Java™ Platform
Standard Ed. 6

java.util
Interface Deque<E>

Type Parameters:
E - the type of elements held in this collection
All Superinterfaces:
Collection<E>, Iterable<E>, Queue<E>
All Known Subinterfaces:
BlockingDeque<E>
All Known Implementing Classes:
ArrayDeque, LinkedBlockingDeque, LinkedList

public interface Deque<E>
extends Queue<E>

A linear collection that supports element insertion and removal at both ends. The name deque is short for "double ended queue" and is usually pronounced "deck". Most Deque implementations place no fixed limits on the number of elements they may contain, but this interface supports capacity-restricted deques as well as those with no fixed size limit.

This interface defines methods to access the elements at both ends of the deque. Methods are provided to insert, remove, and examine the element. Each of these methods exists in two forms: one throws an exception if the operation fails, the other returns a special value (either null or false, depending on the operation). The latter form of the insert operation is designed specifically for use with capacity-restricted Deque implementations; in most implementations, insert operations cannot fail.

The twelve methods described above are summarized in the following table:

First Element (Head) Last Element (Tail)
Throws exception Special value Throws exception Special value
Insert addFirst(e) offerFirst(e) addLast(e) offerLast(e)
Remove removeFirst() pollFirst() removeLast() pollLast()
Examine getFirst() peekFirst() getLast() peekLast()

This interface extends the Queue interface. When a deque is used as a queue, FIFO (First-In-First-Out) behavior results. Elements are added at the end of the deque and removed from the beginning. The methods inherited from the Queue interface are precisely equivalent to Deque methods as indicated in the following table:

Queue Method Equivalent Deque Method
add(e) addLast(e)
offer(e) offerLast(e)
remove() removeFirst()
poll() pollFirst()
element() getFirst()
peek() peekFirst()

Deques can also be used as LIFO (Last-In-First-Out) stacks. This interface should be used in preference to the legacy Stack class. When a deque is used as a stack, elements are pushed and popped from the beginning of the deque. Stack methods are precisely equivalent to Deque methods as indicated in the table below:

Stack Method Equivalent Deque Method
push(e) addFirst(e)
pop() removeFirst()
peek() peekFirst()

Note that the peek method works equally well when a deque is used as a queue or a stack; in either case, elements are drawn from the beginning of the deque.

This interface provides two methods to remove interior elements, removeFirstOccurrence and removeLastOccurrence.

Unlike the List interface, this interface does not provide support for indexed access to elements.

While Deque implementations are not strictly required to prohibit the insertion of null elements, they are strongly encouraged to do so. Users of any Deque implementations that do allow null elements are strongly encouraged not to take advantage of the ability to insert nulls. This is so because null is used as a special return value by various methods to indicated that the deque is empty.

Deque implementations generally do not define element-based versions of the equals and hashCode methods, but instead inherit the identity-based versions from class Object.

This interface is a member of the Java Collections Framework.

Since:
1.6

Method Summary
 boolean add(E e)
          Inserts the specified element into the queue represented by this deque (in other words, at the tail of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available.
 void addFirst(E e)
          Inserts the specified element at the front of this deque if it is possible to do so immediately without violating capacity restrictions.
 void addLast(E e)
          Inserts the specified element at the end of this deque if it is possible to do so immediately without violating capacity restrictions.
 boolean contains(Object o)
          Returns true if this deque contains the specified element.
 Iterator<E> descendingIterator()
          Returns an iterator over the elements in this deque in reverse sequential order.
 E element()
          Retrieves, but does not remove, the head of the queue represented by this deque (in other words, the first element of this deque).
 E getFirst()
          Retrieves, but does not remove, the first element of this deque.
 E getLast()
          Retrieves, but does not remove, the last element of this deque.
 Iterator<E> iterator()
          Returns an iterator over the elements in this deque in proper sequence.
 boolean offer(E e)
          Inserts the specified element into the queue represented by this deque (in other words, at the tail of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and false if no space is currently available.
 boolean offerFirst(E e)
          Inserts the specified element at the front of this deque unless it would violate capacity restrictions.
 boolean offerLast(E e)
          Inserts the specified element at the end of this deque unless it would violate capacity restrictions.
 E peek()
          Retrieves, but does not remove, the head of the queue represented by this deque (in other words, the first element of this deque), or returns null if this deque is empty.
 E peekFirst()
          Retrieves, but does not remove, the first element of this deque, or returns null if this deque is empty.
 E peekLast()
          Retrieves, but does not remove, the last element of this deque, or returns null if this deque is empty.
 E poll()
          Retrieves and removes the head of the queue represented by this deque (in other words, the first element of this deque), or returns null if this deque is empty.
 E pollFirst()
          Retrieves and removes the first element of this deque, or returns null if this deque is empty.
 E pollLast()
          Retrieves and removes the last element of this deque, or returns null if this deque is empty.
 E pop()
          Pops an element from the stack represented by this deque.
 void push(E e)
          Pushes an element onto the stack represented by this deque (in other words, at the head of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available.
 E remove()
          Retrieves and removes the head of the queue represented by this deque (in other words, the first element of this deque).
 boolean remove(Object o)
          Removes the first occurrence of the specified element from this deque.
 E removeFirst()
          Retrieves and removes the first element of this deque.
 boolean removeFirstOccurrence(Object o)
          Removes the first occurrence of the specified element from this deque.
 E removeLast()
          Retrieves and removes the last element of this deque.
 boolean removeLastOccurrence(Object o)
          Removes the last occurrence of the specified element from this deque.
 int size()
          Returns the number of elements in this deque.
 
Methods inherited from interface java.util.Collection
addAll, clear, containsAll, equals, hashCode, isEmpty, removeAll, retainAll, toArray, toArray
 

Method Detail

addFirst

void addFirst(E e)
Inserts the specified element at the front of this deque if it is possible to do so immediately without violating capacity restrictions. When using a capacity-restricted deque, it is generally preferable to use method offerFirst(E).

Parameters:
e - the element to add
Throws:
IllegalStateException - if the element cannot be added at this time due to capacity restrictions
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

addLast

void addLast(E e)
Inserts the specified element at the end of this deque if it is possible to do so immediately without violating capacity restrictions. When using a capacity-restricted deque, it is generally preferable to use method offerLast(E).

This method is equivalent to add(E).

Parameters:
e - the element to add
Throws:
IllegalStateException - if the element cannot be added at this time due to capacity restrictions
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

offerFirst

boolean offerFirst(E e)
Inserts the specified element at the front of this deque unless it would violate capacity restrictions. When using a capacity-restricted deque, this method is generally preferable to the addFirst(E) method, which can fail to insert an element only by throwing an exception.

Parameters:
e - the element to add
Returns:
true if the element was added to this deque, else false
Throws:
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

offerLast

boolean offerLast(E e)
Inserts the specified element at the end of this deque unless it would violate capacity restrictions. When using a capacity-restricted deque, this method is generally preferable to the addLast(E) method, which can fail to insert an element only by throwing an exception.

Parameters:
e - the element to add
Returns:
true if the element was added to this deque, else false
Throws:
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

removeFirst

E removeFirst()
Retrieves and removes the first element of this deque. This method differs from pollFirst only in that it throws an exception if this deque is empty.

Returns:
the head of this deque
Throws:
NoSuchElementException - if this deque is empty

removeLast

E removeLast()
Retrieves and removes the last element of this deque. This method differs from pollLast only in that it throws an exception if this deque is empty.

Returns:
the tail of this deque
Throws:
NoSuchElementException - if this deque is empty

pollFirst

E pollFirst()
Retrieves and removes the first element of this deque, or returns null if this deque is empty.

Returns:
the head of this deque, or null if this deque is empty

pollLast

E pollLast()
Retrieves and removes the last element of this deque, or returns null if this deque is empty.

Returns:
the tail of this deque, or null if this deque is empty

getFirst

E getFirst()
Retrieves, but does not remove, the first element of this deque. This method differs from peekFirst only in that it throws an exception if this deque is empty.

Returns:
the head of this deque
Throws:
NoSuchElementException - if this deque is empty

getLast

E getLast()
Retrieves, but does not remove, the last element of this deque. This method differs from peekLast only in that it throws an exception if this deque is empty.

Returns:
the tail of this deque
Throws:
NoSuchElementException - if this deque is empty

peekFirst

E peekFirst()
Retrieves, but does not remove, the first element of this deque, or returns null if this deque is empty.

Returns:
the head of this deque, or null if this deque is empty

peekLast

E peekLast()
Retrieves, but does not remove, the last element of this deque, or returns null if this deque is empty.

Returns:
the tail of this deque, or null if this deque is empty

removeFirstOccurrence

boolean removeFirstOccurrence(Object o)
Removes the first occurrence of the specified element from this deque. If the deque does not contain the element, it is unchanged. More formally, removes the first element e such that (o==null ? e==null : o.equals(e)) (if such an element exists). Returns true if this deque contained the specified element (or equivalently, if this deque changed as a result of the call).

Parameters:
o - element to be removed from this deque, if present
Returns:
true if an element was removed as a result of this call
Throws:
ClassCastException - if the class of the specified element is incompatible with this deque (optional)
NullPointerException - if the specified element is null and this deque does not permit null elements (optional)

removeLastOccurrence

boolean removeLastOccurrence(Object o)
Removes the last occurrence of the specified element from this deque. If the deque does not contain the element, it is unchanged. More formally, removes the last element e such that (o==null ? e==null : o.equals(e)) (if such an element exists). Returns true if this deque contained the specified element (or equivalently, if this deque changed as a result of the call).

Parameters:
o - element to be removed from this deque, if present
Returns:
true if an element was removed as a result of this call
Throws:
ClassCastException - if the class of the specified element is incompatible with this deque (optional)
NullPointerException - if the specified element is null and this deque does not permit null elements (optional)

add

boolean add(E e)
Inserts the specified element into the queue represented by this deque (in other words, at the tail of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available. When using a capacity-restricted deque, it is generally preferable to use offer.

This method is equivalent to addLast(E).

Specified by:
add in interface Collection<E>
Specified by:
add in interface Queue<E>
Parameters:
e - the element to add
Returns:
true (as specified by Collection.add(E))
Throws:
IllegalStateException - if the element cannot be added at this time due to capacity restrictions
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

offer

boolean offer(E e)
Inserts the specified element into the queue represented by this deque (in other words, at the tail of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and false if no space is currently available. When using a capacity-restricted deque, this method is generally preferable to the add(E) method, which can fail to insert an element only by throwing an exception.

This method is equivalent to offerLast(E).

Specified by:
offer in interface Queue<E>
Parameters:
e - the element to add
Returns:
true if the element was added to this deque, else false
Throws:
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

remove

E remove()
Retrieves and removes the head of the queue represented by this deque (in other words, the first element of this deque). This method differs from poll only in that it throws an exception if this deque is empty.

This method is equivalent to removeFirst().

Specified by:
remove in interface Queue<E>
Returns:
the head of the queue represented by this deque
Throws:
NoSuchElementException - if this deque is empty

poll

E poll()
Retrieves and removes the head of the queue represented by this deque (in other words, the first element of this deque), or returns null if this deque is empty.

This method is equivalent to pollFirst().

Specified by:
poll in interface Queue<E>
Returns:
the first element of this deque, or null if this deque is empty

element

E element()
Retrieves, but does not remove, the head of the queue represented by this deque (in other words, the first element of this deque). This method differs from peek only in that it throws an exception if this deque is empty.

This method is equivalent to getFirst().

Specified by:
element in interface Queue<E>
Returns:
the head of the queue represented by this deque
Throws:
NoSuchElementException - if this deque is empty

peek

E peek()
Retrieves, but does not remove, the head of the queue represented by this deque (in other words, the first element of this deque), or returns null if this deque is empty.

This method is equivalent to peekFirst().

Specified by:
peek in interface Queue<E>
Returns:
the head of the queue represented by this deque, or null if this deque is empty

push

void push(E e)
Pushes an element onto the stack represented by this deque (in other words, at the head of this deque) if it is possible to do so immediately without violating capacity restrictions, returning true upon success and throwing an IllegalStateException if no space is currently available.

This method is equivalent to addFirst(E).

Parameters:
e - the element to push
Throws:
IllegalStateException - if the element cannot be added at this time due to capacity restrictions
ClassCastException - if the class of the specified element prevents it from being added to this deque
NullPointerException - if the specified element is null and this deque does not permit null elements
IllegalArgumentException - if some property of the specified element prevents it from being added to this deque

pop

E pop()
Pops an element from the stack represented by this deque. In other words, removes and returns the first element of this deque.

This method is equivalent to removeFirst().

Returns:
the element at the front of this deque (which is the top of the stack represented by this deque)
Throws:
NoSuchElementException - if this deque is empty

remove

boolean remove(Object o)
Removes the first occurrence of the specified element from this deque. If the deque does not contain the element, it is unchanged. More formally, removes the first element e such that (o==null ? e==null : o.equals(e)) (if such an element exists). Returns true if this deque contained the specified element (or equivalently, if this deque changed as a result of the call).

This method is equivalent to removeFirstOccurrence(java.lang.Object).

Specified by:
remove in interface Collection<E>
Parameters:
o - element to be removed from this deque, if present
Returns:
true if an element was removed as a result of this call
Throws:
ClassCastException - if the class of the specified element is incompatible with this deque (optional)
NullPointerException - if the specified element is null and this deque does not permit null elements (optional)

contains

boolean contains(Object o)
Returns true if this deque contains the specified element. More formally, returns true if and only if this deque contains at least one element e such that (o==null ? e==null : o.equals(e)).

Specified by:
contains in interface Collection<E>
Parameters:
o - element whose presence in this deque is to be tested
Returns:
true if this deque contains the specified element
Throws:
ClassCastException - if the type of the specified element is incompatible with this deque (optional)
NullPointerException - if the specified element is null and this deque does not permit null elements (optional)

size

int size()
Returns the number of elements in this deque.

Specified by:
size in interface Collection<E>
Returns:
the number of elements in this deque

iterator

Iterator<E> iterator()
Returns an iterator over the elements in this deque in proper sequence. The elements will be returned in order from first (head) to last (tail).

Specified by:
iterator in interface Collection<E>
Specified by:
iterator in interface Iterable<E>
Returns:
an iterator over the elements in this deque in proper sequence

descendingIterator

Iterator<E> descendingIterator()
Returns an iterator over the elements in this deque in reverse sequential order. The elements will be returned in order from last (tail) to first (head).

Returns:
an iterator over the elements in this deque in reverse sequence

Java™ Platform
Standard Ed. 6

Submit a bug or feature
For further API reference and developer documentation, see Java SE Developer Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.

Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.