Documentation Contents

Frequently Asked Questions
JConsole and Remote Management


JConsole and JMX Remote Management

  1. I run JConsole on Windows. Why does the Local tab in Connect dialog not list any Java processes?
  2. JDK 5 jconsole and jps commands do not work if your username contains '_' (underscore) on Windows. JConsole is unable to find your Java processes.
  3. How to secure the password file on Windows systems?
  4. JConsole fails to connect to an application remotely or locally running on the same machine using the Remote Tab. However, it works when connecting to it using the Local Tab on the same machine.
  5. I am having problems using JConsole to connect to a JVM running on Linux. Connecting to JVM running on Windows and Solaris works fine.
  6. My application has remote management enabled with SSL. How to setup JConsole to connect to my application?
  7. Can I use JConsole to monitor an application through a firewall?

SNMP Based Management

  1. Where is the standard MIB for SNMP management of the Java virtual machine? What version of SNMP protocol does it require?
  2. I'm not able to see all objects the JVM MIB tree. For example, the jvmMemoryHeapUsed OID is missing. Is it a known problem?

JConsole and JMX Remote Management

  1. I run JConsole on Windows. Why does the Local tab in Connect dialog not list any Java process?

    The problem is most likely that your default Windows temporary directory is on a FAT file system. If your TMP file system is NTFS and JConsole does not show your processes, check your username as described in FAQ #2.

    For security reasons, local monitoring and management is only supported if your default Windows temporary directory is on a file system that supports setting permissions on files and directories (for example, on an NTFS file system). It is not supported on a FAT file system that provide insufficient access controls.

    A potential workaround for this issue:
    Set the TMP environment variable to refer to a directory on an NTFS file system, or any file system that supports setting permissions on files and directories before you run your application with local or remote management enabled. Note that this file system should be local to the machine. Setting this option for target applications is application specific. To set this variable in a command prompt or in a batch script, simply enter the following:

    set TMP=path

    The environment variable can be set globally by adding it to the list of environment variables in the System Properties (Control Panel->System, select the "Advanced" tab and click on the "Environment Variables" button). Through this interface, you can choose to set the variable for all processes run by the current user or globally as a system variable for all processes run by the system.

  2. JDK 5 jconsole and jps commands do not work if your username contains '_' (underscore) on Windows. JConsole is unable to find your Java processes.

    It is a known problem in JDK 5 that jconsole and jps commands do not work on Windows if your username contains '_' (underscore). Bug 6301562 will be fixed in a future release.

  3. How to secure the password file on Windows systems?

    Please see the "How to secure a password file on Windows systems" document for details.

  4. JConsole fails to connect to an application remotely or locally running on the same machine using the Remote Tab. However, it works when connecting to it using the Local Tab on the same machine.

    It is most likely a configuration problem. First, make sure your application was started with remote management enabled. (See details from the "Monitoring and Management using JMX" document.) Second, check if SSL is enabled in the management properties to enable remote management and if it is configured properly.

    SSL is enabled by default when the remote management is enabled. You can disable SSL by setting com.sun.management.jmxremote.ssl property to false. If your application is not set up with SSL properly but SSL is enabled for remote management, JConsole will fail to connect to the application. Please see "Using SSL" section in the "Monitoring and Management Using JMX" document for information about using SSL for remote management.

    If the connection failure problem occurs only when your application runs on Linux, please see FAQ #5.

  5. I am having problems using JConsole to connect to a JVM running on Linux. Connecting to JVM running on Windows and Solaris works fine.

    This is most likely a configuration problem on the Linux machine or the management properties specified to run the application. Please also see FAQ #4 about using SSL.

    You should check the following:

  6. My application has remote management enabled with SSL. How to setup JConsole to connect to my application?

    When you enable the application for remote management with SSL, you have set up a digital certificate on the system where the JMX agent (MBean server) is running and configured SSL properly.

    Assuming you created a keystore as described in the JSSE Guide and started your application (Server) as follows:

    % java -Djavax.net.ssl.keyStore=keystore \
    -Djavax.net.ssl.keyStorePassword=password Server

    To connect to this application, you need to run jconsole as follows:

    % jconsole -J-Djavax.net.ssl.trustStore=truststore \
    -J-Djavax.net.ssl.trustStorePassword=trustword
    The above configuration authenticates the server only. If client authentication is set up, you will need to provide a similar keystore for the JConsole's keys, and an appropriate truststore for the application.
  7. Can I use JConsole to monitor an application through a firewall?

    The com.sun.management.jmxremote.port management property specifies the port where the RMI Registry can be reached but the ports where the RMIServer and RMIConnection remote objects are exported is chosen by the RMI stack. To export the remote objects (RMIServer and RMIConnection) on a given port you need to create your own RMI connector server programmatically, as described in the section Mimicking Out-of-the-Box Management Using the JMX Remote API in the Java SE Monitoring and Management Guide. You must specify the JMXServiceURL as follows:

    JMXServiceURL url = new JMXServiceURL("service:jmx:rmi://localhost:" + port1 + "/jndi/rmi://localhost:" + port2 + "/jmxrmi");
    In the command above, port1 is the port number on which the RMIServer and RMIConnection remote objects are exported and port2 is the port number of the RMI Registry.

SNMP Based Management

  1. Where can I find the standard MIB for SNMP management of the Java virtual machine? What version of SNMP protocol does it require?

    The standard MIB for the Java virtual machine can be found at: http://java.sun.com/j2se/1.5.0/docs/guide/management/JVM-MANAGEMENT-MIB.mib. Some objects exposed in the JVM MIB are 64-bit quantities. To see these objects, you need to use the SNMP v2 protocol. If you can walk the JVM MIB using SNMP v1 protocol, the 64-bit objects are skipped.

  2. I'm not able to see all objects the JVM MIB tree. For example, the jvmMemoryHeapUsed OID is missing. Is it a known problem?

    The JVM MIB includes 64-bit objects which require to use the SNMP v2 protocol. All the 64-bit objects are skipped if you walk the JVM MIB using SNMP v1.


Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.

Please send comments using this Feedback page.
Oracle Corporation and/or its affiliates
Java Technology