BEA-149301(retired)
|
Error: Cannot compare passed Version object.\nexception.
Description
| Different version received. |
Cause
| This is an internal error. |
Action
| Report this error to BEA support. |
|
BEA-149302(retired)
|
Error: Delta credentials cannot be externalizable\nexception.
Description
| Failed to externalize Delta credentials. |
Cause
| This is an internal error. |
Action
| Report this error to BEA support. |
|
BEA-149303(retired)
|
Error: Delta credentials cannot be read from the outputStream\nexception.
Description
| Failed to read Delta credentials from outputStream. |
Cause
| This is an internal error. |
Action
| Report this error to BEA support. |
|
BEA-149305(retired)
|
Error: Unable to initialize Master Deployer version.
Description
| Master Deployer could not be initialized. |
Cause
| This is due to an improper server start. |
Action
| Report this error to BEA support. |
|
BEA-149306(retired)
|
Error: Deployment update failed. version
Description
| Deployment update failed. DRS was unable to connect to target. |
Cause
| This is an internal error. |
Action
| Report this error to BEA support. |
|
BEA-149307(retired)
|
Error: Deployment update failed. Update was not found by DRS version.
Description
| Deployment update failed. Update was not found by DRS. |
Cause
| This is an internal error. |
Action
| Report this error to BEA support. |
|
BEA-149308(retired)
|
Info: Task task for application app with ID id has been cancelled for target target.
Description
| Response to a cancellation request. |
Cause
| Response to a cancellation request. |
Action
| No action required. |
|
BEA-149309(retired)
|
Warning: Unable to completely remove a completed deployment task: name : desc , from the system due to reason: e
Description
| Deletion of the completed deployment task failed. |
Cause
| The deployment task might be referenced by other classes |
Action
| No action required. |
|
BEA-149310(retired)
|
Error: The cluster member 'version' cannot be targeted. Target the cluster instead.
Description
| Deployment cannot be targeted to a cluster member. |
Cause
| There was an attempt to target a cluster member. |
Action
| Target the cluster, not the cluster member. |
|
BEA-149311(retired)
|
Warning: The request to deploy 'application' to server 'server' will be deferred till the server becomes active.
Description
| A deployment request to a server that is not running will be deferred. When the server starts, it will receive the deployment request. |
Cause
| The targeted server is not running. |
Action
| No action required. The targeted server will get the deployment request at startup. |
|
BEA-149312(retired)
|
Warning: Deployment of the application 'application' to cluster 'cluster' failed because the following server(s) are unreachable: 'failedServer'. To deploy to this cluster, either start the unreachable servers or remove the unreachable servers from the cluster, then reattempt the deployment. Another workaround for this problem is to restart the admin server without the 'weblogic.ClusterConstraintsEnabled' flag or set it to 'false'. This allows you to deploy the application only to those servers that can be reached.
Description
| A deployment request to a cluster that does not have all its member servers active is rejected when the domain is not enforcing cluster constraints. |
Cause
| Not all the servers in the cluster are running. |
Action
| Start all the servers in the cluster and try deployment again, or ensure that the 'weblogic.ClusterConstraintsEnabled' flag in the admin start command line is either removed or set to 'false'. |
|
BEA-149313(retired)
|
Error: Targeting errors were detected for configured application 'app'.
Description
| This error occurs during admin server startup while deploying configured applications. The application in question contained module definitions with invalid targets (for example, a module attempted to target a cluster and a cluster member). No changes are made to the target list, but the application is reconfigured to not be deployed; its Deployed attribute is set to false. |
Cause
| The application has one or more modules defined with invalid targets. |
Action
| The specific error was logged. Use the information in that log entry to resolve the configuration error. |
|
BEA-149314(retired)
|
Warning: Cannot deploy to the following server(s) because they are unreachable: 'failedServer'. Make sure that these servers are currently shutdown. Deployment will continue on the remaining servers in the cluster 'server'. Once deployment has commenced, do not attempt to start or shutdown any servers until the application deployment completes.
Description
| Deployment to a cluster that does not have all its servers active is allowed only in development mode. Do not start/stop servers in this cluster until deployment is complete. |
Cause
| Some of the servers in the cluster are not reachable. |
Action
| Bring the unreachable server up in order for the deployment to succeed. |
|
BEA-149315(retired)
|
Warning: No server in the cluster 'server' is active. The request to deploy 'application' to cluster 'server' will be deferred till its servers become active.
Description
| There is no running server in the cluster. Deployment cannot proceed and hence will be deferred. |
Cause
| No servers in the cluster are running. |
Action
| Bring up the servers in the cluster in order for the deployment to succeed. |
|
BEA-149316(retired)
|
Warning: Application 'app' is configured with the incorrect deployment protocol. Changing to old style.
Description
| The application is configured with the TwoPhase attribute set to true. The application structure is not supported by this protocol. The application configuration is being automatically changed to TwoPhase=false to allow it to be deployed. |
Cause
| The application is not a proper EAR, yet it contains multiple modules. |
Action
| No action required. However, consider repackaging the application as a proper EAR. |
|
BEA-149317(retired)
|
Warning: Application 'app' is configured with a deprecated deployment protocol and will be deployed as such.
Description
| The application is configured with the TwoPhase attribute set to false or left unspecified. While supported, the application cannot take advantage of numerous features (such as application scoped resources) using the deprecated deployment protocol. |
Cause
| A deprecated deployment configuration was found in the domain configuration. |
Action
| No action required. However, consider reconfiguring the application to use two-phase deployment. To do so, the application must be undeployed and then deployed again using either the console or weblogic.Deployer. |
|
BEA-149318(retired)
|
Warning: Application 'app' is not deployed on target 'target'. Redeploy can be called on a target only if an application is already deployed on that target.
Description
| Application 'app' is not deployed on target 'target'. Redeploy can be called on a target only if an application is already deployed on that target. |
Cause
| An attempt to redeploy an application to a target where the application is not deployed and active. |
Action
| Use the -deploy option to deploy an application for the first time to a target. |
|