Mod Perl Icon Mod Perl Icon mod_perl and Relational Databases


Table of Contents:

[ TOC ]
The Writing Apache Modules with Perl and C book can be purchased online from O'Reilly and Amazon.com.
Your corrections of the technical and grammatical errors are very welcome. You are encouraged to help me improve this guide. If you have something to contribute please send it directly to me.
[ TOC ]

Why Relational (SQL) Databases

Nowadays millions of people surf the Internet. There are millions of Terabytes of data lying around. To manipulate the data new smart techniques and technologies were invented. One of the major inventions was the relational database, which allows us to search and modify huge stores of data very quickly. We use SQL (Structured Query Language) to access and manipulate the contents of these databases.

[ TOC ]


Apache::DBI - Initiate a persistent database connection

When people started to use the web, they found that they needed to write web interfaces to their databases. CGI is the most widely used technology for building such interfaces. The main limitation of a CGI script driving a database is that its database connection is not persistent - on every request the CGI script has to re-connect to the database, and when the request is completed the connection is closed.

Apache::DBI was written to remove this limitation. When you use it, you have a database connection which persists for the process' entire life. So when your mod_perl script needs to use a database, Apache::DBI provides a valid connection immediately and your script starts work right away without having to initiate a database connection first.

This is possible only with CGI running under a mod_perl enabled server, since in this model the child process does not quit when the request has been served.

It's almost as straightforward as is it sounds; there are just a few things to know about and we will cover them in this section.

[ TOC ]


Introduction

The DBI module can make use of the Apache::DBI module. When it loads, the DBI module tests if the environment variable $ENV{MOD_PERL} is set, and if the Apache::DBI module has already been loaded. If so, the DBI module will forward every connect() request to the Apache::DBI module. Apache::DBI uses the ping() method to look for a database handle from a previous connect() request, and tests if this handle is still valid. If these two conditions are fulfilled it just returns the database handle.

If there is no appropriate database handle or if the ping() method fails, Apache::DBI establishes a new connection and stores the handle for later re-use. When the script is run again by a child that is still connected, Apache::DBI just checks the cache of open connections by matching the host, username and password parameters against it. A matching connection is returned if available or a new one is initiated and then returned.

There is no need to delete the disconnect() statements from your code. They won't do anything because the Apache::DBI module overloads the disconnect() method with an empty one.

[ TOC ]


When should this module be used and when shouldn't it be used?

You will want to use this module if you are opening several database connections to the server. Apache::DBI will make them persistent per child, so if you have ten children and each opens two different connections (with different connect() arguments) you will have in total twenty opened and persistent connections. After the initial connect() you will save the connection time for every connect() request from your DBI module. This can be a huge benefit for a server with a high volume of database traffic.

You must not use this module if you are opening a special connection for each of your users. Each connection will stay persistent and in a short time the number of connections will be so big that your machine will scream in agony and die.

If you want to use Apache::DBI but you have both situations on one machine, at the time of writing the only solution is to run two Apache/mod_perl servers, one which uses Apache::DBI and one which does not.

[ TOC ]


Configuration

After installing this module, the configuration is simple - add the following directive to httpd.conf

 
  PerlModule Apache::DBI

Note that it is important to load this module before any other Apache*DBI module and before the DBI module itself!

You can skip preloading DBI, since Apache::DBI does that. But there is no harm in leaving it in, as long as it is loaded after Apache::DBI.

[ TOC ]


Preopening DBI connections

If you want to make sure that a connection will already be opened when your script is first executed after a server restart, then you should use the connect_on_init() method in the startup file to preload every connection you are going to use. For example:

 
  Apache::DBI->connect_on_init
  ("DBI:mysql:myDB::myserver",
   "username",
   "passwd",
   {
    PrintError => 1, # warn() on errors
    RaiseError => 0, # don't die on error
    AutoCommit => 1, # commit executes immediately
   }
  );

As noted above, use this method only if you want all of apache to be able to connect to the database server as one user (or as a very few users), i.e. if your user(s) can effectively share the connection. Do not use this method if you want for example one unique connection per user.

Be warned though, that if you call connect_on_init() and your database is down, Apache children will be delayed at server startup, trying to connect. They won't begin serving requests until either they are connected, or the connection attempt fails. Depending on your DBD driver, this can take several minutes!

[ TOC ]


Debugging Apache::DBI

If you are not sure if this module is working as advertised, you should enable Debug mode in the startup script by:

 
  $Apache::DBI::DEBUG = 1;

Starting with ApacheDBI-0.84, setting $Apache::DBI::DEBUG = 1 will produce only minimal output. For a full trace you should set $Apache::DBI::DEBUG = 2.

After setting the DEBUG level you will see entries in the error_log both when Apache::DBI initializes a connection and when it returns one from its cache. Use the following command to view the log in real time (your error_log might be located at a different path, it is set in the Apache configuration files):

 
  tail -f /usr/local/apache/logs/error_log

I use alias (in tcsh) so I do not have to remember the path:

 
  alias err "tail -f /usr/local/apache/logs/error_log"

[ TOC ]


Database Locking Risks

Be very very careful when locking the database (LOCK TABLE ...) or singular rows if you use Apache::DBI or similar persistent connections. MySQL threads keep tables locked until the thread ends (connection is closed) or the tables are unlocked. If your session die()'s while tables are locked, they will stay neatly locked as your connection won't be closed either.

See the section Handling the 'User pressed Stop button' case for more information on prevention.

[ TOC ]


Troubleshooting

[ TOC ]


The Morning Bug

The SQL server keeps a connection to the client open for a limited period of time. In the early days of Apache::DBI developers were bitten by so called Morning bug, when every morning the first users to use the site received a No Data Returned message, but after that everything worked fine.

The error was caused by Apache::DBI returning a handle of the invalid connection (the server closed it because of a timeout), and the script was dying on that error. The ping() method was introduced to solve this problem, but it didn't worked properly till Apache::DBI version 0.82 was released. In that version and afterwards ping() was called inside the eval block, which resolved the problem.

It's possible that some DBD:: drivers don't have the ping() method implemented. The Apache::DBI manpage explains how to write one.

Another solution was found - to increase the timeout parameter when starting the database server. Currently we startup MySQL server with a script safe_mysql, so we have modified it to use this option:

 
  nohup $ledir/mysqld [snipped other options] -O wait_timeout=172800

172800 seconds is equal to 48 hours. This change solves the problem, but the ping() method works properly in DBD::mysql as well.

[ TOC ]


Opening connections with different parameters

When it receives a connection request, before it decides to use an existing cached connection, Apache::DBI insists that the new connection be opened in exactly the same way as the cached connection. If I have one script that sets LongReadLen and one that does not, Apache::DBI will make two different connections. So instead of having a maximum of 40 open connections, I can end up with 80.

However, you are free to modify the handle immediately after you get it from the cache. So always initiate connections using the same parameters and set LongReadLen (or whatever) afterwards.

[ TOC ]


Cannot find the DBI handler

You must use DBI::connect() as in normal DBI usage to get your $dbh database handler. Using the Apache::DBI does not eliminate the need to write proper DBI code. As the Apache::DBI man page states, you should program as if you are not using Apache::DBI at all. Apache::DBI will override the DBI methods where necessary and return your cached connection. Any disconnect() call will be just ignored.

[ TOC ]


Apache:DBI does not work

Make sure you have it installed.

Make sure you configured mod_perl with either:

 
  PERL_CHILD_INIT=1 PERL_STACKED_HANDLERS=1

or

 
  EVERYTHING=1

Use the example script eg/startup.pl (in the mod_perl distribution). Remove the comment from the line.

 
  # use Apache::DebugDBI;

and adapt the connect string. Do not change anything in your scripts for use with Apache::DBI.

[ TOC ]


Skipping connection cache during server startup

Does your error_log look like this?

 
  10169 Apache::DBI PerlChildInitHandler
  10169 Apache::DBI skipping connection cache during server startup
  Database handle destroyed without explicit disconnect at
  /usr/lib/perl5/site_perl/5.005/Apache/DBI.pm line 29.

If so you are trying to open a database connection in the parent httpd process. If you do, children will each get a copy of this handle, causing clashes when the handle is used by two processes at the same time. Each child must have its own, unique, connection handle.

To avoid this problem, Apache::DBI checks whether it is called during server startup. If so the module skips the connection cache and returns immediately without a database handle.

You must use the Apache::DBI->connect_on_init() method in the startup file.

[ TOC ]


Debugging code which deploys DBI

To log a trace of DBI statement execution, you must set the DBI_TRACE environment variable. The PerlSetEnv DBI_TRACE directive must appear before you load Apache::DBI and DBI.

For example if you use Apache::DBI, modify your httpd.conf with:

 
  PerlSetEnv DBI_TRACE "3=/tmp/dbitrace.log"
  PerlModule Apache::DBI

Replace 3 with the TRACE level you want. The traces from each request will be appended to /tmp/dbitrace.log. Note that the logs might interleave if requests are processed concurrently.

Within your code you can control trace generation with the trace() method:

 
  DBI->trace($trace_level)
  DBI->trace($trace_level, $trace_filename)

DBI trace information can be enabled for all handles using this DBI class method. To enable trace information for a specific handle use the similar $h->trace method.

Using the handle trace option with a $dbh or $sth is handy for limiting the trace info to the specific bit of code that you are interested in.

Trace Levels:

[ TOC ]


mysql_use_result vs. mysql_store_result.

Since many mod_perl developers use mysql as their preferred SQL engine, these notes explain the difference between mysql_use_result() and mysql_store_result(). The two influence the speed and size of the processes.

The DBD::mysql (version 2.0217) documentation includes the following snippet:

 
  mysql_use_result attribute: This forces the driver to use
  mysql_use_result rather than mysql_store_result. The former is
  faster and less memory consuming, but tends to block other
  processes. (That's why mysql_store_result is the default.)

Think about it in client/server terms. When you ask the server to spoon-feed you the data as you use it, the server process must buffer the data, tie up that thread, and possibly keep any database locks open for a long time. So if you read a row of data and ponder it for a while, the tables you have locked are still locked, and the server is busy talking to you every so often. That is mysql_use_result().

If you just suck down the whole dataset to the client, then the server is free to go about its business serving other requests. This results in parallelism since the server and client are doing work at the same time, rather than blocking on each other doing frequent I/O. That is mysql_store_result().

As the mysql manual suggests: you should not use mysql_use_result() if you are doing a lot of processing for each row on the client side. This can tie up the server and prevent other threads from updating the tables.

[ TOC ]


Optimize: Run Two SQL Engine Servers

Sometimes you end up running many databases on the same machine. These might have very varying database needs (such as one db with sessions, very frequently updated but tiny amounts of data, and another with large sets of data that's hardly ever updated) you might be able to gain a lot by running two differently configured databases on one server. One would benefit from lots of caching, the other would probably reduce the efficiency of the cache but would gain from fast disk access. Different usage profiles require vastly different performance needs.

This is basically a similar idea to having two Apache servers, each optimized for its specific requirements.

[ TOC ]


Some useful code snippets to be used with relational Databases

In this section you will find scripts, modules and code snippets to help you get started using relational Databases with mod_perl scripts. Note that I work with mysql ( http://www.mysql.com ), so the code you find here will work out of box with mysql. If you use some other SQL engine, it might work for you or it might need some changes. YMMV.

[ TOC ]


Turning SQL query writing into a short and simple task

Having to write many queries in my CGI scripts, persuaded me to write a stand alone module that saves me a lot of time in coding and debugging my code. It also makes my scripts much smaller and easier to read. I will present the module here, with examples following:

Notice the DESTROY block at the end of the module, which makes various cleanups and allows this module to be used under mod_perl and mod_cgi as well. Note that you will not get the benefit of persistent database handles with mod_cgi.

[ TOC ]


The My::DB module

My-DB.pm -- The My::DB module

(Note that you will not find this on CPAN. at least not yet :)

[ TOC ]


My::DB Module's Usage Examples

To use My::DB in your script, you first have to create a My::DB object:

 
  use vars qw($db_obj);
  my $db_obj = new My::DB or croak "Can't initialize My::DB object: $!\n";

Now you can use any of My::DB's methods. Assume that we have a table called tracker where we store the names of the users and what they are doing at each and every moment (think about an online community program).

I will start with a very simple query--I want to know where the users are and produce statistics. tracker is the name of the table.

 
    # fetch the statistics of where users are
  my $r_ary = $db_obj->sql_get_matched_rows_ary_ref
    ("tracker",
     [qw(where_user_are)],
    );
  
  my %stats = ();
  my $total = 0;
  foreach my $r_row (@$r_ary){
    $stats{$r_row->[0]}++;
    $total++;
  }

Now let's count how many users we have (in table users):

 
  my $count = $db_obj->sql_count_matched("users");

Check whether a user exists:

 
  my $username = 'stas';
  my $exists = $db_obj->sql_count_matched
  ("users",
   [username => ["=",$username]]
  );

Check whether a user is online, and get the time since she went online (since is a column in the tracker table, it tells us when a user went online):

 
  my @row = ();
  $db_obj->sql_get_matched_row
  (\@row,
   "tracker",
   ['UNIX_TIMESTAMP(since)'],
   [username => ["=",$username]]
  );
  
  if (@row) {
    my $idle = int( (time() - $row[0]) / 60);
    return "Current status: Is Online and idle for $idle minutes.";
  }

A complex query. I join two tables, and I want a reference to an array which will store a slice of the matched query (LIMIT $offset,$hits) sorted by username. Each row in the array is to include the fields from the users table, but only those listed in @verbose_cols. Then we print it out.

 
  my $r_ary = $db_obj->sql_get_matched_rows_ary_ref
    (
     "tracker STRAIGHT_JOIN users",
     [map {"users.$_"} @verbose_cols],
     [],
     ["WHERE tracker.username=users.username",
      "ORDER BY users.username",
      "LIMIT $offset,$hits"],
    );
  
  foreach my $r_row (@$r_ary){
    print ...
  }

Another complex query. The user checks checkboxes to be queried by, selects from lists and types in match strings, we process input and build the @where array. Then we want to get the number of matches and the matched rows as well.

 
  my @search_keys = qw(choice1 choice2);
  my @where = ();
    # Process the checkboxes - we turn them into a regular expression
  foreach (@search_keys) {
    next unless defined $q->param($_) and $q->param($_);
    my $regexp = "[".join("",$q->param($_))."]";
    push @where, ($_ => ['REGEXP',$regexp]);
  }
  
    # Add the items selected by the user from our lists
    # selected => exact match
  push @where,(country => ['=',$q->param('country')]) if $q->param('country');
  
    # Add the parameters typed by the user
  foreach (qw(city state)) {
    push @where,($_ => ['LIKE',$q->param($_)]) if $q->param($_);
  }
  
     # Count all that matched the query
  my $total_matched_users =  $db_obj->sql_count_matched
    (
     "users",
     \@where,
    );
  
    # Now process the orderby
  my $orderby = $q->param('orderby') || 'username';
  
     # Do the query and fetch the data
  my $r_ary = $db_obj->sql_get_matched_rows_ary_ref
  (
   "users",
   \@display_columns,
   \@where,
   ["ORDER BY $orderby",
    "LIMIT $offset,$hits"],
  );

sql_get_matched_rows_ary_ref knows to handle both ORed and ANDed params. This example shows how to use OR on parameters:

This snippet is an implementation of a watchdog. Our users want to know when their colleagues go online. They register the usernames of the people they want to know about. We have to make two queries: one to get a list of usernames, the second to find out whether any of these users is online. In the second query we use the OR keyword.

 
  # check who we are looking for
  $r_ary = $db_obj->sql_get_matched_rows_ary_ref
    ("watchdog",
     [qw(watched)],
     [username => ['=',$username)],
     ],
    );
  
    # put them into an array
  my @watched = map {$_->[0]} @{$r_ary};
  
  my %matched = ();
    # Does the user have some registered usernames?
  if (@watched) {
  
  # Try to fetch all the users who match the usernames exactly.
  # Put it into an array and compare it with a hash!
    $r_ary = $db_obj->sql_get_matched_rows_ary_ref
      ("tracker",
       [qw(username)],
       [username => ['=',\@watched],
       ]
      );
  
    map {$matched{$_->[0]} = 1} @{$r_ary};
  }
  
  # Now %matched includes the usernames of the users who are being
  # watched by $username and currently are online.
[ TOC ]


Your corrections of the technical and grammatical errors are very welcome. You are encouraged to help me improve this guide. If you have something to contribute please send it directly to me.
The Writing Apache Modules with Perl and C book can be purchased online from O'Reilly and Amazon.com.

[ TOC ]
Written by Stas Bekman.
Last Modified at 12/17/2000

mod_perl icon
Use of the Camel for Perl is
a trademark of O'Reilly & Associates,
and is used by permission.