MID Profile

java.io
Interface DataOutput

All Known Subinterfaces:
Datagram
All Known Implementing Classes:
DataOutputStream

public interface DataOutput

The DataOutput interface provides for converting data from any of the Java primitive types to a series of bytes and writing these bytes to a binary stream. There is also a facility for converting a String into Java modified UTF-8 format and writing the resulting series of bytes.

For all the methods in this interface that write bytes, it is generally true that if a byte cannot be written for any reason, an IOException is thrown.

Since:
JDK1.0, CLDC 1.0
See Also:
DataInput, DataOutputStream

Method Summary
 void write(byte[] b)
          Writes to the output stream all the bytes in array b.
 void write(byte[] b, int off, int len)
          Writes len bytes from array b, in order, to the output stream.
 void write(int b)
          Writes to the output stream the eight low-order bits of the argument b.
 void writeBoolean(boolean v)
          Writes a boolean value to this output stream.
 void writeByte(int v)
          Writes to the output stream the eight low- order bits of the argument v.
 void writeChar(int v)
          Writes a char value, which is comprised of two bytes, to the output stream.
 void writeChars(String s)
          Writes every character in the string s, to the output stream, in order, two bytes per character.
 void writeInt(int v)
          Writes an int value, which is comprised of four bytes, to the output stream.
 void writeLong(long v)
          Writes an long value, which is comprised of four bytes, to the output stream.
 void writeShort(int v)
          Writes two bytes to the output stream to represent the value of the argument.
 void writeUTF(String str)
          Writes two bytes of length information to the output stream, followed by the Java modified UTF representation of every character in the string s.
 

Method Detail

write

public void write(int b)
           throws IOException
Writes to the output stream the eight low-order bits of the argument b. The 24 high-order bits of b are ignored.
Parameters:
b - the byte to be written.
Throws:
IOException - if an I/O error occurs.

write

public void write(byte[] b)
           throws IOException
Writes to the output stream all the bytes in array b. If b is null, a NullPointerException is thrown. If b.length is zero, then no bytes are written. Otherwise, the byte b[0] is written first, then b[1], and so on; the last byte written is b[b.length-1].
Parameters:
b - the data.
Throws:
IOException - if an I/O error occurs.

write

public void write(byte[] b,
                  int off,
                  int len)
           throws IOException
Writes len bytes from array b, in order, to the output stream. If b is null, a NullPointerException is thrown. If off is negative, or len is negative, or off+len is greater than the length of the array b, then an IndexOutOfBoundsException is thrown. If len is zero, then no bytes are written. Otherwise, the byte b[off] is written first, then b[off+1], and so on; the last byte written is b[off+len-1].
Parameters:
b - the data.
off - the start offset in the data.
len - the number of bytes to write.
Throws:
IOException - if an I/O error occurs.

writeBoolean

public void writeBoolean(boolean v)
                  throws IOException
Writes a boolean value to this output stream. If the argument v is true, the value (byte)1 is written; if v is false, the value (byte)0 is written. The byte written by this method may be read by the readBoolean method of interface DataInput, which will then return a boolean equal to v.
Parameters:
v - the boolean to be written.
Throws:
IOException - if an I/O error occurs.

writeByte

public void writeByte(int v)
               throws IOException
Writes to the output stream the eight low- order bits of the argument v. The 24 high-order bits of v are ignored. (This means that writeByte does exactly the same thing as write for an integer argument.) The byte written by this method may be read by the readByte method of interface DataInput, which will then return a byte equal to (byte)v.
Parameters:
v - the byte value to be written.
Throws:
IOException - if an I/O error occurs.

writeShort

public void writeShort(int v)
                throws IOException
Writes two bytes to the output stream to represent the value of the argument. The byte values to be written, in the order shown, are:


 (byte)(0xff & (v >> 8))
 (byte)(0xff & v)
  

The bytes written by this method may be read by the readShort method of interface DataInput , which will then return a short equal to (short)v.

Parameters:
v - the short value to be written.
Throws:
IOException - if an I/O error occurs.

writeChar

public void writeChar(int v)
               throws IOException
Writes a char value, which is comprised of two bytes, to the output stream. The byte values to be written, in the order shown, are:


 (byte)(0xff & (v >> 8))
 (byte)(0xff & v)
 

The bytes written by this method may be read by the readChar method of interface DataInput , which will then return a char equal to (char)v.

Parameters:
v - the char value to be written.
Throws:
IOException - if an I/O error occurs.

writeInt

public void writeInt(int v)
              throws IOException
Writes an int value, which is comprised of four bytes, to the output stream. The byte values to be written, in the order shown, are:


 (byte)(0xff & (v >> 24))
 (byte)(0xff & (v >> 16))
 (byte)(0xff & (v >>    8))
 (byte)(0xff & v)
 

The bytes written by this method may be read by the readInt method of interface DataInput , which will then return an int equal to v.

Parameters:
v - the int value to be written.
Throws:
IOException - if an I/O error occurs.

writeLong

public void writeLong(long v)
               throws IOException
Writes an long value, which is comprised of four bytes, to the output stream. The byte values to be written, in the order shown, are:


 (byte)(0xff & (v >> 48))
 (byte)(0xff & (v >> 40))
 (byte)(0xff & (v >> 32))
 (byte)(0xff & (v >> 24))
 (byte)(0xff & (v >> 16))
 (byte)(0xff & (v >>  8))
 (byte)(0xff & v)
 

The bytes written by this method may be read by the readLong method of interface DataInput , which will then return a long equal to v.

Parameters:
v - the long value to be written.
Throws:
IOException - if an I/O error occurs.

writeChars

public void writeChars(String s)
                throws IOException
Writes every character in the string s, to the output stream, in order, two bytes per character. If s is null, a NullPointerException is thrown. If s.length is zero, then no characters are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. For each character, two bytes are actually written, high-order byte first, in exactly the manner of the writeChar method.
Parameters:
s - the string value to be written.
Throws:
IOException - if an I/O error occurs.

writeUTF

public void writeUTF(String str)
              throws IOException
Writes two bytes of length information to the output stream, followed by the Java modified UTF representation of every character in the string s. If s is null, a NullPointerException is thrown. Each character in the string s is converted to a group of one, two, or three bytes, depending on the value of the character.

If a character c is in the range \u0001 through \u007f, it is represented by one byte:

(byte)c 

If a character c is \u0000 or is in the range \u0080 through \u07ff, then it is represented by two bytes, to be written in the order shown:


 (byte)(0xc0 | (0x1f & (c >> 6)))
 (byte)(0x80 | (0x3f & c))
  

If a character c is in the range \u0800 through uffff, then it is represented by three bytes, to be written in the order shown:


 (byte)(0xe0 | (0x0f & (c >> 12)))
 (byte)(0x80 | (0x3f & (c >>  6)))
 (byte)(0x80 | (0x3f & c))
  

First, the total number of bytes needed to represent all the characters of s is calculated. If this number is larger than 65535, then a UTFDataFormatError is thrown. Otherwise, this length is written to the output stream in exactly the manner of the writeShort method; after this, the one-, two-, or three-byte representation of each character in the string s is written.

The bytes written by this method may be read by the readUTF method of interface DataInput , which will then return a String equal to s.

Parameters:
str - the string value to be written.
Throws:
IOException - if an I/O error occurs.

MID Profile

Submit a comment or suggestion Version 2.0 of MID Profile Specification
Java is a trademark or registered trademark of Sun Microsystems, Inc. in the US and other countries. Copyright (c) 1993-2002 Sun Microsystems, Inc. 901 San Antonio Road,Palo Alto, California, 94303, U.S.A. All Rights Reserved.