21 Managing Users

21.1.1 How to Create a User

Using the Oracle CEP Visualizer, you can create a user.

To create a user:

1. Log on to Oracle CEP Visualizer as a user with the Admin role.

2. In the left pane, click the Domain > Security node, where Domain refers to the name of your Oracle CEP domain.

3. In the right pane, click the User tab.

   The User tab appears as Figure 21-1 shows.

   Figure 21-1 User Tab

   
   Description of "Figure 21-1 User Tab"
   
   

4. Click the New User button at the bottom of the right pane.

   The Add a User panel appears as Figure 21-2 shows.

   Figure 21-2 Add a User Panel

   
   Description of "Figure 21-2 Add a User Panel"
   
   

5. Configure the Add a User panel as Table 21-1 describes.

   Table 21-1 Add a User Panel Attributes

   Attribute	Description
   Username	Enter the name of the user.
   Password	Enter the password for this user. Passwords must be at least 6 characters in length.
   Confirm Password	Re-enter the password for this user.
   Description	An optional description for this user.
   Belong to groups	Check one or more groups to which the user belongs. The user inherits the privileges of the roles you assign to the groups. You must assign a user to at least one group. For more information, see Chapter 22, "Managing Groups".

   
   

6. Click OK.

   When the account has been successfully created, a confirmation message appears momentarily.

21.1.2 How to Edit a User

You can edit the configuration of existing users.

To edit user passwords, see Section 21.1.3, "How to Change the Password of a User".

To edit a user:

1. Log on to Oracle CEP Visualizer as a user with the Admin role.

2. In the left pane, click the Domain > Security node, where Domain refers to the name of your Oracle CEP domain.

3. In the right pane, click the User tab.

4. In the Users table, check the box to the left of the name of the user that you want to modify.

5. Click the Modify User button at the bottom of the right pane.

   The Change User panel appears as Figure 21-3 shows.

   Figure 21-3 Change User Panel

   
   Description of "Figure 21-3 Change User Panel"
   
   

6. Configure the Change User panel as Table 21-2 describes.

   Table 21-2 Change User Panel Attributes

   Attribute	Description
   Username	The name of the user. This is a read-only field.
   Password	This field is blank and read-only. To modify the password, see Section 21.1.3, "How to Change the Password of a User".
   Confirm Password	This field is blank and read-only. To modify the password, see Section 21.1.3, "How to Change the Password of a User".
   Description	Modify the optional description for this user.
   Belong to groups	Modify the groups to which the user belongs by checking or unchecking one or more of the groups displayed. Check one or more groups to which the user belongs. The user inherits the privileges of the roles you assign to the groups You must assign a user to at least one group. For more information, see Chapter 22, "Managing Groups".

   
   

7. Click OK.

21.1.3 How to Change the Password of a User

You can change the password for existing users.

To change other user configuration options, see Section 21.1.2, "How to Edit a User".

To change the password of a user:

1. Log on to Oracle CEP Visualizer as a user with the Admin role.

2. In the left pane, click the Domain > Security node, where Domain refers to the name of your Oracle CEP domain.

3. In the right pane, click the User tab.

4. In the Users table, check the boxes to the left of the name of the users that you want to delete as Figure 21-6 shows.

   Figure 21-4 Selecting a User

   
   Description of "Figure 21-4 Selecting a User"
   
   

5. Click the Change Password button at the bottom of the right pane.

   The Change Password panel appears as Figure 21-5 shows.

   Figure 21-5 Change Password Panel

   
   Description of "Figure 21-5 Change Password Panel"
   
   

6. Configure the Change Password panel as Table 21-2 describes.

   Table 21-3 Change User Panel Attributes

   Attribute	Description
   Username	The name of the user. This is a read-only field.
   Password	This field is blank. To modify the password, see Section 21.1.3, "How to Change the Password of a User".
   Confirm Password	This field is blank. To modify the password, see Section 21.1.3, "How to Change the Password of a User".

   
   

7. Click OK.

   When the password has been successfully changed, a confirmation message appears momentarily.

21.2.1 How to Delete a User

You can delete existing users. However, you cannot delete the default administrator user, which is the administrator user originally configured for the domain when it was created with the Configuration Wizard.

To delete a user:

1. Log on to Oracle CEP Visualizer as a user with the Admin role.

2. In the left pane, click the Domain > Security node, where Domain refers to the name of your Oracle CEP domain.

3. In the right pane, click the User tab.

4. In the Users table, check the boxes to the left of the name of the users that you want to delete as Figure 21-6 shows.

   Figure 21-6 Selecting a User

   
   Description of "Figure 21-6 Selecting a User"
   
   

5. Click the Delete User button at the bottom of the right pane.

   A confirmation dialog appears as Figure 21-7 shows.

   Figure 21-7 Delete User Dialog

   
   Description of "Figure 21-7 Delete User Dialog"
   
   

6. Click Yes.

   When the account has been successfully deleted, a confirmation message appears momentarily.