple reply lines

DATA Function and Procedure

Sends the e-mail body

EHLO Function and Procedure

Performs the initial handshake with SMTP server using the EHLO command

HELO Function and Procedure

Performs the initial handshake with SMTP server using the HELO command

HELP Function

Sends HELP command

MAIL Function and Procedure

Initiates an e-mail transaction with the server, the destination is a mailbox

NOOP Function and Procedure

NULL command

OPEN_CONNECTION Functions

Opens a connection to an SMTP server

OPEN_DATA Function and Procedure

Sends the DATA command

QUIT Function and Procedure

Terminates an SMTP session and disconnects from the server

RCPT Function

Specifies the recipient of an e-mail message

RSET Function and Procedure

Terminates the current e-mail transaction

STARTTLS Function and Procedure

Sends STARTTLS command to secure the SMTP connection using SSL/TLS

VRFY Function

Verifies the validity of a destination e-mail address

WRITE_DATA Procedure

Writes a portion of the e-mail message

WRITE_RAW_DATA Procedure

Writes a portion of the e-mail message with RAW data


AUTH Function and Procedure

This subprogram sends the AUTH command to authenticate to the SMTP server. The UTL_SMTP package goes through the user's choices of authentication schemes, skips any that is not supported by the SMTP server and uses the first supported. To determine the schemes the SMTP server supports from its EHLO reply, the user must call the EHLO Function and Procedure. Otherwise, UTL_SMTP uses the first scheme in the list.

Syntax

UTL_SMTP.AUTH (
   c          IN OUT NOCOPY connection,
   username   IN            VARCHAR2,
   password   IN            VARCHAR2,
   schemes    IN            VARCHAR2 DEFAULT NON_CLEARTEXT_PASSWORD_SCHEMES)
 RETURN reply;

UTL_SMTP.AUTH (
   c          IN OUT NOCOPY connection,
   username   IN            VARCHAR2,
   password   IN            VARCHAR2,
   schemes    IN            VARCHAR2 DEFAULT NON_CLEARTEXT_PASSWORD_SCHEMES);

Parameters

Table 263-8 AUTH Function and Procedure Parameters

Parameter Description

c

SMTP connection

username

Username

password

Password

schemes

Space-separated list of authentication schemes UTL_SMTP is allowed to use in the preferred order. See the ALL_SCHEMES and NON_CLEARTEXT_PASSWORD_SCHEMES constants for suggestions.


Return Values

Table 263-9 AUTH Function and Procedure Function Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

  • Currently only PLAIN, LOGIN and CRAM-MD5 authentication schemes are supported by UTL_SMTP.

  • Since the SMTP server may change the authentication schemes it supports after the SMTP connection is secured by SSL/TLS after the STARTTLS command (for example, adding PLAIN and LOGIN), the caller must call the EHLO Function and Procedure again for UTL_SMTP to update the list after the STARTTLS Function and Procedure is called.

Examples

DECLARE
  c utl_smtp.connection;
BEGIN
  c := utl_smtp.open_connection(
      host => 'smtp.example.com',
      port => 25,
      wallet_path => 'file:/oracle/wallets/smtp_wallet',
      wallet_password => 'password',
      secure_connection_before_smtp => FALSE);
  UTL_SMTP.STARTTLS(c);
  UTL_SMTP.AUTH(
      c => c,
      username => 'scott',
      password => 'password'
      schemes  => utl_smtp.all_schemes);
END;

CLOSE_CONNECTION Procedure

This procedure closes the SMTP connection, causing the current SMTP operation to terminate. Use this procedure only to cancel an e-mail in the middle of the data session. To end the SMTP connection properly, use the QUIT Function and Procedure.

Syntax

UTL_SMTP.CLOSE_CONNECTION (
   c     IN OUT NOCOPY connection);

Parameters

Table 263-10 CLOSE_CONNECTION Procedure Parameters

Parameter Description

c

SMTP connection


CLOSE_DATA Function and Procedure

This subprogram ends the e-mail message by sending the sequence <CR><LF>.<CR><LF> (a single period at the beginning of a line).

Syntax

UTL_SMTP.CLOSE_DATA (
   c     IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.CLOSE_DATA (
   c     IN OUT NOCOPY connection);

Parameters

Table 263-11 CLOSE_DATA Function and Procedure Parameters

Parameter Description

c

SMTP connection


Return Values

Table 263-12 CLOSE_DATA Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

The calls to OPEN_DATA, WRITE_DATA, WRITE_RAW_DATA and CLOSE_DATA must be made in the right order. A program calls OPEN_DATA to send the DATA command to the SMTP server. After that, it can call WRITE_DATA or WRITE_RAW_DATA repeatedly to send the actual data. The data is terminated by calling CLOSE_DATA. After OPEN_DATA is called, the only subprograms that can be called are WRITE_DATA, WRITE_RAW_DATA, or CLOSE_DATA. A call to other subprograms results in an INVALID_OPERATION exception being raised.

CLOSE_DATA must be called only after OPEN_CONNECTION, HELO or EHLO, MAIL, and RCPT have been called. The connection to the SMTP server must be open and a mail transaction must be active when this routine is called.

Note that there is no function form of WRITE_DATA because the SMTP server does not respond until the data-terminator is sent during the call to CLOSE_DATA.

COMMAND Function and Procedure

This subprogram performs a generic SMTP command.

Syntax

UTL_SMTP.COMMAND (
   c     IN OUT NOCOPY    connection,
   cmd   IN               VARCHAR2,
   arg   IN               VARCHAR2 DEFAULT NULL)
RETURN reply;

UTL_SMTP.COMMAND (
   c     IN OUT NOCOPY    connection,
   cmd   IN               VARCHAR2,
   arg   IN               VARCHAR2 DEFAULT NULL);

Parameters

Table 263-13 COMMAND Function and Procedure Parameters

Parameter Description

c

SMTP connection

cmd

SMTP command to send to the server

arg

Optional argument to the SMTP argument. A space is inserted between cmd and arg.


Return Values

Table 263-14 COMMAND Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

This function is used to invoke generic SMTP commands. Use COMMAND if only a single reply line is expected. Use COMMAND_REPLIES if multiple reply lines are expected.

For COMMAND, if multiple reply lines are returned from the SMTP server, it returns the last reply line only.

COMMAND_REPLIES Function

This function performs a generic SMTP command and retrieves multiple reply lines.

Syntax

UTL_SMTP.COMMAND_REPLIES (
   c     IN OUT NOCOPY    connection,
   cmd   IN               VARCHAR2,
   arg   IN               VARCHAR2 DEFAULT NULL)
RETURN replies;

Parameters

Table 263-15 COMMAND_REPLIES Function Parameters

Parameter Description

c

SMTP connection

cmd

SMTP command to send to the server

arg

Optional argument to the SMTP argument. A space is inserted between cmd and arg.


Return Values

Table 263-16 COMMAND_REPLIES Function Return Values

Return Value Description

replies

Reply of the command (see REPLY, REPLIES Record Types)


Usage Notes

This function is used to invoke generic SMTP commands. Use COMMAND if only a single reply line is expected. Use COMMAND_REPLIES if multiple reply lines are expected.

For COMMAND, if multiple reply lines are returned from the SMTP server, it returns the last reply line only.

DATA Function and Procedure

This subprogram specifies the body of an e-mail message.

Syntax

UTL_SMTP.DATA (
   c     IN OUT NOCOPY connection
   body  IN  VARCHAR2 CHARACTER SET ANY_CS) 
RETURN reply;

UTL_SMTP.DATA (
   c     IN OUT NOCOPY connection
   body  IN VARCHAR2 CHARACTER SET ANY_CS);

Parameters

Table 263-17 DATA Function and Procedure Parameters

Parameter Description

c

SMTP Connection

body

Text of the message to be sent, including headers, in [RFC822] format


Return Values

Table 263-18 DATA Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

The application must ensure that the contents of the body parameter conform to the MIME(RFC822) specification. The DATA routine terminates the message with a <CR><LF>.<CR><LF> sequence (a single period at the beginning of a line), as required by RFC821. It also translates any sequence of <CR><LF>.<CR><LF> (single period) in body to <CR><LF>..<CR><LF> (double period). This conversion provides the transparency as described in Section 4.5.2 of RFC821.

The DATA subprogram must be called only after OPEN_CONNECTION, HELO or EHLO, MAIL and RCPT have been called. The connection to the SMTP server must be open, and a mail transaction must be active when this routine is called.

The expected response from the server is a message beginning with status code 250. The 354 response received from the initial DATA command is not returned to the caller.

EHLO Function and Procedure

This subprogram performs the initial handshake with SMTP server using the EHLO command.

Syntax

UTL_SMTP.EHLO (
   c       IN OUT NOCOPY connection, 
   domain  IN) 
RETURN replies;

UTL_SMTP.EHLO (
   c       IN OUT NOCOPY connection, 
   domain  IN);

Parameters

Table 263-19 EHLO Function and Procedure Parameters

Parameter Description

c

SMTP connection

domain

Domain name of the local (sending) host. Used for identification purposes.


Return Values

Table 263-20 EHLO Function and Procedure Return Values

Return Value Description

replies

Reply of the command (see REPLY, REPLIES Record Types).


Usage Notes

The EHLO interface is identical to HELO except that it allows the server to return more descriptive information about its configuration. [RFC1869] specifies the format of the information returned, which the PL/SQL application can retrieve using the functional form of this call. For compatibility with HELO, each line of text returned by the server begins with status code 250.

Related Functions

HELO Function and Procedure

HELO Function and Procedure

This subprogram performs the initial handshake with SMTP server using the HELO command.

Syntax

UTL_SMTP.HELO (
   c       IN OUT NOCOPY   connection, 
   domain  IN              VARCHAR2) 
RETURN reply;

UTL_SMTP.HELO (
   c       IN OUT NOCOPY   connection, 
   domain  IN              VARCHAR2);

Parameters

Table 263-21 HELO Function and Procedure Parameters

Parameter Description

c

SMTP connection

domain

Domain name of the local (sending) host. Used for identification purposes.


Return Values

Table 263-22 HELO Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

RFC 821 specifies that the client must identify itself to the server after connecting. This routine performs that identification. The connection must have been opened through a call to OPEN_CONNECTION Functions before calling this routine.

The expected response from the server is a message beginning with status code 250.

Related Functions

EHLO Function and Procedure

HELP Function

This function sends the HELP command.

Syntax

UTL_SMTP.HELP (
   c         IN OUT NOCOPY   connection, 
   command   IN              VARCHAR2 DEFAULT NULL) 
RETURN replies;

Parameters

Table 263-23 HELP Function Parameters

Parameter Description

c

SMTP connection

command

Command to get the help message


Return Values

Table 263-24 HELP Function Return Values

Return Value Description

replies

Reply of the command (see REPLY, REPLIES Record Types)


MAIL Function and Procedure

This subprogram initiate a mail transaction with the server. The destination is a mailbox.

Syntax

UTL_SMTP.MAIL (
   c           IN OUT NOCOPY   connection, 
   sender      IN              VARCHAR2, 
   parameters  IN              VARCHAR2 DEFAULT NULL) 
RETURN reply;

UTL_SMTP.MAIL (
   c           IN OUT NOCOPY   connection, 
   sender      IN              VARCHAR2, 
   parameters  IN              VARCHAR2 DEFAULT NULL);

Parameters

Table 263-25 MAIL Function and Procedure Parameters

Parameter Description

c

SMTP connection

sender

E-mail address of the user sending the message.

parameters

Additional parameters to mail command as defined in Section 6 of [RFC1869]. It must follow the format of "XXX=XXX (XXX=XXX ....)".


Return Values

Table 263-26 MAIL Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

This command does not send the message; it simply begins its preparation. It must be followed by calls to RCPT and DATA to complete the transaction. The connection to the SMTP server must be open and a HELO or EHLO command must have already been sent.

The expected response from the server is a message beginning with status code 250.

NOOP Function and Procedure

This subprogram issues the NULL command.

Syntax

UTL_SMTP.NOOP (
   c  IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.NOOP (
   c  IN OUT NOCOPY connection);

Parameter

Table 263-27 NOOP Function and Procedure Parameters

Parameter Description

c

SMTP connection


Return Values

Table 263-28 NOOP Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

  • This command has no effect except to elicit a successful reply from the server. It can be issued at any time after the connection to the server has been established with OPEN_CONNECTION. The NOOP command can be used to verify that the server is still connected and is listening properly.

  • This command replies with a single line beginning with status code 250.

OPEN_CONNECTION Functions

These functions open a connection to an SMTP server.

Syntax

UTL_SMTP.OPEN_CONNECTION (
   host                            IN  VARCHAR2, 
   port                            IN  PLS_INTEGER DEFAULT 25, 
   c                               OUT connection, 
   tx_timeout                      IN  PLS_INTEGER DEFAULT NULL,
   wallet_path                     IN  VARCHAR2 DEFAULT NULL,
   wallet_password                 IN  VARCHAR2 DEFAULT NULL, 
   secure_connection_before_smtp   IN  BOOLEAN DEFAULT FALSE)
 RETURN reply; 

UTL_SMTP.OPEN_CONNECTION (
   host                           IN  VARCHAR2, 
   port                           IN  PLS_INTEGER DEFAULT 25, 
   tx_timeout                     IN  PLS_INTEGER DEFAULT NULL,
   wallet_path                    IN  VARCHAR2 DEFAULT NULL,
   wallet_password                IN  VARCHAR2 DEFAULT NULL, 
   secure_connection_before_smtp  IN  BOOLEAN DEFAULT FALSE) 
RETURN connection; 

Parameters

Table 263-29 OPEN_CONNECTION Functions Parameters

Parameter Description

host

Name of the SMTP server host

port

Port number on which SMTP server is listening (usually 25)

c

SMTP connection

tx_timeout

Time in seconds that the UTL_SMTP package waits before timing out in a read or write operation for this connection. In read operations, this package times out if no data is available for reading immediately. In write operations, this package times out if the output buffer is full and no data is to be sent into the network without being blocked. 0 indicates not to wait at all. NULL indicates to wait forever.

wallet_path

Directory path that contains the Oracle wallet for SSL/TLS. The format is file: <directory-path>

wallet_password

Password to open the wallet. When the wallet is auto-login enabled, the password can be set to NULL.

secure_connection_before_smtp

If TRUE, a secure connection with SSL/TLS is made before SMTP communication. If FALSE, no connection is made.


Return Values

Table 263-30 OPEN_CONNECTION Functions Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

  • The expected response from the server is a message beginning with status code 220.

  • The version of OPEN_CONNECTION that returns UTL_SMTP.CONNECTION record checks the reply code returned by an SMTP server when the connection is first established. It raises an exception when the reply indicates an error. Otherwise, it discards the reply. If you want to examine the reply, invoke the version of OPEN_CONNECTION that returns REPLY.

  • tx_timeout is intended to govern both the read operations and the write operations. However, an implementation restriction prevents tx_timeout from governing write operations in the current release.

Examples

DECLARE
  c utl_smtp.connection;
BEGIN
  c := UTL_SMTP.OPEN_CONNECTION(
   host => 'smtp.example.com',
   port => 465,
   wallet_path => 'file:/oracle/wallets/smtp_wallet',
   wallet_password => 'password',
   secure_connection_before_smtp => TRUE);
END;

OPEN_DATA Function and Procedure

This subprogram sends the DATA command after which you can use WRITE_DATA and WRITE_RAW_DATA to write a portion of the e-mail message.

Syntax

UTL_SMTP.OPEN_DATA (
   c     IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.OPEN_DATA (
   c     IN OUT NOCOPY connection);

Parameters

Table 263-31 OPEN_DATA Function and Procedure Parameters

Parameter Description

c

SMTP connection

data

Portion of the text of the message to be sent, including headers, in RFC822 format.


Return Values

Table 263-32 OPEN_DATA Function and Procedure Function Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

  • The calls to OPEN_DATA, WRITE_DATA, WRITE_RAW_DATA and CLOSE_DATA must be made in the right order. A program calls OPEN_DATA to send the DATA command to the SMTP server. After that, it can call WRITE_DATA or WRITE_RAW_DATA repeatedly to send the actual data. The data is terminated by calling CLOSE_DATA. After OPEN_DATA is called, the only subprograms that can be called are WRITE_DATA, WRITE_RAW_DATA, or CLOSE_DATA. A call to other subprograms results in an INVALID_OPERATION exception being raised.

  • OPEN_DATA must be called only after OPEN_CONNECTION, HELO or EHLO, MAIL, and RCPT have been called. The connection to the SMTP server must be open and a mail transaction must be active when this routine is called.

QUIT Function and Procedure

This subprogram terminates an SMTP session and disconnects from the server.

Syntax

UTL_SMTP.QUIT (
   c  IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.QUIT (
   c  IN OUT NOCOPY connection);

Parameter

Table 263-33 QUIT Function and Procedure Parameters

Parameter Description

c

SMTP connection


Return Values

Table 263-34 QUIT Function and Procedure Function Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

The QUIT command informs the SMTP server of the client's intent to terminate the session. It then closes the connection established by OPEN_CONNECTION which must have been called before executing this command. If a mail transaction is in progress when QUIT is issued, it is canceled in the same manner as RSET.

The function form of this command returns a single line beginning with the status code 221 on successful termination. In all cases, the connection to the SMTP server is closed. The fields REMOTE_HOST and REMOTE_PORT of c are reset.

Related Functions

RSET Function and Procedure

RCPT Function

This subprogram specifies the recipient of an e-mail message.

Syntax

UTL_SMTP.RCPT (
   c           IN OUT NOCOPY     connection,
   recipient   IN                VARCHAR2,
   parameters  IN                VARCHAR2 DEFAULT NULL)
RETURN reply;

UTL_SMTP.RCPT (
   c           IN OUT NOCOPY     connection,
   recipient   IN                VARCHAR2,
   parameters  IN                VARCHAR2 DEFAULT NULL);

Table 263-35 RCPT Function and Procedure Parameters

Parameter Description

c

SMTP connection

recipient

E-mail address of the user to which the message is being sent

parameters

Additional parameters to RCPT command as defined in Section 6 of [RFC1869]. It must follow the format of "XXX=XXX (XXX=XXX ....)".


Return Values

Table 263-36 RCPT Function and Procedure Function Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

To send a message to multiple recipients, call this routine multiple times. Each invocation schedules delivery to a single e-mail address. The message transaction must have been begun by a prior call to MAIL, and the connection to the mail server must have been opened and initialized by prior calls to OPEN_CONNECTION and HELO or EHLO respectively.

The expected response from the server is a message beginning with status code 250 or 251.

RSET Function and Procedure

This subprogram terminates the current mail transaction.

Syntax

UTL_SMTP.RSET (
   c  IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.RSET (
   c  IN OUT NOCOPY connection);

Parameters

Table 263-37 RSET Function and Procedure Parameters

Parameter Description

c

SMTP connection


Return Values

Table 263-38 RSET Function and Procedure Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

  • This command allows the client to cancel an e-mail message it was in the process of composing. No mail is sent. The client can call RSET at any time after the connection to the SMTP server has been opened by means of OPEN_CONNECTION until DATA or OPEN_DATA is called. Once the e-mail data has been sent, it is too late to prevent the e-mail from being sent.

  • The server responds to RSET with a message beginning with status code 250.

Related Functions

QUIT Function and Procedure

STARTTLS Function and Procedure

This subprogram sends the STARTTLS command to secure the SMTP connection using SSL/TLS. SSL/TLS requires an Oracle wallet which must be specified when the connection was opened by the OPEN_CONNECTION Functions.

Syntax

UTL_SMTP.STARTTLS (
   c  IN OUT NOCOPY connection) 
RETURN reply;

UTL_SMTP.STARTTLS (
   c  IN OUT NOCOPY connection);

Parameters

Table 263-39 STARTTLS Function and Procedure Parameters

Parameter Description

c

SMTP connection


Return Values

Table 263-40 STARTTLS Function and Procedure Return Values

Return Value Description

reply

SMTP reply


Usage Notes

The STARTTLS command must only be issued on an unencrypted connection and when the SMTP server indicates the support of the command in the reply of the EHLO command. The wallet to be used for encryption must have been specified when the initial SMTP connection was opened by the OPEN_CONNECTION function.

Examples

DECLARE
  c utl_smtp.connection;
BEGIN
  c := utl_smtp.open_connection(
     host => 'smtp.example.com',
     port => 25,
     wallet_path => 'file:/oracle/wallets/smtp_wallet',
     wallet_password => 'password',
     secure_connection_before_smtp => FALSE);
  utl_smtp.starttls(c);
END

VRFY Function

This function verifies the validity of a destination e-mail address.

Syntax

UTL_SMTP.VRFY (
   c          IN OUT NOCOPY connection
   recipient  IN VARCHAR2) 
RETURN reply;

Parameters

Table 263-41 VRFY Function Parameters

Parameter Description

c

SMTP connection

recipient

E-mail address to be verified


Return Values

Table 263-42 VRFY Function Return Values

Return Value Description

reply

Reply of the command (see REPLY, REPLIES Record Types). In cases where there are multiple replies, the last reply is returned.


Usage Notes

The server attempts to resolve the destination address recipient. If successful, it returns the recipient's full name and fully qualified mailbox path. The connection to the server must have already been established by means of OPEN_CONNECTION and HELO or EHLO before making this request.

Successful verification returns one or more lines beginning with status code 250 or 251.

WRITE_DATA Procedure

This procedure writes a portion of the e-mail message. A repeat call to WRITE_DATA appends data to the e-mail message.

Syntax

UTL_SMTP.WRITE_DATA (
   c     IN OUT NOCOPY connection, 
   data  IN VARCHAR2 CHARACTER SET ANY_CS);

Parameters

Table 263-43 WRITE_DATA Procedure Parameters

Parameter Description

c

SMTP connection

data

Portion of the text of the message to be sent, including headers, in [RFC822] format


Usage Notes

  • The calls to the OPEN_DATA Function and Procedure, WRITE_DATA Procedure, WRITE_RAW_DATA Procedure and CLOSE_DATA Function and Procedure must be made in the correct order. A program calls OPEN_DATA to send the DATA command to the SMTP server. After that, it can call WRITE_DATA or WRITE_RAW_DATA repeatedly to send the actual data. The data is terminated by calling CLOSE_DATA. After OPEN_DATA is called, the only subprograms that can be called are WRITE_DATA, WRITE_RAW_DATA, or CLOSE_DATA. A call to other subprograms results in an INVALID_OPERATION exception being raised.

  • The application must ensure that the contents of the body parameter conform to the MIME(RFC822) specification. The DATA routine terminates the message with a <CR><LF>.<CR><LF> sequence (a single period at the beginning of a line), as required by RFC821. It also translates any sequence of <CR><LF>.<CR><LF> (single period) in the body to <CR><LF>..<CR><LF> (double period). This conversion provides the transparency as described in Section 4.5.2 of RFC821.

  • The OPEN_DATA Function and Procedure, WRITE_DATA Procedure, WRITE_RAW_DATA Procedure and CLOSE_DATA Function and Procedure must be called only after OPEN_CONNECTION Functions, HELO Function and Procedure, or EHLO Function and Procedure, MAIL Function and Procedure, and RCPT Function have been called. The connection to the SMTP server must be open and a mail transaction must be active when this routine is called.

  • Note that there is no function form of the WRITE_DATA Procedure because the SMTP server does not respond until the data-terminator is sent during the call to CLOSE_DATA Function and Procedure.

  • Text (VARCHAR2) data sent using WRITE_DATA is converted to US7ASCII before it is sent. If the text contains multibyte characters, each multibyte character in the text that cannot be converted to US7ASCII is replaced by a '?' character. If 8BITMIME extension is negotiated with the SMTP server using the EHLO subprogram, multibyte VARCHAR2 data can be sent by first converting the text to RAW using the UTL_RAW package, and then sending the RAW data using WRITE_RAW_DATA.

WRITE_RAW_DATA Procedure

This procedure writes a portion of the e-mail message. A repeat call to WRITE_RAW_DATA appends data to the e-mail message.

Syntax

UTL_SMTP.WRITE_RAW_DATA (
   c     IN OUT NOCOPY connection
   data  IN RAW);

Parameters

Table 263-44 WRITE_RAW_DATA Procedure Parameters

Parameter Description

c

SMTP connection

data

Portion of the text of the message to be sent, including headers, in [RFC822] format


Usage Notes