Getting Started
|
4. Building Controller Components | Contributors: - Craig R. McClanahan
- Mike Schachter
- Ted Husted
- Martin Cooper
- Ed Burns
- Donald Ball
- Eddie Bush
- Yann Cebron
- David Graham
- Tim O'Brien
- Phil Steitz
|
4.1 Overview |
Now that we understand how to construct the Model and View components
of your application, it is time to focus on the Controller
components.
Struts includes a servlet that implements the primary function of mapping
a request URI to an Action class.
Therefore, your primary responsibilities related to the Controller are:
-
Write an
ActionForm class to mediate between the Model
and the View, as described in Building
Model Components.
-
Write an
Action class for each logical request that may
be received (extend org.apache.struts.action.Action ).
-
Configure a ActionMapping (in XML) for each logical request that may
be submitted.
The XML configuration file is usually named
struts-config.xml .
To deploy your application, you will also need to:
-
Update the web application deployment descriptor file (in XML)
for your application to include the necessary Struts components.
-
Add the appropriate Struts components to your application.
The latter two items are covered in the
"Configuring Applications" chapter.
|
4.2 The ActionServlet |
For those of you familiar with MVC architecture, the ActionServlet
represents the C - the controller.
The job of the controller is to:
-
process user requests,
-
determine what the user is trying to achieve according to the request,
-
pull data from the model (if necessary) to be given to the appropriate
view, and
-
select the proper view to respond to the user.
The Struts controller delegates most of this grunt work to Action classes.
In addition to being the controller for your application, the
ActionServlet instance also is responsible for initialization and
clean-up of resources.
When the controller initializes, it first loads the application config
corresponding to the "config" init-param.
It then goes through an enumeration of all init-param
elements, looking for those elements who's name starts with
config/ .
For each of these elements, Struts loads the configuration file specified
by the value of that init-param , and assigns a "prefix"
value to that module's ApplicationConfig instance consisting of the piece
of the init-param name following "config/".
For example, the module prefix specified by the
init-param config/foo would be "foo".
This is important to know, since this is how the controller determines
which module will be given control of processing the request.
To access the module foo, you would use a URL like:
http://localhost:8080/myApp/foo/someAction.do
For each request made of the controller, the method
process(HttpServletRequest, HttpServletResponse) will be
called.
This method simply determines which module should service the request and
then invokes that module's RequestProcessor's process method, passing the
same request and response.
|
4.2.1 Request Processor |
The RequestProcessor is where the majority of the core processing
occurs for each request.
Let's take a look at the helper functions the process method invokes
in-turn:
|
|
processPath
|
Determine the path that invoked us.
This will be used later to retrieve an ActionMapping.
|
processLocale
|
Select a locale for this request, if one hasn't already been
selected, and place it in the request.
|
processContent
|
Set the default content type (with optional character encoding) for
all responses if requested.
|
processNoCache
|
If appropriate, set the following response headers: "Pragma",
"Cache-Control", and "Expires".
|
processPreprocess
|
This is one of the "hooks" the RequestProcessor makes available for
subclasses to override.
The default implementation simply returns true .
If you subclass RequestProcessor and override processPreprocess you
should either return true (indicating process should
continue processing the request) or false (indicating
you have handled the request and the process should return)
|
processMapping
|
Determine the ActionMapping associated with this path.
|
processRoles
|
If the mapping has a role associated with it, ensure the requesting
user is has the specified role.
If they do not, raise an error and stop processing of the request.
|
processActionForm
|
Instantiate (if necessary) the ActionForm associated with this
mapping (if any) and place it into the appropriate scope.
|
processPopulate
|
Populate the ActionForm associated with this request, if any.
|
processValidate
|
Perform validation (if requested) on the ActionForm associated with
this request (if any).
|
processForward
|
If this mapping represents a forward, forward to the path specified
by the mapping.
|
processInclude
|
If this mapping represents an include, include the result of
invoking the path in this request.
|
processActionCreate
|
Instantiate an instance of the class specified by the current
ActionMapping (if necessary).
|
processActionPerform
|
This is the point at which your action's perform or
execute method will be called.
|
processForwardConfig
|
Finally, the process method of the RequestProcessor takes the
ActionForward returned by your Action class, and uses to select the
next resource (if any).
Most often the ActionForward leads to the presentation page that
renders the response.
|
|
4.3 ActionForm Classes |
An ActionForm represents an HTML form that the user interacts with over
one or more pages.
You will provide properties to hold the state of the form with getters
and setters to access them.
ActionForms can be stored in either the session (default) or request
scopes.
If they're in the session it's important to implement the form's
reset method to initialize the form before each use.
Struts sets the ActionForm's properties from the request parameters and
sends the validated form to the appropriate Action's execute
method.
When you code your ActionForm beans, keep the following
principles in mind:
-
The
ActionForm class itself requires no specific
methods to be implemented.
It is used to identify the role these particular beans play in the overall
architecture.
Typically, an ActionForm bean will have only property getter
and property setter methods, with no business logic.
-
The ActionForm object also offers a standard validation mechanism.
If you override a "stub" method, and provide error messages in the
standard application resource, Struts will automatically validate the
input from the form (using your method).
See "
Action Form Validation" for details.
Of course, you can also ignore the ActionForm validation and provide your
own in the Action object.
-
Define a property (with associated
getXxx and
setXxx methods) for each field that is present in the
form.
The field name and property name must match according to the usual
JavaBeans conventions (see the Javadoc for the
java.beans.Introspector class for a start on information
about this).
For example, an input field named username will cause the
setUsername method to be called.
-
Buttons and other controls on your form can also be defined as properties.
This can help determine which button or control was selected when the
form was submitted.
Remember, the ActionForm is meant to represent your data-entry form, not
just the data beans.
-
Think of your ActionForm beans as a firewall between HTTP and the Action.
Use the
validate method to ensure all required properties
are present, and that they contain reasonable values.
An ActionForm that fails validation will not even be presented to the
Action for handling.
-
You may also place a bean instance on your form, and use nested property
references.
For example, you might have a "customer" bean on your ActionForm, and
then refer to the property "customer.name" in your presentation page.
This would correspond to the methods
customer.getName() and
customer.setName(string Name) on your customer bean.
See the Tag Library Developer Guides for more about using nested syntax
with the Struts JSP tags.
-
Caution: If you nest an existing bean instance on your form, think
about the properties it exposes.
Any public property on an ActionForm that accepts a single String value
can be set with a query string.
It may be useful to place beans that can affect the business state inside
a thin "wrapper" that exposes only the properties required.
This wrapper can also provide a filter to be sure runtime properties are
not set to inappropriate values.
|
4.3.1 DynaActionForm Classes |
Maintaining a separate concrete ActionForm class for each form in your
Struts application is time-consuming.
It is particularly frustrating when all the ActionForm does is gather
and validate simple properties that are passed along to a business
JavaBean.
This bottleneck can be alleviated through the use of DynaActionForm classes.
Instead of creating a new ActionForm subclass and new get/set methods for
each of your bean's properties, you can list its properties, type, and
defaults in the Struts configuration file.
For example, add the following to struts-config.xml for a UserForm bean
that stores a user's given and family names:
<form-bean
name="UserForm"
type="org.apache.struts.action.DynaActionForm">
<form-property
name="givenName"
type="java.lang.String"
initial="John"/>
<form-property
name="familyName"
type="java.lang.String"
initial="Smith"/>
</form-bean>
The types supported by DynaActionForm include:
-
java.lang.BigDecimal
-
java.lang.BigInteger
-
boolean and java.lang.Boolean
-
byte and java.lang.Byte
-
char and java.lang.Character
-
java.lang.Class
-
double and java.lang.Double
-
float and java.lang.Float
-
int and java.lang.Integer
-
long and java.lang.Long
-
short and java.lang.Short
-
java.lang.String
-
java.sql.Date
-
java.sql.Time
-
java.sql.Timestamp
You may also specify Arrays of these types (e.g. String[] ).
You may also specify a concrete implementation of the Map Interface,
such as java.util.HashMap ,
or a List implementation, such as java.util.ArrayList .
If you do not supply an initial attribute, numbers will be initialized to
0 and objects to null .
In JSP pages using the original Struts custom tags, attributes of
DynaActionForm objects can be referenced just like ordinary
ActionForm objects. Wherever a Struts tag refers to a
"property", the tags will automatically use the DynaActionForm properties
just like those of a conventional JavaBean.
You can even expose DynaActionForm properties using bean:define.
(Although, tou can't use bean:define to instantiate a DynaActionForm,
since it needs to be setup with the appropriate dyna-properties).
If you are using the Struts JSTL EL taglib, the references are different,
however.
Only properties of ordinary ActionForm objects can be directly
accessed through the JSTL expression language syntax.
The DynaActionForm properties must be accessed through a
slightly different syntax.
The JSTL EL syntax for referencing a property
of an ActionForm goes like this:
${formbean.prop}
The syntax for referencing a property of a DynaActionForm
would be:
${dynabean.map.prop}
The map property is a property of
DynaActionForm which represents the HashMap
containing the DynaActionForm properties.
DynaActionForms are meant as an easy solution to a common problem:
Your ActionForms use simple properties and standard validations,
and you just pass these properties over to another JavaBean
(say using BeanUtils.copyProperties(myBusinessBean,form) ).
DynaActionForms are not a drop-in replacement for ActionForms.
If you need to access ActionForm properties in your Action, you will need to
use the map-style accessor, like myForm.get("name") .
If you actively use the ActionForm object in your Action,
then you may want to use conventional ActionForms instead.
DynaActionForms cannot be instantiated using a no-argument constructor.
In order to simulate the extra properties,
there is a lot of machinery involved in their construction.
You must rely on Struts to instantiate a DynaActionForm for you,
via the ActionMapping.
If need be, you can extend the DynaActionForm to add custom
validate and reset methods you might need.
Simply specify your subclass in the struts-config instead.
However, you cannot mix conventional properties and DynaProperties.
A conventional getter or setter on a DynaActionForm won't be found
by the reflection utilities.
To use DynaActionForms with the Struts Validator, specify
org.apache.struts.validator.ValidatorActionForm
(or your subclass) as the form-bean class.
|
4.3.2 Map-backed ActionForms |
The DynaActionForm classes offer the ability to create ActionForm beans
at initialization time, based on a list of properties enumerated in the
Struts configuration file.
However, many HTML forms are generated dynamically at request time.
Since the properties of these forms' ActionForm beans are not all known
ahead of time, we need a new approach.
Struts allows you to make one or more of your ActionForm's properties'
values a Map instead of a traditional atomic object.
You can then store the data from your form's dynamic fields in that Map.
Here is an example of a map-backed ActionForm class:
public FooForm extends ActionForm {
private final Map values = new HashMap();
public void setValue(String key, Object value) {
values.put(key, value);
}
public Object getValue(String key) {
return values.get(key);
}
}
In its corresponding JSP page, you can access objects stored in the
values map using a special notation: mapname(keyname) .
The parentheses in the bean property name indicate that:
-
the bean property named
mapname is indexed using Strings
(probably backed by a Map), and that
-
Struts should look for get/set methods that take a String key
parameter to find the correct sub-property value.
Struts will, of course, use the
keyname value from the
parentheses when it calls the get/set methods.
Here is a simple example:
<html:text property="value(foo)"/>
This will call the getValue method on FooForm with a key
value of "foo " to find the property value.
To create a form with dynamic field names, you could do the following:
<% for (int i=0; i<10; i++) {
String name = "value(foo-" + i + ")";
<html:text property="<%=name%>"/><br/>
%>
Note that there is nothing special about the name value .
Your map-backed property could instead be named property ,
thingy , or any other bean property name you prefer.
You can even have multiple map-backed properties on the same bean.
In addition to map-backed properties, you can also create list-backed
properties.
You do so by creating indexed get/set methods on your bean:
public FooForm extends ActionForm {
private final List values = new ArrayList();
public void setValue(int key, Object value) {
values.set(key, value);
}
public Object getValue(int key) {
return values.get(key);
}
}
In your presentation pages, you access individual entries in a list-backed
property by using a different special notation:
listname[index] .
The braces in the bean property name indicate that the bean property named
listname is indexed (probably backed by a List), and that
Struts should look for get/set methods that take an index parameter in
order to find the correct sub-property value.
|
4.4 Action Classes |
The Action class defines two methods that could be
executed depending on your servlet environment:
public ActionForward execute(ActionMapping mapping,
ActionForm form,
ServletRequest request,
ServletResponse response)
throws Exception;
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception;
Since the majority of Struts projects are focused on building web
applications, most projects will only use the "HttpServletRequest"
version.
A non-HTTP execute() method has been provided for applications that are
not specifically geared towards the HTTP protocol.
The goal of an Action class is to process a request, via
its execute method, and return an ActionForward
object that identifies where control should be forwarded (e.g. a JSP,
Tile definition, Velocity template, or another Action) to provide the
appropriate response.
In the MVC/Model 2 design pattern, a typical Action
class will often implement logic like the following in its
execute method:
-
Validate the current state of the user's session (for example,
checking that the user has successfully logged on).
If the
Action class finds that no logon exists, the
request can be forwarded to the presentation page that displays the
username and password prompts for logging on.
This could occur because a user tried to enter an application "in the
middle" (say, from a bookmark), or because the session has timed out,
and the servlet container created a new one.
-
If validation is not complete, validate the form bean properties as
needed.
If a problem is found, store the appropriate error message keys as a
request attribute, and forward control back to the input form so that
the errors can be corrected.
-
Perform the processing required to deal with this request (such as
saving a row into a database).
This can be done by logic code embedded within the
Action class itself, but should generally be
performed by calling an appropriate method of a business logic bean.
-
Update the server-side objects that will be used to create the next
page of the user interface (typically request scope or session scope
beans, depending on how long you need to keep these items available).
-
Return an appropriate
ActionForward object that
identifies the presentation page to be used to generate this response,
based on the newly updated beans.
Typically, you will acquire a reference to such an object by calling
findForward on either the ActionMapping
object you received (if you are using a logical name local to this
mapping), or on the controller servlet itself (if you are using a
logical name global to the application).
In Struts 1.0, Actions called a perform method instead of
the now-preferred execute method.
These methods use the same parameters and differ only in which exceptions
they throw.
The elder perform method throws SerlvetException
and IOException .
The new execute method simply throws Exception .
The change was to facilitate the Declarative Exception handling feature
introduced in Struts 1.1.
The perform method may still be used in Struts 1.1 but is
deprecated.
The Struts 1.1 method simply calls the new execute method
and wraps any Exception thrown as a
ServletException .
|
4.4.1 Action Class Design Guidelines |
Remember the following design guidelines when coding Action
classes:
-
Write code for a multi-threaded environment -
The controller servlet creates only one instance of your
Action class, and uses this one instance to service
all requests.
Thus, you need to write thread-safe Action classes.
Follow the same guidelines you would use to write thread-safe
Servlets.
Here are two general guidelines that will help you write scalable,
thread-safe Action classes:
-
Only Use Local Variables - The most important principle
that aids in thread-safe coding is to use only local variables,
not instance variables, in your
Action class.
Local variables are created on a stack that is assigned (by your
JVM) to each request thread, so there is no need to worry about
sharing them.
An Action can be factored into several local methods,
so long as all variables needed are passed as method parameters.
This assures thread safety, as the JVM handles such variables
internally using the call stack which is associated with a single
Thread.
-
Conserve Resources - As a general rule, allocating scarce
resources and keeping them across requests from the same user
(in the user's session) can cause scalability problems.
For example, if your application uses JDBC and you allocate a
separate JDBC connection for every user, you are probably going
to run in some scalability issues when your site suddenly shows
up on Slashdot.
You should strive to use pools and release resources (such as
database connections) prior to forwarding control to the
appropriate View component -- even if a bean method you have
called throws an exception.
-
Don't throw it, catch it! - Ever used a commercial website only to
have a stack trace or exception thrown in your face after you've already
typed in your credit card number and clicked the purchase button?
Let's just say it doesn't inspire confidence.
Now is your chance to deal with these application errors - in the
Action class.
If your application specific code throws expections you should catch these
exceptions in your Action class, log them in your application's log
(servlet.log("Error message", exception) ) and return the
appropriate ActionForward.
It is wise to avoid creating lengthy and complex Action classes.
If you start to embed too much logic in the Action class
itself, you will begin to find the Action class hard to
understand, maintain, and impossible to reuse.
Rather than creating overly complex Action classes, it is generally a
good practice to move most of the persistence, and "business logic" to a
separate application layer.
When an Action class becomes lengthy and procedural, it may be a good time
to refactor your application architecture and move some of this logic
to another conceptual layer;
otherwise, you may be left with an inflexible application which can only
be accessed in a web-application environment.
Struts should be viewed as simply the foundation for implementing
MVC in your applications.
Struts provides you with a useful control layer, but it is not a fully
featured platform for building MVC applications, soup to nuts.
The MailReader example application included with Struts stretches this design
principle somewhat, because the business logic itself is embedded in the
Action classes.
This should be considered something of a bug in the design of the example,
rather than an intrinsic feature of the Struts architecture, or an
approach to be emulated.
In order to demonstrate, in simple terms, the different ways Struts can be
used, the MailReader application does not always follow best practices.
|
4.5 Exception Handler |
You can define an ExceptionHandler to execute when an Action's
execute method throws an Exception.
First, you need to subclass
org.apache.struts.action.ExceptionHandler and override the
execute method.
Your execute method should process the Exception and return
an ActionForward object to tell Struts where to forward to next.
Then you configure your handler in struts-config.xml like this:
<global-exceptions>
<exception
key="some.key"
type="java.io.IOException"
handler="com.yourcorp.ExceptionHandler">
</global-exceptions>
This configuration element says that
com.yourcorp.ExceptionHandler.execute will be called when
any IOException is thrown by an Action.
The key is a key into your message resources properties file
that can be used to retrieve an error message.
You can override global exception handlers by defining a handler inside an
action definition.
A common use of ExceptionHandlers is to configure one for
java.lang.Exception so it's called for any exception and log
the exception to some data store.
|
4.6 PlugIn Classes |
The PlugIn interface extends Action and so that applications can
easily hook into the ActionServlet lifecycle.
This interface defines two methods, init() and
destroy() , which are called at application startup and
shutdown, respectively.
A common use of a Plugin Action is to configure or load
application-specific data as the web application is starting up.
At runtime, any resource setup by init would be accessed by
Actions or business tier classes.
The PlugIn interface allows you to setup resources, but does not provide
any special way to access them.
Most often, the resource would be stored in application context, under
a known key, where other components can find it.
PlugIns are configured using <plug-in> elements within the
Struts configuration file.
See PlugIn Configuration
for details.
|
4.7 The ActionMapping Implementation |
In order to operate successfully, the Struts controller servlet needs
to know several things about how each request URI should be mapped to an
appropriate Action class.
The required knowledge has been encapsulated in a Java class named
ActionMapping, the most important properties are as follows:
-
type - Fully qualified Java class name of the Action
implementation class used by this mapping.
-
name - The name of the form bean defined in the config file
that this action will use.
-
path - The request URI path that is matched to select this
mapping.
See below for examples of how matching works.
-
unknown - Set to true if this action
should be configured as the default for this application, to handle
all requests not handled by another action.
Only one action can be defined as a default within a single application.
-
validate - Set to true if the
validate method of the action associated with this mapping
should be called.
-
forward - The request URI path to which control is passed
when this mapping is invoked.
This is an alternative to declaring a type property.
|
4.8 Writing Action Mappings |
How does the controller servlet learn about the mappings you want?
It would be possible (but tedious) to write a small Java class that simply
instantiated new ActionMapping instances, and called all of
the appropriate setter methods.
To make this process easier, Struts uses the Jakarta-Digester component
to parse an XML-based description of the desired mappings and create the
appropriate objects initialized to the appropriate default values.
See the Jakarta Commons
website for more information about the Digester.
The developer's responsibility is to create an XML file named
struts-config.xml and place it in the WEB-INF directory of
your application.
This format of this document is described by the Document Type Definition
(DTD) maintained at
http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd.
This chapter covers the configuration elements that you will typically
write as part of developing your application.
There are several other elements that can be placed in the
struts-config file to customize your application.
See "Configuring Applications" for more
about the other elements in the Struts configuration file.
The controller uses an internal copy of this document to parse the
configuration; an Internet connection is not required for operation.
The outermost XML element must be <struts-config> .
Inside of the <struts-config> element, there are three important
elements that are used to describe your actions:
-
<form-beans>
-
<global-forwards>
-
<action-mappings>
<form-beans>
This section contains your form bean definitions.
Form beans are descriptors that are used to create ActionForm instances
at runtime.
You use a <form-bean> element for each form bean, which has the
following important attributes:
-
name : A unique identifier for this bean, which will be
used to reference it in corresponding action mappings.
Usually, this is also the name of the request or session attribute
under which this form bean will be stored.
-
type : The fully-qualified Java classname of the
ActionForm subclass to use with this form bean.
<global-forwards>
This section contains your global forward definitions.
Forwards are instances of the ActionForward class returned from an
ActionForm's execute method.
These map logical names to specific resources (typically JSPs), allowing
you to change the resource without changing references to it throughout
your application.
You use a <forward> element for each forward
definition, which has the following important attributes:
-
name : The logical name for this forward.
This is used in your ActionForm's execute method to
forward to the next appropriate resource.
Example: homepage
-
path : The context relative path to the resource.
Example: /index.jsp or /index.do
-
redirect : True or false
(default).
Should the ActionServlet redirect to the resource instead of forward?
<action-mappings>
This section contains your action definitions.
You use an <action> element for each of the mappings
you would like to define.
Most action elements will define at least the following attributes:
-
path : The application context-relative path to the
action.
-
type : The fully qualified java classname of your
Action class.
-
name : The name of your
<form-bean> element to use with this action
Other often-used attributes include:
-
parameter : A general-purpose attribute often used by
"standard" Actions to pass a required property.
-
roles : A comma-delimited list of the user security roles
that can access this mapping.
For a complete description of the elements that can be used with the
action element, see the
Struts Configuration DTD and the
ActionMapping
documentation.
|
4.8.1 ActionMapping Example |
Here's a mapping entry based on the MailReader example
application. The MailReader application now uses DynaActionForms.
But in this example, we'll show a conventinal
ActionForm instead, to illustrate the usual workflow.
Note that the entries for all the other actions are left out:
<struts-config>
<form-beans>
<form-bean
name="logonForm"
type="org.apache.struts.webapp.example.LogonForm" />
</form-beans>
<global-forwards
type="org.apache.struts.action.ActionForward">
<forward
name="logon"
path="/logon.jsp"
redirect="false" />
</global-forwards>
<action-mappings>
<action
path="/logon"
type="org.apache.struts.webapp.example.LogonAction"
name="logonForm"
scope="request"
input="/logon.jsp"
unknown="false"
validate="true" />
</action-mappings>
</struts-config>
First the form bean is defined.
A basic bean of class "org.apache.struts.webapp.example.LogonForm "
is mapped to the logical name "logonForm ".
This name is used as a request attribute name for the form
bean.
The "global-forwards " section is used to create logical name
mappings for commonly used presentation pages.
Each of these forwards is available through a call to your action mapping
instance, i.e. mapping.findForward("logicalName") .
As you can see, this mapping matches the path /logon
(actually, because the MailReader example application uses extension
mapping, the request URI you specify in a JSP page would end in
/logon.do ).
When a request that matches this path is received, an instance of the
LogonAction class will be created (the first time only) and used.
The controller servlet will look for a bean in request scope under key
logonForm , creating and saving a bean of the specified class
if needed.
Optional but very useful are the local "forward " elements.
In the MailReader example application, many actions include a local
"success" and/or "failure" forward as part of an action mapping.
<!-- Edit mail subscription -->
<action
path="/editSubscription"
type="org.apache.struts.webapp.example.EditSubscriptionAction"
name="subscriptionForm"
scope="request"
validate="false">
<forward
name="failure"
path="/mainMenu.jsp"/>
<forward
name="success"
path="/subscription.jsp"/>
</action>
Using just these two extra properties, the Action classes are almost
totally independent of the actual names of the presentation pages.
The pages can be renamed (for example) during a redesign, with negligible
impact on the Action classes themselves.
If the names of the "next" pages were hard coded into the Action classes,
all of these classes would also need to be modified.
Of course, you can define whatever local forward properties
makes sense for your own application.
The Struts configuration file includes several other elements that you
can use to customize your application.
See "Configuring Applications" for details.
|
4.9 Using ActionMappings for Pages |
Fronting your pages with ActionMappings is essential when using
application modules, since doing so is the only way you involve the
controller in the request -- and you want to!
The controller puts the application configuration in the request,
which makes available all of your module-specific configuration data
(including which message resources you are using, request-processor,
datasources, and so forth).
The simplest way to do this is to use the forward property
of the ActionMapping:
<action path="/view" forward="/view.jsp"/>
|
4.10 Commons Logging Interface |
Struts doesn't configure logging itself -- it's all done by
commons-logging
under the covers.
The default algorithm is a search:
-
If Log4J is there, use it.
-
If JDK 1.4 is there, use it.
-
Otherwise, use SimpleLog.
The commons-logging interface is an ultra-thin bridge to many
different logging implementations.
The intent is to remove compile- and run-time dependencies on any
single logging implementation.
For more information about the currently-supported implementations,
please refer to the
the description for the org.apache.commons.logging
package.
Because Struts uses commons-logging and, therefore, includes the necessary
JAR files for you to use commons-logging, you've probably had the
occasional fleeting thought, "Should I use
commons-logging?"
The answer (surprise!) depends on the requirements for your particular
project.
If one of your requirements is the ability to easily change logging
implementations with zero impact on your application, then commons-logging
is a very good option.
"Great! What do I do to get started using commons-logging in my own
code?"
Using commons-logging in your own code is very simple - all you need are
two imports and a declaration for a logger.
Let's take a look:
package com.foo;
// ...
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
...
public class Foo {
// ...
private static Log log = LogFactory.getLog(Foo.class);
// ...
public void setBar(Bar bar) {
if (log.isTraceEnabled()) {
log.trace("Setting bar to " + bar);
}
this.bar = bar;
}
// ...
}
The general idea is to instantiate a single logger per class and to
use a name for the logger which reflects where it's being used. The
example is constructed with the class itself. This gives the
logger the name of com.foo.Foo. Doing things this way lets you
easily see where the output is coming from, so you can quickly
pin-point problem areas. In addition, you are able to enable/disable
logging in a very fine-grained way.
For examples of using logging in Struts classes, see the
Action classes in the Struts MailReader example application.
|
|