Oracle® Database

1 Reviewing Information About this Guide

This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:

• Administrator: Enables applications to connect to an Oracle Database instance on the local system or on a remote system. It also provides tools that enable you to administer Oracle Database.

• Runtime: Enables applications to connect to an Oracle Database instance on the local system or on a remote system.

• Instant Client: Enables you to install only the shared libraries required by Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), Pro*C, or Java database connectivity (JDBC) OCI applications. This installation type requires much less disk space as compared to the other Oracle Database Client installation types.

This guide does not describe how to install the Custom installation type.

Where to Get Additional Installation Information

For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for HP-UX Itanium.

This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

2 Logging In to the System as root

Before you install Oracle Database Client, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

• If you are installing the software from an X Window System workstation or X terminal, then:

  1. Start a local terminal session, for example, an X terminal (xterm).

  2. If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

     $ xhost fully_qualified_remote_host_name
     

     For example:

     $ xhost somehost.us.example.com
     

  3. If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

     $ telnet fully_qualified_remote_host_name
     

  4. If you are not logged in as the root user, then enter the following command to switch user to root:

     $ su -
     password:
     #
     

• If you are installing the software from a PC or other system with X server software installed, then:

  Note:

  If necessary, refer to the X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order.

  1. Start the X server software.

  2. Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

  3. Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

  4. If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

     $ su -
     password:
     

3 Checking the Hardware Requirements

The system must meet the following minimum hardware requirements:

• Memory Requirements

• System Architecture

• Disk Space Requirements

# /bin/getconf KERNEL_BITS

4 Checking the Software Requirements

Depending on the products that you intend to install, verify that the following software is installed on the system.

• Operating System Requirements

• Compiler Requirements

• Patch Requirement

• Additional Software Requirements

# uname -a

HP-UX hostname B.11.23 ia64 109444686 unlimited-user license

# /usr/sbin/swlist -l level | more

# /usr/sbin/swlist -l patch | grep PHSS_28880

# /usr/sbin/swlist -l patch | more

http://itresourcecenter.hp.com

# cd /usr/lib
# ln -s libX11.3 libX11.sl
# ln -s libXIE.2 libXIE.sl
# ln -s libXext.3 libXext.sl
# ln -s libXhp11.3 libXhp11.sl
# ln -s libXi.3 libXi.sl
# ln -s libXm.4 libXm.sl
# ln -s libXp.2 libXp.sl
# ln -s libXt.3 libXt.sl
# ln -s libXtst.2 libXtst.sl

5 Creating Required Operating System Group and User

The following local operating system group and user must exist on the system:

• The Oracle Inventory group (oinstall)

• The Oracle software owner (oracle)

To determine if this group and user already exist, and if required, to create them, follow these steps:

1. To determine if the oinstall group exists, enter the following command:

   # more /var/opt/oracle/oraInst.loc
   

   If the oraInst.loc file exists, then the output from this command is similar to the following:

   inventory_loc=/u01/app/oracle/oraInventory
   inst_group=oinstall
   

   The inst_group parameter shows the name of the Oracle Inventory group (oinstall).

2. If necessary, enter the following command to create the oinstall group:

   # /usr/sbin/groupadd oinstall
   

3. To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

   # id oracle
   

   If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group:

   uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
   

4. If necessary, complete one of the following actions:

   • If the oracle user exists, but its primary group is not oinstall, then enter a command similar to the following, where the -g option specifies oinstall as the primary group and the -G option specifies any existing groups to which the oracle user belongs:

     # /usr/sbin/usermod -g oinstall -G dba oracle
     

   • If the oracle user does not exist, then enter the following command to create it:

     # /usr/sbin/useradd -g oinstall [-G dba] oracle
     

     This command creates the oracle user and specifies:

     • oinstall as the primary group

     • dba as an optional secondary group

5. Enter the following command to set the password of the oracle user:

   # passwd oracle
   

6 Creating an Oracle Base Directory

Before you create an Oracle base directory, you must identify an appropriate file system with disk space.

To create the Oracle base directory:

1. Enter the following command to display information about all mounted file systems:

   # bdf
   

   This command displays information about all the file systems mounted on the system, including:

   • The physical device name

   • The total amount, used amount, and available amount of disk space

   • The mount point directory for that file system

2. From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.

3. Note the name of the mount point directory for each file system that you identified.

4. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

   # mkdir /mount_point/oradata
   # chown oracle:oinstall /mount_point/oradata
   # chmod 775 /mount_point/oradata
   

7 Configuring the oracle User's Environment

You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer you must configure the environment of the oracle user. To configure the environment, you must:

• Set the default file mode creation mask (umask) to 022 in the shell startup file.

• Set the DISPLAY environment variable.

To set the oracle user's environment:

1. Start a new terminal session, for example, an X terminal (xterm).

2. Enter the following command to ensure that X Window applications can display on this system:

   $ xhost fully_qualified_remote_host_name
   

   For example:

   $ xhost somehost.us.example.com
   

3. If you are not already logged in to the system where you want to install the software, then log in to that system as the oracle user.

4. If you are not logged in as the oracle user, then switch user to oracle:

   $ su - oracle
   

5. To determine the default shell for the oracle user, enter the following command:

   $ echo $SHELL
   

6. Open the oracle user's shell startup file in any text editor:

   • C shell (csh or tcsh):

     % vi .login
     

7. Enter or edit the following line, specifying a value of 022 for the default file mode creation mask:

   umask 022
   

8. If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the appropriate lines from the file.

9. Save the file, and exit from the editor.

10. To run the shell startup script, enter one of the following commands:

    • Bash shell:

      $ . ./.bash_profile
      

    • Bourne or Korn shell:

      $ . ./.profile
      

    • C shell:

      % source ./.login
      

11. If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:

    • Bourne, Bash, or Korn shell:

      $ DISPLAY=local_host:0.0 ; export DISPLAY
      

    • C shell:

      % setenv DISPLAY local_host:0.0
      

    In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).

12. If you determined that the /tmp directory has less than 400 MB of free disk space, then identify a file system with at least 400 MB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:

    1. Use the bdf command to identify a suitable file system with sufficient free space.

    2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

       $ su - root
       # mkdir /mount_point/tmp
       # chmod a+wr /mount_point/tmp
       # exit
       

    3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:

       • Bourne, Bash, or Korn shell:

         $ TMP=/mount_point/tmp
         $ TMPDIR=/mount_point/tmp
         $ export TMP TMPDIR
         

       • C shell:

         % setenv TMP /mount_point/tmp
         % setenv TMPDIR /mount_point/tmp
         

13. Enter commands similar to the following to set the ORACLE_BASE environment variable:

    • Bourne, Bash, or Korn shell:

      $ ORACLE_BASE=/u01/app/oracle
      $ export ORACLE_BASE
      

    • C shell:

      % setenv ORACLE_BASE /u01/app/oracle
      

    In these examples, /u01/app/oracle is the Oracle base directory that you created or identified earlier.

14. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

    • Bourne, Bash, or Korn shell:

      $ unset ORACLE_HOME
      $ unset TNS_ADMIN
      

    • C shell:

      % unsetenv ORACLE_HOME
      % unsetenv TNS_ADMIN
      

    Note:

    If the ORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.

15. To verify that the environment has been set correctly, enter the following commands:

    $ umask
    $ env | more
    

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

8 Mounting the Product Disc

On most HP-UX Itanium systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, follow these steps to mount it:

1. Switch user to root:

   $ su -
   password:
   

2. If necessary, enter the following command to unmount the currently mounted disc, then remove it from the drive:

   # /usr/sbin/umount /SD_DVD
   

   In this example, /SD_DVD is the mount point directory for the disc drive.

3. Insert the appropriate disc into the disc drive, then enter a command similar to the following to mount it:

   # /usr/sbin/mount -F cdfs -o rr /dev/dsk/cxtydz /SD_DVD
   

   In this example, /SD_DVD is the disc mount point directory and /dev/dsk/cxtydz is the device name for the disc device, for example /dev/dsk/c0t2d0.

4. If Oracle Universal Installer is displaying the Disk Location dialog box, enter the disc mount point directory path, for example:

   /SD_DVD
   

9 Installing Oracle Client

After configuring the oracle user's environment, start Oracle Universal Installer and install Oracle Database as follows:

• To start Oracle Universal Installer, enter the following command:

  $ /mount_point/db/runInstaller
  

  If Oracle Universal Installer does not start, then refer to Oracle Database Installation Guide for Linux for information about how to troubleshoot X Window display problems.

• The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

  • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

  • If you encounter errors while installing or linking the software, then refer to Oracle Database Installation Guide for Linux for information about troubleshooting.

  Note:

  If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.

  1. In the Select a Product to Install screen, select the product that you want to install: Oracle Database 11g, Oracle Client, or Oracle Clusterware.

     In order to install Oracle Client, select Oracle Client and click Next.

  2. In the Select Installation Type screen, select the type of installation that you want: Instant Client, Administrator, Runtime, or Custom and click Next.

  3. In the Product-specific Prerequisite Checks screen, correct any errors that Oracle Universal Installer may have found, and then click Next.

  4. In the Summary screen, check the installed components listing and click Install.

  5. If you have selected the Administrator or Runtime installation type, then Net Configuration Assistant is invoked as a part of the installation. Click Next to complete the installation You should then start the Net Configuration Assistant to complete configuration process.

  6. In the Oracle Net Configuration Assistant: Welcome screen, either select Perform typical configuration to use a default configuration, or select the Naming Methods configuration option. Then click Next. (The remaining steps in this procedure assume you are using Naming Methods.)

  7. Answer the remaining prompts to complete the configuration.

  8. On the Execute Configuration Scripts screen, read the instructions and then run the script mentioned on this screen. Click OK to continue.

  9. In the End of Installation screen, click Exit, then click Yes to exit from Oracle Universal Installer.

10 Installing Oracle Database Examples

If you plan to use the following products or features, then download and install the products from the Oracle Database Examples media:

• Oracle JDBC Development Drivers

• Oracle Database Examples

• Oracle Context Companion

• Various Oracle product demonstrations

For information about installing software and various Oracle product demonstrations from the Oracle Database Examples media, refer to Oracle Database Examples Installation Guide.

11 What to Do Next?

After you have successfully installed Oracle Client, refer to Oracle Database Client Installation Guide for HP-UX Itanium for information about required and optional postinstallation steps.

12 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at

http://www.oracle.com/accessibility/

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

TTY Access to Oracle Support Services

Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.